Vista Sync Problem - 8525, TyTN, MDA Vario II, JasJam General

Hi,
Previously I was running Black 3.0 and was synching with Vista and had no problems.
I recently updated the ROM to Black Satin and now I cannot sync.
When I connect the device to my computer it initially recognises it and gives an option to create a partnership but then it disappears and it says that no device is connected.
Does anyone have an idea of what could be wrong or of ways of fixing it?
Thanks.

Also..
I have followed the guide here http://www.mrvanx.org/hermes_guide/vista/index.html for vista and I get an error installing the drivers (error attached).
I have also turned off advanced usb networking..

spathi said:
Hi,
Previously I was running Black 3.0 and was synching with Vista and had no problems.
I recently updated the ROM to Black Satin and now I cannot sync.
When I connect the device to my computer it initially recognises it and gives an option to create a partnership but then it disappears and it says that no device is connected.
Does anyone have an idea of what could be wrong or of ways of fixing it?
Thanks.
Click to expand...
Click to collapse
First, be sure you're running the latest WMDC 6.1. Then reboot both the computer and the device. If that doesn't fix it, click on Start -> Settings -> Connections -> USB to PC and check or uncheck "Enable advanced network functionality".
Then... report back.

yup I have done all that
Rebooted about 20 times (pc+device) even tried reflashing different roms but still no go!
Have unchecked advanced networking..

Make sure you have the right driver from VistaRUU.zip floating around. I did these exact steps last night and am also running Black Satin. I don't have a problem. Be sure to re-check the box that says allow USB connections.
Good luck. Try going over all the steps in case you might have missed something.
Spathi, in your case, you may just need to re-download the Hermes USB drivers.
P.S. I did also update my SPL to HardSPL2.0

I have tried installing the drivers numerous times.
I have tried the drivers from here http://forum.xda-developers.com/attachment.php?attachmentid=33892&d=1170385335 and here
http://mahmood1.com/Documents/64bit.rar
I am on 64bit Vista and have downloaded the 64bit drivers and turned off driver signing..
My phone has SPL 2.10lipro which I believe is the latest?

spathi said:
I have tried installing the drivers numerous times.
I have tried the drivers from here http://forum.xda-developers.com/attachment.php?attachmentid=33892&d=1170385335 and here
http://mahmood1.com/Documents/64bit.rar
I am on 64bit Vista and have downloaded the 64bit drivers and turned off driver signing..
My phone has SPL 2.10lipro which I believe is the latest?
Click to expand...
Click to collapse
i had the same problem a little while ago. search my user name for posts and you'll find the thread. but the solution was... uninstall wmdc reboot, and download and reinstall. works like a charm.

I HAD the same problem.
OK.. I had the same problems, troubleshooting with MS for $35.00 didn't solve it. The one thing that did solve it is kind of ridiculous and easy.. So here's the solution..
It turns out Vista has issues with detecting USB drivers on certain types of chipsets. It looks like the USB ports are correctly installed, but it just doesn't like the devices (like Smartphones) connected to it.
I solved the problem by buying a USB card with a VIA chipset. It's amazing how well it works now. Of course, I discover this AFTER a reinstall of Vista and everything else.. Duh! Ugh!
Hope this helps other people feel less pain.
-Percy

I have tried the uninstall/reinstall thing before (just tried it again) no luck there.
I just tried another usb card and that didnt work either.
Only thing I haven't tried is reinstalling windows...

mine is more weird
upgraded from wmdc 6.0 to 6.1.6965 now when it bootloader, wmdc doesn't even connect at all. even return to wmdc 6.0 doesn't solve the problem

There are a couple of things with Vista..
I figured out these few little nuggets during my travels..
1. Make sure you have all the newest updates. (MS apparently knows of this problem as they have released a patch to resolve some USB issues)
2. The external USB Card you try has to have the VIA USB Drivers.
3. Update your bios to something newer (also a big problem)
4. Turn on Legacy Support for USB (important too)
5. Disable your ACPI if you're having troubles.
6. Have you tried connecting the device directly to the MOBO USB Ports?
I can't stress this enough.. the VIA USB Chipset seems to work so if you try an external card, make sure it has a VIA chipset on it. They're completely different than the standard Vista USB Drivers.

For those that are having problems - check on your desktop system in the device manager to see if you have the "Microsoft Remote Mobile Adapter" installed as a network card. If you do, uninstall it. This driver gets in the way of the WMDC 6.1 connection with USB.
It apparently gets loaded if you attach your device while having "advanced networking" enabled in the PC->USB setup on the device. Once you've done that, you're stuck. Turning off the "advanced networking" on the device won't help, because that remote driver is already loaded. You need to disconnect your device, unstall that driver, be sure "advanced networking" is turned off, and then connect your device again. I've had this happen a couple of times to me after re-flashing the ROMs.
Brian.

I've been searching a lot about this and just can't figure it out... I can sync my tytn (8525 as I call it) with windows media player, but can't do it with "windows mobile device center". Actually, everytime I click on wmdc, it opens up the "Change Connections SEttings" where it says "Device Connected" up top but then I click on ok and apparently nothing happens...

Related

Getting "usb device not recognized" on Vista

When I plug my Universal (a Qtek 9000) into my computer with Vista Business on it using a USB cable I get a "usb device not recognized" message popping up and it fails to recognize the device and does not install any drivers for it. So now I have a "unknown device" in my device manager.
I have installed the latest version of Windows Mobile Device Center (WMDC) and if I connect via Bluetooth I can sync just fine, no problem.
However, with the USB cable, no such luck.
I have tried to upgrade the drivers on the "unknown device" and set it to browse "c:\windows" and all subfolders but it just tells me that I have the newest driver for "unknown device" allready installed...
It charges just fine with the USB cable.
Does anyone have any hints on how I might solve this problem?
Resolved?
Hi mate,
did you get this issue resolved? Getting the same thing from my MDA Pro?
Charges fine but getting USB device not recognized error.
Nope.
Nope, never did. Ended up scrapping it in the end and now I'm using the HTC Cruse Touch. Haven't tried that on Vista yet though.
OK cheers mate, Looks like i'll have to do the same!
All I want is to be able to unlock it so I can use it on O2!!!!
Maybe you have to set in settings > connections > USB to PC "Enable advanced network funcionality". Try also set different options at AS in PDA.
kub11 said:
Maybe you have to set in settings > connections > USB to PC "Enable advanced network funcionality". Try also set different options at AS in PDA.
Click to expand...
Click to collapse
Currently it has got WM5 and I cannot find the options to disable "Enable advanced network funcionality" on PDA. Maybe I am missing something but I am sure thats a WM6 option as on my HTC Artemis running WM6 has got it but not the HTC Universal.
Damn! I have the same with my HTC Polaris. And I can't figure out what is the reason... :/ It has suddenly stop working... I have tried with "Enable advance USB... " I have winXP sp3.. ActiveSync 4.5 and WM6.1 by BePe. :/ Bluetooth is working like harm!
What to do?
no solution!
lb_lb said:
Damn! I have the same with my HTC Polaris. And I can't figure out what is the reason... :/ It has suddenly stop working... I have tried with "Enable advance USB... " I have winXP sp3.. ActiveSync 4.5 and WM6.1 by BePe. :/ Bluetooth is working like harm!
What to do?
Click to expand...
Click to collapse
To tell you the truth mate I never did find a solution. I ended up selling it on ebay.
2011 same problem
I have an HTC mytouch3g shapphire/magic and i have the usb not recognized error too. i called HTC and they told me to call microsoft for my vista. My device is recognized under linux. However under vista i got a problem. Software problem. any suggestions? I have installed Sync but again until the usb is recognized as an android device no luck... I have installed google usb drivers and htc sync but no luck. once in a while it did appear when i tried other drivers but it went away again....
sxristi said:
I have an HTC mytouch3g shapphire/magic and i have the usb not recognized error too. i called HTC and they told me to call microsoft for my vista. My device is recognized under linux. However under vista i got a problem. Software problem. any suggestions? I have installed Sync but again until the usb is recognized as an android device no luck... I have installed google usb drivers and htc sync but no luck. once in a while it did appear when i tried other drivers but it went away again....
Click to expand...
Click to collapse
if for a device with android os can use the HTC Sync 3.0.5511
This is HTC Universal section, other devices should look on it´s proper section to get a solution.

beating dead horse: cant USB sync w/ activesync

8525, sync w/ USB 5% of the time, no changes seem to change anything.
did the notification edit here on xda
uninstalled/reinstalled activesync
upgraded to 4.5
deleted partnership
uninstalled firewall
checkdisk
ran the resync program
installed office, .net 2.0, activesync 4.5 on entirely different computer
[edit: added for clarification]
tried unchecking the advanced connection box in start>settings>connections>usb to pc
[/edit]
when connecting to either computer, i get the "usb device seen" chime, but not the "i can do something with this device" jingle
get the "active sync cannot connect with this device" popup, run the diags and everything is okay. ms site politely informs me that the cause of my problem is that the device cannot connect to the pc.
anything i missed? i gave up on it 6mo ago when i got the phone bc i got bluetooth sync to work but now i want to flash to wm6
Thanks
start>settings>connections>usb to pc.
Untick the box. See if that helps?
Try this procedure step-by-step
1. make sure your phone is not connected to the computer in any way
a. Bluetooth off
b. WIFI off
c. USB cable not connected
2. Run spybot S&D (I always do this when the computer misbehaves - and make no mistake your computer is misbehaving)
3. Terminate all other running programs
4. Hook your phone to the usb cable and the usb cable to the computer. (don't worry if it syncs or not)
5. Open Device Manager and select Network Adapters
6. Uninstall the Windows Mobile Device
7. Disconnect the Phone
8. Open the Control Panel "Add/Remove Programs" and uninstall Active Sync
9. Reboot the computer
10. Connect to the internet and get a fresh copy of Activesync 4.5 and install it.
At this point if you can back up your PIM to the storage card or something it would be great because I suggest you do a hard reset of the phone. go to the settings page and select System. Tap the clear storage icon and follows the instructions to reet the phone.
11. Reset phone as above
12. When phone reboots, connect it to the computer via the usb cable.
Phone should sync from now on.
Good Luck
PS.
MrVanx is right, that could help but it will limit your phones capability. However if my method fails that may be your only option short of reflashing the phone with some other ROM.
I've tried MrVanx' solution also, just forgot it in the original post. It seems to sync more often when the box is ticked anyhow.
I don't have a problem with hard reseting or flashing. I'm going through this hassle for the sole reason of flashing to schaps 4.31
Ill try that when i get home tonight
Say I do a sprite backup before hard resetting the phone. After I do the hard reset, I restore the sprite backup. Will my lack of syncing problem come back? I assume it will.
After the hard reset and the initial sync on the "fresh WM5 install," I should proceed from there with the WM6 install, correct?
I have a TyTn II and experiencing a similar problem as sook..
I did all the steps except for these:
5. Open Device Manager and select Network Adapters
6. Uninstall the Windows Mobile Device
The thing is i cant find my mobile device anywhere in the device manager or in the network adapters subcategory. Any ideas?
mrvanx said:
start>settings>connections>usb to pc.
Untick the box. See if that helps?
Click to expand...
Click to collapse
+++ worked for me
sook said:
Say I do a sprite backup before hard resetting the phone. After I do the hard reset, I restore the sprite backup. Will my lack of syncing problem come back? I assume it will.
After the hard reset and the initial sync on the "fresh WM5 install," I should proceed from there with the WM6 install, correct?
Click to expand...
Click to collapse
Yes proceed. And no I don't think the failure to sync problem is related to the backups so that should be safe
SeqHTCTyTnII said:
I have a TyTn II and experiencing a similar problem as sook..
I did all the steps except for these:
5. Open Device Manager and select Network Adapters
6. Uninstall the Windows Mobile Device
The thing is i cant find my mobile device anywhere in the device manager or in the network adapters subcategory. Any ideas?
Click to expand...
Click to collapse
Not sure how a TyTN II looks to the device manager. try this instead:
open the device manager and click on the USB devices subcat.
Then connect your phone to the computer via the usb cable. pay attention and uninstall the usb device that appears when you hook up.
Then rescan. Reboot both the computer and the phone and see if that helps
sook said:
I've tried MrVanx' solution also, just forgot it in the original post. It seems to sync more often when the box is ticked anyhow.
I don't have a problem with hard reseting or flashing. I'm going through this hassle for the sole reason of flashing to schaps 4.31
Ill try that when i get home tonight
Click to expand...
Click to collapse
Before you try flashing make sure you have the Hard-SPL V7 bootloader installed.
You can flash without activesync tho.... activate the bootloader and connect your usb cable. If the tricolor screen indicates a usb connection then you can run the RUU wrapper, follow the usual steps and it should flash just fine.
You activate the bootloader by pressing and holding the "Power" and "OK" buttons and depressing the reset with your stylus (the OK button you use has to be the one next to the jog wheel)
I can't find my Hermes in device manager either. I'll try doing the flash through the bootloader i guess.
Did you try un-checking the "Enable Advanced Network Functionality" box as mentioned in Reply #1? That fixed it with mine. It would sync with my WinXP work PC, but not my WinXP Home pc, unchecking that box fixed it. Been fine ever since....
cyberscribe said:
You can flash without activesync tho.... activate the bootloader and connect your usb cable. If the tricolor screen indicates a usb connection then you can run the RUU wrapper, follow the usual steps and it should flash just fine.
Click to expand...
Click to collapse
do i have this correct?
1. enter bootloader
2. connect usb cable, check for confirmed connection
3. use ruuwrapper.exe to install hardspl http://www.mrvanx.org/cms/index.php...ask=view&id=52&Itemid=26&limit=1&limitstart=2
4. return to bootloader
5. connect usb cable, check for confirmed connection
6. use ROMupgrade.exe to install new radio http://www.mrvanx.org/cms/index.php...ask=view&id=52&Itemid=26&limit=1&limitstart=3
7. return to bootloader
8. connect usb cable, check for confirmed connection
9. use ROMupgrade.exe to install Schaps 4.31 http://www.mrvanx.org/cms/index.php...ask=view&id=52&Itemid=26&limit=1&limitstart=4
10. reboot ppc, delete partnership from pc activesync, cross fingers, sacrifice a goat, sync, install programs, bask?
JETninja said:
Did you try un-checking the "Enable Advanced Network Functionality" box as mentioned in Reply #1? That fixed it with mine. It would sync with my WinXP work PC, but not my WinXP Home pc, unchecking that box fixed it. Been fine ever since....
Click to expand...
Click to collapse
yup. tried it on the laptop that i use constantly with a legit copy of XP Pro. tried on BRAND NEW install of newest hacked version of XP Pro. neither were successful.
AT&T 8525 USN Syncing problem ...
I had the same problem too ... fortunately I had a simple fix.
I made sure that I only use the USB/mini-USB cable that came with my AT&T 8525. If I use a USB that came from a different device (like another phone or camera), it doesn't want to sync, except once in a blue moon.
The other USB cables may charge it, but won't sync it.
I've read elsewhere in this site that our 8525's can be picky with their pinouts on the USB, so this might be the issue. I hope it's something this simple for you!
Hope this helps!
it's a thought. ill dig through my drawer of cables and pull out all the usb/mini usb cables. no idea if I'm using the original or not.
however 6 mo ago when i gave up on the thing the first time i know it was the correct cable
sook said:
it's a thought. ill dig through my drawer of cables and pull out all the usb/mini usb cables. no idea if I'm using the original or not.
however 6 mo ago when i gave up on the thing the first time i know it was the correct cable
Click to expand...
Click to collapse
sometimes cables go flakey, but the cable we use is standard not proprietary so any A - miniusb cable should work.
Anyway the procedure you outlined above should have worked, am I to understand you still have the ATT ROM? If so talk to them about this problem.
If not access the bootloader again and hook up your usb cable. Does USB appear at the bottom of the screen?
Are you using the usb adapter that came with the phone? If not try to go back to that. The pinouts are the same as a miniusb but the form factor makes for a better fit and regular miniusb jacks can cause nonsyncs.
If you aren't getting "USB" at the bottom of the screen it is either a bad cable, a bad usb port (either at the comp or your phone), bad usb drivers, or just bad hardware in the phone. If any of these is the problem, all you can do is talk to AT&T hopefully before the warranty expires.
Sorry I wasn't more help mate.
The cable I've been using is the one that came with the phone. I tried the cable that came with my mp3 player and got the same results.
I do still have the out-of-the-box ATT Rom, however, the steps you outlined did not fix my problem. I did notice that my device appears as "HTC USB Sync" which I found strange. Is this normal?
USB does appear when I connect the phone in bootloader to the computer. I've tried two USB ports on two separate computers. Both computers are completely up to date with MS and drivers.
I suppose I'll go bother the people at ATT.
If I'm done with the ATT Rom, can I do all the flashing through the USB connection to the bootloader?
hey guys im having the same problem (TyTN II) it'll charge, but wont sync or show in device manager (i am using the original cable though)
i've tried to go into bootloader, but it doesnt say 'usb' at the bottom like it should, instead it says 'serial' i've tried diff usb ports, i've also unticked the advanced network box, softreseted, and hardreseted still no go...any ideas?? (im using alex's wm6.1 rom, could wm6.1 possibly have something to do with it?)
ActiveSync BOOSTER
Is there a way to boost up speed of Sync
Is there a any software or Cab file for it ?
Also want to know after we sync Phone
It keeps repeating to sync, is there a way to stop it ?
With removing the phone
Please Help

Problem with USB connections

Hi, I seem to be having some trouble trying to update to the latest 6.5 ROM. It says I have a "Error 260: USB Connection".
I also get the same error trying to flash to HardSPL, it says I should make sure it is synced, when it is. I also tried installing the "enablerapinew.cab", and another computer/another cable cord. All the same problems.
I think it may be because in my USB to PC menu, the option to "Enable Advanced Network Functionality" is ticked and grayed out. So I can't untick it.
I tried changing the driver in the registry to the USB Serial driver, but that didn't even sync.
If anyone can help, it would be greatly appreciated.
noctourne said:
Hi, I seem to be having some trouble trying to update to the latest 6.5 ROM. It says I have a "Error 260: USB Connection".
I also get the same error trying to flash to HardSPL, it says I should make sure it is synced, when it is. I also tried installing the "enablerapinew.cab", and another computer/another cable cord. All the same problems.
I think it may be because in my USB to PC menu, the option to "Enable Advanced Network Functionality" is ticked and grayed out. So I can't untick it.
I tried changing the driver in the registry to the USB Serial driver, but that didn't even sync.
If anyone can help, it would be greatly appreciated.
Click to expand...
Click to collapse
Since this is your first post;
Check here.
Tonnes of info on this error.
The alternative is to flash from SD card. Instructions in flashing guide on Wiki.
I'm having the same issue... mine started after i installed a cab file that allows all of myTouchflo screens to have the same wallpaper.... but now my usb connection on th phone does not work. Even in bootloader when i plug in the USB it never recognizes it and i've tried multiple cables and multiple workstations any help here would be great!
Robbienismo said:
I'm having the same issue... mine started after i installed a cab file that allows all of myTouchflo screens to have the same wallpaper.... but now my usb connection on th phone does not work. Even in bootloader when i plug in the USB it never recognizes it and i've tried multiple cables and multiple workstations any help here would be great!
Click to expand...
Click to collapse
Hard reset if nothing else works.
Then you will know whether it is a hardware failure or software related.
I've seen anything from bent pins, lose USB on circuit board, bad cables, Vista vs XP....etc and the list goes on of possible causes for this issue.
Well it still charges and the phone still reads the storage card because i was able to flash it from the card but the computer will not recognize it as a USB device therefore activesync will not work and i cannot access the storage card when its in the phone
Reinstall ActiveSync...maybe...
Regards
Hi!
I have exactly the same problem.
Connecting the TD2 with my PC does not do anything.
Its the same issue with my 2nd PC and othe cables.
Charging works but no USB connection.
I think the USB connector on the Phone is broken.
I allready contacted HTC support but no response yet.
I will post again when ive got some news.
br
wonko
SD-Rom flashing
Hi ya all,
Try to flash it from your SD card, have a look here: http://www.tomlenferink.nl/component/content/article/1-latest-news/77-windows-mobile-65.html
Don't forget for Windows XP you need Active Sync and for Windows Vista and 7 you need Windows Mobile Device Center.

HTC HD2 Drivers won't install Win 7 x64

Anyway to manually get the drivers for it? I can't find them and I can't sync my device to my computer. Windows Mobile Device Center won't work at all, it doesn't recognize my HD2 and it says the driver installation fails.
Can someone help me out please? Thanks
Windows Mobile Device Centre was all I never needed on my win7 x64. I installed the program before inserting the HD2 though. Obviously make sure you have the program up and running before plugging in the HD2 and selecting activesync on it; It should load up. You could uninstall the driver (from device manager) and start again if all else fails.
What if it does not?
Started doing that "cant recognize" issue while installing NAND (at the radio installation process -r: 2.15., compatible)
Figured to go to stock WinMo with SDCard, but it still cant..
Faster data sync disabled, after that it tried to install the drivers again, but says it fails...
Gotta go to ms and install the updated win mob dev c. The one that ships needs updating.
Also, once you are into the android side of things you should open wmdc, connection settings, and turn off allow usb connections, and install the android usb drivers.
Thanks mate, but done everything, I mean everything. Now I'm totally stock, original SPL and original WWE ROM, everythings working like a charm, besides connecting to a PC. Also tried with another computer (XP) and another cable. I can say I've done everything I found on the net, but nothing helps. Uninstalling driver, uninstalling HTC Sync etc etc etc... It just cant recognize the USB..
thekillingroad said:
Thanks mate, but done everything, I mean everything. Now I'm totally stock, original SPL and original WWE ROM, everythings working like a charm, besides connecting to a PC. Also tried with another computer (XP) and another cable. I can say I've done everything I found on the net, but nothing helps. Uninstalling driver, uninstalling HTC Sync etc etc etc... It just cant recognize the USB..
Click to expand...
Click to collapse
Replace your USB Cable and Thats ALL !
i had the same problem....i am for now using windowx xp
aks777 said:
i had the same problem....i am for now using windowx xp
Click to expand...
Click to collapse
I have been using it win 7 64 bit since the beginning. and I never have a problem with the driver.
Try redownload and reinstall Windows Mobile Device Center from Microsoft website.
Only connect your device after the driver has been properly installed.
in device manager delete usb controller after software installation.
Thanks to ALL, but changing the USB cable, so sure that's ALL? =)
I'm not gonna mention that I've written that I've tried it with many computers and many cables. =)
The phone is sent to HTC and they told me that they ordered a new mainboard.
Hope doesn't take too much time. My Service Provider gave me a Galaxy 7500.. Cupcake, no market.. arrrgh!
Thinking of buying an iPhone and selling it after two weeks but that's gonna cost me $200 loss in two weeks. too much =)
As doing some thinking.. the device cannot "introduce" itself to the computer. I couldn't find a more sense making answer.
If you've tried hard-resetting, cable and PC changing, if it's still not working, then there should be a problem about the phone, mostly about the mainboard.
I suggest anyone having that problem go make your phone check at a service, of course if you have warranty. =)

Nexus 4 won't connect to PC.

Hello, i have a very weird problem. My nexus 4 cant connect to pc as mass storage device.. It worked fine like 4 days ago.. I dont know what happened or what else i can try.. Already tried: usb debugging on/off, factory reset, usb settings in storage menu, different usb port, NOTHING HELPED! There are another weird thing that i spoted is that it only charges through usb when i have nothing selected in storage>usb connections menu, as soon as i try to select mtp or camera it stops from charging and nothing happens. Same problem for AC charging it wont charge when theres mtp or camera selected, and only charges as USB... I'm confused.. Are there any ways to get it working again?
I'm having the same problem.. I've just installed Windows 7 64 bit but it sees my Nexus 4 like Unknown Device.. I uninstalling the drivers and re installing them using Nexus Root Toolkit but no result for now..:crying:
Do you have a ROM or anything installed? I know with PA its a problem at the moment at times. A little more info would be nice. I never had a problem with Windows 7. I'm on Windows 8 now and i had an issue at first with it not showing up at times. But it seems to be fine now.
Just go in
Settings,
Dev options (if you not have it go in phone informations and press many times in row the Build Number, this activate Dev options)
and Disable USB Debugging,
then reconnect your phone, and the computer will see it
USB debbuging isnt working. i have no ROMS, stock android 4.3. And yes, now im running WIN 8, previuosly had 7, the problem occured after installing 8 and trying to plug it in. Its not showing in my computer neither in device Manager. I doesnt make any difference with, or without it pluged in, the only difference is that it will start charging, but then again ONLY when i disable everyting in storage>usb connections.
bump
do you have a fast charge app installed? it sounds like it's an issue related to fast charging via USB. if it's enabled you can't access anything on the phone via usb, but i think that requires to at least be rooted.
I'm on last PA 3.99-Rc1 and I just found out that if I go in Setting-Memory the appilcation shutdown .-. Never had this issue before .-.
Matteo Mazzu said:
I'm on last PA 3.99-Rc1 and I just found out that if I go in Setting-Memory the appilcation shutdown .-. Never had this issue before .-.
Click to expand...
Click to collapse
Nothing, just read that it's a issue with PA while using last Franco Kernel nightly XD I'm going back to windows vista 32bit, so I believe the problem connecting my nexus 4 won't be any more an issue (Going back to Vista because for daily use it worked perfectly and every thing worked fine with the drivers, Windows 7 it's better, but too many issues with drivers bla bla bla XD) :laugh:
I have always used the Windows Driver from the Google SDK (Google USB Driver- As of today, Revision 8) for my Windows 7 64 bit computer and have never had a problem. More importantly there is an Update Manager that comes with the SDK, that when you run, notifies you of newer Windows drivers as they are released. That way as Google issues newer OS builds or Windows issues a new OS, I know that not only my driver but my platform tools aka fastboot/adb/etc. (As of today, Revision 18.0.1) will always be compatible. The problem with these toolkits and driver downloads all over the place on these forums is that you have know idea how old the internals are. The other obvious thing to check is a bad or intermittently bad USB cable. Also make sure "MTP" is checked in Settings > Storage >Settings > USB computer connection.
Hey, I'm sorry if it's against etiquette digging up an old post, but this part worked for me:
pjc123 said:
Also make sure "MTP" is checked in Settings > Storage >Settings > USB computer connection.
Click to expand...
Click to collapse
Thank you so much, I had this problem for a long time before I found this thread.
dunni88 said:
Hey, I'm sorry if it's against etiquette digging up an old post, but this part worked for me:
Thank you so much, I had this problem for a long time before I found this thread.
Click to expand...
Click to collapse
Glad I could help. That setting isn't exactly the easiest thing to find.
Fix usb
Go to device manager in windows 7/8/8.1 . Connect your mobile with usb. You will see android device or adb right click on it, select properties, click uninstall driver. NOTE: When you click this a small popup will appear saying remove software driver, tick on it and click uninstall.. there you go ..it will reinstall drivers and your phone will be finally connected.
im having the same problem . My phone shows as Unknown Device on Device Manager. Tried other cables and usb ports. I can tell that the cables and ports are not the problem since my Nexus 7 can connect without problem. Tried usb debuggin on/off, MTP on/off, PTP. Still no luck. Already tried to reinstall drivers but still the same problem. Hoping this is not a hardware issue. I already tried factory reset and flashing other ROMs

Categories

Resources