Hello.
I've updated my JAMin today with the gullum Prophet Touch VII and after installing, when in align screen i've pressed all the 5 points on the screen requested and it just return again to the align screen. Dont know if its the rom or the screen or else. Is there any other way to pass this screen without having to touch the 5 points?
Related
I own a Dopod 900 for a year and the warranty has expired.
Some days ago, the screen is malfunctioning..
I have aligned more than 10 times on that day.
Since then, i have to align the screen a few times a day.
Does anyone have clues on how to solve that? (if need repairment, how much will it cost in $USD?)
If so, remove it and test the response from the Touch Screen.
Screen protectors can interfere with the sensitivity and accuracy of the Touch Screen.
Attempt to re-align the screen by going to Start>Settings>System Tab>Screen and then tap on Align Screen or press and hold the Center Navigation key and then press the Internet Explorer Button. Note: To ensure accuracy, Screen Alignment must be completed using the device Stylus and no other object
with this I solved my problem with qtek 9000
hi, i have one qteck 2020i, in the screen apears align screen, i follow the steps to calibrate and the screen stay white two seconds and turns to align screen.I upgrade rom but is the same problem. what i can do to solve this problem?
thanks
pitzone said:
hi, i have one qteck 2020i, in the screen apears align screen, i follow the steps to calibrate and the screen stay white two seconds and turns to align screen.I upgrade rom but is the same problem. what i can do to solve this problem?
thanks
Click to expand...
Click to collapse
Hold the power button down and put the pen in the bottom hole and do a hard reset then run through the seting also before you do this clean the screen as dust can build up and can cause problems in the screen align section please note also by doing a hard rest you will lose programes saved and will start from a fresh windows instal all the best THIS SHOULD SOLVE YOUR PROBLEM
Hi there,
i have problem with screen alignment after I dismanteled my trinity and cleaned it because it was all dusty.
After putting everything together my screen was not aligned. I tried to align but it just kept asking me to align forever.
I did dismateled it again and put together, flashed rom again but it is the same...
Anybody having any idea ? please...
New digitizer ...
it seams that only solution is new digitizer..
so I ma waiting for it, hope it comes fast...
Hello,
I broke my screen (only digitizer) and bought an replacement. After replacement i could not align my screen. When i touch the first cross, nothing happens. i had to soft reset the phone to bypass the alignment. The screen 'works' that means that it responds to touch, only is misaligned.
What is your experience with the new digitizer?
Arjan
Fixed the alignment problem. FtouchFlo was interfering with the screen alignment. After stopping FtouchFlo i could align it just fine. Screen is working with the new digitiser
Hi everyone! im new to the forum So Ello everyone))) I,v had my wizard fr a month now and it was fine untill screen alignment become bad so i press on button and button next to it opened. Because of this i have clicked on Screen Align to align the screen but it started to loop (( dont know why because touch screen it self works perfectly. So what i supposed to do to align my screen? im using my phone by keyboard now because i just cant press any button on screen because it needs alignment. THX to anyone who has read this.
The wizard doesn't like being kept in a pants pocket. If you press with your finger firmly, running it all around the edge of the screen, that might cure the temporary insanity. Otherwise, set it aside (not in your pocket) for several minutes and try again. I got a leather belt case for mine to cure this issue.
If I'm guessing right, the first problem was that the touchscreen seemed to be very weird, so you tried to re-align it, and it always fails.
noup the problem was that i have bought the phone about 3 weeks ago it was working but when i tried screen alignment it just started to loop. I pressed it about 50 times(them 5 crosses) i dont know what to do (( because screen alignment now is crap (to exit screen alignment i need to get off battery and put it back)
Hi buddies i'm having htc touch 3g today my touch screen was not responding properly,so i did hard reset.after the initial settings were loaded it landed on align screen window,as per the instruction i tapped the pointer and its moving well,but i have been moving the pointer for almost 1 hour but no use still its asking me to tap the pointer.I'm stuck in the align screen window.Please help.
HI, what ROM do you have?
There's one in this forum (PhamQuang) with that problem...