hi, i have one qteck 2020i, in the screen apears align screen, i follow the steps to calibrate and the screen stay white two seconds and turns to align screen.I upgrade rom but is the same problem. what i can do to solve this problem?
thanks
pitzone said:
hi, i have one qteck 2020i, in the screen apears align screen, i follow the steps to calibrate and the screen stay white two seconds and turns to align screen.I upgrade rom but is the same problem. what i can do to solve this problem?
thanks
Click to expand...
Click to collapse
Hold the power button down and put the pen in the bottom hole and do a hard reset then run through the seting also before you do this clean the screen as dust can build up and can cause problems in the screen align section please note also by doing a hard rest you will lose programes saved and will start from a fresh windows instal all the best THIS SHOULD SOLVE YOUR PROBLEM
Related
HI Guys
Recently I found that after extensive using the screen with stylus, screen alignment goes for a toss, When trying to do the screen alignemen again, after tapping centre and the for corners, alignemnt doens;'t happen and again the same screen appears....
Infact my screen is not at all damaged..
Does any one have idea if this is a bug in ROM or some other issue which is addressed ?
Currently my ROM is 1.13WWE and Radio 1.12 (PM10A)
hi all
my k-jam stoped for work
when I turn on or restart ,it appear me white screen next the screen turn off
but the windows it is work >>>> I can hear the sound from K-jam but screen is still off
I try enter to hardware screen but it appear me white screen next turn off
I check the screen and wire from screen and board all thing it work
(the problem not in screen and wire)
can any body help me :
sorry for my language
Force it get into bootloaders (multicolor screen),if it gets there,flash with official rom. Or it might be the LED screen giving up on you.
Cheers!
zabardast_1 said:
Force it get into bootloaders (multicolor screen),if it gets there,flash with official rom. Or it might be the LED screen giving up on you.
Cheers!
Click to expand...
Click to collapse
I try enter to hardware screen but it appear me white screen next turn off (same problem) thenk you
Hi to u all
i have a major problem with the screen alignment
there was a small damage on the foil thats on the screen of the tytn
Now i have flasht a new rom image and got stuck on the screen alignment
i can press the small X and it will move and starts over and over again
is there a way to bypass the screen alignment
Hope there is someone who has a solution
You need a cab install called remote screen alignment. You also need another Hermes to get the alignment settings off.
''remote Screen Alignment gets the alignment settings and stores it on your pc. If for some reason you require them to be re-entered but can't do so manually it can fix this. It was originally intended for people with poor eyesight or other problems who had trouble hitting all 5 points on the calibration. Its a freeware cab.
Hope this helps...
My dear fellow owners of a Blue Angel ppc. I've recently updated my Blue angel to wm6.1 by xplode and was having a weird problem. My screen was de calibrating at a very steady pace (around 1mm per day) and every time I tried to align my screen the touch screen simply friezed. I had to shut the device down and turn it on again in order to leave the align screen and the touch screen was functional again.
I tough it was a problem of the rom and posted my trouble in the topic of the rom. But since I'm not the kind of person that stays put waiting for other to solve my problem I went on a search trough the forum and found out that several other members of the forum where experiencing the same problem (on other devices) and the common thing on all of them was the installation of the cube/touch flo.
I started wondering if that was my problem to. So I uninstalled cube and the touch screen stopped responding. So I soft reset the device and the touch screen was working again (I just got a error message that the touch flo couldn't be started) and I was able to successful align my screen.
In resume:
Issue: The touch screen stops responding uppon entering the "Align Screen" screen.
Important considerations: do you have touch flo or cube installed?
Solution: If yes to question above, then remove the touch flo and/or cube from your device and the problem should be solved.
thank you for reading and I hope I was useful.
Be well!
I have the same problem, but my BA did not install any touch flo nor cube!
Cound it be any other reason?
Thanks.
Could you please describe your problem in more detail? What's your rom, why can't you align screen, etc.
Use a thin card!!!
I been using this once when I had the same problem. Use a thin card and swipe it between the keyboard and the main phone. Do it on top and bottom. During the time you do it yo will hear something like a clip sound. I think thats the screen calibrator, i don't know. but it works
Not bad if you try it.
ebautista said:
I been using this once when I had the same problem. Use a thin card and swipe it between the keyboard and the main phone. Do it on top and bottom. During the time you do it yo will hear something like a clip sound. I think thats the screen calibrator, i don't know. but it works
Not bad if you try it.
Click to expand...
Click to collapse
????????????????????
You must be kidding?!
No I'm not
marko_serb said:
????????????????????
You must be kidding?!
Click to expand...
Click to collapse
No I'm not kidding. Me and My Brother-in-law did that. We have the same device. I did it first after finding somewhere in modaco. He told me that it worked.
Hi everyone! im new to the forum So Ello everyone))) I,v had my wizard fr a month now and it was fine untill screen alignment become bad so i press on button and button next to it opened. Because of this i have clicked on Screen Align to align the screen but it started to loop (( dont know why because touch screen it self works perfectly. So what i supposed to do to align my screen? im using my phone by keyboard now because i just cant press any button on screen because it needs alignment. THX to anyone who has read this.
The wizard doesn't like being kept in a pants pocket. If you press with your finger firmly, running it all around the edge of the screen, that might cure the temporary insanity. Otherwise, set it aside (not in your pocket) for several minutes and try again. I got a leather belt case for mine to cure this issue.
If I'm guessing right, the first problem was that the touchscreen seemed to be very weird, so you tried to re-align it, and it always fails.
noup the problem was that i have bought the phone about 3 weeks ago it was working but when i tried screen alignment it just started to loop. I pressed it about 50 times(them 5 crosses) i dont know what to do (( because screen alignment now is crap (to exit screen alignment i need to get off battery and put it back)