Related
Hi i have problem some times caller id show just number when someone call me sometimes(same number) show name from contacts how to fixit
Same thing here...
Sometimes it works, sometimes it does not... Actually it has only worked a couple of times...
At first I thought I was closing the ID Contact Monitor when I used an application close button (Battery Back from Omega One). But then I noticed that it still does not work even without the app closer.
Any clues?
I believe that this is probably down to the 32 process limitation of WM2003 on the XDAII 28 processes open automatically as you open programs the XDAII will close what it thinks isn't needed any more.
Can anyone confirm? :?
Hmmm... It could very well be that... :roll:
If you don't use the "permanent save" feature, then you can delete the 4 flashman files out of the \windows\startup folder.
this gives 4 more process slots. Making the number of running processes at startup more in line with a normal XDA.
wasting 4 process slots on 4 different programs that do the same thing to 4 different databases is rediculous. Having them running even when the feature is turned off is also rediculous.
..Chuck..
Yes, thanks... I deleted the task I don't use and now IACaller is working fine ever since...
Thanks!
I've upgraded to the new ROM, and only the lesser 19 processes now, meant to alleviate this problem.
In addition, it's a newer fix of Caller ID.
And even more, I removed the FOUR flashman/mem processes from startup too.
And even then, I find after just half a day of running apps and stuff, Caller ID no longer shows a photo, and requires a reboot to work properly.
Not happy at all, not in the slightest. Not in the least bit impressed, because i see little else that can be done to fix this, so no likliehood of a solution.
VERY poor to say the least.
Shadamehr,
Are you using an application closer like Pocket Plus or Wisbar?
If not, I suggest you use one. Remember that whithout an app closer you are consuming valuable resources and the X only minimizes them.
Best regards,
Rayan
I was using SideBarX.
What I find however, is that this is the WORSE thing to use, as it closes ALL apps, so if the Caller ID HAD happened to just recently update itself, it would close that too, so in effect, closing the very thing with any potential to fix things.
Alas, I find the only thing that works, is to do a soft reset twice or three times a day.
Not a great loss given how quick re-boot time is, but a bit of a stupid solution nonetheless.
Additionally, I find another slight issue, in that if I get an SMS, when I click the notification envelope on the top bar to open it (if I had left it, not catching it straight away, so the first pop up of it had already gone) then the 'speech bubble' that appears with the message in, is REALLY slow now after the new ROM update, taking a second or two to draw itself properly. I can see the outline of the bubble for a fair while before the bubble 'draws' on screen properly.
Sadly however, it even does this after a soft reset to speed things up, so I am very concerned about this aspect of things.
It worked a lot faster before the update.
The rest of the update has been a good thing for me, but I am a bit angry about the Caller ID problem still being here at least for me, but more worryingly, I am concerned at the apparent speed slow down for some things! Especially as I have read tales of others experiencing this too.
But overall, its nothing earth-shattering I guess.
Shadamehr,
As far as the CallerID problem, at first I was having the same problems but I managed to fix this by removing unwanted items on the startup folder (remember the 32 process limit?) and by using Pocket Plus, since it allows you to exclude CallerID from closing.
I also use ScaryBear Software's Check Notifications to remove duplicate events on my system's databases.
Good luck!
Rayan
Pocket Plus? Cheers mate - I'll go search now.
Here's hoping it works.
Also, the new ROM is only meant to have 19 things running. I have further removed the four flashman files from startup.
Do you know of anything else I can remove?
Cheers mate.
Can't find Pocket Plus mate (at least not as a free app).
Any link for me please?
I don't remember what things where in the Startup folder but this is the stuff I have now:
CheckAutoRun.lnk <--- No idea what this is for
ChgDfLnk.lnk <--- No idea what this is for
ClearTemp.lnk <--- I installed this
IA_Caller_ID.lnk
MMReg.lnk <--- No idea what this is for
Pocket Plus.lnk
Poutlook.lnk
Stk.lnk
VoiceCommand.lnk <--- Microsoft's Voice Command
Cheers and good luck!
Rayan
You can find it here http://www.handango.com/SearchRedirect.jsp?siteId=1&jid=2BD54724B6D87D58BA6CB6BA8BB79B81
Cheers!
Hi all,
I've the problem with with my XDA II and IA Caller ID. It works for one or two hours and then impossible to see a picture. The only thing to do is a soft reset.
I've checked the processes and I'm now with 16 processes (using PHM Task Manager to see the processes) and when the problem occurs, the IA_Caller_ID process is still active.
For information, I use WisBar advance to really close my programs and I kill ActiveSync every time I leave the XDA from the cradle.
Thanks for your help...
hello,
Do you put pictures in your SD Card ?
If yes, try with pictures in your phone memory.
I have the same problem with ringtone in my old Qtek (first generation SPV by Orange)
Sometimes, the sdcard is poweroff to preserve battery life...
test and come back ;-)
THe picture is in "/my documents" none on the SD card
Now it's new, sometimes the XDAII doesn't ring at all. The screen lights on but no ring and no information. :shock:
G'day all
I recently got myself a lovely HTC wizard (branded O2 XDA Mini S, ). It's a device I've been researching for a while so I was very much excited to try out my first WM product when it arrived this morning.
However, for all it's beautiful design, it's really been a bit of a big pain on several ways. Most significantly and immediately noticable is the very sluggish interface. Some things, like notifications, I can dismiss fine, but the majority of actions, such as starting a program, opening one of the left-hand buttons or switching to landscape mode, take several (maybe 10) seconds to happen and even then the screen will only be partially and very slowly redrawn. This seems to only occur at the 'today' screen (other programs are pleasantly snappy). Anyway, it's rendering the today screen pretty useless and since it's the starting screen it means everything is taking much longer to do. Is this just my device or is this a recurring issue?
Cheers
Have you reinstalled without the o2 Active stuff (basic mode option I think). It the real hog.
Other than tat have a look around the messages is the forum for various registry hacks to speed this baby up.
It does work well, you just have to tweak the heck out of it.
So it's a matter of going around deleting stuff that 02 put on?
Basic install plus something like SPB or Magic button to close apps properly (apart from the ones you regularly use, such as phone/messaging/IE) makes the device at least twice as quick.
wilesd said:
Basic install plus something like SPB or Magic button to close apps properly (apart from the ones you regularly use, such as phone/messaging/IE) makes the device at least twice as quick.
Click to expand...
Click to collapse
This is exactly what I've done on my mini S...O2 Active is really doggy, the interface looks fine, but mini S can't affort....
Basic intall with SPD Plus work fine for me....I can now play mp3 & mp4 files smoothly with beta player, connect BT GPS receiver with TT5...
To really clear all the clutter, perform a hard reset and when you get to the 'about to customise' step (short countdown) perform a soft reset.
This results in a completely clean OS thats much more responsive. SPB pocket plus is a good app to install next.
There are other registry tweaks such as disabling menu animation that make an additional improvement to the responsiveness
There are plenty of discussions about this in the other threads - have a search around.
Dunno if this works on the Wizard but on the magician, if you map one of your buttons to the "Start" menu, then you can do a lot of program switching without going via today page - and the whole re-draw of it.
Particlulrly if you chose wisely the 5 programs that you can specify for the start menu.
jacro said:
To really clear all the clutter, perform a hard reset and when you get to the 'about to customise' step (short countdown) perform a soft reset.
This results in a completely clean OS thats much more responsive. SPB pocket plus is a good app to install next.
There are other registry tweaks such as disabling menu animation that make an additional improvement to the responsiveness
There are plenty of discussions about this in the other threads - have a search around.
Click to expand...
Click to collapse
The soft reset method is OK if you don't use MMS as the MMS app will not be installed, if you want to use MMS though the Basic install is better
I cleaned my mini-s the hard way
Hard reset, soft reset, then installed some of the extROM cab files manually and setup the GPRS manually too. Wizard now runs ok, its not fantasticly fast, TTN5 still takes time to load, and incoming calls while it loads cause problems (but thats only 15 secs!). Magic button is great, pick the apps you need to keep open (phone, text messages, etc) and "keep alive" and "hide when inactive" then just use close all to keep the RAM free.
Alright - I'll try one of these hard/soft reset cleans. But...
Another problem I've been having is that ActiveSync refuses to detect my device over USB. The USB connection seems fine (Windows XP detects new but unkown hardware - seems to lack an RNDIS driver or something), but a sync I can't make work.
So I can't install anything again. After a hard reset will applications such as phone and messaging be restored or will the require a reinstall (that I can't do)?
Also, remapping the buttons sounds like a brilliant idea. I'm not so big on IE so if I made that my start menu toggle I could reach a whole load of things one-handed. One thing that oft annoys me is when you have to close a program or dialogue box with the cross in the top-right. Can that be remapped to, say, the voice recorder button so I don't have to keep awkwardly touching the screen?
That Magic Button sounds handy also - freeware by any chance? I'll google it in a sec. It's annoying (well, peculiar, coming from a PalmOS background) to have several applications running at once - all that's needed is the phone/messager apps and perhaps the music player.
Thanks for all yer replies!
Hey all has anybody else experienced this? when I open up outlook to check emails or text messages outlook's background doesn't load up, I can see on the top bar the name of the inbox I'm currently supposed to be looking at but the background is my today screen. I can send new messages but basically I can't read new ones if I try to touch the screen I activate whatever I hit on my today screen. I took off all my today screen plugins, but nothing, if anyone has any suggestions or ideas, I would appreciate it.
Sounds obvious and stupid but have you turned the device (hold power button) and back on again? This happens to me sometimes and after a reboot it seems to fix it.
Yeah I do the same thing, the only problem is that it's doing it too often and it's a pain to reset my phone 3 - 4 times a day.
Oh i see. Mine has never done it that often, sorry I can't help any more!
You have a software conflict somewhere - it will be v hard to track down. You could try uninstalling some especially if you have spb products installed as they often are the culprits. But you probably need to hard reset and add programs one by one to find the one.
I had this problem in the past (with old ROMs though)
The way I managed to overcome this is to keep outlook running in the background.
I'm using the Spb Pocket Plus and in the "close button configuration" I added the outlook to the exceptions list. By keeping it running, it always come back with a complete screen (not just top and bottom).
But then again, I didn't see this behavior since I upgraded the ROM; I'm on the 2.26 ROM now.
@gilbnx
Yeah was just thinking of doing something like that more or less.
@meschle
The only spb software I have is spb backup, I always works at first it's just at some point after I've been using the system for a while that it starts doing it. It could be after opening some application and I just haven't noticed. I'll try opening one application at a time and checking to see if it stops working after a certain one, yes tedious I know, but tell you the truth I don't use a whole lotta applications, so I'll stick to the ones I usually open up.
For those of you having this problem, if you are using smartkey, make sure outlook, MMS, Text messaging, are set to be ignored, just like it is in the default smartkey.ini. I had altered the ini and taken out all the programs since I wanted them all to close, but I noticed it started happening after closing outlook with smartkey, so I put it back on ignore and haven't had any problems since (and I hope I won't).
Every time I hit the space bar now, or a symbol key, whether it be in an e-mail, browser, text; whether it is the virtual keyboard or actual, my phone will all of a sudden just quit out of whatever app. it is in. Anybody know what the heck this is?!
hey man i've got the same problem!
did yours got fixed?
and how?
Same here. You guys running WM6.5?
i think its from some registry entries not agreeing...
i've seen similar closing of programs with random button presses
try and narrow in on the scenario with your latest additions to the device...
i would be surprised if this is happening on stock rom
i would suggest all posting up your current rom/carrier...etc
thats how it will get narrowed in on
personally i installed a new rom and it went away
i tried using a backup program and it didn't solve it...problem was saved in there
so all my settings had to be entered manually again
it may have been my backup program at the time (spb clone) which sucks in my opinion
using sprite backup now and seems to be effective (two successful backups logged)
but i didn't use sprite at the time of this issue
try one of the newer roms available
Hi.
When using my Diamond I noticed some processes don't disappear when they should. They fill up memory. Either you kill 'em with some Task Manager, or you soft reset.
Don't wanna SR or kill processes manually? Let my thing do it for you!
NoTSR is a very very simple program which kills some predefined processes, based on my experience with Diamond.
Source code (eVC++ 4) is for you to use and modify whatever you want. However, it would be nice if you gave me some credit if using it!
Have fun!
p. s. Sorry for the icon.
If anyone is wondering, this is what it kills off (copied straight from the source code):
"Opera9.exe", // everything still loads well
"OperaPreL.exe", // after killing them
"pword.exe", // for some reason Pocket Word leaves its process even after leaving
"CommManager.exe", // other Office apps seem to be fixed
"AudioManager_eng.exe", // last ones are opened by manila for quicker loading of tabs.
"AlbumSearcher.exe" // killing AudioManager stops music and rewinds current track.
I keep getting a "Can't list processes" dialog box when I launch the app. I tried placing the NoTSR.exe within in the extracted NoTSR subdirectory and also outside the subdirectory.
JNGold said:
I keep getting a "Can't list processes" dialog box when I launch the app. I tried placing the NoTSR.exe within in the extracted NoTSR subdirectory and also outside the subdirectory.
Click to expand...
Click to collapse
I can confirm that.
What did we wrong? Do we have to place it in a special folder, like windows?
It worked for me, but my phone was very sluggish after running the app and I had to soft reset to bring it back to par.
Thanks for starting this development, there is definitely a gap to be filled by it, I use oxios hibernate and a task manager to finish off opera .exe, this is much easier to use and your icons not so bad either!
uniqueboy said:
It worked for me, but my phone was very sluggish after running the app and I had to soft reset to bring it back to par.
Thanks for starting this development, there is definitely a gap to be filled by it, I use oxios hibernate and a task manager to finish off opera .exe, this is much easier to use and your icons not so bad either!
Click to expand...
Click to collapse
Thanks for positive feedback. I wonder why th sluggish reaction. Loading of opera as well as some TF3D tabs will for sure be slower, but whole phone is weird. After all, it just kills and leaves (see src if unsure). I use NoTSR myself and I got no problems at all. Maybe you could test it again and if it slows down show the list of processes?
@others: try using the app with rest closed. It should work in any folder; I keep it in my docs and launch via Start.
Thanks again for interest!
same error message for me. sprint touch pro with jd6.1 rom
I can't reproduce that error to analyze and fix it, so I post new version which tells you what went wrong. Try with it.
trying now
kosherpig said:
Thanks for positive feedback. I wonder why th sluggish reaction. Loading of opera as well as some TF3D tabs will for sure be slower, but whole phone is weird. After all, it just kills and leaves (see src if unsure). I use NoTSR myself and I got no problems at all. Maybe you could test it again and if it slows down show the list of processes?
@others: try using the app with rest closed. It should work in any folder; I keep it in my docs and launch via Start.
Thanks again for interest!
Click to expand...
Click to collapse
OK, so I've been using the NoTSR app for a couple of days and I can't reproduce the lag that I had when I first ran it, odd. I think it may be something to do with the fact that when I first ran it it was from within file explorer, after using it I could not get explorer to open up again properly. Now I have put a shortcut in my windows/start up/programs folder and I am running it from my start menu everything seems just fine and is all working as it should with no sluggish side effect, so thanks again kosherpig for the very useful app.
SKTools Lite (free) comes with a small program called "Free up ram." During SKTools Lite install, it will tell you something about your windows version, just click through that and let it install.
Once it's installed, go to your programs page and you'll see it there: "Free Up RAM". Just run it once. It will look like nothing is opening, but its because it's working in the background. You'll get a message box very shortly telling you how much ram (in KB) you freed up.
http://s-k-tools.com/index.html?sktools/m_lite.html
I use it all the time. Brings me from 45 -50 down to 35-40. Lowest I've seen was 32%.
Our programs are slightly different. My one doesn't free RAM by itself; it closes processes which won't close by a "close all" command. And NoTSR is not resident (after all its name is No Terminate-Stay-Resident ). Its goal is to be as small as possible, also in term of occupied disk space (~9kB now). Maybe this SKTools and NoTSR could be used in conjunction to free up even more RAM?
And, I also got the error message 2 times.
1st when I was running FM radio.
2nd when I was at the Music tab.
I solved them:
1st by closing FM radio and invoking NoTSR. Everything went OK.
2nd switched to the Home tab. NoTSR failed again. Waited some seconds, ran again. OK now.
Solution: fails? Shut everything using the HTC task manager, go to today/home screen, and invoke NoTSR after some time. I can say the behavior is really weird, since my code doesn't depend on running apps.
However, I run NoTSR everytime after using Opera. I got that error 2 times in my whole usage.
Anyways. Thanks for all responses
I find "Oxios Hibernate" frees up more ram than sk tools "free up ram" does, it is also free, but must be run manually, a useful addition to any start menu.
I'm getting about 10 mb back with NoTSR after opera browsing, "free up ram" or "hibernate" practically nothing back after opera browsing. Basically if you use opera then this is a "must have".
A small update.
If you know when Oxios Hibernate works and NoTSR fails, check this exe out. I tried to contain the Hibernate in it.
This version is bugged.
Please use version from 1st post.
If you ran this version already perform a soft reset.
Sorry for inconvinience.
chronster said:
SKTools Lite (free) comes with a small program called "Free up ram." During SKTools Lite install, it will tell you something about your windows version, just click through that and let it install.
Once it's installed, go to your programs page and you'll see it there: "Free Up RAM". Just run it once. It will look like nothing is opening, but its because it's working in the background. You'll get a message box very shortly telling you how much ram (in KB) you freed up.
http://s-k-tools.com/index.html?sktools/m_lite.html
I use it all the time. Brings me from 45 -50 down to 35-40. Lowest I've seen was 32%.
Click to expand...
Click to collapse
it lowers your memory usage by 10%???
To me it goes from 63% to 61%...
On my Diamond
thats frustrating...
Hi there, trying to use this app I'm getting the same error as others...
"Can't list processes: The parameter is incorrect. (#0)"
Task Manager is empty, I've tried leaving it on the home screen for 20 secs and running it but still the same problem.
Any ideas? I'd really like to get this working as Dutty 3.1 does appear to suffer from this memory problem.
EDIT.... OK, did a reset and it's working fine. I'll play with it over the next day or so, and fingers crossed Dutty 3.1 will be good enough for me as I don't need YouTube.
EDIT2... Worked for a while, now has the same problem as earlier.
Are you using the version form 1st post?
If not, please use it.
By the way, something is really wrong... AFAIK "Invalid parameter" has error code 87, 0 is "success". I've looked at program code to see where I could mess up memory, but I saw no such places. Help with finding this bug (you've got the source) would be very appreciated.
hi kosherpig
can you add a settings file where we can put our personal process to stop?
I've try to modify the source but I'm not able to compile it
kosherpig said:
Are you using the version form 1st post?
If not, please use it.
By the way, something is really wrong... AFAIK "Invalid parameter" has error code 87, 0 is "success". I've looked at program code to see where I could mess up memory, but I saw no such places. Help with finding this bug (you've got the source) would be very appreciated.
Click to expand...
Click to collapse
Hi Kosherpig, I am using the version from the 1st post.
I'm happy to help finding the bug, but not sure what to do here! I THINK it stopped working after I used TomTom7, but can't be sure.
It's only 1635 and it's down to 16% battery already (I think this is a problem with Dutty 3.1), so I don't want to do lots of tests. However, when I'm home and charging it, I'll try each app individually until I pin point which one "causes" the problem.
Does this help? Anything else you want me to try?
Hi kosherpig, getting on great with NoTSR now, I just have one small idea that it would be nice to show the memory stats in the pop up dialogue in a similar way to oxios hibernate. Unless of course this would significantly affect the size and speed of the app, in that case I think it is easy enough to check on the memory usage other ways with a couple of quick taps.