Related
Hello All,
I don't know what is the problem. It seems ok for the first time after i installed the version 4.0 that comes with the CD. It works fine. But for the second time, it just 'connecting'. Have gone thru' the troubleshooting processes but without success. Also tried to install the new version 4.1 but won't work.
Pls can someone help me on this.
rgds.
zainal.
does it sync over BT?
i had the same problem before & i still do, but soem other guy here in the forum said it worked for him when he uninstalled AS then reinstalled it again.
try it, it might work with you.
until now i'm still stuck with BT syncing, i cannot sync over USB.
i still get "connecting" message all the time with no progress.
Hi Guys
I had EXACTLY the same problem, alhough I could not get BT to work but could get IRDA to work.
Here is what I THINK the problem is, by the way i-mate were useless it was a colleague at work that had finally found this problem on his device.
WM5 devices when connecting via USB create a NETWORK. Strange but true.
SO, open Control panels, open Network Connections.
Attach your K-JAM (or other WM5 device) you SHOULD see a new network get created with a random number at the end of it (the number changes depending on the USB port you use so you MAY need to do this procedure again if you connect via a different USB port).
Get the properties of this new network when it opens you should see that NONE of the services are checked.
Check them all.
Close.
Everything SHOULD suddently spring into action, it certainly did for me.
It appears that some PC config's (all our work ones) need to be configured this way were as otheres set themselves up fine.
Let me know if this works.
Cheers.
Robin
the wierest thing just happened.
i wanted to try your solution, i opened the network connections folder, connected my kjam, and for my surprise it just connected without me doing anything, and i had it sycronised over the USB.
BUT, the wierd thing, is even though i have the connection, and it is syncronizing with my laptop, i don't have the connection icon on my kjam, instead i had this message (attached).
what does this mean?
Don't know, I have never seen this!!!!
Robin
the strange things keeps coming...
when i wanted to sync my device again this evening, my whole laptop freezes without any responce.
can someone here tell me what's the problem i'm having here? & how to solve it?
i don't wonna format my PC over this.
thanks all in advance.
I have noticed that the synchronisation only happens properly if I connect to the SAME usb port. If I connect to another port, the laptop picks up the connection but won't synchronise.
Connect to the same USB port and voila!!
Hope that helps.
See my reply earlier.
Each different USB port you connect too AS creates a NEW network with a different number on the end of it.
You have to open the network properties for all the networks (with numbers) you intend suing and make sure all the properties are checked.
I use 3 different USB ports on my laptop depending on wether it is docked at home the office or undocked.
I have had to do this procedure for each port but now they ALL work smoothly every time.
Regards.
Robin
i did connect it to the same USB port, but no luck there, the same problem. i uninstalled the AS twice and re-installed it but it's the same.
hi.
i have tried yr solution by ticking all the boxes in the 'new' network properties. won't work though. the sync. icon shows 'connecting'.
mzk78 said:
hi.
i have tried yr solution by ticking all the boxes in the 'new' network properties. won't work though. the sync. icon shows 'connecting'.
Click to expand...
Click to collapse
Strange.
I know a number of people this worked for.
You could/should also try disabling your firewall and giving it another go.
Robin
Hi
I want to use my XDA2i to connect my laptop to the net....
Any ideas how to achieve this, thinking bluetooth laptop to XDA then use GPRS on XDA to connect.
Thanks
Hi,
Look overhere ftp://xdaupload:[email protected]/USB_modem/ for modem driver & documentation.
Cheers, M
Hi
Thanks for the reply, however, I want to connect my laptop through bluetooth to my XDA and use the GPRS on my XDA to connect to the net.
I need to achieve this without using a USB connection, if I understand correctly the link you supplied tells me how to connect USB modem etc.
Maybe I'm completely misunderstanding. It's all so simple using a Nokia 6230i, plug and play virtually!! (until my company deactivated data calls:-()
Any help would be appreciated.
Thanks
Set the Connection Type to Bluetooth in the Wireless Modem program, then push the start button & make the BT connection to your laptop. Hope it works this way or experiment a little with it pls. I use the USB connection & don't have BT on my PC, so can't try the settings myself.
Regards, M
As I assume that you're using Windows vom Micro$oft, just Pair the two devices (not using 'Wireless Modem').
It will automatically install a Bluetooth-Modem
David
Hi
What type of connection do I need, I can only find a network access connection to my laptop, thats all that is available.
I am using a HP laptop with XP home, its a new one so would imagine everything is in order.
seek and you shall find
http://forum.xda-developers.com/viewtopic.php?t=24383
Thanks for the replies people...
Although I have to admit I'm struggling still....given up on the bluetooth connection and reverted back to USB cable but still I can't connect.
Here's the steps I have used:
Unticked Active Sync allowing USB connections.
Restarted laptop, connected USB cable to XDA and selected Wireless Modem, used the drop down to select USB and selected Start.....
the documentation etlls me that my laptop will go into a plug and play routine of allowing me to install it as a modem but this does not happen.
And yes, I have admin rights on the laptop.
Do I have to do anything with connections/modems because I haven't.
Am I being thick? Not sure but it's driving me to distraction...
start the modem program on your XDA (Start-Programs) and conenct it, windows will ask for a driver. install the driver from ftp. then create a new modem connection in windows. here (in germany) the number windows must call is *99# (for GPRS/UMTS)
Thank you for your patience...
The XDA installed as stated using driver on FTP, great.
Run up IE, tools, options, connections and added a dial up connection called XDA USB Link.(com8)
Settings of which are:
user name2web
passwordassword
untick automatically detect settings
untick configuration script
untick proxy server
Not sure where I'm going wrong but when I dial it errors with...No dial tone detected.
To recap I am dialing with GPRS connected on XDA and the WModem program connected through USB started
Am I missing something?
Can anyone help??????
Please?????
Try running usbmodemdialer instead of DUN by IE, it's in the package on the ftp.
Cheers, M
Hi
OK, I am now using the HTC USB dialer but I'm receiving an error 734 code, which is a PPP issue.
To recap, I am starting Wmodem, connecting to laptop (GPRS off) using a USB cable. Starting HTC USB Modem with APN as Internet & modem as HTC USB modem.
On XDA I get a connection light, then send and receive lights flash before the lot dissapear. The laptop goes through Connecting/verifying/registering then Remote access error 734.
I'm nearly there...
Please excuse my ignorance on this subject :roll:
Thanks
Yeah seems like it again :--(
Upload is running to ftp://xda:[email protected]/Uploads/
Regards, M
Hi
Ive done everything as suggested but I'm getting a 680 error, this I believe is a "no dial tone" error.
Please, where am I going wrong?
Thanks
Gary
Frankly I haven't got the slightest idea what's going wrong. It works like a charm with my magician & Windows XP Sp2.
M
Hm how could the line be busy? are you phoning the same time? (always when you try to connect? sorry silly question.)
Are you sure your provider give you GPRS Access? (i don't know any who don't )
did you a google search on this error?
Hi
Yes, I googled it and it appears to be "No dial tone" not line busy....I'm not in a call when attempting to connect.
I've tried every possible combination of settings......usernames and passwords etc....
There isn't any issues with my laptop and updates etc. I am sys admin by day!!! This is just beating the hell out of me. Incidentally my laptop is a HP pavillion zd8369ea, a new one!!! Alpine is running radio 1.04.
Yes, data calls are enabled on my SIM, I can connect perfectly to IE on XDA and mail etc.
Taken down all firewalls etc and nothing....
Help
Thanks
Gary
Follow the instructions here:
http://www.seeo2.com/html/HowToUse/XdaII/How to setup Wireless Modem for Bluetooth.htm
At part 5. the line you need is:
AT+CGDCONT=1,"IP","mobile.o2.co.uk","",0,0
At point 11. you don't need a user name or password.
How can you use GPRS Internet from your O2 Exec/JASJAR on Laptop/Desktop computer?
I am guessing there should be a way through the wireless modem. Any ideas guys?
Activate the wireless modem, install the device as a modem on the computer.
Dial *99# with the computer..
Hi all
I just avtivated by wireless modem through similarly named app on Exec.
Then on laptop dialed *99# and all was looking well until Win XP laptop said registering computer on the network.
Then error message on Laptop said device wasn't functioning.
Whilst it was trying though the coloured lights on the wireless modem(exec) app were flashing away like merry.
That was entertaining enough but any clues as to where I'm going wrong?
Using a bluetooth dongle with IVT soleil on laptop.
Which works for activesync and headset.
Have stopped activesync on exec in order to get this far.
Phil
You have to install USB modem drivers for your Exec on your XP desktop. I don't know if the modem will work through bluetooth. I use USBmodem drivers with my Vario and it works perfectly. I don't know if you need to use different drivers for your Exec, but I will attach the ones that work with the Vario.
fillippe said:
Then error message on Laptop said device wasn't functioning.
Phil
Click to expand...
Click to collapse
Try a soft reset (that worked setting up a mate's Universal with the same error), sounds like you have the modem installed and everything else set up.
Btw when his couldn't connect with that error, it couldnt connect to the network when not functioning as a modem anyway.
thank you for the modem driver for Universal! I really looking for it :wink:
this is about the best walkthrough i have ever read. so Koksie thanks if you wrote this....
anybody got any ideas when this error comes up when i go to start "4- Then in Programs, click on "Wireless Modem". With the Connection type on USB, click on "Start". " and i click start thie error "ERROR .... COME OPEN ERROR"
any ideas what that means?!
Jay
I did not write it myself, just found it and passed it on because it worked perfectly for me. I have no idea why it gives the error you mention. I think the walk through was found on this forum, perhaps try to find the thread and ask the question there? The person who posted this originally might perhaps know the answer. good luck!
I've tried this loads of times all I get is a COM OPEN ERROR on the XDA.. it did work once briefly then wont work again..
I've tried this loads of times all I get is a COM OPEN ERROR on the XDA.. it did work once briefly then wont work again..
I had the same problem. In bluetooth settings delete all the outgoings port that you created. In my case it was port 8 for gprs....Now works¡¡
well thanks for the help.. lol although that doesn't sound to promising maybe i will take it back to o2?
arhh just saw dherrero's reply i may try thatl
jay
hey hey! great thanks for that works brillantly. now i just need to test my tomtom to see if he can stil connect to my GPS device:
Update
Koksie and Kevino most helpful.
I gave up on Bluetooth and got me USB cable out.
The USB modem connects and works well now.
I am not sure the "receive all incoming beams" tick is neccessary?
For O2 customers I found this which was quite useful for the USB Modem Connections settings on the Laptop/PC.
http://flash.o2.co.uk/productsservices/mobileweb/pdfs/Windows manual set up instructions.pdf
BTW I can connect for my emails but have to setup a new Email Account in Outlook to send using the O2 smtp server (smtp.o2.co.uk).
However I still can not get Internet Explorer to be able to browse on this GPRS connection, any ideas?
Re: Update
fillippe said:
BTW I can connect for my emails but have to setup a new Email Account in Outlook to send using the O2 smtp server (smtp.o2.co.uk).
However I still can not get Internet Explorer to be able to browse on this GPRS connection, any ideas?
Click to expand...
Click to collapse
Well m8...as you bring this up...
If anyone can shed some light on this it would be great.
It seems to me tat this problem is only with o2 :?
I have also tried in the passed to make phones work with laptops an tomtom go's etc for the gprs connection usage and had no joy.... at first i thought it was the phones...tested with Nokias 6310i, 6230, 6230i, SE t630, w800, w900i, etc all running the latest firmware and 02 active settings and always connection errors.
In the meantime ALL the other networks like voda, t-mobile, orange etc work like a charm on the same setups.
:?: :?:
BR
I have an AT&T Tilt running Laurentius26's L26KDV12 (Windows Mobile 6.1) and I would like to use the device as a USB modem - NOT for internet connectivity but to connect to remote monitoring devices around the state that have modem's installed in them (for example, from my desktop I have an external 56K modem connected to COM3 - I have several HyperTerminal profiles setup with phone numbers, baud rate, etc.. that I open and my modem "calls" these remote monitoring stations"). I would like to be able to use my laptop and the Tilt (Kaiser) as the modem so I can call into these pieces of equipment while I am traveling.
Any advice - or search tags would be appreciated. I have already searched the forums and did a general Google search but all results turn up how to use the phone as a Internet Connection device - this is NOT to connect to the internet...
Thank you!
Have a search for 'usb_modem.zip' and 'MODEMLINK'. The usb_modem.zip is a driver file for Windows and allows your PC to use your Windows Mobile device as a modem. You also need the MODEMLINK installed on your device which you activate like you do with Internet Sharing. I have MODEMLINK cooked into my ROM and unfortunately don't have a .CAB for it, however I think there is one. It only consists of three files, a shortcut and some registry settings.
I have tested it sucessfully with some dial-up ISPs and it worked fine. When I was initially testing it though I attempted to phone my home line to verify it was dialing out OK and this didn't work. Since it isn't something I use often I haven't pursued this but I think it might have something to do with the 'CSD Line Type' setting in Settings/Connections.
thanks for the information. I did find and download the wmodem software for the phone but when I activate it I get an error message about not being able to access a com port, the cell signal goes dead and I have to reset the phone.
If you have a different version that what I found (5.1.2600.2180) let me know - that may be the difference...
thanks!
mremer said:
thanks for the information. I did find and download the wmodem software for the phone but when I activate it I get an error message about not being able to access a com port, the cell signal goes dead and I have to reset the phone.
If you have a different version that what I found (5.1.2600.2180) let me know - that may be the difference...
thanks!
Click to expand...
Click to collapse
When I launch Modem Link I select 'USB' as the connection, Baud Rate is 'Unused' and Access point name is set to the GPRS APN I have configured (however this is unused I think?). I then hit 'Activate' and ActiveSync disconnects and the 'HTC USB Modem' is then connected to COM4. I can query the modem from the Control Panel applet on my PC like any other modem. I can also open HyperTerminal direct to COM4 and enter 'AT' commands. I just tried dialing my home phone again and this didn't work, however dialing an ISP did.
Andy
Hi, I have this strange problem on my Hermes:
I try to establish a Shared Connection via USB.
It works OK few minutes...
The conection speed is good..
But after 2 or 3 minutes...
This message appears on my PC: "USB Device Not Recognized. Please disconnect and try again, if not recognized, please replace it"
Obviously after this message appears the connection drops. The only way to restore the situation is to reboot the hermes or the pc
I tried several computers with several operating systems (Vista, XP, Linux) with same result. Also I tried also several Roms: Schap's last one, Niax's last one... Always with the same result.
All the other USB functionality works great USB Syncing, WMStorage, etc..
My Hermes 100 is an Orange SPVM3100 with HardSPL/OliPro
Anyone have any idea of what can be happening?
Of course, MANY MANY thanks in advance in GREAT and SUPERB job of everyone that participate on this forum
Best Regards and nice 2009!
Almost as if it's detecting the Hermes as some other type of device.
Can we assume Advanced USB functionality is Unchecked.
What about with a clean ROM no extras (eg wmstorage settings).
Mike