Is there an application which control the blinking lights in XDA IIs? I find it annoying to see blinking green, red and blue lights.
one way, which was working under wm5 is to change the registry entries...
To turn off the Blue LED from coming on with Bluetooth go to:
1. Hkey_Local_Machine/Drivers/Builtin/BWLEDMGR
1a. Change the Index value below it to "0" it is currently set to "1
Soft Reset and the Blue LED will not turn on.
Here is a revised procedure for turning the Green LED off. Cabrio came up with this.
2. To keep the Green LED from flashing or coming on at all go to
Hkey_Local_Machine/Drivers/Builtin/NLEDMGR leave the dll name as NLEDMgr.dll
2a. Change the Index value below it to "0" it is currently set to "1".
This seems to completely shut off the LED and keeps it from getting called up.
Make sure you soft reset after making the reg. change.
the other way is to use tweaks 2k2
http://www.tweaks2k2.com/portal/index.php
it was working under wm5 too...haven't tried it on wm6yet...cuz i simply like the leds and think it's useful...
Thanks nyuzsi. Will try that out.
you are welcome...
How do i remove the blinking wifi connection?
nyuszi said:
you are welcome...
Click to expand...
Click to collapse
Related
Hi, i've had my XDAII from O2 for 3 weeks now and have a few questions.
This morning when I woke up the XDAII's power/charge light was 'red'. According to my O2 manual, it's 'amber' when charging, 'green' when fully charged, and 'green flashing' when phone is on.
I pressed the Power Button and the XDAII sprang to life as usual, no apparant problems (ie no error messages or anything).
Any clues what red signifies, have searched but not found any answers yet.
Many thanks in advance.
PS device has latest O2 UK ROM (v1.60.50).
it means you missed a call.
i found it to be an extremely good addition over the XDA, in that you don't have to turn your device on to see if anyone called you. You'll also see a phone+exclamation mark on your taskbar. The red light will disappear when that icon is clicked.
I'm not sure if this also happens when the caller does not transmit their number.
so:
Green non-blinking = on cradle, fully charged
Yellow non-blinking = on cradle, charging
Green flashing = device on
Red flashing = missed call
Adding to this, it is not set up by default to flash red when you have received an SMS or mms.
But you can change this behaviour from the Sounds and Notifications options on the device.
And this is much more handy, in that you can then send a text to a friend, switch your phone 'off' (i.e. power off the screen etc), and only a glance at it is necessary later, to know if you have had a reply or not.
Great in noisy environments, or in a car etc.
Red Light Stays on even after dismissing reminder
I have my XDAII set up to display the RED light for a reminder (An Alarm). However, if an alarm goes off while I am away from my XDAII then the red light remains on even after I dismiss the reminder. In other words it is not resettign to Green. The only way to reset it is to do a Soft reset. HAs anyone had the same problem or have a solution?
yah I've had the same problem that my red light stays on after an alarm goes off, really annoying that you have to soft reset or play around in the the notification settings and then it disappears
Isn't the flashing green light supposed to flash amber if there's a missed call or unread text message? I know this used to be the case when I had the Vario 1 (Wizard), so wondering whether my Vario 2 (hermes) isn't working properly.
or maybe you just dont have it set to do that?
silly me... I had this set on my old phone for so long I forgot that it's not a default setting. Sorted out now. Thanks.
May I ask what software did you use for this?
You don't need software, just go to start, settings, sounds & notification, choose the notifications tab, and then from the drop down list, select the event you want to have a flashing amber light for (e.g. Phone: Missed Call), tick the box 'Flash light for' and choose the length of time.
Mine flashes amber all the time. I do have those settings enabled, but it never has flashed green, although it glows greenwhen fully charged. Ideas?
AlbertoM said:
Mine flashes amber all the time. I do have those settings enabled, but it never has flashed green, although it glows greenwhen fully charged. Ideas?
Click to expand...
Click to collapse
Never mind. Rebooted, all is well....d'oh!
how can i turn off blinking green and blue leds during the normal operation?
I saw this reg hack on a xda post, but it looks like it also turns off vibrate:
"Figured it out! I changed a reg key to turn off the blinking LED indicator and apparently that key also controls the vibrate function."
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\AllLEDMgr
Key = Index - 0 or 1
There is also a CAB file available in this forum!
Look around for that post, this is probably the best solution........
I know this problem has not been resolved yet. However I read that if you boot android when the keypad lcds are off, they will stay off. That is my problem. Im unable to boot android when they are off because they stay on for the duration my screen is lit, in other words, they only turn off when my screen turns dark. To wake the device up I must press the buttons which turns them on again. How did you guys work around this?
the keypad backlight is only on for about 10 seconds...
if this isnt the case you have installed a little tool that it hangs together with the lcd backlight...
my keypad lights don't turn off at all for some weird reason..
also my orange led at the top stays on always..
rmsa786 said:
my keypad lights don't turn off at all for some weird reason..
also my orange led at the top stays on always..
Click to expand...
Click to collapse
are you using the latest zimage?
http://forum.xda-developers.com/showthread.php?t=732380
You should try to look in the startup folder of windows. It might have keypadledcontrol.exe which makes it "keep on" while the display is on. Just remove it from ur startup list and you are done. now the keypad will turnoff after 10 sec (by default - configurable through registry).
I hope it sorts your problem out.
I have a samsun s4 i9505, and since a month or so , when i connect the phone to charge and the displlay goes of the red led that is supposed to stay on its not, also when tyhe low battery either.
I have try the menu *#o*# and in the test of the leds the red it is on as the blu opr green.
I have clean up my phone with a hard resert and even witout any applications intaled only the ones that came with the phoe the led doesnt work.
I looked at the adjust display led configuration and the option it is marked.
And dont know what more to do, i any of you have the same problem please let meknow if you get the solution for that.
I also have tried programs to ontrol the leds but still not working, i have vhange the color notification for whatsup from lue to red and nothing i get the messages but the led doesnt blink as just before foes.
Please HELP
Thanks
Try to put ur phone charging and press the button Power one time (Lock/Black screen). Tell me if the RED LED appears :highfive:
EDIT: Go to APPS - SETTINGS - MY DEVICE - LED and tick all options
Joku1981 said:
Try to put ur phone charging and press the button Power one time (Lock/Black screen). Tell me if the RED LED appears :highfive:
EDIT: Go to APPS - SETTINGS - MY DEVICE - LED and tick all options
Click to expand...
Click to collapse
I did what you say anf the led doesnt appears
I think is maybe something wrogn with the red led because if i changw the coloeçr to blue during the chrge works
USING LIGHT MANAGER I CAN PUT ONLY BLUE AND GREEN ANY CMBINATIONS WITH RED DONY WORK
Joku1981 said:
Try to put ur phone charging and press the button Power one time (Lock/Black screen). Tell me if the RED LED appears :highfive:
EDIT: Go to APPS - SETTINGS - MY DEVICE - LED and tick all options
Click to expand...
Click to collapse
Yesterday i tryed again what you told me and the red light appear but only for a few seconds after that when out again.
Thats helps.