Related
Hi,
I've recently purchased an xda 2 from O2 it came with a free bluetooth headset, but I've a few problems and wondered if anybody could answer a couple of questions.
1. The little blue flashed LED, is it meant to flash all the time that bluetooth is being used? It seems to start flashing and then just stop.
2. When I go into my bluetooth settings and turn it back on when it's switched itself off I don't get the LED flashing then I go back into the settings again and it says that it's off. Is this what it's meant to do?
Any good guides/tools about using bluetooth with this device?
Beginning to pull my hair out and I've not much to spare!
Cheers
Marc
Free? from O2? how?
1stly howd u manage 2 get sumit out of O2 for free? i would be worried about that allready!!
what bt Headset did u get? with mine, i get a blue light flashing intermitently when the headset is turned on, and it doesnt change when im making a call.
which bt settings are you talking about? obviously you need to have bonded with the device, which the headsets instructions should cover.
to turn bt on the phone on you click on the bt icon at the botom of the active screen and select the On radio button.
if headset profile is enabled then there should B a small blue headset symbol next to the bt symbol, if its not set, or not turned on then it will be gray. if it is gray then click on it and hopefully it will turn blue to activate the headset profile.
there are sum interesting bt tools around, but the "recomended" setup is the Pocket Bluetooth Tools for the O2 XDA II and the MDA II which is available from here:
http://bluetooth.i-networx.de/index_e.html
I hope that helps.
Smiley
sounds like you are using bluetooth tools and have got the clock symbol live (not greyed out), it times out the internet connection but doesnt seem to tell o2's software that it turned it off so when you go in, it quite often seems to think its on when its actually off !!
Hi, I didn't have the bluetooth tools loaded, but I've downloaded them from the site you suggested and everything seems to work better.
The headset did indeed come free from O2 I was quite surprised too.
I've think I've attached an image of it, not sure what make it is does BlueTrek sound good?
Yeah that sounds about right, their website doesnt actually give any details, helpfull as allways!! :roll:
neway, have u got everything working properly now?
Smiley
Hmm...somebody had the same problem with his Bluetreks G2 and the XDA2.
He did a special pairing mode and it solved the problem.
I think its in the G2s instruction manual.
Had a look at the manual can't see anything special in the way that you pair the G2 to the XDA2.
Do you use this bluetooth toolkit?
It still seems flaky, I tried answering a couple of calls with the headset yesterday and nobody could here me at the other end of the phone. Sometimes I get it where the phone says that I have "no bluetooth available" I have to remove the battery and insert it again. Is this normal?
Regards
Marc
Marc,
I get the same symptoms you describe when I'm using ActiveSync with my XDA2 over bluetooth, but never with my HBH-65 BT headset. I'm not using any additional bluetooth tools or anything like that. Just the standard built-in bluetooth on my original (November 03) ROM.
Sometimes if my bluetooth ActiveSync connection is idle for a while the connection drops and the flashing blue light on the XDA2 goes out. However, if I tap the little blue BT icon at the bottom of the Today screen, the setting shows that BT is still turned on. I have to tap it on, then off then on again to cycle the status and convince the machine that bluetooth is really back on again. :? This sounds like the problem you describe.
However, no problems like this with my BT headset, which works perfectly.
This isn't any help, but at least you know you're not alone!
Does anybody know if a registry entry exists to turn the bt headset profile on and off?
I've got headset working now but it switches off frequently.
Cheers
Marc
I have a BlueTrek G2 for my Imate and it's working with no problems at all ... I tried BT tools but didn't find it useful as I thought it will give me a "Hands free" profile but it doesn't :x
mokl: maybe it's a ROM issue ... mine is 1.72 WWE, what's yours ?
The rom version is 1.60.00WWE
Just to let everybody know, I had some major problems with my bluetooth on my XDA 2. Tried everything, eventually got a replacement from 02 and the new one works fine now, so it must have been a hardware fault.
I bought my qtek last week and trying ever since to get it connected with my carkit..
Sometimes this works and I can hear and talk through my carkit. Other times it only rings through my carkit and when i pick it up it disconnectw with the carkit and goes back to the qtek. Or it doesn't connect at all.
I've tried several things..
-first I wanted to try the new bluetooth patches.. this works a little better for example without switching on the qtek and turning the key, they automatically connect. Not all times but ik works a little better.
-trying to put a new ROM version on my qtek, got a country id error.. Got rid of it using the xda3nfbtool.. then got a radio image file checksum error.. Don't know how to bypass this because it has to do with the passwords in the xda3nfbtool.exe..
So now I'm here, hoping that some wizzkids know how to get a permanently good bt connection...
Who dares??? Or has suggestions??
Thanks in advance,
Sorry my english isn't my main language
BMW BT with Blue Angel
Same problem here. Have tried all available patches. the 3500 BT version works with the least amount of trouble. But even with this one I never know how long it will take to get it working and wether I will hit a tree in the meantime.
A Friend of mine uses the Motorola Carkit with no problem. I think the BMW System is too complicated with i5s address-book synch to work. By the way, how many adresses do you havein your qtek?
Hi,
I do have at least a very similar problerm with my Audi BT. I can connect, it works just fine when I make a call, BUT it looses connection after picking up an incoming call...
I tried all stacks I could get my hands on from 1900 thru 2400 till 3500 and even 6600...
Anyone with an idea!?
TIA
PEACE AND B WILD!
Re: BMW BT with Blue Angel
jofeuerstein said:
Same problem here. Have tried all available patches. the 3500 BT version works with the least amount of trouble. But even with this one I never know how long it will take to get it working and wether I will hit a tree in the meantime.
A Friend of mine uses the Motorola Carkit with no problem. I think the BMW System is too complicated with i5s address-book synch to work. By the way, how many adresses do you havein your qtek?
Click to expand...
Click to collapse
Don't know how many adresses, about 150... But at this time I have none in the PDA, just to test if the BT connection will work... But it has to do with the connection and not the adress book... I just found out that different models of BMW could have different model of BT carkits. And BMW uses a siemens carkit according to a mechanic from BMW.
I hope someone has the brains to pull this of.. Because how is it possible to get a only sometimes connection. This means that it could work, or is that just my postive attitude.
bmw car kits
by wot i understand bmw are about 100000 years behind with there software on the car kits 6600 t610 v600 etc all work but your new one dropn in and out all the time
Blue Angel and BMW Bluetooth Blues
at Denis123: thanks. I have 4000 adresses on the PDA and thought the problems come because the BMW tries to download them ... if you have the same problems with 150 adresses, then the adresses are not the cause. At the moment with the BT 3500 (+ this small fix on the download section) the paring works and connecting the MDA when I get into the car works mostly. What drives me nuts is that it doesn't work ALWAYS. Sometimes i have to tinker for 15 Minutes while driving until it works. But once the connection worked, it functions very reliably ... until the next time I get into the car.
So the best I can recommend: Latest ROM version plus BT 3500 + this funky extra fix which I don't know what it's good for.
Re: Blue Angel and BMW Bluetooth Blues
jofeuerstein said:
at Denis123: thanks. I have 4000 adresses on the PDA and thought the problems come because the BMW tries to download them ... if you have the same problems with 150 adresses, then the adresses are not the cause. At the moment with the BT 3500 (+ this small fix on the download section) the paring works and connecting the MDA when I get into the car works mostly. What drives me nuts is that it doesn't work ALWAYS. Sometimes i have to tinker for 15 Minutes while driving until it works. But once the connection worked, it functions very reliably ... until the next time I get into the car.
So the best I can recommend: Latest ROM version plus BT 3500 + this funky extra fix which I don't know what it's good for.
Click to expand...
Click to collapse
Can you tell which type of BMW you drive?? And if it's not to much trouble then mention the ROM, Radio version etc you have on your PDA... That is what I (and maybe others) would like to know.
Thanks in advance..
You say that sometimes it takes up to 15 min to get a connection! Maybe this could be due to the phonebook.. I don't no for certain, but if you're BMW tries to take over the adress book of your PDA that could take a while with 4000 entries.. What you could try is, if you're synchronising with your computer leave out the adresses in active sync. So that there are no adresses in your PDA. Then try to pair with the BMW and see what it does... Maybe then it works faster... I'm curious if you get a good connection between the PDA and the Beemer.... Please let me know.
Greetz
Have just installed:
ROM version 1.22.00. WWE
Radio version 1.06.02
ExtROM version 1.22.557 WWE
Tried it AGAIN in my BMW...
First time connection --> connection failed, BT BMW says erfolgreich (succeeded)
Switch contact on/off --> everything works I can phone, and incoming calls also work.. That's how it's suppose to be
Switch contact on/off --> There is a pairing, but as soon as I get an incoming call the phone goes off in the car, but when I answer afther a few seconds the connection is gone.
Switch bluetooth on/off on PDA --> It works again??!!?!
So a early conclusion is that the bluetooth has to be totally switched off when the PDA is off.. If phone rings PDA switches on and connects to carkit.. Does anbody know if this is possible, then I will try it out???
Thanks
I think I have found a solution. I'm not sure but so far this works..
Now I need someone to help with the following...
The bluetooth on the PDA must be switched of when you turn the ignition.
Then when you have your car running you switch on the bleutooth on the PDA... They pair and connect... I've tried it several times and it works...
Now when you switch of your car and turn it back on again the pairing will work but there is no connection. So in my case the phone rings in the car but when i pick it up it switches back to the PDA..
Conclusion; Only when the PDA is switched on the Bleutooth is allowed to switch on... So when you're being phoned, first the PDA goes on and a few seconds later the carkit is active and you're able to pick up through the steering wheel..
SO THIS IS IMPORTANT..
Is someone capable to make a prog. or to delete something in the original bluetooth prog. in PDA that the bleutooth function isn't always ON, only when you put on your PDA...
I really hope someone can help??!?!?!?!
Thanks
Re: Blue Angel and BMW Bluetooth Blues
jofeuerstein said:
at Denis123: thanks. I have 4000 adresses on the PDA and thought the problems come because the BMW tries to download them ... if you have the same problems with 150 adresses, then the adresses are not the cause. At the moment with the BT 3500 (+ this small fix on the download section) the paring works and connecting the MDA when I get into the car works mostly. What drives me nuts is that it doesn't work ALWAYS. Sometimes i have to tinker for 15 Minutes while driving until it works. But once the connection worked, it functions very reliably ... until the next time I get into the car.
So the best I can recommend: Latest ROM version plus BT 3500 + this funky extra fix which I don't know what it's good for.
Click to expand...
Click to collapse
What is the "this small fix on the download section)" Can't find what you mean?
@tbd: forget the fix. It was an older version that I mistakenly downloaded ->my mistake
@dennis123
In the meantime I use:
Ext. Rom 1.22.01 GER
ROM-Datum 10/26/04
Radio-Version 1.06.02
Protokoll Version 1337.38
ExtROM 1.22.182
Bluetooth 1.0.0.3500
Yesterday morning I went to my car with BT OFF, turned the car on, turned BT on and it worked flawlessly.
Yesterday evening I went to the car with BT ON, turned the car on, and the BT paired, but during the first call it dropped the connection.
Same today. => I have at least one reproducable way to get the darn thing working. I can't say that satisfies me, but i will stop wasting time with this ;-)
Has anyone tried this with BT 3900 ?
PS: Somebody asked what kind of BMW: The car is an X5 build in 9/04, with the Bluetooth interface and without navigation.
I searched and didn't find any previous postings regarding an issue with Parrot and Audi Hands Free (Bluetooth) car kits and the TyTn.
This issue is only with the TyTn and the Wizard devices work fine.
It seems to pair fine with the car kits but 5 minutes into usage...the TyTn turns the bluetooth off on the device.
Then about 1 min later, turns Bluetooth on again. The cycle then begins Off and then On ....
Here's a link on the Parrot forum.
http://www.parrot.biz/forums/english/viewtopic.php?id=2667
I've got the same problem with my Seat Leon (new model) bluetooth carkit !!!
I think it's the same module as in the Audi (all VAG related cars).
It's very irritating !
I hope they will fix it soon....
http://forum.xda-developers.com/viewtopic.php?t=58789&highlight=
:wink:
Er... not followed as far as parrot (down for maintennance) BUT
I've found with my Seat Leon kit that the phone needs to remain in a fully powered state - you can't put it into the sleepy state by the power button otherwise you get the intermittent but eventually endless dingling of it connecting and disconnecting.
Best way I've found is to leave it on asking for a password with the cover on.
edit: Should just point out that you also need to turn off any power off settings - except for the backlight.
Pyranwolf said:
Er... not followed as far as parrot (down for maintennance) BUT
I've found with my Seat Leon kit that the phone needs to remain in a fully powered state - you can't put it into the sleepy state by the power button otherwise you get the intermittent but eventually endless dingling of it connecting and disconnecting.
Best way I've found is to leave it on asking for a password with the cover on.
edit: Should just point out that you also need to turn off any power off settings - except for the backlight.
Click to expand...
Click to collapse
I'm going to try this !
I hope that it works.
Thanks anyway.
What kind of Leon do you have ?
I've got an A6 with BT kit and am having this problem. I cannot make/receive a call whilst running my BT GPS device & TomTom, although from reading this the issue may be the Audi kit anyhow.
Are there any fixes available - be it HTC or Audi? Or are there any work-arounds, such as add-on software for the TyTN??
Please help - it is driving me mad. Spoiling what is otherwise a great piece of kit.
I have been having this exact problem with my Audi A4 with Audi Bluetooth.
I did wonder if it was in some way connected with the phone going into sleepy mode as it is being powered by the phone battery.
Also, the bluetooth stops responding after 5-10 minutes, but if I am continously using the phone, it seems to be ok.
Therefore, I think I need to buy an in car charger, and see what happens...
Has anybody else tried this that can confirm it works?
Markee
Just a quick note to Paul_o
My Audi A4 / SPV M3100 / Tom Tom / Bluetooth GPS work fine together.
If I am in Tom Tom, and get an incoming call, the little call window pops up over Tom Tom, Tom Tom carries on and the phone audio is routed through the speakers - the only irritating thing is that the Tom Tom lady keeps interrupting... :wink:
Mark
Hi,
I'm using Vario 2 with Audi Bluetooth and also having the BT ON - BT OFF issues.
These are my findings.
- Without JETWARE software:
- BT goes ON and OFF in the car regardless of the VARIO 2 being on or stand-by, or the phone being battery powered or connected to the car.
- Once a conversation is started the BT connection seems to be remain ON.
- With JETWARE software
- If I leave the screen always on the BT connection stays always ON. Only backlight automatic switch-off is selected
- I have tried several screen toggle programs (which claim that they only power down the screen) but the BT goes OFF in the car after a few minutes.
I'm happy to test any other proposal.
Cheers,
C
What version of JetWare are you running, they have a beta which has settings for the Audi kit, this may help, there is also a registry setting that is meant to change the power settings when bt is connected. An extract from an email conversation with Jetware...
We have also addressed the power issue, but this fix requires a registry change. Please create a DWORD registry value in HKLM\Software\JETware\AGExt named InSessionPower with a value of 0 (valid values are 0-4, with lower values indicating greater power availability). This will tell the OS that the Bluetooth device should stay at full power while it is in a Hands-free session.
Not sure if this will help, my Hermes is ariving on Monday, I'm was hoping that all the problems i've had with my magicain and the audi kit would go away with the Hermes, but maybe not.
Give the key a go and let me know
Hi dh,
thanks for your reply.
I haven't installed the Beta version yet. However I have changed the registry setting and will test first thing tomorrow. If this doesn't fix the problem I will try the Beta version with the Audi setting.
I'll keep you posted.
Cheers,
Carles
Hi dh,
I have tested the two proposals (Change in the registry and the Beta version + Audi settings) without much luck. The BT connection with the car keeps going ON and OFF when the phone is running on battery.
Have you got your Hermes? any luck?
Thanks,
Carles
Got my Hermes (Orange M3100) a couple of days ago. I've installed the JetWare extention, and without the InSessionPower set the connection is dropped. So far with the setting applied it has stayed connected. I have had other problems like not being able to make calls etc, which is a bit of a issue. I need to do some more testing, as i've been messing with the phone a bit.
I'll update here in a couple of days
Must say i'm very disapointed with the phone regarding this. A couple of weeks ago i had a Wizard which worked flawlessly with the JetWare extention, no power issues, calls made and received without a single problem. I wonder what has changed with the bt implementation between the Wizard and the Hermes?
Hi dh,
You will see from my previous postings I have had the same problems too.
It should be noted, though, that the Vario (wizard) worked flawlessly with the Audi A4 Bluetooth without Jetware software.
Has anybody been able to prove there is no problems if the phone (SPVM3100) is powered whilst in the car?
Cheers
Mark
I have a factory fitted hands free system in my Vauxhall. Every other phone you can think of works with it...EXCEPT my XDA mini. It seems to pair up, but there is no signal showing from the carkit. It might work for a minute and then it drops out. Is it the XDA or Vauxhall that's at fault? It seems that nobody knows the answer and I paid serious money for this bit of car kit. I like the phone, it really is annoying. I have tried another XDA mini as well and that doesn't work either. Does anybody else have a Vauxhall with the same built-in system and not connecting?
Markee
I've had the phone plugged in without the registry entry and it seemed to be ok. If I can get to a stage of a working solution i'll test again without the registry entry and with external power.
dh said:
Must say i'm very disapointed with the phone regarding this. A couple of weeks ago i had a Wizard which worked flawlessly with the JetWare extention, no power issues, calls made and received without a single problem. I wonder what has changed with the bt implementation between the Wizard and the Hermes?
Click to expand...
Click to collapse
I'm guessing that since they went from BT1.1 to BT2.0 they had to make a new stack.
My Wizard worked PERFECTLY on my Parrot, my TyTN is almost useless on it.
you make a very good point ScottC, that'll be what it is.
Just driven home and could not make a single call with Jetware installed. Removed it and i could at least make a call, but i didn't get any status info or phone book. I didn't get a chance to leave it connected without Jetware for longer enough to see if it disconnected without external power, i imagine it will. I will test some more later/tomorrow. I'll also send an email to Jetware to see what there thoughts are regarding bt v2.0 and their product
Hello,
I have an Audi A3 with the factory fitted Phone kit but without the Audi Craddle so I'm using the Bluetooth connection.
I have tried the Vario (Wizard/QTEK 9100) and Vario 2 (Hermes/TyTN) and had similar problems with the two of them. Once the connection is stablished I can make and receive calls without problems. The issue is that the BT connection goes ON and OFF without an apparent reason.
The only thing I have seen is that when the Vario is kept on (only the backlight is off) the BT connection normally stays ON, regardless of the phone being powered or not.
I have tried Jetware, the Beta version, the registry entry, programs to switch off the screen...but haven't seen any real difference.
I have bought a bluetooth USB stick and will do some test at home to see if the problem is with the car or the phone.
I called T-mobile and they said it was a faulty phone, but I don't think so.
Keep the postings, we might end up finding a solution
Cheers
C
Try upgrade the BT software. I had the same problem after that i upgraded de Parrot software. Now i have the version 4.16
Hi all,
I know there are plenty of threads about the TyTN bluetooth issues, but my questions differs in two ways which I have yet to come across:
I do NOT have M$ VoiceCommander installed (and don't want to install it)
My bluetooth issue relates to my car's handsfree feature - my TyTN randomly connects and disconnects. Apparently Audis, VWs, BMWs, and Acura's all suffer from this this problem.
The situation:
When I start my car, the phone will successfully merge with my TyTN. Approximately 30 to 60 seconds later, the connection will be lost. Shortly after that the connection will re-establish itself, then it will disconnect itself a short period later. This pattern repeats endlessly.
I've tried each of the following Tweak programs but none have helped.
jetwaremobile
Tweak2k
HTweakC
I've heard that there is some kind of registry tweak that will prevent the bluetooth stack from disconnecting from my car's handsfree feature, but after looking for about 2 days now, I can't find it. Can anyone help?
thanks.
jm
Yep, got exactly the same on my BMW 630....
Can t find any tweak but....
I am a heavy email user (thru BlackBerry connect) and I noticed that
the higher the number of messages stored, the higher disconnections appears.
At the same time, the TyTn is slower and slower....so my idea that this is related to some timeouts somewhere....
For your complete info, the MS bluetooth stack in my previuos S100 have able to.....immobilize my 630 !!!!!!!!! yes, incredible...
The MS stack messed up with the BMW bt ...and this later would stay ON for ever...even after switching car s power off.
This was sucking the car s battery untill the car would start !...
BMW could not reset the BT module unless disconnecting battery....but...then the active steering had to be re adjusted with the proper BMW computer...
This is a real story.
johnmclean said:
Hi all,
I know there are plenty of threads about the TyTN bluetooth issues, but my questions differs in two ways which I have yet to come across:
I do NOT have M$ VoiceCommander installed (and don't want to install it)
My bluetooth issue relates to my car's handsfree feature - my TyTN randomly connects and disconnects. Apparently Audis, VWs, BMWs, and Acura's all suffer from this this problem.
The situation:
When I start my car, the phone will successfully merge with my TyTN. Approximately 30 to 60 seconds later, the connection will be lost. Shortly after that the connection will re-establish itself, then it will disconnect itself a short period later. This pattern repeats endlessly.
I've tried each of the following Tweak programs but none have helped.
jetwaremobile
Tweak2k
HTweakC
I've heard that there is some kind of registry tweak that will prevent the bluetooth stack from disconnecting from my car's handsfree feature, but after looking for about 2 days now, I can't find it. Can anyone help?
thanks.
jm
Click to expand...
Click to collapse
I have the same problem with a CK3100 kit, don't have a solution, but would like one, didn't have this problem with a Jasjar nor Wizard
TyTN bluetooth | random disconnect when using car handsfree - more details
Thanks for the replies so far.
Although the following thread did not help me with my problem, it might help one of you. If you're having problems mostly related to issuing voice commands using M$ VoiceCommander, I think there *might* be a solution in that other thread for you.
Just to reiterate my problem; my TyTN keeps randomly connecting and disconnecting from my car's built-in hands free bluetooth device.
There was a time when if i managed to made a call after first starting the car - before the first random disconnect - the phone would remain connected until the next time I started the car. That no longer appears to be the case.
-jm
I solved the BT problem with my Orange SPV M3100 by setting it to never switch off the display automatically (only switching off the backlight after 20 seconds or so). I also use an in-car charger to power the TyTN. The car is an A6 with RNS-E (BT enabled) and TyTN works fine and never loses the BT connection as long as the display is active.
This is a mid-term solution though and I'm still eagerly waiting for a ROM update that will solve the problem for good.
Has anyone tried a ROM with aku 3.3?
jasonrhcastle said:
Has anyone tried a ROM with aku 3.3?
Click to expand...
Click to collapse
Yes.
And on my CK3100 I now no longer get disconnects. I did have to uninstall jetware as it wasn't reliable. My TyTN now connects perfectly and no longer drops.
One thing I did find is that the TyTN hates it when more than one handsfree device is in its trusted list. Make sure that the ck3100 is the only handsfree device paired.
http://forum.xda-developers.com/showthread.php?t=247520&highlight=bluetooth+keeps+disconnecting
ajax007 said:
I solved the BT problem with my Orange SPV M3100 by setting it to never switch off the display automatically (only switching off the backlight after 20 seconds or so). I also use an in-car charger to power the TyTN. The car is an A6 with RNS-E (BT enabled) and TyTN works fine and never loses the BT connection as long as the display is active.
This is a mid-term solution though and I'm still eagerly waiting for a ROM update that will solve the problem for good.
Click to expand...
Click to collapse
I've tried changing the automatic switch off setting and it made no difference on my SPV M3100 (with Parrot CK3100) - I reckon that the external power is what fixed your problem (this has worked for others too).
Sadly it's not a convenient fix as I like to leave my phone in my pocket when I'm in and out of the car. Orange say there is no 'issue' so there's no sign of a ROM update but HTC know of the problem but I have to wait for Orange to release their ROM update. I can't use the HTC update. If only us Orange users could tell them enough times they might listen now that some AKU 3.3s are being released. Orange technical department won't speak to end users like me - they have actually refused to discuss it with me and just pass messages back and forth from customer relations. Any other ideas?
A solution - thanks to Parrot
Yippee - thanks to Parrot I have got a solution to the TYTN / CK3100 problem (my phone is the Orange SPV M3100).
As Orange and HTC can't find any solution I kept asking Parrot for ideas. Their excellent customer service department tried various settings which made no difference until I was offered a trial of some beta test software called VCF creator. Once you have the VCF from the PC's Outlook you just need to beam it by BT across to the CK3100 and alter some settings (takes 5 minutes maximum). The small sacrifice is that you don't have auto-synchronisation so if your numbers change a lot you will need to do another VCF upload. The extra bonus benefit is that all your numbers will be grouped together. So, for example, you access someones name and then you can see their mobile/home/work number rather than having a separate line in the main list for each phone number. The problem is a result of how Windows Mobile phones provide the data. With this bonus you can then use voice activation to input a name followed by a keyword mobile, home, work etc. Fantastic!
587dan said:
Yippee - thanks to Parrot I have got a solution to the TYTN / CK3100 problem (my phone is the Orange SPV M3100).
As Orange and HTC can't find any solution I kept asking Parrot for ideas. Their excellent customer service department tried various settings which made no difference until I was offered a trial of some beta test software called VCF creator. Once you have the VCF from the PC's Outlook you just need to beam it by BT across to the CK3100 and alter some settings (takes 5 minutes maximum). The small sacrifice is that you don't have auto-synchronisation so if your numbers change a lot you will need to do another VCF upload. The extra bonus benefit is that all your numbers will be grouped together. So, for example, you access someones name and then you can see their mobile/home/work number rather than having a separate line in the main list for each phone number. The problem is a result of how Windows Mobile phones provide the data. With this bonus you can then use voice activation to input a name followed by a keyword mobile, home, work etc. Fantastic!
Click to expand...
Click to collapse
If you use the Jetware BT software you can do the same thing e.g. beam the whole contact list in one go and then set the Parrot to not sync by choosing the Ericsson No Sync profile. This is how I have mine set up, also with the Jetware software it sends over the Service Provider, Battery and Signal strength settings to the Parrot, something which the native stack doesnt do.
Solution for this
Hey all, i have purchased a parrot 3100, the software in it was 1.6, i had the same problems but it's greatly and successfully solved using the new jetware 1.3 . i don't know if i can post some linx here, but here you go, if this is illegal for this site please remove them
http://rapidshare.com/files/30296941/JetWare_1.3.rar
http://www.megaupload.com/?d=PL5UX5KC
Hi,
hopefully anyone has an answer to the strange bluetooth behaviour of my X1.
The first device is a bluetooth headset from Sony. It works good, if bluetooth is activated. But after some time of not using the headset, the phone just switches off bluetooth. Sometimes after a few minutes, sometimes days after my last use of the headset. I tried all settings of the bluetooth-settings with no change. And it sucks if with the next phone call the headset cannot connect anymore because bluetooth was switched off.
The second device is a GNS TrafficBox Plus FM9BT-Y. Somehow MN7 does not detect the device directly, so I have to use the workaround with the serial port and outgoing connection on COM1.
The initial minutes the connection works fine, but then stops and is not restored.
Here as well trying different settings changed nothing.
How can I find out the address of the bluetooth devices?
Is there a tool to further test bluetooth connections (like what speed can be used, the address of the device, etc)
Regards
pt
Im using Itjes Touch 7 final & i have the same problem - infact i've had it with the last 3 of his roms with my blutooth to SEAT car. I'll be on a call in my car & it switches the blutooth off without warning. generally after about 10 minutes of actual call time. But it doesnt disconnect unless during a call ? There is no rhyme or reason to it, it just sometimes happens?
So any further info will be appreciated
Im using Itjes Touch 7 final & i have the same problem - infact i've had it with the last 3 of his roms with my blutooth to SEAT car. I'll be on a call in my car & it switches the blutooth off without warning. generally after about 10 minutes of actual call time. But it doesnt disconnect unless during a call ? There is no rhyme or reason to it, it just sometimes happens?
So any further info will be appreciated
I have Ra2generic DE with the 1.10 radio ROM on it.
At the beginning it was fantastic not having the bluetooth issue. Everything was working so extremely goood... no switching off, no disconnecting of and from the bt headset,, etc...
After a while the issue was here again...damn! So the bt became not very useful in its functionalities.... then I saw that it was not possible to see through my bt freespeech device in the car the last calls on the phone... hm, ok I said. There were lot of calls (incoming, outgoing, missed, etc) on the list...I erased them all...
Now it is working in a perfect way.... no disconnecting, no switching off..and this with the stock ROM and Radio ROM.
I tried it a few months before posting it here... now I'm cleaning up my calling list every 2nd day (I really call a lot) and I have no problems..
Hope it works for you..
i have the same problem, the bluetooth disconect without any reason, i have tried more than 10 Roms and i dont have any solution
¿is so dificult for Sony to repare this problem?
zagito said:
There were lot of calls (incoming, outgoing, missed, etc) on the list...I erased them all...
Now it is working in a perfect way.... no disconnecting, no switching off..and this with the stock ROM and Radio ROM.
I tried it a few months before posting it here... now I'm cleaning up my calling list every 2nd day (I really call a lot) and I have no problems..
Hope it works for you..
Click to expand...
Click to collapse
I hardreseted the device, installed the newest official firmware, deleted the calling list and with great expectations checked bluetooth behaviour.....nothing changed for me
But great it works for you and thanks for the tip
Come on people..... please someone help us with this
Bluetooth with clarion mind
Am having trouble connecting with my new Clarion MIND - is seems the phone does not see the profiles (very similar to the phone adding the older SE Bluetooth Watch, the 100). Has anyone built a .cab to sort this out?