Need Help with Bluetooth connection between 8525 and Nokia 7370 - 8525, TyTN, MDA Vario II, JasJam General

Here is the situation. Im trying to transfer some files From my nokia 7370 to my AT&T 8525. I am able to pair the devices, but when I try to send files, the nokia says the connection failed.
When I try to send files from my 8525 to the Nokia, it works. The other way doesnt work. I tried the same procedure with a Sony Ericsson phone and I was again able to pair, but was not able to send from the SE phone.
Can someone help?

Is OBEX enabled?
Without OBEX you can't send files
use a configuration manager, such as HTweakC or HTCustom to enable OBEX
Then find a file and send or beam as if you were using infra-red, but enabled bluetooth devices nearby should also be discovered and select them
Here's a link to DiStefano's very good *.cab collection, you can find many such applications there:
http://forum.xda-developers.com/showthread.php?t=319468&highlight=collection

Related

Missing Bluetooth file trasnfer in WM2005 JASJAR

File Explorer does not support Bluetooth file trasnfer , I am using JAS/JAR running WM2005. AM I missing something?
there is a registry change you can make to add support for this - see http://wiki.xda-developers.com/index.php?pagename=Universal_Registry under To change the ability to receive files via Bluetooth (OBEX)
i've not tried this myself, though!
If you don't mind spending on 3rd party software then Resco File Explorer may be your best set and they now have a WM5 compatible version.
Likewise to transfer from your PC to the phone your windows PC file explorer should manage it provided your device is paired. But don't forget to turn on the bluetooth on the device and also the "accept all incoming beams" as this is often confused as being mandatory for IR transfers only.
Kind Regards
access is denied
when i try to change values it give me error of access is denied, can anybody help me
failed
followed all the changes mentioned in this post and try to send a file to my PC. It recognizes my PC but when i click on tap to send...it tries for a few seconds and then gives a status saying failed
I think it is at your PC end, and I have had similar problems depending on the bluetooth setup that I had on the pc, I could activesync on bluetooth, but not send files, yet on an alternative machine I could do both. They were running different bluetooth dongles and thus settings and drivers.

XDA exec and Mac

Hey people,
I have a XDA exec and I am just wonering if anyone knows any (preferably free) programs that allows me to connect my XDA with my Mac mini. I cant seem to use the bluetooth to send thing over (all the time it just says decive is not compatible with this file or somthing.
Anyone help? Thanks.
No activeSync as of yet, sorry.
There is software available but it isnt free.
Ignore the file incompatible message and click on send anyway. It's pure nonsense. The universal will download it anyway.
i think you might as well get a SD Crad reader to transfer file.
i use USB SD card reader tranfer file from my powerbook to my dopod 900 if i have 2 or more file to send it
Yes I already hd an SD card in there, but not a card reader.
When I try to send somthing to it via bluetooth, it just says "device does not have nessesery services" and fails to send? Also, when I look under paired devices, I look under say my nokia 6680, and it says:
Device Services: SDP Server, Hands-Free Audio Gateway, Headset Audio Gateway, OBEX File Transfer, SyncMLClient, Nokia OBEX PC Suite Services, OBEX Object Push, Dial-Up Networking, Imaging
When I look under my XDA exec, it only says:
Device Services: Service Discovery, Voice Gateway, Voice Gateway, Dial-up Networking
in yr mac under yr System Preferences bluetooth.
have u tried to delete yr xda exec pairing
and pair it again??
after yr pairing with yr exec try to send it again.
hope its work.if it cant work pls let me knw i will check it out with my friend.
Keep an eye on this site too - they say they are working on WM5 support at the moment.
I used it for my ipaq and it worked really well - will probably get the new version when they have syncing sorted for WM5 too
http://www.pocketmac.net
Cheers,
Smiffy.
I have tried pairing it and unpairing it several times but to no avail.
I also saw that, and when it becomes available for WM 05, I will probably buy it.
my dopod wm5 work together with my powerbook well.
Mac os X and jasjar
Hi chaslam,
To get it working you need to change a registry setting...See below:
To change the ability to receive files via Bluetooth (OBEX)
The setting is at 'HKEY_LOCAL_MACHINE\Software\Microsoft\Obex'
The 'IsEnabled' DWORD value should be set to '1' to enable OBEX and '0' to disable OBEX.
For example, to enable the ability to receive fles via Bluetooth
HKEY_LOCAL_MACHINE\Software\Microsoft\Obex\IsEnabled = 1
You can then send via bluetooth...(you get a message saying not supported, but it will send, files appear in my documents folder)
Regards
hippo
Sorry but I dont understand that at all lol. Where do I type that in?
bluetooth sending
no problem, I've been there and still am sometimes! you need to edit a registry setting. To do that you can use some software installed to your jasjar. Do you have a method to get files copied to jasjar at the moment? if so let me know and I'll send you the application and tell you the steps to go through.
ps. what version of Mac OS X are you using?
Sorry I havent got back to you sooner, ive been very busy the last couple of days.
Yes I can do it via a PC I have, but my Mac is the main computer that I use so I would like to transfer things via that.
I would be very greatful if you could send me the program. If you dont want to post it on the forum you could send it to my email if thats ok. Its [email protected] (dont worry about spambots as its my Spam email address what I post on forums).
I am using the latest version of 10.4.3.
Thanks
ok, got the program installed but I am not sure how to acually change it. I get to the opening page and it says:
hkey classes root
hkey current user
hkey local machine
hkey user
When I click on on of these it does nothing. Just lets me change what it says. I cant find the obex thing and all of that.
Sorry if I have being stupid, but could somone help me on what to do from here?
Ok been looking around the forum and found a much simpler and safer way to do this.
Just go to settings > Connections > Beam > Accept all incoming Files
Much simpler and safer, and it works!
Thanks everyone for your help.
bluetooth
That's Great - I should have checked the easy option first!
Hmmm I tried this lastnight and I have "receiving all incoming beams" enabled and I couldnt BT any files over.
Are you sure you didnt use IR?
Try re pairing your exec and see if it works. Worked fine with me.
Oh and IR is the little infared box on the phone. Completely different from bluetooth.
Got it working - Shoulda tried re-pairing really!
Cheers Chaslam
On the subject of syncing data from your Universal to a Mac.. there are two utilities that are due to be updated to support WM5 soon and they are
PocketMac
&
Missing Sync
These are the only apps that will sync directly to a mac as far as I know... unless anyone knows better??? please let us know :lol:

Bluetooth trouble

Hello,
I have been able to send easily via bluetooth, however i am having problems sending.
I have made partnerships, set myself as discoverable, turned bluetooth on (of course), used pass keys and friends phones says 'connection failed'
Any ideas? (O2 Exec)
Sama problem here
bye
nicoska
I have also had similar problems and found that not all phones, even if blue tooth enabled, are send receive enabled eg my my wifes samsung phone can send to me, but my jasjar has difficulty sending to her....
The friends phone would need to have switched on the "accept incoming beams" also setting, which isnt necessarily part of the partnership setting, but in the bluetooth settings itself as this enables OBEX as compared to say activesync, or headset features to allow file trfr's.
There is sometimes and OBEX setting somewhere that switches the file trfr setting on or off. I assume that you have done the obvious "accept all incoming beams" on your phone... not that you are accepting but sending.
Hi
Go to Settings,connections,then select Beams,check the box for Allow all incoming beams...
i did it but having the same problem. I'm using a JasJar.
bye
nicoska
I am too using Jasjar and i am able to do so...pls check yr settings again
I'm using Dopod 900 and having the same problem too...
I'm using SPV M5000 French and having the same problem too...
i have an m5000. With the Resco-Explorer i can send files via Bluetooth ti my ipaq h 4150, but i can't send files from the ipaq to the htc universal....
I had the same problem, not being able to send files to others. I was using Resco File Explorer, then I tried the built in File Explorer and it worked like a dream.
hdubli said:
I am too using Jasjar and i am able to do so...pls check yr settings again
Click to expand...
Click to collapse
Man i checked again my settings and all is correct, but have the same problem, as many others users here :-(
bye
nicoska
I can't receive anything from anyone via Bluetooth, I think it might be something to do with OBEX (whatever that might be :roll: ) does anyone know how to fix this?
RE
coercri
Quote
"I had the same problem, not being able to send files to others. I was using Resco File Explorer, then I tried the built in File Explorer and it worked like a dream"
Can the default File Explorer send file using bluetooth? How?
RE
OK,
Finally, I manged to send/receive file to and from my QTEK 9000 and my notebook using bluetooth and default File Explorer
Did you change any settings?
RE
On my PPC side I turned on "Receive all incoming beams". My PPC only shows Incoming Port (COM0)
What I did for my notebook is to add Incoming (COM5) and Outgoing (COM7) COM Ports
For sending file from my notebook to my PPC I just select "Send a File" and then select the file to be sent
For sending a file from my PPC to my notebook I select "Receive a File" from my notebook and then selct the file to send from my PPC and send over using bluetooth
i couldnt get my pro to recieve a file via bt...had to download it via the web
RE
Tested sending/receiving file with my QTEK 9000 and SE 700i handphone
No problem at all
Mine just won't receive anything from anyone :x
RE
trapper
Have you checked to make sure that your PPC and the sender's device must be visible to one another ie. they must be make discoverable?
:roll:

How to send files via Bluetooth?

I have paired my QTek 9100 with my Mac and other devices, but how the heck do I send a file over to another device? I can receive files from these devices, but I find no option anywhere to send via bluetooth. I have created outgoing and ingoing ports too, but no new menu options appear on the file manager! How is this supposed to work on Windows Mobile 5 AKU2?
Follow the option to BEAM via Infrared, while it's searching it'll search bluetooth as well.

Where are all the bluetooth functions (esp. File Transfer)?

The only bluetooth functions I get on my MDA Pro are Headset and Serial Port. I'm desperate for File Transfer... does anyone know how to get it? Thanks!
They are there, just not visible..
Try sending a file to your Universal through BT, and it shall recieve it..
Make sure that the beam settings are "Accept all inncoming"
if you use the inbuilt file explorer on any file, you can press and hold, then select beam file. if bluetooth is on, it will:
1. search the infra red port
2. Search all surrounding devices with bluetooth on, and discoverable.
then you can just select where you want it to go.
Transfer files using bluetooth
Does anyone know how I could transfer a file from my Qtek 9000 to my Nokia N70 (Symbian OS) using BLUETOOTH. When I pair the two I get "Dialup networking” only I cannot find a way of transferring files from one device to the other. Please include step by step instructions if you know how.
Thanks
Re: Transfer files using bluetooth
avensis said:
Does anyone know how I could transfer a file from my Qtek 9000 to my Nokia N70 (Symbian OS) using BLUETOOTH. When I pair the two I get "Dialup networking” only I cannot find a way of transferring files from one device to the other. Please include step by step instructions if you know how.
Thanks
Click to expand...
Click to collapse
1. Enable Bluetooth on both devices;
2. Open File Explorer, go to the desired file, hold the stylus down (like right click on a PC) and choose "Beam File" (this works with Bluetooth as well as Infrared)
3. Choose Nokia N70 or its assigned device name when you see it on the list
File sent as a message not as a files transfer
Yes thanks i tried doing what you suggested, but it sent the file from the Qtek 9000 to the N70 -> recieved it as a message and i could not save the actual file anywhere on t he N70?
Well, what does the message look like? What type of file are you trying to transfer? I would expect you be able to save an attachment or something similar. I'm afraid I'm not familiar with the Symbian OS.
Bonzo said:
They are there, just not visible..
Try sending a file to your Universal through BT, and it shall recieve it..
Make sure that the beam settings are "Accept all inncoming"
Click to expand...
Click to collapse
Either I'm doing something stupid here, but.. if I send a file from my desktop to my MDA Pro (BT enabled, accept incoming beams enabled) I just get a message saying 'ftp service not found on target device'
If I explore available services I can see DUN and Voice Gateway... am I missing something?
Re: File sent as a message not as a files transfer
avensis said:
Yes thanks i tried doing what you suggested, but it sent the file from the Qtek 9000 to the N70 -> recieved it as a message and i could not save the actual file anywhere on t he N70?
Click to expand...
Click to collapse
Im very familiar with symbian OS but new with PPCs so should be able to help!
Install a file explorer such as fexplorer onto your n70. Fexplorer on the root page has a mail option, and when you enter it, you can see all the files recieved via btooth/mms. Copy the file and paste it to your desired location using fexplorer. Alternatively, if the file explorer you use doesn't have the "mail" option on the home of the sw, visit x:/system/mail (x= c or e depending on where messages are stored) and browse throygh the folders until you find the attachment and paste it to where you want.
Thanks
Thanks very much, i did what you said, but the mail opton was not there, instead i found the Inbox directory and there was what i was looking for, so thanks again...
I don't know if anyone remembers the old widcomm bt versions on blueangel, but u used to be able to browse other devices and stuff, well, I'd like to be able to do this, I miss this function....
is there 3rd party software that can do this?
I don't know if anyone remembers the old widcomm bt versions on blueangel, but u used to be able to browse other devices and stuff, well, I'd like to be able to do this, I miss this function....
is there 3rd party software that can do this?
joey jojo said:
I don't know if anyone remembers the old widcomm bt versions on blueangel, but u used to be able to browse other devices and stuff, well, I'd like to be able to do this, I miss this function....
is there 3rd party software that can do this?
Click to expand...
Click to collapse
something like this? http://www.silentservices.de/btCrawler.html
Browse and BT transfer data from deviceA to deviceB
I check BtCrawler it does not let you transfer files between device, what i am looking for is something like a file explorer where (once two devices are connected via BT) then one can copy files (using a fileexplorer type of interface from one location in device A to another location in Device B. Veyr easy stuff really but cannot do it anymore in Qtek 9000 WM5, whereas in my Blueangel WM2003 i used to have that exact functionlity, and i used to do it by transfering files from my Cellular camera to my PDA.
Re: Browse and BT transfer data from deviceA to deviceB
avensis said:
...what i am looking for is something like a file explorer ...
Click to expand...
Click to collapse
OK, got you this time. WM5 only supports Obex-Push (trabsfering V-Cards and stuff). It currently does not support Obex-FTP which is exactly what you are looking for. Maybe some future updates from M$ will add this functionality, so I hope...
cheers
Thanks, but if you find any software that provided the " Obex-FTP" on the WM5 PDA could you please send me a message.
isnt it possible that we can update the bluetooth stack to the widcomm one?
daven said:
isnt it possible that we can update the bluetooth stack to the widcomm one?
Click to expand...
Click to collapse
I'd like to know if this is possible.

Categories

Resources