Ok now Wm6 is really cool , fast and stable .. BUT WTF happened to my device ? It suddenly resetted itself and the Funny thing is that it wont accept my Screen lock PASSWORD !!! it's the 3rd time it HAPPENS. i know that there are threads talking about this Problem but none has provided a real solution. HOW CAN I UNLOCK THE SCREEN WITHOUT LOSING everything installed on the device ? Please Hint me . Many thanks
Karim.
If you search this forum you will find the thread about this problem.
Until now there is no solution but hard-reset it.
I would like to know if there is any alternative software to LOCK the PDA because i dont feel like using the WM6 one again , 4 Hard reset are enough for me. Any software Guys ? Thankss.
Related
Hi all,
first off all i'd like to say Hi to everyone as im new here.
Also id like to thank everyone for readingmy problems
Any way i purchased an XDA II about a Week ago from Ebay its really my fault as in the item description it said there was a problem with the phone it wont start as its locked.
The phone goes to a Blue screen after you ON it and do the screen configiration etc
The blue screen has Cognito on it saying 'Warning this Devcie is Locked'
then under it:
'If you are installing from the MMC card please wait.
Otherwise, either insert the MMC card and do a cold boot, or contact Cognito to unlock the device.
Im not sure what this means and if i leave the phone for a while or type it from it takes me to a password screen in white with the keyboard on it.
----
Im not sure what to do if you can help me you will save me alot of money otherwise do i just chuck the phone away also
ive tried a Hard Reset by clicking the POWER BUTTON, RESET KET.
nothing happens just the phone loads up and makes me Calibrate the screen.
Ive tried this process while also pressing the D-PAD i get a screen with Serial with V1.06 i think at the bottom
i dont really know how i can know if its Hard resetted.
So please peolple take a Minute to help me thanks alot.
may work not too sure though
hey man i feel sorry for you
okay wot u do is download the o2 rom for the device because u sed it is a xda2 so download and install that. this will do a comlpete rest not like hard reset it will deleted absolutly everything on the xda2 and then install indows 2003 back onto it it will be like getting a new fone. try it i hope it works for u
HI
Thank you so much.
For your Advice and Time.
can you confirm this will remove that Lock thing ?
Also do you know where i can download Win2003 for XDA II o2 UK
Thank again
Hi,
I flashed the himalaya M1000 with WM2003se upgrade. but still could not remove the Cognito (shame).
please if somebody can help that would b nice
Should do. I've done the 1.72 update on it based on the ROM from this site and all is good.
Dear XDA Forum members,
Need you help . I purchased a new Imate JASJAM after few days of using the PPC , i noticed a strange thing happening on my phone. All the application just closes automatically . when i open any apps it just closes within seconds , i am just able to receive calls and no other functions work . I took it to the imate service center couple of times now but after they handed over the phone to me , the problem persists after using the phone for 2 days . It seems very strange to me . Request your help/suggestion and solution to control this problem so that i can use the PPC again without any problems
What did the service center tell you was wrong with it?
And have you tried just doing a system restore?
Hi,
The service center restored my mobile device from WM6 to WM5 as it was not compatible, earlier they thought it was an software issue and then the hard ware was also checked but to no avail. after sometime of working on the ppc , the programs just closes immediately within seconds of opening.
It should run WM6 just fine, they also have a wm6 rom for your device so that should tell you somthing.
sounds like they didnt know what was wrong with it.
Tell them your unhappy with it and you want a replacment, thats if u havent unlocked it>
Or maybe someone else here willl reply with a better solution.
To me though it sounds faulty
Seems your not the only one with issues with this phone
did a quick google search
Well the phone is not under any warranty , checked lots of links in google but never helped . Just hopes somebody comes out with a solution . Already have paid enough for service of the phone at the service center .....pls help
girishkumar.kp said:
Well the phone is not under any warranty , checked lots of links in google but never helped . Just hopes somebody comes out with a solution . Already have paid enough for service of the phone at the service center .....pls help
Click to expand...
Click to collapse
If you got the phone from a legit source it should have had some type of warrenty at one time. And if so was it in for repairs during that period. Just asking cuz thats your proof that the problem was never resolved and they should still provided you with a replacement.I could be wrong but Id look into it more.
anyways hope you get this resolved...Good luck
girishkumar.kp said:
Well the phone is not under any warranty , checked lots of links in google but never helped . Just hopes somebody comes out with a solution . Already have paid enough for service of the phone at the service center .....pls help
Click to expand...
Click to collapse
Ok, real long shot. We have several Jasjams. One of our Jasjams had an issue with a broken OK button (near the scroller). The button just stopped working altogether. Is it possible that yours has lost it's click and it keeps pressing ok, shutting the programs? If that's the case, see if it's possible to reset the function for the broken button in the settings.
Hi there, what ver of WM6 you upgraded to? the ok button theory seems true, but just tell me what WM6 did u use? did u try 1 Version only or you tried many?
if you think this is a OS problem, try upgrading to Schap's 4.22 or TNT.SE, these are the best two versions ever, i am using Schap's on my JASJAM and its just perferct wihtout flaws, try installing it and see what happens with you.
jasjam warranty
if you bought it from a legit place and haven't put any cooked roms on you should be able to get it replaced if it goes bung in the first month. the store should replace with no questions asked if there is a problem that they cant resolve..... imate also has a years warranty on new phones so you should be able to send to them and be fixed AT NO COST TO YOU (excluding postage).
suggest taking back and if they say theres no problem test b4 taking out of the shop. all the help i can give, Cheers.
I updated first time that was fine ..
Again i updated with wrong os ..may i think..
Now not switch on my wizard 200 ..
Here i search for reparing this problem..
Then i got jtag ,,that can help..
But i hav no software for doing this ...
I need some ideas ..which software use for direct flashing the rom..?
...,
,
.
.
..
.. Help...........thanks in advance
Pleas...need help ..
Not switch on
possible resuscitation for you wiz 200
I had some bad flashes with my wiz 200 too, a K-jam to be exact
my best guess is dig a bit deeper in the wizard forum
and you find out that there ways to revive it.
1 thing you could try is,
remove your SD-card
get a very bright spot-light so you can see if you phone is working, only the backlight is not activated
press and hold the camera button and press power on, release the power button and you should get a 3 color bar screen.
If it doesn't, search for the MMC restore trick somewhere on this forum
please let us if it worked
Atleast the MMC trick saved my tiny behind
I wish i could search it for you, but i can't open multiple tabs yet on my mobile
ok dear i try this method..if get it ...
it will be the best and best work in my life....
i keep try to unbrick my wizard 200 ...
i only stop searching ...after i die....
i work hard for it...lets wait...i just checking..
well the good news is you could get a broken screen wizard for pretty cheap.
HI DEAR
After all i followed...but not switch on yet..
Wat is the next procedure for unbrick my wizard 200... Help need
no bootloader..no led..after full charge..also..help need
i have solution man
hey u need answer to this question contact me personaly at [email protected] and i can give u the answer.come at chat i will make your wizard live alive man.message me the time to chat
help
no one is here..
can u help for jtag on wizard200
can i get jtag for wiza200
ca i get gtag software ..?
anyone ..pls i want to be unbrick my wiza200...
Hi guys .... I got a problem with my htc touch p3450 elf. The problem with my device is freezing all the time i have tried everything like........flashing several type of roms changing radio and (ipl-spl) but nothing works same problem freezing and shuts down....im really worried about this i dont know whats the matter with my device....is there any buddy can tell me regarding this problem that what is wrong with my device .....i,ll be really thanxfull to him.
A similar kind of problem happend to me also but i dont know if the issue is the same... i uninstalled all the programs ive installed in it.. i think elf and elfin doesnt take too many software. try doing a hard reset if the problem still persists. Back up all ur data's before that.
Hi, this is my first post here I didn't have time (and will) to read the rules and everything, so I just hope that this is the right forum for this kind of request.
Since you guys have showed up to be people with nice expertises, I request your help to avoid going to any support center and spend money for something that by lucky means, may be fixed at home
The problem is that when doing some operations, the device freezes and no action can be done, whatever button I press or wherever I click with the stylo.
The only thing that can be done to restore for a while the correct functionality of the device is to remove and reinsert the battery.
I don't know exactly when this problem started to show up, because the device isn't mine, so I don't even know what can be the possible causes.
I have also to say that this problem occurred few times at the beginning, but now it happens more and more often making it impossible the use of the phone. Sometimes I even can't turn it on.
I've tried to substitute the battery, but with all of them, the problem remains.
After that I've tried the software reset, didn't solve anything.
The hardware reset didn't solve anything either.
I thought then that maybe the operating system was going nuts, so I tried to flash the device putting WM6.1 Stratos FE+ on it (of course, following the guide and without doing anything wrong), but nothing changed.
I don't know what else it could be, so before throwing this piece of garbage in the bin I ask here for the last sentence, if you can help me.
I have some pictures attached of the phone freezing and the screen tearing up (looks almost like The Matrix movie).
Thanks in advance.
Hello,
From my experience, i think your problem is due to CPU overheating.
There are similar threads on this forum, regarding your problem.
I advice you to check those threads.
have anyone fix that problem? i have the same problem, but 3months before i put a rubber between the cpu and the metal cover and it worked, but now again and the rubber dont help anymore
I didn't do anything still on my phone, I am waiting that somebody gives us an answer
The only thing I did was to reduce the backlight brightness, according to the problem this guy has on this other thread -> hxxp://forum.xda-developers.com/showthread.php?t=596927
But the only thing I've got after this is that the phone lasts a bit longer before crashing
trinity
also here.
somethimes I must leave it without battery an hour or so to power up again.
nothing help. reinstal everything twice. even in stand by it freeze...
it's a wtf problem .....
also I'm very curios for some remedy. I incline to believe it's a hardware problem .....
please if anyone know how to fix that problem then say it here please
I have same model and same problem, When i press and hold central navigation key and power key it power on,and it work,few minutes....
On Monday I will overheat cpu and you hear the results ... hopefully positive
yes, please let us know. And what you mean overheat the cpu? How?
I want to fix mine too...
Thanks !!
Dear friends, problem solved ... overheating of components on PCB...
for all the info: [email protected]
really? hey what did you do ? please tell us.....
THANK YOU!!!
I have exactly the same problem with my htc can any buddy help or any sujjestion in this regard.
I have the same problem however
First, I flash back to ship ROM WM5
Second, I try to increase CPU speed up to 420 Mhz by using Pocket Hack Master
http://www.wizcode.com/articles/comments/pocket-hack-master-speed-configuration-guide/
Everything is testing, if you have your experience pls share
File as attached:
1. Install *.CAB
2. Copy patch file into folder
I join with the same problem.
Nobody has an idea how to fix that error?
@ivanish: can u please share your solution!!
how u solved that freezing problem ? plz can u share ?
thinh30 its overheating problem of cpu as i experiance this freezing problem when media player is in use for long time or during usb connection with pc
i think cpu speed should be lowered to avoid overheating and not increased
it's not that , the screen connector is destroyed , i have the same problem , it's not CPU , use search , there were solved this problem few years ago