Database Users

radio keeps searching...dosen't work ...help needed..

hey ppl, my friend had bought a universal but its radio seems weired.
it keeps searching for a signal.. but dosent get anything..
a test i did :
i kept my uni under a computer CRT monitor and it disturbed the CRT monitor ..even whlie searching for a signal..(as GSM signal usually does)
His uni dosen't even disturb the computer monitor.what is it ? faulty radio or ROM ?..I've flashed numerous radio ROMS..1.09 1.15 ...ran the unlocker twice...both with successs.. ran the simunlock tool on the 1.15 with success...but no effect..
its still searching... the sim works on my phone so its not faulty..
any ideas ?
its an orange SPV m5000
I flashed it with
with 2.50.00 WWE WM5 ROM (from xda-developers a while back..i don't know whos was it(maybe helmi)
BootLoader 1.01
Radio 1.15.00
edit :
using mtty i just did the task 55aa thingy and it formatted the system
then i did the rtask 0 thingy to reset the radio..
then flashed it with thingonaspring wm6 rom with 1.15.00 radio ..successfully i may add.
still searching ... searching...and on manual network mode it's just stuck on the dialogue which says 'getting network settings' or something..
i'm beginning to think hardware of radio is damaged ..any ideas..please help ..

XDA II mini showing "No Service"

Hi,
I'm facing a problem with my customer O2 phone. It's showing "No Service with "!" mark. I have upgraded everything .. but nothing changes ..
It's a hardware problem or Software problem ??
Thank You

ive got the same problem.... can anyone help please.

You need to reflash using the 'radio ROM.nbf' file.

My magician's radio, stops working after the unit reboots after doing a ROM update. The radio works immediately after the inital splash screen (before the extended rom autorun). After this, the radio doesn't work.
If I skip the extended ROM instal, by rebooting the device prematurely, the radio still doesn't work.
I've tried many different ROM numbers. I've even downgraded to the stock ones that came with the unit.
Any suggestions?
Hint: My radio only works immediately after a hard reset, but not after rebooting using the extended ROM (customization). (aborting the customization, the radio doesn't work anyway).

it could be barred IMEI

What now works for me, is enabling, then disabling 'Flight-mode" on the phone.

no service... R:none G:none

OK heres my situation:
i upgraded from the stock o2 wm2003 to wm6 using the wiki ROM:
Helmi Windows Mobile 6 Profesional R0
CE OS 5.2.1620 (Build 18125.0.4.2)
now on bootup it says
R:none
G:none
D:5.60.00 WE
It boots up fine but....
i cant get any reception.- just says "no service"
i have also tried disabling and re-enabling "Phone" in com manager
Yes, i have done a soft reset, hard reset and ive tried XPLODE wm6.5 and my current wm6 ROM.
XDA unlock all reported a successful unlock.
HELP!!!
OK, i did the thing in the ROM post said:
"R None if you take out battery and turn it on without push the reset button twice.
SDK?"
and it works now but when i turn it on i have to press the reset button twice every time
can someone help?

first of all you must unlock sim under WM 2003, then remove the extrom of 2003 to gain adidional 16 mb of storage (resize DOC), then you must upgrade to radio version 1.15 and then you must try any WM5, 6, 6.1, 6.5 rom
so now flash your shipped rom, you may find preferred rom for your operator in my signature, then start everything from the beginning

ok, it has kinda settled down now, working as normal.
I have "unlock sim under WM 2003, then remove the extrom of 2003 to gain adidional 16 mb of storage (resize DOC)"
If i wanted to upgrade my radio version would i have to flash the ROM again?

no you can flash radio rom only without the OS

Jejeje
Hey Xplode i never was able to see that tools like unlock extrom and repart DOC works on my BA... it always shows an error! when i execute the unhide hide repart etc etc.. so I upgrade even tought jajaja.

they only work on WM 2003

xplode said:
they only work on WM 2003
Click to expand...
Click to collapse
are you sure xplode, cause i unlock my phone using the tools from the BA wiki and im using wm6.5.

ok,
i upgraded my radio to 1.15.....
but i still got the problem

none
I get this on my wm6.1 but normally gets sorted after a soft reset
HMM!!!!

Same problem, after updating from stock WM2003 to WM6.1PRO all steps done like the wiki steps except the ExtRom step, couldnt get the unhide, unlock program to run (missing file or libraries error), so i flashed sun's WM6.1PRO without the extra storage, now when i change the battery i get the NO radio bootloader, still im able to fix it by doing a soft reset, but the strangest thing is that im not able to use the wifi :/. So the thing is, when i turn on without the radio i can use the wifi, but no the phone(airplane mode), and when i do a soft reset, the radio shows and i can use the phone but the wifi doesnt turn on at all!. Any help please, dont make me choose betwen my phone and my wifi
PD: is not only the radio missing the i change the battery, also R:none G:none
I have a Qtek9090

very odd ,i can use my wifi when the phone is on.
But i went from wm2003 to wm6.5 to wm6
wierd....

so, is there a solution? I've got the same problem

Ops! Solved. Do a soft reset via the button.
(I always do a softreset via unlocking the battery and locking it again)

Every one here should know that there is no WM 6 for BlueAngel by microsoft. it is ported on BA by helmi_c and that >> R none and G none << Bug is in WM 6 from very first day. SO Whenever u pull the battery out u need to SOFT Reset the device after putting the battery on phone.(u need to wait to start the phone to reset, just put the battery and insert the stylus at reset point.)

there is no point discussing about this anymore. thread should be closed.

i have the solution about this problem, im recovery from it.
first of all, downgrade ur ba tu ship rom, and go back to upgrade 6,5 rom, after finis doit "WM5" hardreset.... search the way in wiki.
wala........its done and run normal r;none g;none not see again. have try it

This is an old problem... Rnone Gnone
solved by sticking your soft reset button after changing battery or a hard reset.
The Wifi-Phone problem is solved by buying a new battery. The Wifi module wont fireup because of the lack in power draw since the phone is using much of it.
Buying a new battery solves plenty of problem. even OS speedup because it solves the lag the "modules" (e.g camera/lan/phone/mmc) detection gives while in bootup or execution.
If you still have problems. We can always point to the wiki.
Have a nice day!
-SS-

SPV acting strangely

My SPV3100 had the No GSM message and got stuck on the Windows Mobile screen a few weeks ago. Tried HR, levaing the battery out etc etc etc but nothing worked.
I was ready to chuck it away, but after about a month of reading as much as I could about the Hermes on this forum I managed to get the phone working again by loading a different radio.
I then loaded HardSPL v7, and flashed the rom/radio using the current version on the Orange UK website.
It worked fine for a while, but now some strange things are happening;
- Call doesn't appear to end when I press the red hang-up button (although the call is actually disconnected)
- Phone freezes and buttons/touch screen will not respond
- Occasionally hangs on the Windows Mobile screen
- Occasionally get No GSM message
- Occasionally get Radio: None, GSM: None messages
- Outgoing call fails on first attempt, then phone loses network, searches, finds it and then call connects (in an area where I know reception is usually great)
- Battery dies in about 12hrs, even when sitting in standy and not being used.
These things happen at different times and independently of each other
Current stats of the phone:
IPL-1.04
SPL-2.10.Olipro
ROM version 2.11.61.3
Radio Version 1.38.00.01
Protocol version 32.71.7020.12H
Apart from updating the rom, I have also tried HR and the Activesync tip
Is there a better rom/radio version that I could try (I'm on Orange UK) or is this sounding more like a hardware issue?
Thanks in advance

If no-one can help with the problems i have listed, then could someone point me in the right direction of a decent radio/rom version?
Thanks

update with an official orange rom, then flash any cooked rom. I had a similar problem on one of my hermes and found if you use the official upgrade to flash first it solves the problem also state what the rom was that you flashed

Hi,
I did flash the official Orange rom already (downloaded it from the Orange website), and am having the problems listed
Current stats of the phone:
IPL-1.04
SPL-2.10.Olipro
ROM version 2.11.61.3
Radio Version 1.38.00.01
Protocol version 32.71.7020.12H
Do you think it didn't flash properly (bad sectors etc)?

Only way to find out is to check.....
If you're not sure, re-install the ROM.

Ipaq 614c wifi missing

Hello all.
I have problem with WIFI.
When I look into SETTINGS/CONNECTIONS/WIRELESS MANAGER, I´m missing WIFI there => Only Bluetooth and Phone is shown.
I try reflash radio (0.89), original ROM, some ROMs from KEYX but nothing happened
After reset to factory settings still nothing.
Could you please help me with this?
Thanks in advance

This should correct the missing WiFi issue: http://forum.xda-developers.com/showpost.php?p=3791117&postcount=191

Hi Kiemlo
Unfortunately the key is 1 already
I try change key to 0 but results is wifi missing still
Any idea ?
Thx

what happened to cause it to be missing?
did you flash the phone witha new ROM? install a program recently?
Have yuo tried doing a FULL backup then a hard reset?

Yes I think that wifi just disappear after some ROM flashing.
But I try to flash all ROMs which I have before and WIFI not appear again in no one ROM.
I try hard reset without backup(by the menu factory reset and by voice comm+power+reset) with same result - wifi missing.

Hi,
My current rom removes wifi from the list when its connected to usb or activesync. When I unplug it automatically goes back to the state it was before, either powered off or on_and_connected!
Also, use radio rom 0.89, with 0.88 and 6.5 i had no wifi, it was present in the list but could not see any SSID's.
Cheers,
Balint

Yes I know wifi can´t activate (grey text) when its plugged to USB.
But in my case don´t matter if its plugged or unplugged - WIFI option is missing(not only with grey text)
radio is 0.89 and OS is 6.5 so there is something else broken

Not that this would help much, but I had a similar issue with my 914c while using HP's default OEM 6.1 software. The Wi-Fi used to vanish from the Comm. Manager every so often. For what it's worth, a couple of soft-resets would fix the problem sooner or later (for me, anyway). I'm using Montecristo's 6.5 now and haven't had the problem since.

Yea friend soft resets - I did it thousand-times, even hard resets 1000x not help...

bluejay23 said:
Yea friend soft resets - I did it thousand-times, even hard resets 1000x not help...
Click to expand...
Click to collapse
I usually run into the same problem after ROM updates. Switch it off, remove the battery for a minute, insert the battery back in and hard reset fixes it always.
Regards

Flash original ROM with downgrading radio to 0.88

Sergious: unfortunately - this wouldn´t help.
even if yes, I can´t stand original ROM
I´m going to try Montecristo ROM
Best regards

Not working WiFi is a radio problem, not ROM. Link that i gave will downgrade your radio to 0.88, then you can flash any rom
PS. Montecristo ROM ?? It is for 914...

oh I miss that so next flashing will be with keyx roms still
I will try some flash and resets by the night ...
what goes around comes around

Hello everyone who can helps with me
I have some more informations.
After flash original HP ROM phone always show message problem with DEVICE.EXE until I disable sending report.
When i flash some KEYX 6,5 ROM this message doesn´t appear but when I look onto task manager DEVICE.EXE is mostly of the time under 90% of CPU.
With this battery is drain too quickly too.
This is may be the bad trick :/
Somebody knows it ?
THX
p.s. wifi still missing

bluejay23 said:
Hello all.
I have problem with WIFI.
When I look into SETTINGS/CONNECTIONS/WIRELESS MANAGER, I´m missing WIFI there => Only Bluetooth and Phone is shown.
I try reflash radio (0.89), original ROM, some ROMs from KEYX but nothing happened
After reset to factory settings still nothing.
Could you please help me with this?
Thanks in advance
Click to expand...
Click to collapse
I had the same problem with 23001 Beta 13.2 WWE, the WiFi was initially disappear from my Wireless Manager, then i change this : my network card connects to - The Internet (default is work), and the WiFi is now again show in Wireless Manager, but can not switch on, so after soft reset it works ok...

Zemun_PFC : thanks you for your advice - its so close to solve my issue.
I did what you say and
1) after soft restart BLUE LED blinking(means some wireless active - BT was off before restart so I suggest WIFI will be working) BUT
2) when i go to SETTINGS/CONNECTIONS/COMM MANNAGER and click on wifi -> waiting icon then nothing happened - STILL only TURN ON - BUT SHOULD BE ON already => so on/off trigger doesnt work
3!!) when I´m in COMM MANAGER and click on SETTINGS in bottom right corner I see WIRELESS LAN - this not happened before!!
4 when I´m click on it it show only BLUETOOTH and PHONE settings :/
You helped me a few with it
I must solve it

bluejay23 said:
Hello everyone who can helps with me
I have some more informations.
After flash original HP ROM phone always show message problem with DEVICE.EXE until I disable sending report.
When i flash some KEYX 6,5 ROM this message doesn´t appear but when I look onto task manager DEVICE.EXE is mostly of the time under 90% of CPU.
With this battery is drain too quickly too.
This is may be the bad trick :/
Somebody knows it ?
THX
p.s. wifi still missing
Click to expand...
Click to collapse
some of my roms (older version) had a issue when you use a2dp and turn off bt. Restart then device.exe will take most of the cpu

Keyx : yes you are right - I flash another one from you, now is device.exe issue cleared.