Database Users

Wizard is dead ! help!

Hello everybody.
After i flashed the Radio ROM 2.69.11 to my Wizard..
Its broken, freezes on bootup and wont run.
the screen shows the following:
IPL: 0.3
SPL 1.03
OS 1.3.1.13
--------------------
How do i fix this problem?
Thanks
//Daniel ..

IPL 0.3? What did you loaded into it...
The Radio ROM may be too new for your IPL version...
If warranty is not important, Go to the Wizard Upgrade section and read the stickies, use Button's 1.05 ROM to unlock, then upgrade a newer IPL and SPL.

I see i made a mistake..
its ipl 1.3 sorry..
How i installl Buttons. if i cant use ActiveSync?
//daniel

latii said:
I see i made a mistake..
its ipl 1.3 sorry..
How i installl Buttons. if i cant use ActiveSync?
//daniel
Click to expand...
Click to collapse
Put it into bootloader, then flash from there.

Bootloader is.. Power + camera button.. right?
I got red/green/blue/ screen now.. with IPL 1.03 and SPL 1.03..
Connection USB and start the .exe file? (from buttons).
//Daniel

Wizard Works Again!!
Big Thankss To Alll !
Really Appriciate..
//daniel

Thanks POF:How i Upgraded my DOPOD C800 with WM6

HI,
Thanks for POF and other forum members.
I upgraded my DOPOD C800 with WM6. Used POF HARD-SPL and Official HTC P4350 ROM.
Thanks
Jose

Can you mention the ipl and spl of your c800 before you had gone about with Hard-spl?

murali509 said:
Can you mention the ipl and spl of your c800 before you had gone about with Hard-spl?
Click to expand...
Click to collapse
Hi mine is- before upgrade
SPL 1.09.0001
IPL 1.09.0001
ROM 1.7.707.3 WWE
ROM Date 11/01/06
Radio 2.69.90
protocol 4.1.13.30
Ext rom 1.7.707.106
OS 1.7.0.0

I also have a Dopod C800 with the same ipl & spl. Can you direct me to the POF Hard-Spl files that you used? I have the HTC P4350 WWE WM6 RUU. Any help is greatly appreciated...scared to death I'll brick the phone!

How i upgraded My DOPOD C800
STEP I:
Download the following files
1) USPL --- Flah centre.rar file from
http://www.mediafire.com/?axtm5qlmbli
2) Official RUU -HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe
3) Make sure ur computer is always power on...not hibernated
Step II:
1) Create 2 folders eg:flash and rom.
2) Extract flash centre.rar in flash folder
3) Extract HTC_P4350.... ship.exe in rom folder .
( Use winrar or simply double click the file. It will start the upgrade window ,click next, then hold.Go to the temp folder, u will find all the extracted content there.Copy all the content to the new rom folder. After that cancel the upgrade window.)
4)After extracting the content in the rom folder ,*****delete the SPL.nbh file ****
Step III:
Connect your phone to the computer, make sure activesync is enabled (green icon)
Step IV
1)Open the flash folder --- follow the read me file in this folder
ie
2)Run herald-uspl.exe on your computer and follow the instructions on screen.
- it will run in command window and ask u to enter the values..follow the screen
After 2/3 steps if will ask u to chk the device-- the activesync green icon in ur computer will become grey and the screen of ur mobile will be blank-white.
!!! now u have sucessfully hard spl ur device!!!
**** dont touch or remove the connection or close any program****
3)After this it will start the RUU program ,follow the instruction ,click update ( u wont find any previous ROM installed),it may or will show ERROR [240] : FILE OPEN
clik finish/cancel and exit **this program only**.
4)Now without removing anything open the rom folder and clik the ROMUpdateUtility.exe file and follow the instruction.
thats it. ur mobile will be upgraded. dont get panic...it will take some time and the mobile will be white in colour.
Thanks
Jose

C800 upgrade success
Upgraded Dopod C800 with same IPL/SPL/RADIO parameters as mjose using his directions and it worked like a charm. Am WM6 with no issues now.
Thanks POF and mjose and everyone else on the forum for your help!

WHen using Herald-USPL - it is NOT permanently HARD-SPL!!!!
Please check the SPL now - and report....
if it doesn´t show 4.70.yang - then it is only USPL = temporarly CIDunlocked= NOT HARD-SPL
thx.

How much free memory did you get by upgrading to official HTC WM6? I got only 25mb free with no extended rom install!

C800 USPL vs Hard SPL
Poppamopps, you are quite correct. The update I performed was NOT Hard-SPL. I would prefer Hard-SPL but my understanding is that it should not be used on a device with IPL/SPL below 4.0. I am 1.9 both IPL/SPL.
Is there now a HARD-SPL that is safe to use on the Dopod C800 that is below 4.0 ?

billy-the-t said:
Poppamopps, you are quite correct. The update I performed was NOT Hard-SPL. I would prefer Hard-SPL but my understanding is that it should not be used on a device with IPL/SPL below 4.0. I am 1.9 both IPL/SPL.
Is there now a HARD-SPL that is safe to use on the Dopod C800 that is below 4.0 ?
Click to expand...
Click to collapse
nope. BUT try USP for falshing an official HTC rom with higher SPL and then HArd-SPL....

NICE! I successfully upgraded my C800 to wm6 using mjose instructions. Thanks to mjose and to all those involved.

Thanks to mjose, UPGRADED
Followed exactly what mjose said. Successfully upgraded. Thanks to everybody
Any idea how to install touch flo now?
C800
ROM: 4.17.405.2 WWE

need help please!
tried updating following mjose's listed method exactly, but failed after the screen went blank, and now my c800 seems to be dead (or bricked?!). can't even power on now. is there any way to revive it, or do i now have an expensive doorstop?

longj49 said:
need help please!
tried updating following mjose's listed method exactly, but failed after the screen went blank, and now my c800 seems to be dead (or bricked?!). can't even power on now. is there any way to revive it, or do i now have an expensive doorstop?
Click to expand...
Click to collapse
managed to do a hard reset but failed to restore, the screen now is green in color and showing:
IPL 1.09.0001
SPL 1.09.0001
then it's stuck there unless i remove the battery.
can anyone help please?

longj49 said:
managed to do a hard reset but failed to restore, the screen now is green in color and showing:
IPL 1.09.0001
SPL 1.09.0001
then it's stuck there unless i remove the battery.
can anyone help please?
Click to expand...
Click to collapse
i'm assuming nobody was awake. when you were posting....but i could be wrong.
i have no idea what a green screen means other than it's green hehe... and have never flashed a dopod.. but i'll pretend it's a herald?
can you put it in bootloader mode????
soft reset(put stylus in the hole)... and hold down the camera button..
you should get the tri-color screen..

mv3 said:
i'm assuming nobody was awake. when you were posting....but i could be wrong.
i have no idea what a green screen means other than it's green hehe... and have never flashed a dopod.. but i'll pretend it's a herald?
can you put it in bootloader mode????
soft reset(put stylus in the hole)... and hold down the camera button..
you should get the tri-color screen..
Click to expand...
Click to collapse
hey thanks! yes. i've got the asian herald. i got into bootloader mode as per your suggestion - is that the one with red/green/blue horizontal bands with a thinner white band at the bottom? ok what should i do next?

i was able to run the ROM Update utility after that, but got an error 300. checked the documentation and found out that i used the wrong version for my phone, which was RUU -HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe. would you know which one i should use?

i'm guessing your phone is not an English phone?
you need to find the native RUU for your phone.. Taiwanese Mandarin> HK Traditional? Japanese?.... if you can find it, then put your phone into bootloader and run the RUU file from your pc.
other than that, I don't know if anyone here has access to asian RUU's

doesn't look good, can't seem to find my region's wm6 rom anywhere. even tried to restore using the original wm5 rom from htc website, but still getting error 300. i think running herald-uspl.exe initially could have somehow caused some corruption.
well, i might have to visit dopod's service center soon.
thanks for your help, mv3, greatly appreciated.

did you try looking for official ruu from asia.htc.com
I suggest you load that before going to the repair centre

My Prophet don't start

Hello, I am looking for the solution to the problem of my HTC PROPHET (SPV M600 model) that does not start. In detail what I have already done:
1) I made the procedure HARD RESET following the guides published on the forum.
2) I made the procedra of BOOTLOADER and loaded Rom (I tried with several Roma) following the guides published on the forum.
3) ActiveSync 4.5 installed.
The result is that the device will not start: the screen appears with the logo of the rom (Orange or HTC) and IPL data, SPL data, etc etc, but sometimes or remains firm on this screen, or other times the screen fades plan floor.
What can I do?
Best regards
Marco

Did u already tried another rom? Which rom did u use?
Is activesync still connecting with your device?

i tried with rom of:
1) Orange
2) Qtek
3) I-Mate
the first two i can install correctly, but device don't work... when i try to install rom I-Mate, it give error message about nk.nbf file isn't compatible with prophet. i know about a program NOID COUNTRY that install every rom on prophet... do you know this program?

pincho76 said:
i tried with rom of:
1) Orange
2) Qtek
3) I-Mate
the first two i can install correctly, but device don't work... when i try to install rom I-Mate, it give error message about nk.nbf file isn't compatible with prophet. i know about a program NOID COUNTRY that install every rom on prophet... do you know this program?
Click to expand...
Click to collapse
Check on boot loader that ur device did HardSPL properly, it should look like my sig.
Also why are you trying to put OEM ROM on, why not use one of the prophet wm6/wm6.1?

Hello,
after reading your post, I rebuilt the hardreset and then starts in bootloader, but does no more. I tried with any Rom, but always starts in bootloader (IPL 2.10.0001 - SPL 2.20.0001 indicates that is a G4 right?)
is dead? because I really tried with all Rom at my disposal, but the result is this hour.

pincho76 said:
Hello,
after reading your post, I rebuilt the hardreset and then starts in bootloader, but does no more. I tried with any Rom, but always starts in bootloader (IPL 2.10.0001 - SPL 2.20.0001 indicates that is a G4 right?)
is dead? because I really tried with all Rom at my disposal, but the result is this hour.
Click to expand...
Click to collapse
It would appear that your hard SPL was not sucessfull, it should say something like SPL : 2.G4.4PDA (or something similar)
Yes you have a G4 model. what were the steps you took to do SPL? did you follow the guide? Did you unplug all ur usb connections and try other usb ports?
If you start bootloader and connect your usb to device does it say USB on the screen? Also are you using windows XP on computer?

timmymarsh said:
what were the steps you took to do SPL? did you follow the guide? Did you unplug all ur usb connections and try other usb ports?
Click to expand...
Click to collapse
I followed the guide on PROPHET_HARDRESET_BOOTLOADER on WIKI: the operation seems to succeed because I see the message on the display of operating system restored. Tested with all the usb ports, and disabling the connection usb dall'activesync.
timmymarsh said:
If you start bootloader and connect your usb to device does it say USB on the screen? Also are you using windows XP on computer?
Click to expand...
Click to collapse
USB appears on the display and use xp.
I noticed that when upgrade Rom program start, I see on the display a green bar progress, but turns red when it arrives 99%-100%. It may mean that something is not successful, despite the process ends without mistakes?

What is the devices IPL/SPL, and what brand is the device?

l3v5y said:
What is the devices IPL/SPL, and what brand is the device?
Click to expand...
Click to collapse
Hi!!!!
sorry for late answer....
IPL:2.10.0001
SPL: 2.20.0001
GSM: 02.47.21
OS: 2.10.1.22
Brand: Orange
after installing the latest rom Orange, these are the data that appear on the monitor. But still not start. It remains firm on this screen, or this screen fades slowly as reported in a previous post.
From tomorrow I will be on vacation, return to this issue by September 1 ....
a greeting and goodbye to September 1 !!!!!

pincho76 said:
Hi!!!!
sorry for late answer....
IPL:2.10.0001
SPL: 2.20.0001
GSM: 02.47.21
OS: 2.10.1.22
Brand: Orange
after installing the latest rom Orange, these are the data that appear on the monitor. But still not start. It remains firm on this screen, or this screen fades slowly as reported in a previous post.
From tomorrow I will be on vacation, return to this issue by September 1 ....
a greeting and goodbye to September 1 !!!!!
Click to expand...
Click to collapse
If you have the time, download and flash an NVID Prophet ROM from the wiki. Make sure it's NVID though!

l3v5y said:
If you have the time, download and flash an NVID Prophet ROM from the wiki. Make sure it's NVID though!
Click to expand...
Click to collapse
Hello!!!!
i'm coming back from Paxi (Greece)... very nice island... good sea... good food... very nice gals.... i liked it!!!!!!
Downloaded from Wiki "RUU_Prophet_220734_2207114_024721_NVID" and installed without problem but nothing to do: the same problem!!!
Now when it start i can see first HTC Innovation Logo, after QTECK logo with:
ipl: 2.10.001
spl: 2.20.0001
gsm: 02.47.21
os: 2.20.7.34
but after some minutes the screen fade....
i would give you some information:
- into the device ther's not memory card and sim card.
- when i charge it, led is always red, also if leave in charge for 10 hours!!! It's normal???
Ciao
Marco

If the LED is red, I'd try and find a replacement battery.

read from here http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
and here http://forum.xda-developers.com/showthread.php?t=353547
read carefully ok...

stuck on flashing need help

hello everybody
now im using duttys 3,6 and i want to flash my hd with Davideuck_V-6.1_HP,Xip 21041, Build 21042, 1.56 BASE [13-05-09, UPDATED]
but when i start flashing it stays on 0 % i have spl 1,54,0000 and i dont know why this rom cant be flashed...need some solutions please...thanks

Had the exact same problem, but solved it by running USPL GUI v 2.5 before flashing.
Howto:
1.Put your phone in Bootloader-mode(turn it off -> hold the vol down and powerbutton simultaniously)
2.Download USPL GUI v 2.5 here
3.Extract the files somehwere
4.Find the executable named USPL.EXE and double click on it(I suggest running it as administrator; right-click -> run as administrator)
5.Your phone should once again enter into bootloader mode, but this time it should say SPL v 1.15.USPL and USB at the bottom.
6.Flash your ROM as described here

homola said:
hello everybody
now im using duttys 3,6 and i want to flash my hd with Davideuck_V-6.1_HP,Xip 21041, Build 21042, 1.56 BASE [13-05-09, UPDATED]
but when i start flashing it stays on 0 % i have spl 1,54,0000 and i dont know why this rom cant be flashed...need some solutions please...thanks
Click to expand...
Click to collapse
Your problem is that you need to run USPL before every flash to either new rom or radio.
USPL is temporary and therefore needs to be re-run before you can flash anything.
Alternatively HSPL is permanent and once loaded you do not need to re-use it before each flash. However it does void warranty.
You can either use USPL V2.5 or USPL GUI v2.5 or HSPL

Unable to downgrade my SPL from 3.13 to 2.20

Hi there,
Hope you can help me...
Since i bought my Cruise, I flashed it to the newest ROM version of HTC and it automatically installed SPL 3.13 with.
The problem is that if I want to install the WM 6.5 rom, I have to "Downgrade" My SPL version from 3.13.0000 to 2.20.
I followed the steps explained by "Olipro", but when the upgrade starts, RUU kills activesync (seems to be normal) and when the phone normally reboots in bootloader mode (like when you flash a new rom), nothing happens. The phone didn't shutdown and tries to establish a new USB connection !
I tried to turn manually the phone in bootloader mode on to force the SPL update, but the % bar stays at 0 and RUU returns a communication error (262).
I tried also to install the wm 6.5 rom without install SPL 2.2, but it crashes (stays @ 0% too)
I don't know how to install this stinky version of HARD SPL.
Heeeellllpppp !!
NOTE : I tried with or without µSd, does the same thing.
Thx

hmm try disabling firewall and antivirus one of them may be blocking the connection. Thats my only thought about it.

Thank you for the answer but it don't work...

Nobody can help me ?

Try to extract the files from the newest htc rom to a new folder, and then copy the "RUU_Signed.nbh" from the SPL V2 folder to the extracted files (to the new folder) and run the "ROMUpdateUtility.exe" from the extracted files (from the new folder).

nope ...

Please, consider my asks...
I know there is necessarily a solution but I have not yet found.
I don't know where/why it is crashing.
What does the HTC need to downgrade the hardspl ?
Is there a protection that can't be bypassed with the 3.13 ?
The only thing that I can do atm, is flashing the official HTC rom (useless ^^).
The actual version of my rom is :
_HTC Touch Cruise_RUU_Polaris_HTC_FRA_3.13.406.0_radio_sign_25.85.30.07_1.59.42.15_Ship
Thanking you in advance...

Pixel69 said:
Please, consider my asks...
I know there is necessarily a solution but I have not yet found.
I don't know where/why it is crashing.
What does the HTC need to downgrade the hardspl ?
Is there a protection that can't be bypassed with the 3.13 ?
The only thing that I can do atm, is flashing the official HTC rom (useless ^^).
The actual version of my rom is :
_HTC Touch Cruise_RUU_Polaris_HTC_FRA_3.13.406.0_radio_sign_25.85.30.07_1.59.42.15_Ship
Thanking you in advance...
Click to expand...
Click to collapse
HSPL 3.13? In this ROM is ver. 3.13 drivers, not HSPL... If you have original ROM and you dont install Olipros HPSL, you have original HTC SPL...

When I enter bootloader mode, the HSPL version is : 3.13.0000
Of course it's the original htc HSPL.
The problem is that I can't downgrade it to the olipro's version : 2.20.

Did you try it on other PC?

2 PCs, 2 USB cables..
The official rom upgrade works fine, I dont think that the problem comes from the computer.

definite guide:
1. establish a connection with activesync via usb (orbit2 to pc)
2. start the romupdateutility provided in hardspl folder.
3. before it starts flashing, you need to also follow on-screen instructions on orbit2!!! execute jump-spl and stuff: click yes on orbit2!!
4. when the orbit2 states: Replug USB. you need to plug the usb-cable once off and then put it back to connect to your pc.
5. it starts flashing and restarts after its done.

Hi Manaaa,
I don't know what is jumpslp ??
I found it on the web (xda..), copied it in my "my documents" folder, ran it but it asks me a jump address (default is 0x00000000) and an spl (*nb) file..
What is jump spl ? What is the address to jump to? and where can I find the *nb file ?
In the olipro's hspl folder is only a *nbh file.
Thank you

I wouldn't recommend using a jump spl for our phones if there isn't one in the Hardspl Pack then one is not needed to be run.
Personally im still really confused by this so if i get it straight.
You are synced with activesync.
Run the file for Hardspl Run RomUpdateUtility.exe
Then go though. It switches off activesync.
Then what?? Exactly Does it ask you to replug the cable? Do you get the rom flash screen (with %) at all??
Also i dont think that spl flashes can be run from the booloader as it has to be a modded bootloader (jumpspl if you will), loaded by the program to be able to flash the new hardspl.
Also i know very little on this, this is as much as i understand it to be.

chris10230 said:
You are synced with activesync. OK
Run the file for Hardspl Run RomUpdateUtility.exe OK
Then go though. It switches off activesync. OK
Then what?? Exactly Does it ask you to replug the cable? NO
Do you get the rom flash screen (with %) at all?? NO
Click to expand...
Click to collapse
Normally, after killing activesync, the phone turns into bootloader mode. Mine stays in winCE and tries to establish new usb connection...
I also decided to force manually bootloader mode and killing activesync by myself.
I ran RUU again, it first checked the phone state (such as battery >50%, connectivity...)
CHECK : OK
Next step, by clicking "NEXT" on the RUU interface, the phone turns in "% mode" and the update starts but stays at 0%.
After a while, RUU returns an update error (such as 262).
Noway to flash hardSPL :'-( , v3.13 seems to be "write protected".

ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Click to expand...
Click to collapse
That is what error 262 is but really dont see why this happens either. And since you can boot into windows its not much help.
So it just wont go to flash it when you click it through, hmm
Your last resort would be to PM cmonex as she will have helped make this with oilpro. Ask and see if she can shed some light on this one. Maybe something has gone wrong somewhere (quite likely) that we don't know how to fix.
Stupid question but have you tried downloading, unzipping it again? May have been a bad dl... or unzip

Have tested it with about 10# DLs...
I PM'd Olipro, waiting for a response now

Flash back to HardSPL and don't Re-Plug
Hi Pixel,
Herewith are guide for you
1) Flash back to HardSPL and don't re-plug until end of session (5 minutes)
2) Flash back to original SPL 3.13 on this post . This original SPL for HTC Touch Cruise only
3) After you do this you cannot flash with other Cooked ROM or Shipped ROM
with different ID, unless you flash back to HardSPL
Good Luck my friend

I have exactely in the same configuration as Pixel69 with the same result.
I've tried to an other PC without any change.
Has somebody any idea?

Just had an idea what OS are you running to do it?
If its not 7 may not be fully compatible... Shot in the dark really