I've had two Wings with the same issue: no matter what access point I connect them to, the connection drops randomly.
When this happens, the icon in the display still shows as connected (two parallel arrows), the Wi-Fi status shows the device is associated and has a valid IP address, BatteryStatus shows the device is connected to the AP, and Comm Manager shows green on the Wi-Fi icon.
But, you cannot browse the Internet nor can you synch email (I use POP3, Live and Exchange direct push messaging).
Putting the device to sleep and reawakening it instantly reconnects Wi-Fi as does shutting the connection down and restarting it in Comm Manager.
This happens on any Wi-Fi access point, and I have tried about six: multiple T-Mobile hotspots, WPA2/AES and WPA/TKIP encrypted hotspots and completely open Linksys WRT54G access points.
This HAS to be a setting in WM6 or in the adapter settings somewhere. T-Mobile hasn't got a clue and many searches on the Net haven't turned up a clue.
Has anyone else seen this?
I too have noticed this
Its weird mine too loses connection I had always thought it was my WiFi at home because its a crap router but i guess not anyone have a fix?
Related
For some reason I can connect to the internet very easily through GPRS (even when roaming), but at home with my own wirelss LAN, I can connect with no problem, but each time I try to access anything on the internet, I get a pop-up stating "Could not locate remote server". I don't have a router, I am using a desktop as the gateway, I am currently accessing the net with my laptop through the same means. All configurations for the LAN appear to be correct, but I must be missing something on the JAMin. In the WiFi settings, I see the LAN, almost full signal - Ad hoc Mode - status is connected - I'm assigned an IP ... seems like everything is in order.
Will one of you wizards point out what I've missed? I know it's probably simple, usually is.
If I'm having trouble connecting a device to a network that has previously been working ok, the first that I do is turn off all network security i.e WEP, MAC address filtering etc. Then reboot the wireless access point/router and your device. If you still can't connect, you can start to blame your device.
Don't think it's a network prob...
Thanks Matterhorn, but my laptop is still connected fine, no problems there... I get the feeling that the PPC's only recognising the GPRS as a valid network for internet access... it works okay when I login to a commercial WiFi network (when I'm in the States) but for some reason on my own network here at home, it logs in, just can't find a server for some reason. The first thing I thought of was the firewall, turned it off and still no luck.
Any other ideas? I thought maybe there was a setting for default AP or connection, but can't find it, nor can I find an appropriate reference in the manual. Ugh!
Resolved!
It would seem my JAMin was trying to access the internet not through the gateway, but through my laptop. As I don't have the laptop setup to share an internet connection, it would allow my JAMin to connect, but that was all. I went in the room where my desktop is, registered on the network there and bingo!
Too simple, should have tried that right away but it didn't occur to me at the time. Thanks for the help anyway Matterhorn!
Hi,
I tried to connect my tytn to my wifi network for the first time yesterday, and couldn't get any web pages to load.
I was connected to the router, and had an IP address assigned by DHCP, but whenever I tried to load any pages in IE, it sat at 'locating' for ages and then errored.
I thought nothing of it and thought I'd give it another try later. But since then, I get the same problem when I try to browse via activesync. The device syncs properly and is connected, but I can't load any web pages.
My first thought was a DNS problem so I've tried setting some static servers but I'm not getting anywhere. I tried 'Microsoft Network Analyzer' which gives me ticks in all the tests (even the one where it pings www.microsoft.com, when I can't browse to there).
I'm now thinking that when I'm connected via activesync it's still trying to use the wifi connection somehow (even though it's turned off). In the network adaptors, wifi is set to DHCP but has an ipv6 address in the box under static IP (odd, as my router doesnt use ipv6).
I'm pretty lost now. I could do a hard reset but I've got a feeling I'd end up in the same place when I next try to get wifi to connect at home.
Any ideas?
StarMonkee said:
Hi,
I tried to connect my tytn to my wifi network for the first time yesterday, and couldn't get any web pages to load.
I was connected to the router, and had an IP address assigned by DHCP, but whenever I tried to load any pages in IE, it sat at 'locating' for ages and then errored.
I thought nothing of it and thought I'd give it another try later. But since then, I get the same problem when I try to browse via activesync. The device syncs properly and is connected, but I can't load any web pages.
My first thought was a DNS problem so I've tried setting some static servers but I'm not getting anywhere. I tried 'Microsoft Network Analyzer' which gives me ticks in all the tests (even the one where it pings www.microsoft.com, when I can't browse to there).
I'm now thinking that when I'm connected via activesync it's still trying to use the wifi connection somehow (even though it's turned off). In the network adaptors, wifi is set to DHCP but has an ipv6 address in the box under static IP (odd, as my router doesnt use ipv6).
I'm pretty lost now. I could do a hard reset but I've got a feeling I'd end up in the same place when I next try to get wifi to connect at home.
Any ideas?
Click to expand...
Click to collapse
Check your connection settings. Some carriers have proxies enabled for your GPRS connection. If you have proxy active, you will not be able to connect through a router. AT&T does this, for example.
Yep, that was it!
My GPRS was set up under 'My Work Connection', and had a proxy server. I disabled the proxy and activesync started working.
So I completely cleared out the 'My Work Network' connection, and added a new one for my providers GPRS which made activesync work. I then set the preferred networks to Work first, then GPRS second, and everything works.
Thanks
My wizard has found my home router and has a strong signal but when i come to use msn messenger or ie it will not connect.
Any ideas?
'When connecting to a WiFi hotspot from a Windows Mobile device, you first turn on your wifi then the tower like arrow appears in the Start bar. Near the tower two oppositely pointed arrows keeps moving when connecting. These arrows should stay stationary meaning the network is successfuly connected. If you try using msn when the arrows are still moving, you'll end up seeing the device has no connection!
Regards,
Carty..
looking at the wifi it is active. i've checked the settings and it has a valid ip address but still will not connect.
but the gprs for t-mobile will let me connect but it costs £££.
Is your wireless router security encrypted??
Mine is.
If I connect to wifi on my device at home, it will ask for my encryption passkey. Then I tell it to save. From that point I can connect at home no problem. Now if I re-flash my rom and forget to enter my passkey, my Wizard will recognize my wireless router, but will not connect until I remember to re-enter my encryption passkey for my router onto my Wizard.
This may or may not be your problem, but I hope it helps.
PS- I created a simple text document with my passkey on it and saved it onto my SD, so now all I have to do is copy and paste the passkey. Makes life much easier.
(Posted by soopahfly)
I set the network up and the only security on the network is MAC control.
It will not issue an IP address without a valid, recognised MAC.
My Trinity will access the wireless fine here but the Wizard won't.
Its issued with an IP, Gateway and DNS servers but won't access the net.
Same deal at another house where the network is WEP encrypted and the passkey is known.
I have the same problem. My Blue Angel works fine with WiFi on WEP, but my Wizard does not. If I disable all encryption, it works just fine. But I don't want to get rid of the encryption. Any ideas?
Hello,
I am having the following issue while using Wi-Fi: in the list of available networks is a type of connection I have not seen before. It seems to be a modification of sorts of my own wi-fi connection, but if the device connects to it, I cannot connect to either websites or to the other PCs on the LAN.
This connection is represented by a different type of icon as you can see on the screenshots. I have not created it, but it may be a remnant from my previous connection - look at the names, one has a space in between, the other hasn't. I created the new one (without the space) after I changed my router to D-Link's DIR-600.
An interesting thing about this connection is that the device does connect to it even when not anywhere within range of the router (say 2-3 km.)
Any ideas?
This the symbol for an Ad-Hoc network (Computer to Computer). You can probably remove that connection and still be o.k.
Thanks!
I tried removing it, but it then creates it again.
Of course, I can always disconnect and connect to the other network.
I have never dealt with Ad-Hoc connections. Isn't this connection supposed to enable access to the other computer then? Like LAN? And why does the device connect to this network when far outside the router's broadcast signal?
Looking at the attached devices page on my router all my other devices (laptop, printer, other phones etc) all show up with their IP addresses but my HD2 doesn't.
It's definitely connected though as I'm able to use the internet and the WiFi control panel claims to be connected giving me an IP address. Pinging the IP address android shows me gives me a host unreachable message.
I've tried restarting everything, no change, and there isn't any devices with the same MAC address on my network either.
I'm trying to set up samba file sharing, so any help would be appreciated.
Never mind, Found a work around
strikernl said:
This does it for me:
turn on normal Wifi
wait around 10 seconds (for Wifi to 'start')
turn on Wifi hotspot (normal wifi should turn it self off automatically)
wait around 20 seconds (the hotspot takes a while to 'start', it actually fails (error) for me, but still does the trick)
turn normal Wifi on again
Click to expand...
Click to collapse