i have 3 wizards: 1 is a cingular 8125, 2 are t-mobile MDAs. the 8125 and one of the MDA are both G3, and one MDA is a G4. both G3s are running WM6 no problem, both CID unlocked and all. used the shell tool to install the TNT3.0 WM6, worked out well after the 2nd try, but the ONLY problem is that the internet explorer (and any internet related apps) won't work anymore. i can connect to EDGE/GPRS, the IE will say "connecting...locating...opening" and get stuck at opening. finally the IE will report:
Error 502 - Bad Request
The server could not resolve your request for uri:/
note it says "uri" and not "url"
i don't get it. both MDAs were flashed with the latest T-mobile ROM, clean install. the only difference is that one is a G3 and one is a G4.
what is the problem with my connection?
phone calls OK, SMS OK, system runs fine. just can't seem to get the HTTP related service to work right. can anyone help?
Bump
B u m p .
Same problem, please help. Using BD3.1
try installing with softspl... from a clean install again
Related
I'm new to this forum and it seems like a great resource. I have seen this question answered but the answers are still above my head in terms of complexity. I've got an AT&T branded SX56 running 2002 and an XDA-Developers ROM (I think). It is unlocked, I am guessing through the use of an XDA Developers tool for unlocking. I'm in Colorado and using the phone with T-mobile. My question is this, I'd like to upgrade to 2003 and have downloaded the file to do so from Siemens website for free, which is great. It had some nice enhancements and I thought I'd upgrade to it. So, I downloaded/installed the new ActiveSync v3.71 and then tried to run the upgrade. I got the same message many have gotten apparently saying that the ROM Image is not compatible. The specs are;
current
Model PW10A1
ROM 3.17
English
upgraded
Model PW10B1
ROM A.30
English
In reading through the posts it seems that I need to upgrade the ROM of the device, but I still get lost looking at "cooking a ROM", etc and what exactly I need to do. Making this a little more urgent is the fact that after I tried to upgrade the phone (which gave me the ROM error) my internet connection on the phone (which was working fine) suddenly doesn't work with explorer or outlook on my phone giving me an error "Trouble Connecting; Unable to connect with current settings" even though I didn't change the settings and they look exactly as they did before. So, I feel like I've messed something else up on the phone even though it didn't get to install the whole upgrade.
So, any advice for a novice? Thanks in advance, I appreciate any help you can give.
Best regards,
chefandy
the official AT&T release for WM2003 is an exe file contains both ROM & RSU upgrade, and it aparently designed for PW10B devices (900/1900 MHz).
i think the first part of the faulty upgrade (usually RSU) affected your device ... i really hope not
chech your device info and tell us what's there. if u can still get to the boot loader screen and activesync can still connect to the device, then it's not a severe damage. I think successful RSU upgrade with the right stack would solve it.
I'm not sure what the boot loader screen is, but the device still syncs just fine and seems to be working ok except for the internet connection issue. The funny part is that I can connect to the GPRS connection by going to the connections screen, but then when I transfer to Outlook or Explorer they do not recognize the connection as something they can use.
Is the Siemens upgrade I downloaded (http://www.my-siemens.com/MySiemens...C%2FMC%2FSX56POCKETPCPHONE%2Fdanda%2F,00.html) different from the AT&T upgrade you mention? I also saw there was a T-mobile upgrade to 2003 but it was not available when I tried to download it from tmobile.com. Thanks!
That's great! .. ... It seems I misunderstood your issue ... I thought you lost the RSU part.
I think something wrong happens to the registry values ... you see, there is a reference for each defined connection in the registry which all applications that may require to connect to GPRS or WAP or MMS can refer to.
I suggest that you delet ALL connections and start the setting from scratch ... I can't guarantee it will work since some applications may be required to be uninstalled and reinstalled to use the new connections references (if it has smart uninstaller!!).
The last resort is a hard reset which will bring the registry to the original setup.
Well, I did what you suggested and started with a new connection and it worked :lol: Thanks!
Now I'm back to the original question about whether or not I can safely upgrade to WM2003 or not? Thanks again for all your help.
The answer is YES! ... it's easy to upgrade ur ROM to WM2003 if u know what ur doing.
spend some time reading this forum on how to cook a new ROM from the kitchen ... and it's better to get yourself SD card for flashing and backup.
Hi!
I got a major problem when i upgrading my Qtek1010 to PPC 2003..
It works really good until the machine goes on suspend or i try to reboot.
I can't get it to restart, it's like the "on button" is broken. If i press soft reset the machine boots up really fine OR if i open and close the sim card holder...
Does anybody have a clue over what's wrong? I have been trying to find the answer on the forum but with no luck...
/Mike
Have you KSE Truefax on your device?
Than this is the problem....
HTH
Stefan
hmm, another error..
Thanks for the help, the phone is working now, except for one thing.. GPRS!!
Vodafone has made som upgrade on GPRS so QTEK want's me to send the phone to service... There should be a way to solve this without sending the phone... Do you have any idea? Maybe it's the radio that needs upgrading?
do you have the right settings for vodaphone where you live ?
often you have to manualy setup such settings in connections after a rom upgrade
you can try search for which settings vodaphone use
I've tested different settings, but i don't think that's the problem. i think that i have to use the right radiostack or something like that to get it to work..
i have failed miserably in the attempt to get wifi working properly on my 8125 with the new IMATE rom flashed.
i downloaded the original cinular rom from the ftp and am going to flash it back. I notice 2 files on the ftp, a zip and an rar, i assume they are both the same .nba file because of size?
I am going to use aWizard to flash it back. I am not sure how the splash image portion should be done, and i want to make sure i do everything right.
Anyone done this yet?
Once i do it i will post my results on the 3 routers i have curently, and my success at logging into them with the wizard with the SAME settings ive been trying with the imate rom.
Anxious for any responses. thanks.
Dan
good luck. I have been using the 2.16.9.1 WWE rom on my cingular 8125 since the day the imate rom was noticed on clubimate's site. I have connected to 2 different access points (Netgear WG302 and a dlink xxx??) The netgear uses WPA TKIP and the dlink does not use any encryption. Both work flawlessly. did you install any original cingular cabs when you were using the I-Mate rom?
Re: To FIX WIFI, Going to reflash cingular ROM & test. O
danrw84 said:
i have failed miserably in the attempt to get wifi working properly on my 8125 with the new IMATE rom flashed.
i downloaded the original cinular rom from the ftp and am going to flash it back. I notice 2 files on the ftp, a zip and an rar, i assume they are both the same .nba file because of size?
I am going to use aWizard to flash it back. I am not sure how the splash image portion should be done, and i want to make sure i do everything right.
Anyone done this yet?
Once i do it i will post my results on the 3 routers i have curently, and my success at logging into them with the wizard with the SAME settings ive been trying with the imate rom.
Anxious for any responses. thanks.
Dan
Click to expand...
Click to collapse
I had same problem after upgrading MDA pro with new iMate rom 1.30
I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.
Manually enter IP address could solve the issue?
ethorn said:
good luck. I have been using the 2.16.9.1 WWE rom on my cingular 8125 since the day the imate rom was noticed on clubimate's site. I have connected to 2 different access points (Netgear WG302 and a dlink xxx??) The netgear uses WPA TKIP and the dlink does not use any encryption. Both work flawlessly. did you install any original cingular cabs when you were using the I-Mate rom?
Click to expand...
Click to collapse
Same rom for me too. I can detect the routers but cannot connect...
I just ran K-JAM_WWE_216901_2169101_020710_ship.exe, let that instal, and also let the customizations install. Nothing else.
Any ideas?
is it not detecting, not getting an IP, or getting an IP but not getting out?
ethorn said:
is it not detecting, not getting an IP, or getting an IP but not getting out?
Click to expand...
Click to collapse
I have the same problem. In fact I started a thread about it a couple days ago. It connects, but doesn't allow data to pass (I do get IP Addy). I also can't use passthrough on the laptop.
I loaded a very few of the Cingular cabs and actually narrowed it down to one of two that totally killed my WiFi connection. However, if you find the thread I made, I also found a registry entry referring to a preferred connection, and MEdia Net was in there (I'm thinking is the problem, but don't know how to change).
Used aWizard and sucessfuly installed the Cingular ROM i got from the XDA ftp site.
WiFi works like a charm, with the same settings that the unit had with the new IMATE ROM. This is very upsetting!
Anyone have any clue why this is?
Also - since I am not using the IMATE ROM anymore, any way to restore the original boot screens, delete the HTC one, and the IMATE screen and replace it with the Cingular? Reason I ask is i need to exchange this phone within my 30 day return period because the keyboard is loose.
Thanks
Hi there
I am new to this forum, I have purchased an SPV m600 on Orange from ebay, and I was woundering if I can upgrade the rom to T-mobile Vario. Has this been done before and will it work. If not please can soemone let me know where I can get other roms for this device. I am a t-mobile users, and the phone keeps on freezing when I enable push mail.
Cheers
The vario is the wizard while your device as you know is a prophet. Attempts to put wizard ROM on prophet "as is" were made with WM 6 but the results were unusable.
Chances are you will brick your device completely.
But note this: you push-mail problem shouldn't require a ROM change. All orange customization is in the ext ROM so try hard resetting your device, the soft resetting just after you finish all the calibration and stuff so the ext ROM wouldn't install. Then get the proper connection setting for T-mobile and see if it works.
Thanks for your help, are there any other Rom's I can install on that device ie, Imate or XDA. This way I will remove all the Orange setting of the device.
I have entered all the t-mobile gprs settings on the device, but it still frezzes every so often, but everything works still the web and email. I am not happy with the device fall asleep for 30 sec or so.
Cheers
Try the forum search for the Qtek 2.20 WWE ROM! This ROM is in english and have no Ext ROM from a provider such as T-Mobile or Orange! I think this would help you!
You must setup the connection data after finish installing manually but this isn't a big problem!
spv m600
Thanks for you help, if you come accross the link then let me know. I will do some searching over the weekend.
Cheers
Refer here for latest guide
http://karhoe.net/guide-upgrading-h...indows-mobile-6-update-september-06-2008.html
Sorry Karhoe - can't get the link to work. It's taking me to a "cannot display this page" error.
Very interested though (son's got my Typhoon 0 he may not care about it's OS but need something to FLASH!!!). Thanks.
Link was down because server was down, now its up again, gv it a try
Hi, karhoe, can you modify the download link to the final version.
Link in first post updated
connection error
I get a connection error during flashing step 5. I have checked all connections and used different cables. Any suggestions?
Peter
Did you turn on back your USB ?
What does error on Disk On Chip mean? What are we to do if we encounter such an error? error code =27
No idea, try to reboot you phone and repeat the process
I actually got the answer myself.. Said error occurs if you fail to press 0 on the boot loader portion of the ROM update process. Got WM6 now.. phone performance is a little slow than WM2003 but it is not that significant to return back to 2003se yet...
Thanks
Thanks for the thread your the man!!!
upgraded both my SPV C500 & XPhone II to WM6 without a hitch from not knowing a dickie about Flashing roms thanks for your tutorial and your link to the others great KARMA TO YOU--
The only thing i have come across is that when i start the camera iget an error message ("Unable to initialize camera-Failed to set up camera device") can you or anyone help out pls other than that it is perfect i would like to resolve this as i tend to use the camera & video a lot...
Thanks
You need to configure the camera driver, in the settings there
peterow said:
I get a connection error during flashing step 5. I have checked all connections and used different cables. Any suggestions?
Peter
Click to expand...
Click to collapse
still getting the connection error. It is the step before you turn USB off so it is on and synced before I start this step.
Thanks
karhoe said:
You need to configure the camera driver, in the settings there
Click to expand...
Click to collapse
I have done but still getting the error messange i have tried 0.3 & 1.3 and i get the same error for both BUT am i doing something wrong?
did you try to restart the phone after selecting the 0.3 driver ?
hi! please help me on the music buttons of my xphone IIm.... it's supposed to be a music edition of the xphone II... but now in WM6, music feature buttons dont work....
Some guy already fixed it,search in the Tmobile SDA thread
Hi everybody,
I would like to know if this version of wm enable the a2dp for the C500 (alias typhoon)?
thanks a lot
Upgraded my T-Mobile SDA to WM6, works great!
Unlock Error on SPV C500
I have tried searching the forum and cannot seem to get the answer i'm looking for but forgive if i have missed it:- When using SDA_Aplication_Unlock iI get this errror message (Phone cannot be unlocked) as soon as you click (Remove Lock) can any one shed some light pls.
I have even tried sim unlocker - or it it that simple that this phone just cannot be unlocked?
SPV C500 Specs:
Windows Mobile 2003se
Ver: 4.21.1088 (Build 14217)
Radio Ver:1337.032_0.03.18
Processor: ARM OMAP 730
Rom Update Ver: (No Data)
Operator: 4.1.1.4
I have another SPV C500 that i unlocked/ supercid/ upgraded with no problems also an XPhone II