Related
OK so after having problems connecting my XDA2s to my laptop via wifi to use it's ADSL connection, I began to realise it was a major issue for a lot of users.
Having covered almost all the threads here regarding PPC WiFi issues, I still am perplexed as to how the whole thing is successfully set up.
I concluded that it was virtually impossible; that the PC would not provide the PPC with an IP address so I would have to use some sort of application to manage the connection. However, yesterday for some reason only the omnipotent holy deities of the grandiose gods of WiFi would know, I had it working perfectly. For about 10 minutes, until I decided to disconnect to see if I could readily re-connect. My hopes were of course, dashed, and I have not had it working again since.
I have tried every combination of settings on both the laptop and the XDA to no avail, and have followed more threads and links than I can count on my fingers and toes. I've tried all the same settings I had when it was working (briefly) but still have no real success.
So basically, what's the deal with getting this damn thing working? Maybe what I need is a step by step idiot's guide on how to initially set up the wireless network on the laptop first, to make sure it has all the right settings? I'm using a Vaio running XP home (built in WiFi).
Has anyone completely resolved this problem yet? I would really like a solid, clean method of setting up the connection rather than stumbling through a million different combinations of settings and ending up with something hashed and unstable.
Many thanks for any help on this, I'm sure it's a tiresome subject for many.
......And as is always the case, as soon as you post about it you figure it out!
If anyone is still having trouble using their XDA2 to connect to a PC's ADSL via WiFi, ive got it figured!
RE: ive got it figured!
PLEASE HOW? I HAVE ALSO THE SAME PROBLEM HERE
THANKS
Me too. I have a XDA mini S.
I don't know what settings to put into the thing. I had it connected for a short while but when I went into internet explorer it started connecting to GPRS instead of WIFI to internet.
Clearly I haven't got a clue. The book is of no help either.
Any ideas?
Thanks
Think i'm connected to the internet. It doesm't seem to want a password although one is listed listed in the router. Just can't stop it going over GPRS instead of the wifi for intenet????
problem solved
Hi All
Ok heres what I did .
Connections
under my work network
set ,set up my proxy server to "this network connects to the Internet.
Then go to advanced
Under select networrks ,Network management,Set both to "my work network"
Network Card
Network adapters
"My network card connects to work
Then select the network card ie sandisk
tick Use specific ip address
type in 1 thats on your network ,It will connect but you wont be able to browse still
Then soft reboot
change from use ip adress to "server assigned ip address"
soft reboot
and bingo
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
danrw84 said:
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Does wifi turn on? (Does the left LED blink like it does when wifi is turned on?)
If not, then it could be related to a cingular cab - did you install any of the cabs from the original cingular extended rom?
left led does blink.
ive also gotten as far as picking up a network.
i have tried everything, i cannot get my wifi to work at all. i dont know whats up.
the settings i needed (which i replicated for the new rom) on the old rom, was this
I would select networks, MY work network, this connects to the internet.
then in the WLAN adapter i had to manual enter my dns servers.
thats pretty much it to get it to work, but now with this rom it wont
Similar or different problem? Not sure. PARTLY SOLVED!
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Hi NG,
I updated my O2 XDA mini s (German) from OS 1.3.4.2 to 2.16.9.1. (Radio 02.07.10 included). To be honest, I was never really happy with the quality and reliabilty of the radio. 4 out of 5 times it did work, but once in a while, especially while roaming, it gave me a headache. After unlocking and updating to the new version, WLAN looks to be working quite well, at least for connecting to access points, but it seems that it can't browse external websites. VXutils give back a socket error trying to access external (outside my home network) websites/Email.
Internal (inside my home network) connections work like a charm. Termincal Services client accesses my Win2003 Server no problem and I can also connect to a website hosted on my internal server. (http://servername:port).
Whenever I try to connect to external sources, the browser stops afer not successfully "locating" the respective server. On the other hand locating might not be the problem. Performing a ping to an external site with VXutils properly picks up the right ip address but cannot send/receive ping!
GPRS works as supposed. Can connect to sites with no problem.
May be somebody experiences the same problem or, even better, has a solution.
By the way I used @Work for all possible settings. The work profile is set up for both connection types.
Besides that, the new rom is really nice
EDIT Well after some time playing around, I have solved the problem or better the problem partly disapeared. In 'Settings' 'Network Adapters' I switched from Use server-assigned IP address to manual and entered IP, DNS, Gateway, etc. With these settings it everything worked after a soft-reset. Going back to DHCP and soft-reset, it first worked an now it doesn't anymore. At least there is a work around and I'm trying now some other things. All machines currently work with the DHCP settings correct. I will check and keep you updated if the problems comes from Server settings or from something in the PDA EDIT
Lars
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.[/quote]
Darn it. I did. I'll re-wipe and not load the 54g upgrade. Thx.
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
no i didnt load anything
but i want this wifi to work! what the heck!!
try this
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
Danrw. Concerning the registry settings, after patching the os I did change the registry settings. One already existed with the right value as shown in the 802.11g thread. The other one, DotG, I added.
After that, it did pick up a only G router!
As far as setting DNS manually. It is not enough to just cange the dns setting. You have to enter all the information and even after a soft-reset it takes some time to have the settings picked up... Use vxUTIL 'Info'-Screen to check the current settings. I did test wlan before and after applying packages from the extended rom. No change on reliability or performance on WLAN IMHO.
As far as I understand. Your problem is actually connecting to the router/Access Point. For testing please disable all security on your router and do a soft-reset before trying to access. Also since we have heard of several problems with model 9100 not realizing if an access point is available or not. Also change the SSID of your router and if possible the MAC Address of the router.
Don't forget to soft-reset and first try SDIO Adapter inyour pda with auto IP/DNS/etc. settings.
Another thought. Embarassing, but once I messed around with trying to get a new pda online and forgot to disable the mac filter settings in the router, which resulted in being able to see the active router but it didn't let me connect. After those two days I was missing a lot of hair.
Good luck
Lars
summiter said:
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
Click to expand...
Click to collapse
I did but only the minimum. I trimmed down their install to the basics. I narrowed it down to one of two CABs. Either the gprsstall or EnableEONS. I didn't install either of those and I"m now back up and running. Of course, I still can't get it to prefer WiFi to EDGE.
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
eb said:
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
Click to expand...
Click to collapse
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks[/quote]
I do not know if my solution will work for you because I upgraded my rom to 2.16 but lets give it a try. I use d-link DI-524 wifi router. Start menu > Settings > Connections (tab) > Network Cards [I must admit earlier today when I was trying to connect my k-jam to the wifi, I did get as far as it asking me for my authentication code and afterwards it timed-out] --> select your wifi network [at this moment as I'm trying this out my wifi on my k-jam is off] --> Network Key (tab) > it was the key index that I had to change from 1 to 2. Before doing this though, go to your router's wireless configuration page through your webbrowser and make sure the keyX (it looks for d-link this can be from key1 to key4 or at least on mine) and make sure the key index you select on your mda is the same number that is used on your router for code authentication.
Also I noticed after resetting my k-jam that I could get connected to my wifi but I could not surf, in wifi setting on my k-jam I had to hit renew ip and then I was able to surf.
I hope this works for you. Good luck and many late nights.
no luck with this for me
even tried removing wep all together. tried multiple routers.
i can detect the ssid's, but i cant connect to them. times out on the connect.
Mine worked no problem...you may already have had this suggestion but here was my process.
Unlocked with lokwiz
Upgraded
Reset before extended ROM apps installed
Installed total commander
deleted extended ROM
Upgraded again
i re-installed the CINGULAR ROM and WiFi works like a charm
......any clues?
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
kristiandg said:
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
Click to expand...
Click to collapse
What does timestyle and wifirate4 do? I don't have these installed and haven't seen any problems.
Hi all,
I have an i-mate k-jam and I was wandering what was the best software to automaticaly connect to any open wifi.
I'm currently using WiFiFoFum2 that has a really cool radar detection and the possibility to add them as POI in TOMTOM. But it doesn't try to connect to the wifi network it found.
Do you have a good war driving prog??? (Maybe one that can try to Hack the "password protected" network)??? In general, what tool do you use for war driving???
Thanks.
I agree this would be a neat idea, especially if used with a GPS/Google maps/etc. to mark open networks. Im in Boston, and open networks are ALL over the place.
I don't know if this is a good idea.. because many networks have no encryption but they re-direct you to a web page in order to register (they check the mac addr)
The best way is to use wifofum to find networks with ssid default, linksys, usrobotics, wireless, etc...
then you can connect and check your e-mails
I can add that even on a fast machine it takes quite some time to hack 128 WEP, Let alone WPA. You need to capture about a million packets if the encryption is 128 WEP, then you can crack the code, in about an hour on a 2 ghz lappy with 512 of ram (last time I tryed =)) 64 bit WEP may be possible on a pocket pc but I cant think of anyone who would still use that. That lappy could crack that in about 5 min, with a minimal amount of packets. Nice idea though :twisted:
Later; Lew
you don't need to crack anything...
I travel a lot...
I need max 10min walking with wifofum to locate an unencrypted access point that shares internet... with ssid default etc...
I was in amsterdam last week. I could find open APs anywhere (even inside the room of my hotel from a nearby house/company) !
And you are not breaking any law....
If you crack wep then you do...
many foolish people turn on WEP or WPA and use the routers default pass key, maybe a program with a list of default keys which it tries could be useful.
The defaults keys may vary from manufacturer to manufacturer but there are lists available on the internet.
R
ameriaux said:
Hi all,
I'm currently using WiFiFoFum2 that has a really cool radar detection and the possibility to add them as POI in TOMTOM. But it doesn't try to connect to the wifi network it found.
Click to expand...
Click to collapse
Try HitchHiker 0.4 beta1 (http://www.kasuei.com/hitchhiker/) it's similar to wififofum but it will connect.
No WEP cracking or dictionary attack though.
bye
risidoro said:
ameriaux said:
Hi all,
I'm currently using WiFiFoFum2 that has a really cool radar detection and the possibility to add them as POI in TOMTOM. But it doesn't try to connect to the wifi network it found.
Click to expand...
Click to collapse
Try HitchHiker 0.4 beta1 (http://www.kasuei.com/hitchhiker/) it's similar to wififofum but it will connect.
No WEP cracking or dictionary attack though.
bye
Click to expand...
Click to collapse
Tried this - unfortunately it kept dying shortly after conecting to an available network - went back to wififofum2 - admitedly it doesnt connect but it does a good job of finding networks.
.NET 2.0 and Hitchhiker
Hitchhiker says it needs .net 2.0, and that is 24MB! Does it really need .net and how much free space does .net require? Will .net install on the sd card?
Found a cab file here:
http://forum.xda-developers.com/viewtopic.php?t=51118&highlight=net
and it is 2MB. Would still like to know if this can install on the sd card, does it screw up .net version 1, which is needed for registry wizard, and is hitchhiker worth it?
bratag : i noticed that the Hitchhiker crashed due to trying to connect using Pocket MSN. Try registering your MSN using the pocket MSN.
I did it and it works find after that
Tried Hitchhiker in WM%
and it crashed incessantly, sometimes taking the whole device down. It was a nuisance to install .net 2, although it helps to use the cab file located at
http://forum.xda-developers.com/viewtopic.php?t=51118
and then to follow the instructions involving shutting off the today screen items, soft reset, shut down all running programs (I used memmaid for this) and then install the cab. That got .net to run. Then I installed hitchhiker, but it seemed to conflict with the default wifi connection. I was near a wep enabled wifi connection of my own. Hitchhiker would accept the password and even connect me, then crash. I could still reach the internet even after it crashed, although a couple of times I had to do a soft reset because the screen wasn't responsive.
There was a report elsewhere of a t-mobile / hitchhiker problem, so perhaps it is the T-Mobile customization.
Is this really better than the native wm5 program for finding wifi's and connecting to them? Actually, often I can't connect to unprotected wifis very well, which is why I tried this program, but with 5 MB for .net and frequent crashes, it doesn't seem worth it. I would appreciate your reaction, however, since I would like to be able to use voip (sjphone) in Europe and readily connecting to wifis would help.
Yes Hitchhiker crashed for me too...
Finally I use an old version of WiFiFoFum = 0.3.3 to detect hotspot but unfortunaltely can't connect with it...
Ive tried Wi-Fi companion but it's a shareware and can't make it work on my 9100.
Does somebody has a complete list of the default ssid (maybe depend on the country)... linksys, usrobotics, wireless...
I'm really interested in the routers in France and USA.
Thanks
Wifi Companion is a pretty nice app. It has a connect option and has trace route and ping utilities as well..
http://www.socketcom.com/product/SW1221-596.asp
I have used all of those mentioned and had problems with all of them freezing, crashing etc. I now use PocketWiNc, version 1.3 build 952. It is a special edition put out by PC mag. I dont remember where I got it, but I am sure a search can find it. It is free but has just a couple features that dont work in the free version (that I wouldnt use anyway).
PocketWinc the Special PC Mag Edition can be found here for free...
http://www.pocketpcfreeware.com/en/index.php?soft=1052
mine wizard cant connect on network after I use wififo,so I had to hard reset and backup it and now working ok
mapas said:
you don't need to crack anything...
I travel a lot...
I need max 10min walking with wifofum to locate an unencrypted access point that shares internet... with ssid default etc...
I was in amsterdam last week. I could find open APs anywhere (even inside the room of my hotel from a nearby house/company) !
And you are not breaking any law....
If you crack wep then you do...
Click to expand...
Click to collapse
In The Netherlands you are breaking the law, well according to the new system. But if you can't protect your open wifi you are probably 99.999 of 100.000 shure you will not be seen on the network
techspy said:
I have used all of those mentioned and had problems with all of them freezing, crashing etc. I now use PocketWiNc, version 1.3 build 952. It is a special edition put out by PC mag. I dont remember where I got it, but I am sure a search can find it. It is free but has just a couple features that dont work in the free version (that I wouldnt use anyway).
Click to expand...
Click to collapse
I tried installing this on my wizard, and it said it couldnt find a wifi adapter...
jmel said:
techspy said:
I have used all of those mentioned and had problems with all of them freezing, crashing etc. I now use PocketWiNc, version 1.3 build 952. It is a special edition put out by PC mag. I dont remember where I got it, but I am sure a search can find it. It is free but has just a couple features that dont work in the free version (that I wouldnt use anyway).
Click to expand...
Click to collapse
I tried installing this on my wizard, and it said it couldnt find a wifi adapter...
Click to expand...
Click to collapse
Do you have your wifi on before starting the app?
I found streethawk out on the modaco forums and was wondering if is a viable option over hitchhiker. Anyone know anything about compatibility with wm5? Usability?
doesn't work for me just says "waiting on WCZ to be free" forever and doesn't show any networks. (or was it WSZ? i can't remember)
jamiemckee said:
doesn't work for me just says "waiting on WCZ to be free" forever and doesn't show any networks. (or was it WSZ? i can't remember)
Click to expand...
Click to collapse
Mine said the same, couldnt be arsed to try to get it working. Hitchhiker works perfectly for me.
Doesn't work here also.
Too bad....looked like a nice little app
Hitchiker always crashes after it's found the network for me. On an O2 mini s.
On my Qtek 9100 HitchHiker behaves strangely also. It usually finds half the APs WiFiFoFum does, and it NEVER connects. Also, on exiting it borks the PDA, and I have to manually remove it from memory to get things going again.
Is there anyone with a Qtek 9100 out there who has HitchHiker actually working and can suggest a reliable operating procedure?
Also, are there any other wardriving (WITH connecting feature) which actually work?
Well, I haven't tried Streethawk but it's disappointing that won't work.
I've had hitchiker running just fine on my wizard, though. I didn't do anything special but I exit just fine and while I only connect at my house it's able to do that just fine. I'll try doing a comparison sometime of the two war-drivers and see how many networks each gives me.
Couldnt get Hitchiker to work on my Wizard. Get a message about and error and the program has to close. This happens just after it has found an access point and tries to connect.
i find that WiFiFoFum works good for me, version 0.3.3.3 i think, if you go for the nicer looking version 2 then you have to install .net compact framework version 2 as well. plus if you connect a GPS unit then you can try and triangulate the signal
WiFiFoFum is great, but only to scan for APs. It doesn't have a simple way to select one of them and connect to it - or am I missing something?
bubism said:
WiFiFoFum is great, but only to scan for APs. It doesn't have a simple way to select one of them and connect to it - or am I missing something?
Click to expand...
Click to collapse
No it's true - really annoying in a multiple network area if you want to hit a specific AP.
Yes sorry i forgot that, it doesnt allow you to connect, but i did find that it logs AP even if they have only got the WEAKEST signal or you only see it for a split second so you can then go in search. if im bored i go looking for AP's using WiFiFoFum and then try to connect using a combo of 'PockLan' which allows you to ping and search a range of an IP subnet and also map a drive of a share (the mapping is abit flacky) otherwise i use RescoExplorer to map the drive bacause its good at it.
Does anyone try and connect while wardriving or are you just looking?
P.S i am still looking for a good BlueJacking software for windows mobil, for symbian there are loads of good one like BTEXPLORer and SMan
Anyone know any? apart from 'smurf'
Okay, I have spent the past few days reading different forums trying to figure out what is wrong with my wifi connection. No one can seem to find the problem. If you are up to the challenge, I would LOVE for anyone else's help.
My problem is as follows,
I got my tmobile MSD just a few days ago. I (being dumb) started messing with the connections before I read how to set them up. Now, whenever I attempt to connect through my WIFI it begins to load, then says this page can not be found. What in the world is wrong with it? I do not have a medi/data plan, so I do not want to use anything that will charge me, hince why I am attempting to use wifi. If anyone can tell me how to get this darn thing to work, I will love it! Thanks so much! have a great day
You are not giving the details needed for people to help you.
If you answer the following you may get a solution:
1) What WiFi network / hotspot are you trying to connect to?
2) Are you sure that network connects to the internet? (Other computers / devices using it?)
3) Are you sure it is not secure?
4) How did you set up your WiFi connection? (Give exact setup parameters)
5) Does the WiFi icon show connected?
6) What URL are you trying to access?
7) Can you access any other site, like google.com?
At the moment there is no way of telling where the problem is.
jessicalynn said:
Okay, I have spent the past few days reading different forums trying to figure out what is wrong with my wifi connection. No one can seem to find the problem. If you are up to the challenge, I would LOVE for anyone else's help.
My problem is as follows,
I got my tmobile MSD just a few days ago. I (being dumb) started messing with the connections before I read how to set them up. Now, whenever I attempt to connect through my WIFI it begins to load, then says this page can not be found. What in the world is wrong with it? I do not have a medi/data plan, so I do not want to use anything that will charge me, hince why I am attempting to use wifi. If anyone can tell me how to get this darn thing to work, I will love it! Thanks so much! have a great day
Click to expand...
Click to collapse
I agree with levenum... but also you could try this....
go to settings...connections....wifi...menu...remove settings. do a soft reset then.
then whenur ppc is back on again, put the wifi scaner on, find a available accessible network. u must be able to browse again. it has worked 4 me.
worse case-- hard reset
I am trying to connect to my wireless at work (it is not secure) My work computer/laptop can connect.
I have not attempted to do ANYTHING to setup my wifi. I simply turned my wifi on and it picked up the wirless connection. Yes it says it is connected. I have attempted to go to many different URLs, each says the same error message.
If i were to attempt to do a soft/hard reset how do I do that.
If you could not already tell, I am new at this enitre thing.
wiki
please then you must find out by reading the wiki what category does ur ppc fall under. alternatively read th ppc manual or look up on the internet the ppc specifications to find the rest button. usually its a tiny hole where u can insert the tip of the stylus into. that should resEt ur ppc
when i reset it, it will not mess with my SIM card will it
sim card
jessicalynn said:
when i reset it, it will not mess with my SIM card will it
Click to expand...
Click to collapse
you really are new to this aren't you, don't worry reset does not mess wth the sim card, please don't panic, I had the same prblem as u indeed, and read the WIKI
haha I am! How could you tell lol. THanks for the help!
Before you reset know this:
1) Hard reset will erase all your data and installed programs and restore the phone to factory settings i.e. OS and built in apps only!
Make sure you back it up!
(See manual for button combination, or try Settings->system->Clear storage icon if you have it to preform hard reset)
2) Soft reset (just press with stylus in reset hole) will simply reboot the device.
Neither will help if you didn't manage to connect to WiFi even before messing with your settings.
Also, see if you need to manually enter a gateway or proxy address to connect to to your work network. (This depends on the network settings)
One last thing: when your network is detected and you are asked if it connects to 'The internet' or 'Work' be sure to select 'The internet'.
Thats all I can think of at the moment...