Hi all,
I have an i-mate k-jam and I was wandering what was the best software to automaticaly connect to any open wifi.
I'm currently using WiFiFoFum2 that has a really cool radar detection and the possibility to add them as POI in TOMTOM. But it doesn't try to connect to the wifi network it found.
Do you have a good war driving prog??? (Maybe one that can try to Hack the "password protected" network)??? In general, what tool do you use for war driving???
Thanks.
I agree this would be a neat idea, especially if used with a GPS/Google maps/etc. to mark open networks. Im in Boston, and open networks are ALL over the place.
I don't know if this is a good idea.. because many networks have no encryption but they re-direct you to a web page in order to register (they check the mac addr)
The best way is to use wifofum to find networks with ssid default, linksys, usrobotics, wireless, etc...
then you can connect and check your e-mails
I can add that even on a fast machine it takes quite some time to hack 128 WEP, Let alone WPA. You need to capture about a million packets if the encryption is 128 WEP, then you can crack the code, in about an hour on a 2 ghz lappy with 512 of ram (last time I tryed =)) 64 bit WEP may be possible on a pocket pc but I cant think of anyone who would still use that. That lappy could crack that in about 5 min, with a minimal amount of packets. Nice idea though :twisted:
Later; Lew
you don't need to crack anything...
I travel a lot...
I need max 10min walking with wifofum to locate an unencrypted access point that shares internet... with ssid default etc...
I was in amsterdam last week. I could find open APs anywhere (even inside the room of my hotel from a nearby house/company) !
And you are not breaking any law....
If you crack wep then you do...
many foolish people turn on WEP or WPA and use the routers default pass key, maybe a program with a list of default keys which it tries could be useful.
The defaults keys may vary from manufacturer to manufacturer but there are lists available on the internet.
R
ameriaux said:
Hi all,
I'm currently using WiFiFoFum2 that has a really cool radar detection and the possibility to add them as POI in TOMTOM. But it doesn't try to connect to the wifi network it found.
Click to expand...
Click to collapse
Try HitchHiker 0.4 beta1 (http://www.kasuei.com/hitchhiker/) it's similar to wififofum but it will connect.
No WEP cracking or dictionary attack though.
bye
risidoro said:
ameriaux said:
Hi all,
I'm currently using WiFiFoFum2 that has a really cool radar detection and the possibility to add them as POI in TOMTOM. But it doesn't try to connect to the wifi network it found.
Click to expand...
Click to collapse
Try HitchHiker 0.4 beta1 (http://www.kasuei.com/hitchhiker/) it's similar to wififofum but it will connect.
No WEP cracking or dictionary attack though.
bye
Click to expand...
Click to collapse
Tried this - unfortunately it kept dying shortly after conecting to an available network - went back to wififofum2 - admitedly it doesnt connect but it does a good job of finding networks.
.NET 2.0 and Hitchhiker
Hitchhiker says it needs .net 2.0, and that is 24MB! Does it really need .net and how much free space does .net require? Will .net install on the sd card?
Found a cab file here:
http://forum.xda-developers.com/viewtopic.php?t=51118&highlight=net
and it is 2MB. Would still like to know if this can install on the sd card, does it screw up .net version 1, which is needed for registry wizard, and is hitchhiker worth it?
bratag : i noticed that the Hitchhiker crashed due to trying to connect using Pocket MSN. Try registering your MSN using the pocket MSN.
I did it and it works find after that
Tried Hitchhiker in WM%
and it crashed incessantly, sometimes taking the whole device down. It was a nuisance to install .net 2, although it helps to use the cab file located at
http://forum.xda-developers.com/viewtopic.php?t=51118
and then to follow the instructions involving shutting off the today screen items, soft reset, shut down all running programs (I used memmaid for this) and then install the cab. That got .net to run. Then I installed hitchhiker, but it seemed to conflict with the default wifi connection. I was near a wep enabled wifi connection of my own. Hitchhiker would accept the password and even connect me, then crash. I could still reach the internet even after it crashed, although a couple of times I had to do a soft reset because the screen wasn't responsive.
There was a report elsewhere of a t-mobile / hitchhiker problem, so perhaps it is the T-Mobile customization.
Is this really better than the native wm5 program for finding wifi's and connecting to them? Actually, often I can't connect to unprotected wifis very well, which is why I tried this program, but with 5 MB for .net and frequent crashes, it doesn't seem worth it. I would appreciate your reaction, however, since I would like to be able to use voip (sjphone) in Europe and readily connecting to wifis would help.
Yes Hitchhiker crashed for me too...
Finally I use an old version of WiFiFoFum = 0.3.3 to detect hotspot but unfortunaltely can't connect with it...
Ive tried Wi-Fi companion but it's a shareware and can't make it work on my 9100.
Does somebody has a complete list of the default ssid (maybe depend on the country)... linksys, usrobotics, wireless...
I'm really interested in the routers in France and USA.
Thanks
Wifi Companion is a pretty nice app. It has a connect option and has trace route and ping utilities as well..
http://www.socketcom.com/product/SW1221-596.asp
I have used all of those mentioned and had problems with all of them freezing, crashing etc. I now use PocketWiNc, version 1.3 build 952. It is a special edition put out by PC mag. I dont remember where I got it, but I am sure a search can find it. It is free but has just a couple features that dont work in the free version (that I wouldnt use anyway).
PocketWinc the Special PC Mag Edition can be found here for free...
http://www.pocketpcfreeware.com/en/index.php?soft=1052
mine wizard cant connect on network after I use wififo,so I had to hard reset and backup it and now working ok
mapas said:
you don't need to crack anything...
I travel a lot...
I need max 10min walking with wifofum to locate an unencrypted access point that shares internet... with ssid default etc...
I was in amsterdam last week. I could find open APs anywhere (even inside the room of my hotel from a nearby house/company) !
And you are not breaking any law....
If you crack wep then you do...
Click to expand...
Click to collapse
In The Netherlands you are breaking the law, well according to the new system. But if you can't protect your open wifi you are probably 99.999 of 100.000 shure you will not be seen on the network
techspy said:
I have used all of those mentioned and had problems with all of them freezing, crashing etc. I now use PocketWiNc, version 1.3 build 952. It is a special edition put out by PC mag. I dont remember where I got it, but I am sure a search can find it. It is free but has just a couple features that dont work in the free version (that I wouldnt use anyway).
Click to expand...
Click to collapse
I tried installing this on my wizard, and it said it couldnt find a wifi adapter...
jmel said:
techspy said:
I have used all of those mentioned and had problems with all of them freezing, crashing etc. I now use PocketWiNc, version 1.3 build 952. It is a special edition put out by PC mag. I dont remember where I got it, but I am sure a search can find it. It is free but has just a couple features that dont work in the free version (that I wouldnt use anyway).
Click to expand...
Click to collapse
I tried installing this on my wizard, and it said it couldnt find a wifi adapter...
Click to expand...
Click to collapse
Do you have your wifi on before starting the app?
Related
Hello,
I have PDA2K (integrated WIFI of course).
I don't have any WIFI at work or home. But I may want to use it
sometimes outdoors in special cafes and internet wifi areas.
I didn't get the chance to use WIFI yet.
From what I undetstand, when WIFI radio is ON, my machine will automatically detect WIFI if areas that have it and I do not even need to do a single thing.
But I came across this program WiFiFoFum. From what I understand
it is a WIFI scanner, so that if I go to urban areas, it can automatically
scan for WIFI zones with public Internet and connect me there.
My question is what's the use if WM2003SE does it automatically already?
I'm looking for an easy and fast solution.
Thanks !
sorci said:
Hello,
I have PDA2K (integrated WIFI of course).
I don't have any WIFI at work or home. But I may want to use it
sometimes outdoors in special cafes and internet wifi areas.
I didn't get the chance to use WIFI yet.
From what I undetstand, when WIFI radio is ON, my machine will automatically detect WIFI if areas that have it and I do not even need to do a single thing.
But I came across this program WiFiFoFum. From what I understand
it is a WIFI scanner, so that if I go to urban areas, it can automatically
scan for WIFI zones with public Internet and connect me there.
My question is what's the use if WM2003SE does it automatically already?
I'm looking for an easy and fast solution.
Thanks !
Click to expand...
Click to collapse
wififofum give you a list of all the AP's near you with there SSID and the SNR (signal strenght in db) and tells you if there encypted etc. the windows one is like XP zero config, it just pops up whenever it finds one and lets you connect to it, with a scanner you are scanning and not connecting,but it may give you the option to connect (perhaps when you find an open AP)
you should check out PocketWinCE, its my fav IMO, also check others like ministumbler but this probly wont work.
scanners (uses legally) are good to walk around your company premises to check for rouge AP's etx, illegally it can be used to find open AP that you could use to access internet email or anything TCP really,
I took a 5 km drive one day..
Windows came up with four different findings for connections..
WiFiFoFum found 24...
That's a 6:1 ratio for WFFF...
And at only a few hundred k.. ..install it and enjoy..
Bonzo said:
I took a 5 km drive one day..
Windows came up with four different findings for connections..
WiFiFoFum found 24...
That's a 6:1 ratio for WFFF...
And at only a few hundred k.. ..install it and enjoy..
Click to expand...
Click to collapse
around and about glasgow you find loads and loads of AP's and many are unencrypted and unopened,
check out pocket lan, this goes great with wireless networking, you can map printers, shares, and much much more but i wont go into that as i doubt its gonna be used legally (in most cases)
COOL Thank you all guys for good info.
So what's the verdict for a good program that doesn't require
hours of tweakings and techie games to use ? Something simple
that will get the job done ?
Also are Encryped channels really encrypted? I mean, when surfing from an coffee shop that has WIFI, how can I be sure that my communication is totally encrypted and that no simple software sniffer can get catch all the data? OR maybe even hack my pocket pc ?
I thought about the WiFiFoFum as it's the first one I came accross with, but let's hear your choices for my goals (i.e. probably onle to catch wifi zones on t he streets) + sharing etc... would be nice.. disregard the price of the utility, i'm interested in performance.
Thanks guys!
WiFiFo Fum is the best..
It's simple to use, requires little memory, and can be used to connect to the AP's it finds..
As for encryption..
No, there is no WiFi network in the world that is secure..
The way ethernet is buildt, everyone with a very simple sniffer can download ALL your data stream..
As for security.. With WEP encryption, they will need roughly 4 to 6 GB of data before they can crack it and get any information from the data stream..
Don't be paranoid!
If you wanna check that it works, go stand outside PC world, or McSh1te and get WiFiForUm to do some sniffing.
You are right when you say that it 'should just work' unfortunately, though MS wrote windows mobile so it likely wont! If you dont find any hotspots when you think there should be some try a soft restart (my XDA IIs requires this swapping from work-->home AP, but not for Home-->work AP very odd.
Of course the AP's at PC world/mcsh1te will be btopenzone or thecloud ap's which means that it costs approximately 5 million pounds per hour to use them. But if you can sniff them and get to the appropriate 'give us your c/card page' then you've proven that the device works. Check out the btopenzone/thecloud websites for their login url's.
If they ever start being honest and offering a per MB tarriff at hotspots then I'll start using them.
Nigel
veletron said:
If you wanna check that it works, go stand outside PC world, or McSh1te and get WiFiForUm to do some sniffing.
You are right when you say that it 'should just work' unfortunately, though MS wrote windows mobile so it likely wont! If you dont find any hotspots when you think there should be some try a soft restart (my XDA IIs requires this swapping from work-->home AP, but not for Home-->work AP very odd.
Of course the AP's at PC world/mcsh1te will be btopenzone or thecloud ap's which means that it costs approximately 5 million pounds per hour to use them. But if you can sniff them and get to the appropriate 'give us your c/card page' then you've proven that the device works. Check out the btopenzone/thecloud websites for their login url's.
If they ever start being honest and offering a per MB tarriff at hotspots then I'll start using them.
Nigel
Click to expand...
Click to collapse
tha scots knows all!! haha
thanks for all replies.
I downloaded the latest version of the program (0.3.3 i think)
Couldn't understand it or get it to work properly, it seems designed towards network technicians, not some normal pc/pda freak.
several issues:
1) When I go in urban areas, it does show on the Radar many spots, but the machine's own notification of 'Do you want to use xxxx for connecting to internet or work' dialog is interrupting it, and it starts to be a 'concert' of the WiFiFum and the internal network programs making noise.
2) When I did see many spots and tried to connect to some of them in the list screen(Try to tap and hold on the radar screen does ****) , it doesn't do ****. I click on Connect and no other dialog box or anything shows me as connected or something. Very akward program I must say. I also don't see in the list something which says if a spot is private or public (i.e. anonymous internet access allowed). And even not any help file. Seems like no human engineering was made here. I'd rather buy a program and pay nicely if it works rather than getting even a freeware which simply doesn't work.
Any other suggestion for other light programs that can actually work are very welcomed..
thanks again guys.
I think the problem might be between the stylus and the screen..
WiFiFoFum works flawlessly..
And please, forget about using the radar..
It will not work properly until you use TWO wifi cards..
When you see the list, tap and hold any AP to bring up a "Connect" option.
Now, you must remember; WFFF discovers EVERYTHING!
WM2003 only lets you connect to AP's that meets certain demands. (Signal strength is one)
I firmly believe that WFFF is the best software out there, just like NetStumbler is for Win32 environments..
I find it easy to use, and provides all the information I need..
How do you propose that the software can find out if you must pay before using it or not?
I guess this could be solved by connecting, pinging google, disconnecting and marking as "Public"/"Private"...
Though this would slow down the whole process so much, It would not be usable for anything else...
The concert can be disabled by the options panel, or just turning off the sound..
Sadly, we can't disable the WM2003 settings..
Street Hawk tries to connect to google so you know if the connection works.
I found streethawk out on the modaco forums and was wondering if is a viable option over hitchhiker. Anyone know anything about compatibility with wm5? Usability?
doesn't work for me just says "waiting on WCZ to be free" forever and doesn't show any networks. (or was it WSZ? i can't remember)
jamiemckee said:
doesn't work for me just says "waiting on WCZ to be free" forever and doesn't show any networks. (or was it WSZ? i can't remember)
Click to expand...
Click to collapse
Mine said the same, couldnt be arsed to try to get it working. Hitchhiker works perfectly for me.
Doesn't work here also.
Too bad....looked like a nice little app
Hitchiker always crashes after it's found the network for me. On an O2 mini s.
On my Qtek 9100 HitchHiker behaves strangely also. It usually finds half the APs WiFiFoFum does, and it NEVER connects. Also, on exiting it borks the PDA, and I have to manually remove it from memory to get things going again.
Is there anyone with a Qtek 9100 out there who has HitchHiker actually working and can suggest a reliable operating procedure?
Also, are there any other wardriving (WITH connecting feature) which actually work?
Well, I haven't tried Streethawk but it's disappointing that won't work.
I've had hitchiker running just fine on my wizard, though. I didn't do anything special but I exit just fine and while I only connect at my house it's able to do that just fine. I'll try doing a comparison sometime of the two war-drivers and see how many networks each gives me.
Couldnt get Hitchiker to work on my Wizard. Get a message about and error and the program has to close. This happens just after it has found an access point and tries to connect.
i find that WiFiFoFum works good for me, version 0.3.3.3 i think, if you go for the nicer looking version 2 then you have to install .net compact framework version 2 as well. plus if you connect a GPS unit then you can try and triangulate the signal
WiFiFoFum is great, but only to scan for APs. It doesn't have a simple way to select one of them and connect to it - or am I missing something?
bubism said:
WiFiFoFum is great, but only to scan for APs. It doesn't have a simple way to select one of them and connect to it - or am I missing something?
Click to expand...
Click to collapse
No it's true - really annoying in a multiple network area if you want to hit a specific AP.
Yes sorry i forgot that, it doesnt allow you to connect, but i did find that it logs AP even if they have only got the WEAKEST signal or you only see it for a split second so you can then go in search. if im bored i go looking for AP's using WiFiFoFum and then try to connect using a combo of 'PockLan' which allows you to ping and search a range of an IP subnet and also map a drive of a share (the mapping is abit flacky) otherwise i use RescoExplorer to map the drive bacause its good at it.
Does anyone try and connect while wardriving or are you just looking?
P.S i am still looking for a good BlueJacking software for windows mobil, for symbian there are loads of good one like BTEXPLORer and SMan
Anyone know any? apart from 'smurf'
In the place I live there are too many available Wi-Fi connection and my device keeps switching from one to another! I can't use any wi-fi based application because it is always renovating the IP number thus making drop each connection. Is there a way to make dedicated connection to a single Wireless Lan?
Folke said:
In the place I live there are too many available Wi-Fi connection and my device keeps switching from one to another! I can't use any wi-fi based application because it is always renovating the IP number thus making drop each connection. Is there a way to make dedicated connection to a single Wireless Lan?
Click to expand...
Click to collapse
There is likely to be a few ways to do this . I use an application called Hitchhiker. Mainly used to seek out Wifi hotspots and assist in connecting to them. But it has an option that lets you set up TRUSTED networks and will allow connection to them only. Can also be set to auto connect to first available trusted network. Handy when you are surrounded by networks. There is a link below. (you will also net the .net compact framework installed and there is a link for tis on the Hitchhiker page below)
http://www.kasuei.com/hitchhiker/
Mike
Mike, you are one of the few people I've heard who have got hitcher to work OK ..... mine crashed ....but I am on An orbit / Artemis). Before I 100% Blame Hitchhicker, I also got an error message on installing .net 2 ... but otherwise seemed OK. I did a search on 'Hitchhiker' and .. got some VERY bad feedback - people having their systems trashed by it. So decided to uninstall both it and .net2.
to be safe.
Do you have ansy tips for a succesfull install and use ?
I feel the .net2 is an unhelpful overhead - a developer tool - not nec reliable (or for normal mortals ;-) ).
As an alternative I found pocketWinc ... which seems to offer much the same, without .net2, and (and the hype ?). I've not tried it yet but will let you know.
I'll be interested to hear how you get on with that app. As far as Hitchhiker goes - I did nothing special. I've installed .net and Hitchhiker twice and no problems each time - Except on both occasions hitchiker reported an error on first running until after a soft reset - after that no problems. Regarding .net - I installed it as a few apps. need it otherwise I do nothing with it. Some folks say it's memory greedy - perhaps it is but not giving me any probs.
Cheers
Mike
I'm looking for some (inexpensive) software to detect wireless networks. Can anyone recommend a good scanning program for my Vario II?
Cheers.
Bobby
bobbyelliott said:
I'm looking for some (inexpensive) software to detect wireless networks. Can anyone recommend a good scanning program for my Vario II?
Cheers.
Bobby
Click to expand...
Click to collapse
I like Hitchhiker - scans and assists in connection to hotspots.
Also like Wififofum - has a nice radar type screen as an option or just lists networks and details. Does not connect to networks just shows them.
Both above require the .net cf framework 2 to be installed as well
Both are freeware
http://www.kasuei.com/hitchhiker/
http://www.aspecto-software.com/rw/applications/wififofum/index.html
Sometimes Hitchhiker shows an error on very first start up but ignore it and possible soft reset and should be fine from then on.
Mike
The best WiFi scanner
I found this freeware on 8525software.com. Its called WiFiFoFum. I think this is what you're looking for. http://www.8525software.com/component/option,com_remository/Itemid,27/func,select/id,4/
WiFiFoFum is best
I've a collection of 18 wifi programs, i've tried all of them.
Hitchhiker is good, not invasive like WiFi Companion.
To capture Packets, Airscanner mobile sniffer is the best, but seems that promiscous mode doesn't work on hermes.
SkizZO said:
Hitchhiker is good, not invasive like WiFi Companion.
Click to expand...
Click to collapse
I was tempted to purchase wi-fi Companion (it looks great). What do you mean by "invasive"?
Cheers.
Tryed Hitchhicker on WM6 and got a MemoryException Error...
Murcielago said:
Tryed Hitchhicker on WM6 and got a MemoryException Error...
Click to expand...
Click to collapse
Even under wm5 it has a habit of giving this error at first installation. Worth a soft reset and retry.
Mike
has anybody managed to use Hitchhiker on WM6?
I just installed WM6 and for some reason hitch hiker will start, it will find a network, connect and then error and result in me having to do a soft reset.
this program is amazing and MUCH needed since i need to connect wirelessly anywhere i am.
is there a way to get this to work?
Hi, Im using WiFi Companion, howerver the WiFi signal reception is very weak as it shows only 1-2mbps, btw im connecting at my on LAN .
Anyway to improve reception? Thanks in advance!
bt0904 said:
Hi, Im using WiFi Companion, howerver the WiFi signal reception is very weak as it shows only 1-2mbps, btw im connecting at my on LAN .
Anyway to improve reception? Thanks in advance!
Click to expand...
Click to collapse
Sorry forget to mentioned that i have set the Wlan to "G" on my pocket PC but still no avail.
Hitchhiker on WM6?
Bt: the companion keeps low power on the wlan to save energy, so that's the reason you see only 1-2 mbps, just give more gear on the net and the speed will go higher.
Any news on Hitchhiker or another program with such functionality working well on WM6?? I don't think WFFF do such great job, does it try to connect and resolve net address once discovered a new network?
artkill said:
Bt: the companion keeps low power on the wlan to save energy, so that's the reason you see only 1-2 mbps, just give more gear on the net and the speed will go higher.
Any news on Hitchhiker or another program with such functionality working well on WM6?? I don't think WFFF do such great job, does it try to connect and resolve net address once discovered a new network?
Click to expand...
Click to collapse
I don't have news on Hitch and WM6. But WFFF does not assist with the connection. Nice looking radar screen that can give true radar if GPS sotware is in use - other than that if it's something that provides a connection then WFFF is not the one for you. (Curiously a long time ago the developer did have an option to connect but abandoned the option for technical reasons).
Mike
Netbox works with WM6
So i installed hitchhiker and ran the app, it started smoothly, found my work wireless network, and connected to it! I was so happy because ive been having issues using wifi anywhere but at home.
So when i went to close the application down ( just hitting the x) it threw an error and froze my PPC.
Is this because i was using Hitchhiker 4.0 Beta on WM6? should i downgrade the program to 0.32?
Or is there any other programs that seek out wifi signals and assist with connecting just as hitchhiker does.
Any assistance would be greatly appreciated!
-Matthew
newnoise1024 said:
So i installed hitchhiker and ran the app, it started smoothly, found my work wireless network, and connected to it! I was so happy because ive been having issues using wifi anywhere but at home.
So when i went to close the application down ( just hitting the x) it threw an error and froze my PPC.
Is this because i was using Hitchhiker 4.0 Beta on WM6? should i downgrade the program to 0.32?
Or is there any other programs that seek out wifi signals and assist with connecting just as hitchhiker does.
Any assistance would be greatly appreciated!
-Matthew
Click to expand...
Click to collapse
Well as you know some others have had problems with WM6. However some folks had issues with WM5 - though I never have.
You do not say if you tried it again after that first time it crashed on closing? If not try again. Quite often after first installation it may show a memory exception error but it's worth trying again. As you say it is a superb help at obtaining that connection. You should know though that Hitchiker saves it's settings and you may find that you can succesfully connect without the application having once used Hitchiker to make the first connection. Hitchhiker is also good because it allows you to cut and paste long WEP keys - this is not permitted in WM5 native application.
Mike
I tried about 6 times, both with versions 4.0 beta and 0.32.
And now it wont connect to that network? I was surprised on how fast and efficient this program is, it connected to the network without any problems, (aside from crashing afterwards) and now it wont connect at all, and it's not crashing anymore!
I'm using Pro Black 2.0 Is there a more stable version of WM6?
same problem here. program is nice - if work. but work only few minutes, before crash. I tested it only on WM6, not WM5. Till now I did not find any way how to "repair" this problem. Nevermind, I using WiFi occasionally and I have two same AP´s on different places with the same settings (it is more as 300 Km between this places) so I need set only one settings in wifi control panel.