Okay, I have spent the past few days reading different forums trying to figure out what is wrong with my wifi connection. No one can seem to find the problem. If you are up to the challenge, I would LOVE for anyone else's help.
My problem is as follows,
I got my tmobile MSD just a few days ago. I (being dumb) started messing with the connections before I read how to set them up. Now, whenever I attempt to connect through my WIFI it begins to load, then says this page can not be found. What in the world is wrong with it? I do not have a medi/data plan, so I do not want to use anything that will charge me, hince why I am attempting to use wifi. If anyone can tell me how to get this darn thing to work, I will love it! Thanks so much! have a great day
You are not giving the details needed for people to help you.
If you answer the following you may get a solution:
1) What WiFi network / hotspot are you trying to connect to?
2) Are you sure that network connects to the internet? (Other computers / devices using it?)
3) Are you sure it is not secure?
4) How did you set up your WiFi connection? (Give exact setup parameters)
5) Does the WiFi icon show connected?
6) What URL are you trying to access?
7) Can you access any other site, like google.com?
At the moment there is no way of telling where the problem is.
jessicalynn said:
Okay, I have spent the past few days reading different forums trying to figure out what is wrong with my wifi connection. No one can seem to find the problem. If you are up to the challenge, I would LOVE for anyone else's help.
My problem is as follows,
I got my tmobile MSD just a few days ago. I (being dumb) started messing with the connections before I read how to set them up. Now, whenever I attempt to connect through my WIFI it begins to load, then says this page can not be found. What in the world is wrong with it? I do not have a medi/data plan, so I do not want to use anything that will charge me, hince why I am attempting to use wifi. If anyone can tell me how to get this darn thing to work, I will love it! Thanks so much! have a great day
Click to expand...
Click to collapse
I agree with levenum... but also you could try this....
go to settings...connections....wifi...menu...remove settings. do a soft reset then.
then whenur ppc is back on again, put the wifi scaner on, find a available accessible network. u must be able to browse again. it has worked 4 me.
worse case-- hard reset
I am trying to connect to my wireless at work (it is not secure) My work computer/laptop can connect.
I have not attempted to do ANYTHING to setup my wifi. I simply turned my wifi on and it picked up the wirless connection. Yes it says it is connected. I have attempted to go to many different URLs, each says the same error message.
If i were to attempt to do a soft/hard reset how do I do that.
If you could not already tell, I am new at this enitre thing.
wiki
please then you must find out by reading the wiki what category does ur ppc fall under. alternatively read th ppc manual or look up on the internet the ppc specifications to find the rest button. usually its a tiny hole where u can insert the tip of the stylus into. that should resEt ur ppc
when i reset it, it will not mess with my SIM card will it
sim card
jessicalynn said:
when i reset it, it will not mess with my SIM card will it
Click to expand...
Click to collapse
you really are new to this aren't you, don't worry reset does not mess wth the sim card, please don't panic, I had the same prblem as u indeed, and read the WIKI
haha I am! How could you tell lol. THanks for the help!
Before you reset know this:
1) Hard reset will erase all your data and installed programs and restore the phone to factory settings i.e. OS and built in apps only!
Make sure you back it up!
(See manual for button combination, or try Settings->system->Clear storage icon if you have it to preform hard reset)
2) Soft reset (just press with stylus in reset hole) will simply reboot the device.
Neither will help if you didn't manage to connect to WiFi even before messing with your settings.
Also, see if you need to manually enter a gateway or proxy address to connect to to your work network. (This depends on the network settings)
One last thing: when your network is detected and you are asked if it connects to 'The internet' or 'Work' be sure to select 'The internet'.
Thats all I can think of at the moment...
Related
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
danrw84 said:
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Does wifi turn on? (Does the left LED blink like it does when wifi is turned on?)
If not, then it could be related to a cingular cab - did you install any of the cabs from the original cingular extended rom?
left led does blink.
ive also gotten as far as picking up a network.
i have tried everything, i cannot get my wifi to work at all. i dont know whats up.
the settings i needed (which i replicated for the new rom) on the old rom, was this
I would select networks, MY work network, this connects to the internet.
then in the WLAN adapter i had to manual enter my dns servers.
thats pretty much it to get it to work, but now with this rom it wont
Similar or different problem? Not sure. PARTLY SOLVED!
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Hi NG,
I updated my O2 XDA mini s (German) from OS 1.3.4.2 to 2.16.9.1. (Radio 02.07.10 included). To be honest, I was never really happy with the quality and reliabilty of the radio. 4 out of 5 times it did work, but once in a while, especially while roaming, it gave me a headache. After unlocking and updating to the new version, WLAN looks to be working quite well, at least for connecting to access points, but it seems that it can't browse external websites. VXutils give back a socket error trying to access external (outside my home network) websites/Email.
Internal (inside my home network) connections work like a charm. Termincal Services client accesses my Win2003 Server no problem and I can also connect to a website hosted on my internal server. (http://servername:port).
Whenever I try to connect to external sources, the browser stops afer not successfully "locating" the respective server. On the other hand locating might not be the problem. Performing a ping to an external site with VXutils properly picks up the right ip address but cannot send/receive ping!
GPRS works as supposed. Can connect to sites with no problem.
May be somebody experiences the same problem or, even better, has a solution.
By the way I used @Work for all possible settings. The work profile is set up for both connection types.
Besides that, the new rom is really nice
EDIT Well after some time playing around, I have solved the problem or better the problem partly disapeared. In 'Settings' 'Network Adapters' I switched from Use server-assigned IP address to manual and entered IP, DNS, Gateway, etc. With these settings it everything worked after a soft-reset. Going back to DHCP and soft-reset, it first worked an now it doesn't anymore. At least there is a work around and I'm trying now some other things. All machines currently work with the DHCP settings correct. I will check and keep you updated if the problems comes from Server settings or from something in the PDA EDIT
Lars
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.[/quote]
Darn it. I did. I'll re-wipe and not load the 54g upgrade. Thx.
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
no i didnt load anything
but i want this wifi to work! what the heck!!
try this
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
Danrw. Concerning the registry settings, after patching the os I did change the registry settings. One already existed with the right value as shown in the 802.11g thread. The other one, DotG, I added.
After that, it did pick up a only G router!
As far as setting DNS manually. It is not enough to just cange the dns setting. You have to enter all the information and even after a soft-reset it takes some time to have the settings picked up... Use vxUTIL 'Info'-Screen to check the current settings. I did test wlan before and after applying packages from the extended rom. No change on reliability or performance on WLAN IMHO.
As far as I understand. Your problem is actually connecting to the router/Access Point. For testing please disable all security on your router and do a soft-reset before trying to access. Also since we have heard of several problems with model 9100 not realizing if an access point is available or not. Also change the SSID of your router and if possible the MAC Address of the router.
Don't forget to soft-reset and first try SDIO Adapter inyour pda with auto IP/DNS/etc. settings.
Another thought. Embarassing, but once I messed around with trying to get a new pda online and forgot to disable the mac filter settings in the router, which resulted in being able to see the active router but it didn't let me connect. After those two days I was missing a lot of hair.
Good luck
Lars
summiter said:
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
Click to expand...
Click to collapse
I did but only the minimum. I trimmed down their install to the basics. I narrowed it down to one of two CABs. Either the gprsstall or EnableEONS. I didn't install either of those and I"m now back up and running. Of course, I still can't get it to prefer WiFi to EDGE.
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
eb said:
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
Click to expand...
Click to collapse
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks[/quote]
I do not know if my solution will work for you because I upgraded my rom to 2.16 but lets give it a try. I use d-link DI-524 wifi router. Start menu > Settings > Connections (tab) > Network Cards [I must admit earlier today when I was trying to connect my k-jam to the wifi, I did get as far as it asking me for my authentication code and afterwards it timed-out] --> select your wifi network [at this moment as I'm trying this out my wifi on my k-jam is off] --> Network Key (tab) > it was the key index that I had to change from 1 to 2. Before doing this though, go to your router's wireless configuration page through your webbrowser and make sure the keyX (it looks for d-link this can be from key1 to key4 or at least on mine) and make sure the key index you select on your mda is the same number that is used on your router for code authentication.
Also I noticed after resetting my k-jam that I could get connected to my wifi but I could not surf, in wifi setting on my k-jam I had to hit renew ip and then I was able to surf.
I hope this works for you. Good luck and many late nights.
no luck with this for me
even tried removing wep all together. tried multiple routers.
i can detect the ssid's, but i cant connect to them. times out on the connect.
Mine worked no problem...you may already have had this suggestion but here was my process.
Unlocked with lokwiz
Upgraded
Reset before extended ROM apps installed
Installed total commander
deleted extended ROM
Upgraded again
i re-installed the CINGULAR ROM and WiFi works like a charm
......any clues?
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
kristiandg said:
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
Click to expand...
Click to collapse
What does timestyle and wifirate4 do? I don't have these installed and haven't seen any problems.
so please forgive me if I'm asking this for the umpteenth time, but my searches have proven futile, I can't seem to find the answers I need...
I have a cingular 8125 and can't connect to my wireless network even though I'm 1 ft away, it says it's unavailable, even though I'm surfing the web on my computer using that same connection...
I'm running WM6...
does your device recornize your network?
try connecting using "work"
wolvarine said:
so please forgive me if I'm asking this for the umpteenth time, but my searches have proven futile, I can't seem to find the answers I need...
I have a cingular 8125 and can't connect to my wireless network even though I'm 1 ft away, it says it's unavailable, even though I'm surfing the web on my computer using that same connection...
I'm running WM6...
Click to expand...
Click to collapse
sometimes you just have to click on the unavailabe thing, and then it starts connecting, if it doenst say connected then you probably have to reset your modem, its normally that when a new device wants to connect to a wireless modem it first has to be resetted, often there is a special button dedicated for this.
another solution is to check if you entered the wlan name or whatever it is called correct and the settings are well set. and maybe you need a key to enter the secure network, becuz wm doesnt say anything if the key is wrong
cheerz!
Go into wireless settings, see if your hub is being recognized. Also, if it is encrypted, make sure you entered the pass correctly. Mine sometimes does that, and it usually (for me) is that I entered the kajillion number pass wrong. Sometimes I have to reset my wifi, and reboot my phone, then it will read.
thanks for all the suggestions, I have tried to uncheck the IEEE 802.1x network access control, but all I get is a ping and it won't let me uncheck it, a friend with the same phone told me I have to get the checkmark out of this box, or my wifi won't work, could this be why I can't get connected...?
Hey guys, i have flashed to a few ROMs in the past and my phone would always give me the trouble of no data connection. My tmobile wing is hard spl and running currently on papa's black diamond. whenever i tried to go to the comm manager to activate the data connection, it just wont turn on while other buttons i have no problem turning on such as wlan and bluetooth.
i've also tried launching internet but it just says there's no data connection and ask me to go to settings. i still can make calls but just completely no data connections. i have also soft resetted it several time and no luck. =/
help would be great!
ps. i've looked up several other threads with the same problem, however, theres really nothing under connections except add new so it didnt help much.
cbbplanet said:
Hey guys, i have flashed to a few ROMs in the past and my phone would always give me the trouble of no data connection. My tmobile wing is hard spl and running currently on papa's black diamond. whenever i tried to go to the comm manager to activate the data connection, it just wont turn on while other buttons i have no problem turning on such as wlan and bluetooth.
i've also tried launching internet but it just says there's no data connection and ask me to go to settings. i still can make calls but just completely no data connections. i have also soft resetted it several time and no luck. =/
help would be great!
ps. i've looked up several other threads with the same problem, however, theres really nothing under connections except add new so it didnt help much.
Click to expand...
Click to collapse
AHHHHHHHHHHHHHHHHHHHHHHHHHHAAAAAAAAAAAAAAAAAAAHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHAAAAAAAAAAAAAAAA!
cbbplanet said:
Hey guys, i have flashed to a few ROMs in the past and my phone would always give me the trouble of no data connection. My tmobile wing is hard spl and running currently on papa's black diamond. whenever i tried to go to the comm manager to activate the data connection, it just wont turn on while other buttons i have no problem turning on such as wlan and bluetooth.
i've also tried launching internet but it just says there's no data connection and ask me to go to settings. i still can make calls but just completely no data connections. i have also soft resetted it several time and no luck. =/
help would be great!
ps. i've looked up several other threads with the same problem, however, theres really nothing under connections except add new so it didnt help much.
Click to expand...
Click to collapse
I think you have to use the Network Wizard. If it is not in that rom, can install it using the cab, it's should be around this forum.
thanks live! but i'm not sure which network wizard cab file works and which doesnt.. so a friend helped me set it up manually. thanks though!!
papamopps said:
AHHHHHHHHHHHHHHHHHHHHHHHHHHAAAAAAAAAAAAAAAAAAAHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHAAAAAAAAAAAAAAAA!
Click to expand...
Click to collapse
What, have you heard that question before?
Ryan
yes my fone is having the same problem and now i cant flash to a new rom
i flashed for the first time yesterday, and had the same problem. just call tmobile and tell them somehow your data connection information has deleted, and they will run u through what to put in the fields. and don't forget to go to the network wizard, to make sure its on the right network.
Same problem except it WAS working (my gprs/edge) until I added my first wlan entry.. of my apartment's wifi which works. But after I was done using it i turned the wlan off from comm manager and expected to see the big E for edge and instead just see the two arrows with the little x under it. I can no longer connect to gprs/edge. If i open the internet explorer to view a page, it flashes a "G" with the arrows like it's trying to connect forever. At that point it will not even let me make or receive calls until I reboot the ppc. Network wizard won't fix it as I've already tried, twice... no change. My data connection for T-mobile is set up already under "connections tab" but it just doesn't work. My best guess is something has gone wrong in the registry... but as much as I've searched for this kind of problem I find nothing... just stuff how to fix wlan problems. btw, i'm on tmobile. Oh, it won't even activesync if my wlan is off now... I have to enable the wlan and let it connect to my home network... and THEN it will go through activesync without error. This is nuts, I already hard resetted once because of this and now it's the same story. Maybe it's just a prob with the opentouch 6.5 nofrills version that's just basic and let's the users add their own apps.
Bought my Galaxy yesterday and it works fine but on one point. Yesterday I was able to find the home network of my friend in his house. I could connect to the internet with that as well as through 3g. But later at my place it does not work with any home network. When I try Settings, Wireless and network, Wi-Fi settings and Wi-Fi, the phone turns on Wi-Fi and scans for some seconds and the leaves a message that says "Unable to scan networks".
Maybe I have switched on or off something accidentally as I am a new user on this phone? Anyone for help?
turn off the phone
then turn it back on
in another words, reboot your phone, seems like it got stuck in some WiFi bug
It does not seem to help. I even took out the battery. Still unable to to scan
you can try this
*2767*3855# WARNING! FACTORY DATA WIPE AND RESET as soon as you enter the last # use it only if you want to clean wipe your phone
more over here
http://forum.xda-developers.com/showthread.php?t=721111
I really don't want that as long as I also cannot backup the video in it. Have not got the Kies program to recognize the phone yet.
Maybe there is another way to set the scan possibility?
roffie said:
I really don't want that as long as I also cannot backup the video in it. Have not got the Kies program to recognize the phone yet.
Maybe there is another way to set the scan possibility?
Click to expand...
Click to collapse
you don't need kies
see the last secret code?
It defaults to User space. I do not yet have any extra Micro SD card. Is it that what means with User space?
Tried that last command and do have at least one file of each in the folders, but the phone answers for each of them that the files are not ready? What else is there to be done?
Had same problem, tried factory reset... didn't solve it. any ideas? it can't get an ip address and it used to work
probably the next best thing is to use Odin to reflash the modem file to the phone
or a full flash to the latest firmware
Same problem appeared on my SGS. Boy this sucks. The wifi became "hard" to connect sometimes. Or I could connect but had no internet access. Then I disconnect and connect several times to have net access.
One hour ago the wifi died. I turn it on it says "Unable to search for networks" and shuts itself off.
WTF. I have to reflash!!!! Not good. Also I don't know what caused this. I'm on JM2 with One Click Lag fix 2.1
one thing is for sure, the STOCK rom has no problem with that
so it is either a Router thing, or a firmware specific problem
format said:
Same problem appeared on my SGS. Boy this sucks. The wifi became "hard" to connect sometimes. Or I could connect but had no internet access. Then I disconnect and connect several times to have net access.
One hour ago the wifi died. I turn it on it says "Unable to search for networks" and shuts itself off.
WTF. I have to reflash!!!! Not good. Also I don't know what caused this. I'm on JM2 with One Click Lag fix 2.1
Click to expand...
Click to collapse
JM2 isn't a final release firmware. Realistically, if you want everything (well, other than GPS) to "just work", stick to official firmware.
Well, I for one, have only the the official firmware and it is the latest one what I have learned. Still the phone behaves as in my original post after just a couple of hours. Is this and other peoples beautiful Samsung Galaxy model not tested enough by Samsung? Has anyone more information than we have?
AllGamer said:
probably the next best thing is to use Odin to reflash the modem file to the phone
or a full flash to the latest firmware
Click to expand...
Click to collapse
I agree thats Help me. or you can try upload update.zip (file to make root) on your device and flash that can help too.
Hi all! Thank you for your inputs to my problem. I have now got it working. For those who are interested how, I can tell you that I only did a simple Factory Reset command.
problem solved!
I had the same problem.
I was trying to configure a invisible ssid and by distraction I created a normal WPA 2 network, ending up with two networks with the same ssid (when I was turning off the wifi, it wouldn't go off at the first try, weird, )
Solution:
Edit the "/data/wifi/bcm_supp.conf" (with root permission) and eliminate the duplicated network, problem solved! At least in my case (no need for factory reset )
http://forum.xda-developers.com/showthread.php?t=757619
.. and still cant get an answer.
Without wifi the device is useless to me.
I can see the networks, just not connect to anything.
I have the latest radio.
It worked on first setup but after restart ive lost the ability to connect.
Somoene mentioned that the MAC address is assigned randomly each time the device restarts which seems very odd.
Does anyone know of a fix for this before I give up and go back to 6.5?
This forum is becoming incredibly difficult to find information!
Same thing hapened to me...after unlocking, modifying registry and activating the phone, wi-fi stopped working. It sees the network...very good signal, but it says that it can't reach it...I tried a few restarts, but nothing. Hope somebody will fix this....thanks in advance
Will I be able to use the same activation key again if I reset the phone from settings/about ? I mean....I could try this to see if the the unlocking or the registry modification caused this...
This happened to me, too. It started working after I pulled the battery and went through the new phone setup thing.
xandercom said:
.. and still cant get an answer.
Without wifi the device is useless to me.
I can see the networks, just not connect to anything.
I have the latest radio.
It worked on first setup but after restart ive lost the ability to connect.
Somoene mentioned that the MAC address is assigned randomly each time the device restarts which seems very odd.
Does anyone know of a fix for this before I give up and go back to 6.5?
This forum is becoming incredibly difficult to find information!
Click to expand...
Click to collapse
turn off the device, take off your micro sd and turn on the device. you'll see that all your settings and customizations are gone. turn off the device again, put back your sd card and turn on the device. NOW you should be able to connect to wifi access points!
yeah I know, it sounds weird but it worked for me..