Database Users

download xpu scalar (speed up ur ppc to 530 mhz) for free

try this to speed up your pocket pc, good programs , try for xda II at 530 mhz

I would have prefered you post all the warnings of using such utlity ... for some unexperienced users this could permanently damage their devices.
For all folks here ... pay all attention to the heat while working on high speeds ... and don't ever try ROM flashing on any speed but the default one (206 for XDA and 400 for XDA II)

Ive been running Gameboy Advance and SNES roms, using XPU scalar @ 530Mhz for hours and hours. The device gets VERY hot after 5 hours, but it still fights on without a restart...
Although, ive tried other clocking apps @ 600mhz and then it got so hot it restarted itself...

I use Pocket Hack Master and have had my device up to 1689Mhz without any ill effects, though this is apparently unusually quick for an XdaII - the SDRAM usually can't handle 147MHz.
With PHM, mine scales between 399MHz and 589MHz depending purely on load, I've been using it for about three months with no apparent problems.

I tried it on i-mate ... the device is frozen if I use 530 MHz

Mine runs fine at 530 and 473... I even did a benchmark in BetaPlayer; huge improvement at 530; however, I decided to back it off to 400 to save on batteries.

Biso007 said:
I tried it on i-mate ... the device is frozen if I use 530 MHz
Click to expand...
Click to collapse
Probably the SDRAM can't handle the 133MHz - it's the first thing that usually falls over. You could put the multiplier down to 1/2x from 1x and it would probably work but that would mean your RAM was only running at 66MHz.

ok i must be real tired...
how the heck do you install this program from those files??

Questions :
- At 472 MHz as well as at 530 MHz, the memory is underclocked (50 - 66 MHz). I ask if it would be possible to maintain the memory around 100 MHz (+/- 10 MHz) during the overclock.
- Does the XScale CPU have the frequency fixed at 400 MHz ? Intel didn't think to dinamical frequence switch ? (like in Centrino or P4M) ? Because if not, then this software would allow battery economy. But it's weird, Intel wasn't able to do the same thing ???

With PHM you can choose whether to 1/2x or 1x clock the SDRAM and the LCD. I use 1x, so when I'm running the CPU at 590, the memory is running at 147MHz, most Xda II's won't handle this but it appears I was really lucky and got very good RAM in mine.

Mi_ said:
Questions :
- At 472 MHz as well as at 530 MHz, the memory is underclocked (50 - 66 MHz). I ask if it would be possible to maintain the memory around 100 MHz (+/- 10 MHz) during the overclock.
- Does the XScale CPU have the frequency fixed at 400 MHz ? Intel didn't think to dinamical frequence switch ? (like in Centrino or P4M) ? Because if not, then this software would allow battery economy. But it's weird, Intel wasn't able to do the same thing ???
Click to expand...
Click to collapse
Are you sure in underclocked? I am sure the memory clock is set to standard freq. with all the benefits,like stability and faster processor clock (472-530)
You can verify it downloading other Overclocking applications,like made from Mamaich.

I verify with CPUID, it shows all PDA frequencies. I can post screenshots, at 530 MHz, the memory runs in 66 MHz.
That's why I posted my question.

err..so whats the best setting when using the XCPUScaler?
And how come cannot access settings for over 500Mhz? Mine goes up to 475only

In Option select 'show frequencies over 500mhz'

Mi_ said:
I verify with CPUID, it shows all PDA frequencies. I can post screenshots, at 530 MHz, the memory runs in 66 MHz.
That's why I posted my question.
Click to expand...
Click to collapse
Use Mamaich Overclock program with:
L 27
M 4
N 1,5
You will obtain SDRAM and MEM LCD 100mhz,CPU 597mhz PXBUS 199mhz
I've Benchmarked it with GX BenchMark with no good results.
So,best performance for gaming you will obtain on 530Mhz

unapproachable2kx said:
Use Mamaich Overclock program with:
L 27
M 4
N 1,5
You will obtain SDRAM and MEM LCD 100mhz,CPU 597mhz PXBUS 199mhz
I've Benchmarked it with GX BenchMark with no good results.
So,best performance for gaming you will obtain on 530Mhz
Click to expand...
Click to collapse
Done that.
But at 530 MHz, my memory cames down to 66 MHz thus not 133 MHz, I think it doesn't support anything above 100-105 MHz.
Now I want to benchmark myself , I'll try to find GX Benchmark.
I only regret the downclocking function of CPUScalar, that saves battery (can somebody confirm ?)

Re: download xpu scalar (speed up ur ppc to 530 mhz) for fre
Prada said:
try this to speed up your pocket pc, good programs , try for xda II at 530 mhz
Click to expand...
Click to collapse
Could you tell me how to install even I copied all the files to my XDA2 .[/quote]

After many hard-resets,installation of system files and progrs..
I can finally assure that CALLER-ID program seriously give conflicts on overclocked Cpu frequencies,more than 472Mhz..(like 530,ecc..)
And drains more battery power.
Just let you know..
Now is your choice..

To tell u the truth, i use xCPUScalar for a month in advanced mode:
0-15% - 300
16-40% -400
41-70% -472
71 -100 -530 and have no problems at all.
BTW - CallerID is a very uncertain subj by itself.

i also use xCPUScalar for a month in advanced mode:
0-15% - 200
16-40% -400
41-70% -400
71 -100 -472 and have no problems at all.
But I don't see where I can get over the 472 limit??
I have a XDA (QTEK 2020) with a 400MHZ chip.
I see you guys talking about 500 and more sometime???
and this is possible, where XCPUScalar indicate 472 MAX ?
Thank you
PS: OK I get it, I just forget to enable the "show frequency over 500MHZ"
Now I see 530MHZ.
Juste hope it's fine like this.

CPU speed displayed by BatteryStatus

BatteryStatus (1.04.203 beta4) displays CPU speed as 312 MHz. It never changes regardless of the program being used.
Does anyone else see this?
Can anyone explain why it does not display 624 Mhz?

Can't explain it, but mine does the same. TCPMP reports 630mhz though.

this would not surprise me cause i had the p3600 before this phone and i did not see a difference in speed between the phones even through the p3600 had a 400mhz cpu

This is a known bug of BatteryStatus.

Actually this is not a bug, The battery status is made for XDA Neo (prophet) which runs an OMAP Processor so it is not compatible with Intel/Marvell Xscale or the Samsung's CPU's.
I have a p3300 which runs a 200Mhz OMAP and the battery status works great on it.

jazzymc said:
Actually this is not a bug, The battery status is made for XDA Neo (prophet) which runs an OMAP Processor so it is not compatible with Intel/Marvell Xscale or the Samsung's CPU's.
I have a p3300 which runs a 200Mhz OMAP and the battery status works great on it.
Click to expand...
Click to collapse
My bad. Sorry.... but it would be great if this super plug in could work with Xscale as well.

X1 RAM is slow?

I've run benchmark from SKTools, and it stated X1's RAM performance as far below Diamond, and I've noticed that my X1 ix indeed can be considered slow when running a lot of programs while it still have more than 50% more RAM; I've seen the CPU usage and it wasn't really stressed out.
So my conclusion is that X1 RAM is somewhat slow (mean : RAM speed, and timings -if you're familiar to the world of overclocking and such)
anybody else noticed?

nap007 said:
I've run benchmark from SKTools, and it stated X1's RAM performance as far below Diamond, and I've noticed that my X1 ix indeed can be considered slow when running a lot of programs while it still have more than 50% more RAM; I've seen the CPU usage and it wasn't really stressed out.
So my conclusion is that X1 RAM is somewhat slow (mean : RAM speed, and timings -if you're familiar to the world of overclocking and such)
anybody else noticed?
Click to expand...
Click to collapse
I would be quite skeptical of these results, HTC Diamond, Touch Pro and HD have nearly the same hardware components as X1. They have exactly the same CPU and I wouldn't mind to bet that they have the same (or similar) memory chip.
Maybe more benchmarks should be done by other users of both devices just in case.

nap007 said:
I've run benchmark from SKTools, and it stated X1's RAM performance as far below Diamond, and I've noticed that my X1 ix indeed can be considered slow when running a lot of programs while it still have more than 50% more RAM; I've seen the CPU usage and it wasn't really stressed out.
So my conclusion is that X1 RAM is somewhat slow (mean : RAM speed, and timings -if you're familiar to the world of overclocking and such)
anybody else noticed?
Click to expand...
Click to collapse
Hm, my score is 1010.00 if thats some sort of help

nap007 said:
I've run benchmark from SKTools, and it stated X1's RAM performance as far below Diamond, and I've noticed that my X1 ix indeed can be considered slow when running a lot of programs while it still have more than 50% more RAM; I've seen the CPU usage and it wasn't really stressed out.
So my conclusion is that X1 RAM is somewhat slow (mean : RAM speed, and timings -if you're familiar to the world of overclocking and such)
anybody else noticed?
Click to expand...
Click to collapse
I think it depends on what your phone is up to when you run it.
These are my Xperia results.
2nd fastest integer cpu results (323.57)
HTC Touch Diamond (331.11) with the Qualcomm MSM7201A CPU
RAM speed was actaully a lot faster than the Touch Diamond
Xperia X1 (1493)
Samsung Omnia (868)
HTC Touch Diamond (472)
In most of the other tests the Xperia scores very well.
Try a soft reset and benchmark it again maybe ?
Did you also notice SKTools shows CPU Clock speed of 400000000 or 400MHz !
Not sure if thats because the CPU is not running at full speed when its at low CPU utilitization or its been clock speed reduced to help with battery life like the iPhones.
iXX

ixxeon said:
I think it depends on what your phone is up to when you run it.
These are my Xperia results.
2nd fastest integer cpu results (323.57)
HTC Touch Diamond (331.11) with the Qualcomm MSM7201A CPU
RAM speed was actaully a lot faster than the Touch Diamond
Xperia X1 (1493)
Samsung Omnia (868)
HTC Touch Diamond (472)
In most of the other tests the Xperia scores very well.
Try a soft reset and benchmark it again maybe ?
Did you also notice SKTools shows CPU Clock speed of 400000000 or 400MHz !
Not sure if thats because the CPU is not running at full speed when its at low CPU utilitization or its been clock speed reduced to help with battery life like the iPhones.
iXX
Click to expand...
Click to collapse
hmmm you're right, I re test it again and now it's just a bit slower than yours, there has been some inconsistency it seemed.

interesting.... HomeScreen PlusPlus ALSO reports 400 MHz..... i think Device Information under Start --> Settings is only showing the SPECIFICATION that it's 528 MHz but I'm pretty sure it's underclocked to 400 MHz.

Same for me: 400 mhz. We need to find a program to overclock the device.

tsourisg said:
Same for me: 400 mhz. We need to find a program to overclock the device.
Click to expand...
Click to collapse
Maybe I am wrong but I think these devices have dinamic CPU speed. So probably 400 Mhz is the "normal" speed but it goes up to 528 only when "is needed". In the same way It goest down to 200 Mhz in standby
Dani

Overclocking possible?

I want to raise question is it possible to overclock the CPU, or GPU or memory speed. We all know that ze550kl / z00l performance with msm8916. Is almost in the limit to run apps and games, wanted to know if possible or not, and if there is any development has this respect. I like the device and it is great but it is clear that it is getting weak in the matter of hardware, if someone can work in this respect to give a breath / power to our device

Ermes.mt/brasil said:
I want to raise question is it possible to overclock the CPU, or GPU or memory speed. We all know that ze550kl / z00l performance with msm8916. Is almost in the limit to run apps and games, wanted to know if possible or not, and if there is any development has this respect. I like the device and it is great but it is clear that it is getting weak in the matter of hardware, if someone can work in this respect to give a breath / power to our device
Click to expand...
Click to collapse
i don't think so , if its possible to overclock the processor to its frequency,
you can costumize it too max frequency of it or to lower , as u need
But if is then i would love like to know too

I am already extracting the maximum, from him that I can of him, already put using ex kernel, with governor ordenad, frequency of 200mhz @ 12000mhz, and simple GPU ordered frequency of 200mhz to 400mhz, active zram of 512mb, and entropy of 128/256, then Of course, here with standard frequency of the paddle extracting nothing more than that, the problem and that we have a large bottleneck in memory lpddr3 of 533mhz, that opera and 32bit, there is a single channel giving bandwidth of 4.2gb / s that It has to be split between CPU and GPU. What is clearly one of the pro soc power limiter, I do not know much about the arm architecture, but I can not do over clock in lpddr3 memory, since I did not see any software or tutoring Citing this. Although this would be a solution, if you do over clock in the CPU or ns GPU will force the clock controller up what will increase the memory performance consequently, something else, not good will lock the clock at maximum in 1200mhz and GPU at 400mhz, as there will be a large power consumption and the performance will be limited by the cords of the tempering control and the low frequency of the RAM, # excuse me to have been so far more enthusiastic about hardware,

even with my old htc explorer i could increase cpu clocsk from 600mhz to 900mhz why we cant do it on zenfone 2 just we need good developer and kernel

it's up to the hardware
If you look at the specs from qualcom it has a max speed and not every device is possible to reach the max, but if you have the proper kernel you can reach that speed and "overclock"

Is there a way to increase the gpu frequency beyond the locked 400mhz the gpu runs at

ok so as we know the xt has a Qualcomm snapdragon 616 cpu, the GPU frequency is 550mhz as max but everytime i see the stats it stays locked at 400mhz no matter what you task you do. Is there a way to override the frequency lock and make it reach 550mhz?? i think that would make the phone feel smoother and handle intensive tasks even better. Hope i get an answer soon.