Related
Does anyone know if any of the items in my starup folder are unneccesary as my XDA II seems to be running really slowly:
Aflashman.lnk
Battery Monitor.lnk
BPinsert.lnk
BTIcon.lnk
CFlashMan.lnk
CheckAutoRun.lnk
HandsFree.lnk
IA_Caller_ID.lnk
MMReg.lnk
MultiIE.lnk
NFlashMan.lnk
poutlook.lnk
SMSreceiver.lnkstk.lnk
TFlashMan.lnk
USSD.lnk
VoiceCommand.lnk
There seems to be a lot here. Any ideas of what I could lose?
Look at www.ppcw.net (special story about it) or at www.tekguru.co.uk (last part of his review).
Your problem of running slow is probably due to a MS Mobile 2003 bug My I-mate was running really slow.
Download this freeware (both of them), install them and run them. I had over 500 entries in the database which I cleared with the util and it went to 9 The speed of my Imate returned to normal.
http://www.scarybearsoftware.com/ppc_cn_overview.html
Hope that helps....
Thanx drj bro! I had 830!!! Down to 11 after running app. My XDAII is running real smooth now. The second app says its only trial though....
Your welcome...glad it worked!
It will build up over time and as you soft reset. Just run the util every once and a while and all should be well.
drj said:
Your problem of running slow is probably due to a MS Mobile 2003 bug My I-mate was running really slow.
Download this freeware (both of them), install them and run them. I had over 500 entries in the database which I cleared with the util and it went to 9 The speed of my Imate returned to normal.
http://www.scarybearsoftware.com/ppc_cn_overview.html
Hope that helps....
Click to expand...
Click to collapse
Thanks from me too! I had my alarms fail, which made me oversleep, which could have been very embarrassing on any other night as the bands I drive rely on me getting them to the next gig on time.
I installed this freeware which seems to have (a) cleared a lot of unwanted dross & (b) sorted out my alarm problem (I think!)
I also use the very useful pocket alarm from Burr Oak Software, check it out here:-
http://www.burroak.on.ca/pta2.html
Top banana! Thanks again!
My Australia i-Mate came with a whole bunch of Telstra customisations. I would actually like to get rid of these because they interfere with telephone functionality (e.g replaces caller ID with a telstra logo!).
However I am unable to delete the Telstra setup files using File Explorer. Anybody have any ideas how to do it?
Has anyone got TodayPlus http://www.pocketpcfreeware.com/en/index.php?soft=843
up an running on the wizard. It is/was the best todayscreen plugin on my old Ipaq. I can get it to run as a stand alone app. but not to integrate as a plugin.
Al
Hmm.. I reviving this threat after 'discovering' something called 'TodayPlus'. I did a google to it and it seems to be a very powerful program. From the looks of it, it seems to have the potential to cover both PocketBreeze and PocketPlus.. and yet it seems to be not often being discussed here. It seems to be able to do everything, by scripting (feels to be like the PPC version of Samurize.com)
I'm bound to give it a go this weekend.
Those who are interested, take a look at this MASSIVE forum just for this today plugin/application.
http://forums.jhollin1138.com/
French version http://www.todayplus.fr.tc/
You may able to download the software from the link above (post by `wizzzard`).
Note that, there are a lot of software named TodayPlus, which includes a Palm based software that tries to emulate PPC Today. So, it is rather confusing to do a google for it. Anyway, the 'head' of TodayPlus seems to be at this site
http://www.dark-mojo.com/
But it seems to be currently down.. interesting...
i got it working
http://forum.xda-developers.com/viewtopic.php?p=360201#360201
but i couldn't get it to update weather, rss,radar
attaching the program
Todayplus is/was the best plugin I found. It worked perfectly on my WM2003 Ipaq2210 and works on my WM5 Wizard. It was designed for WM2003 and does not support landscape correctly. There is no support available from the author but remains for me the most adaptable today screen plugin.
Don't work for me...
I got only a blank screen. Any suggestion?
Ciao
blank screen
i have given edited dll also in that archive.
Skip the steps for editing it and you have to follow these steps
phuntum (05-27-2005) - v0.11.0
On your PPC use a file explorer that will allow you to see extensions and hidden files to find the file “todayplus.dll” in \Program Files\TodayPlus and copy it to your PC. On your PPC turn off the TodayPlus plugin (uncheck in the Settings/Today screen), soft reset, and move “todayplus.dll” from \Program Files\TodayPlus to \My Documents. On your PC use a hexeditor to open the “todayplus.dll” and search for “7D 1E A0 E3 03 08 A0 E1”; replace “7D” with “8D”; save the edited “todayplus .dll” and copy it back to \Program Files\TodayPlus on your PPC. Delete” todayplus.dll” from \My Documents and reset your PPC. On your PPC turn on the TodayPlus plugin (check in the Settings/Today screen) and soft reset.
phuntum (05-28-2005) - v0.11.0
The above fix is permanent. Save the new todayplus.dll in a safe place so that if you have to reinstall (e.g., after a hard reset) all you need do is install, disable, and replace as per above. You might want to save the instructions just in case. Free hexeditors are abundantly available. Do a web search for one. It's a great program and the effort is worth it. When you're ready, surf over to http://www.jhollin1138.com for a goldmine of help. There is a great debate as to whether the fix should be shared--somewhat hypocritical in my estimation, since those who were lucky enough to get it before it disappeared are using it.
these are the directions from ppcfreewares i followed
after doing this go to this thread http://forums.jhollin1138.com/viewtopic.php?t=1292
and start with no 6 in instructions
good luck
I still need to reinstall this plugin after upgrading my ROM.
There are loads of diferent skins available my favourite is attached.
The Dark Mojo forum closed ages ago but discussions particularly on the "Hammerskin" skin are ongoing on http://forums.jhollin1138.com/
Hammerskin is awesome but it was too much of a resource hog last time I tried it.
Sorry for the double post
updates?
did u get weather and rss updated?
I have tried it twice on my Kjam. Used the modified dll provided. however, I can only see a white screen when trying to access the settings! :S Does anybody know what I am doing wrong? Thanks
Ok, I found it! I was missing the .net!
Very nice application with beautifull skins! Only drawback is that it does not auto refresh when you add a new apointment or task!
Apart from that its a really nice application!
Arrgghh,
Reinstalled on my Wizard after upgrading to Molski's ROM. I can get it working as a plugin rather than as a stand alone program, which previously was my stumbling block. Now I can't get the config utility to remember my location or get weather and rss feeds updated. This did work on my old ROM. I think it is just some reg settings that need creating but why it worked before and not now I do not know.
Hi Guys,
Im a newbie to this plugin but so far I understand that its able to make short cuts on the "desktop" just like a normal pc....and thats what Im looking for.
Ive followed the instructions carefully and the first time it went okay....i.e I got the slider.txt in the skin box. However I didnt find the "okay" button on the top.
Well I followed the instructions but it didnt show up on my desktop....strange so I uninstalled.
Now Ive been reading a bit further and read that the reason why it might not have workd could be the date so I decided to set back the clock 2 years and reinstall it.
2nd time around I dont get the slider.txt option, it has saved my settings from my first install....and it still doesnt work.
help help help
Well after som struggle I managed to get the slider.txt into the "Select Skin (DLL)"
But its still not working on my today screen. I can choose it as the only item on the today screen however its just blank.
Is this because I use a special black screen (tsk file) for my back ground ?
Also its seems to forget my location (Lat/Long)
Any help so that I can get it working ??
Im using a Qtek 9100 with WM 5 OS 5.1.195 Build 14847.2.0.0
Oh I'm happy again
I finally got Todayplus running properly again. Weather and RSS are updating correctly.
This is what I did.
1 install Todayplus cab
2 Disable Todayplus from Settings/Today/items
3 Soft reset. Or power cycle the phone.
4 Overwrite todayplus.dll with the modded one
5 create directory \program files\todayplus\Buffer
6 Connect to internet and verify connection with PIE, minimise
7 Run todayplus config
6 Tab to Weather/RSS add new weather cities and rss feeds
7 Tab to Time/Storage add new timezone and set storage path to \Storage Card (case sensitive and device specific for Wizard?
8 Close Todayplus config
The config utility would not save my location coordinates on the owner info tab so I manually entered the values into HKCU\Software\SRSSoft\TodayPlus\coords\1 (string value of the form 53.483,-2.053) You can get your city coords from http://www.heavens-above.com/
9 Disable all other today screen plugins and enable todayplus. Close the settings program.
On returning to the today screen after a short wait Todayplus should be working. This worked for me but there is loads of information at http://forums.jhollin1138.com/viewtopic.php?t=1292 if you need further help.
Even though "Auto update - Every 1 hour" is checked under "Sync", it does not update weather forecasts automatically. I use this template for weather.com source: http://www.pdagold.com/themes/detail.asp?t=14490.
Any ideas? Thanks.
seugene said:
Even though "Auto update - Every 1 hour" is checked under "Sync", it does not update weather forecasts automatically. I use this template for weather.com source: http://www.pdagold.com/themes/detail.asp?t=14490.
Any ideas? Thanks.
Click to expand...
Click to collapse
Got the same issue - also mine doesnt update when docked either!!
My theory is if you're using a custom template then is wont auto update. All we need to do is test to see if the (built in) GisMeteo template updates when docked then we'll know.
Matt
I think it's the template; have the same problem since instaling a wetter.com template that morning!
The reason I changed the source is because I trust weather.com much more than gismeteo.ru (never heard of them). Practically speaking, gismeteo forecast was WAAAAYYY off when I was in Chicago a month ago. I will look for another weather.com template. Accuweather.com is also a good source - a lot of TV stations use them as source in the US. Anybody knows where to find templates for those sources?
Install the latest version of SPB Weather. That fixed the issue for me.
Have the latest version installed (1.6.2 build 729), no auto synch (not even once a day instead of configuration).
Maybe here's a solution (http://www.spbsoftwarehouse.com/products/weather/support_articles28.html?de#). I'm just testing it.
Maybe we can create our own template by mixing up the spb template with others presupposed the spb template works
Sorry for double post but
it W O R K S !!!
btw.: Here's the template I used, I modified it a little and now it semms to work, too (I hope :roll: )
[...but after a while suddenly all weather dates disappear :?:] solved after softreset :!:
I updated from 1.6.2 build 728 to build 729. Now it updates automatically while docked, but not when it's not connected to the PC.
SPB weather does not update automatically for me at all, even though I have it set to update every hour.
You need a Data Connection maybe?
SPB Weather doesn't automatically establish a Data Connection.
I just saw this the other day....check the second to last item on the page...
http://www.spbsoftwarehouse.com/products/weather/support_articles29.html?de#
Later,
JBunch
Guys Could you select the today plugin with the dpad?
El_Mar1ach1 said:
Guys Could you select the today plugin with the dpad?
Click to expand...
Click to collapse
Yea i can scroll basically to any item on my today screen with the d-pad. I can scroll thru the today tabs/items with no problem.
Hi All,
As requested, find attached weather sources for SPB weather.
There are two scripts below, one basic and one detailed. Instruction on how to use are in the the templates, so just open in notepad to view the 'how to'. I use the basic one, but have a play as you can go down to each states weather centres.
Weather is then sourced from www.weatherzone.com.au.
I take no credit for this script and a big thanks to recrem (from the now closed Mtekk forum) for updating a while back.
Enjoy,
Dev
Thanks for the good work. Good to see an Aussie Weather Source
Thanks again Dev,
Just downloading your weather files now (after trawling through whirlpool all morning looking for your post). I was happy using the one in SPB mobile shell until today... it forecasts 30 for today and it is much closer to 34... all the news channels were saying 34, so obviously they got their data from a more reliable source.
Works great with SPB Traveler, but has anyone made it work with the SPB panel's weather? It seems to take its data from Traveler when Traveler is installed, but if you select a custom city, the panel's weather screen just tells you that "No weather data has been downloaded".
bedlam_au said:
Works great with SPB Traveler, but has anyone made it work with the SPB panel's weather? It seems to take its data from Traveler when Traveler is installed, but if you select a custom city, the panel's weather screen just tells you that "No weather data has been downloaded".
Click to expand...
Click to collapse
There is no need to create a custom city (unless it's not in the list).
There are full instructions in the template file (open with notepad).
It is working fine for me... apart from a few issues with weather icons not showing up from time to time.
buzz83 said:
There is no need to create a custom city (unless it's not in the list).
There are full instructions in the template file (open with notepad).
It is working fine for me... apart from a few issues with weather icons not showing up from time to time.
Click to expand...
Click to collapse
As I said, it works fine in SPB Traveler. Where it doesn't work is with SPB's custom X1 panel. The weather icon on its "Today" screen is just a sun with N/A where the temp should be. Tapping on that icon, which normally shows the next 4 days, has a message along the lines of "The weather data hasn't been downloaded.
I'm assuming it's because those scripts produce temperatures and icons in a slightly different format. Traveler can handle it but the Panel can't. It'd need someone with a bit more script nerdery than me to reformat those scripts to something the Panel's weather routine can read.
bedlam_au said:
As I said, it works fine in SPB Traveler. Where it doesn't work is with SPB's custom X1 panel. The weather icon on its "Today" screen is just a sun with N/A where the temp should be. Tapping on that icon, which normally shows the next 4 days, has a message along the lines of "The weather data hasn't been downloaded.
I'm assuming it's because those scripts produce temperatures and icons in a slightly different format. Traveler can handle it but the Panel can't. It'd need someone with a bit more script nerdery than me to reformat those scripts to something the Panel's weather routine can read.
Click to expand...
Click to collapse
Yes, only SPB weather can read the scripts to display the correct icons. So if you don't have SPB weather loaded, its no good as Shell Panel doesn't work with it.
Dev
Revised Detailed Script to fix missing codes
Hi all,
It would seems weatherzone.com.au have now stopped displaying the city code number in the URL address as per the instruction in the template.
So I have modified the template so you can now get it to work if you don't know your suburbs code.
Instructions are at the top of the file, so just open with notepad and you'll be off and running.
Enjoy.
Dev
thedeva said:
Hi all,
It would seems weatherzone.com.au have now stopped displaying the city code number in the URL address as per the instruction in the template.
So I have modified the template so you can now get it to work if you don't know your suburbs code.
Instructions are at the top of the file, so just open with notepad and you'll be off and running.
Enjoy.
Dev
Click to expand...
Click to collapse
You have proved yourself yet again dev.
SPB Weather was giving me the #$%s on the weekend, but I was house hunting and didn't have time to play around with it.
Looks like you've done the job very nicely.
Thanks again
For reasons I can't begin to understand, it would seem the issues with SPB Traveler messing with the SPB Panel's weather are resolved by installing SPB Weather.
If I was being scientific about it, I'd see if it works in isolation without Traveler or if this new version of the script has anything to do with it. But I'm not.
So for now, the combination of Traveler + Weather + current script by TheDeva = correct weather now being displayed in the SPB Mobile Shell Panel. Some weather icons are N/A, but at least the temperature is correct and not 10 degrees out like it used to be. (What are these other websites using as the source of their information??)
Thankyou to 'thedeva' for the modified spb weather script... the programs now works and it gives the same forcasts that we get on ABC weather.. so that accuracy helps alot.
One thing I have noticed is that there is never an icon for the next days weather. e.g. today is tuesday, and there is no icon for wedneday's forcast. Tomorrow after I update, there will be no icon for the next day. I have Ballarat and Melbourne as the cities I watch, but neither will display the next day's icon using this template... when i go back to the default spb scripts all is good, just lousy weather forcasts...
I have looked at the script, but I can't see where the fault lies... any ideas please ?
David
Hi All,
I have read all the templates and comments and cannot get the weather to display correctly. I have mobile shell installed as well as SPB weather. The custom city of melbourne has been added with directions supplied by 'thedeva'. I get the dreaded N/A on the professional Now screen. Any ideas?
Thanks!
Dan.
SPB v1.7 with Melbourne?
Hi guys,
I have SPB 1.7 (which is more lightweight than the current) and am trying to get it to work with the script.
It doesn't say in the script which "City Code Type" to use but I've tried all 3 (user defined, ICAO and GisMeteo.ru) with no luck.
I've set Custom City with "vic/melbourne/melbourne".
I get a "Error downloading data from site". I'm pretty sure I have connectivity as I see the HSPDA connection go and if it's in the crade the sync marks go (and other apps update).
Can anyone assist?
Cheers,
Gavan
I believe SPB Wather older than version 2 are obsolete and don't have any support/sources for them.
Thanks Orlesi - can anyone else also confirm it won't work with v1.7? I've been deliberately running the older version for a smaller simpler lightweight forecaster.
glimjoon said:
Thanks Orlesi - can anyone else also confirm it won't work with v1.7? I've been deliberately running the older version for a smaller simpler lightweight forecaster.
Click to expand...
Click to collapse
Yep.
The custom template is for 2.0 on only. It's still a little buggy though.
I've come late to this, so hopefully someone is still monitoring it. I installed the script and my forecast now comes from the BOM. The only part I didn't understand when reading through the script is how to get the Mobile Shell widget to display the weather. I simply get N/A. Is this by design and unavoidable, or is it possible to fix it?
More importantly, my current temperature seems to be wrong. It seems to still be getting that part from the 'Default Source', even though I've disabled that. It's 37 degrees here today right now, and Weatherzone agrees. But SPB Weather is showing only 31, which is the temperature the 'Default Source' thinks it is. Also, when I tap the current temperature, it says the 'location' is 'Adelaide Intl', which again is the location of the 'Default Source', not the Weatherzone source. So even though I've set Weatherzone as default, and all the long range forecasts seem to be using it and are correct per the BOM site, the current temperature seems to be sourcing from the standard SPB Weather 'Default Source' still, even though I've said 'Don't use this source' (and under sources, it shows as 'This source is not used'). Is there something I need to change in the script to get it to display the current weather from the weatherzone source?
Sorry if I've missed something obvious.
EDIT: Please forgive me, I realised that I had used the default city in SPB weather, which I think is why I was getting the Default Source data for the current temperature. I set up a custom city and it seems to not be be drawing from the default source now. Except now, there seems to be no current temperature. Well, the field is there, but it's actually only showing the forecasted maximum there, not the actual temperature. When I tap it, all I see are the forecasted maximums, no data for when the reading was taken. I'll keep looking but if anyone has any idea why this is happening, I'd appreciate your input. I see there is something written about exactly this behaviour in the script, but I can't work out if that's just saying 'that's how it is' or whether there is a way to fix it? Sorry for being such a noob!
Over the last few days or so, this weather template seems to have stopped working. I suspect that there have been modifications on the weatherzone.com.au website. If anybody has managed to fix the template, I would much appreciate it
_Robert_ said:
Over the last few days or so, this weather template seems to have stopped working. I suspect that there have been modifications on the weatherzone.com.au website. If anybody has managed to fix the template, I would much appreciate it
Click to expand...
Click to collapse
Yep. I have found the same thing. Today is the last date for which data was downloaded and I guess that it was downloaded about 7 days ago. Without a fix I guess I will be forced to use a US source which will in fact render SPB Weather useless.
For the record I found that this one (http://www.pdagold.com/themes/detail.asp?t=16497) still works at least for Melbourne but it doesn't provide detailed weather the way the weatherzone one used to.
Anyone tried the new 'official' Telstra ROM
http://www.htc.com/au/SupportDownload.aspx?p_id=179&cat=2&dl_id=594
HTC Touch HD ROM Upgrade (For Telstra) Release Date: 2009-06-26 Category: ROM Upgrade
An updated ROM is now available for HTC Touch HD customers to download. As always, HTC is committed to providing customers with the best possible mobile experience.
Installation Instructions:
ROM version: 1.59.841.5
Radio version: 1.14.25.24
Improved Functions and Fixes
1. Telstra OZ1a e-mail settings have been included.
2. The Weather Tab has been added.
3. The Customize Tabs option has been added.
nossac said:
Anyone tried the new 'official' Telstra ROM
http://www.htc.com/au/SupportDownload.aspx?p_id=179&cat=2&dl_id=594
HTC Touch HD ROM Upgrade (For Telstra) Release Date: 2009-06-26 Category: ROM Upgrade
An updated ROM is now available for HTC Touch HD customers to download. As always, HTC is committed to providing customers with the best possible mobile experience.
Installation Instructions:
ROM version: 1.59.841.5
Radio version: 1.14.25.24
Improved Functions and Fixes
1. Telstra OZ1a e-mail settings have been included.
2. The Weather Tab has been added.
3. The Customize Tabs option has been added.
Click to expand...
Click to collapse
Not as yet - have downloaded it just now. Will try it out tonight and get back to you.
I have spent the last 3 weeks - since I purchased my HTC Touch HD - on getting Telstra to give us the right to use a stock ROM. It seems they may at last be starting to listen to their customers.
In the meantime I have been using my old and trusted SPB Mobile Shell; Weather; Wallet; GPRS Monitor; Keyboard; Time and Backup. Took a long time to set it all up again and get rid of the Telstra stuff.
Although some of it was useful and I do like the look of the TOUCHflo 3D - I just didn't want all the Telstra Overkill - seeing as I purchsed the HTC outright.
What a surprise to now see Telstra come to the party. LOL
Cheers
i've tried it can't say i notice anything really different....might just have the fixes built in...same old keyboard etc
I tried it and found the following differences
1) HTC Weather tab (only major cities so sort of sucks but the animations are cool)
2) a few different internet connections defined including 'telstra enterprise'
3) couldn't set up my over the air activesync to my corporate email. Kept on telling me the modem settings wouldn't let me connect. After a number of fustrating phone calls to HTC and Telstra I worked it out myself. When you go into the options for the email account after setting it up there used to be an advanced button where you could set which internet connection to use, this is no longer there. Instead where you define which options to sync (email, contacts, calendar and tasks) there is an options tab, under this is a connection tab which has 'dedicated' by default. Changing this to internet fixed the problem.
3) new Telstra email service seems to be on this rom, for $7 you get 1000 emails from telstra mail, hotmail etc. However attachments are only free if you use Telstra or bigpond mail.
It seems a little bit faster, although not that much.
Internet seems to be quicker as well.
I gained an extra bar of signal strength.
nossac said:
I tried it and found the following differences
1) HTC Weather tab (only major cities so sort of sucks but the animations are cool)
2) a few different internet connections defined including 'telstra enterprise'
3) couldn't set up my over the air activesync to my corporate email. Kept on telling me the modem settings wouldn't let me connect. After a number of fustrating phone calls to HTC and Telstra I worked it out myself. When you go into the options for the email account after setting it up there used to be an advanced button where you could set which internet connection to use, this is no longer there. Instead where you define which options to sync (email, contacts, calendar and tasks) there is an options tab, under this is a connection tab which has 'dedicated' by default. Changing this to internet fixed the problem.
3) new Telstra email service seems to be on this rom, for $7 you get 1000 emails from telstra mail, hotmail etc. However attachments are only free if you use Telstra or bigpond mail.
It seems a little bit faster, although not that much.
Internet seems to be quicker as well.
I gained an extra bar of signal strength.
Click to expand...
Click to collapse
Can you upload this rom for sharing? Thanks!
can't download
Can you tell me why I can't download this rom?
When i type my device S/N HT92RKD01786,
system answer is "Sorry, this software download is not suitable for your device."
When i open htc site for my country (Poland), there is no rom update in this year. Can I install this rom , if someone upload it?
Tried it - very disappointed
I tried it out last night and was very disappointed - yet once again.
The Weather Tab is now available but I still could not find the Customize Tabs location or application. Nothing else changed much on mine. I live in the "Next G" network area - so going from 1 bar to 2 bars did'nt exite me too much.
Telstra - shame on you for degrading such a perfect piece of equipment.
Ohh well - back to SPB - seems that one does work well and allows me to change whatever I like. Maybe not as good looking as the Touchflo app but at least I can customize and I don't have TELSTRA in my face the whole day.
Fuxik - I believe this upgrade is only available to the HTC 8285 "Telstra" branded model. Believe me, you probably don't want this one if you already have a working "Stock HTC ROM" installed.
Again guys - very disappointed in Telstra. Why aren't we allowed to have a stock ROM ?? Does Telstra think we are all "dummies" and can't find our way around a mobile?? Or are they afraid if we don't see them we may not use them (haha)...
ROM is in the base directory of the FTP site, couldnt seem to put it anywhere else
Battery life seems to be a bit less with this ROM
Can't change the home screen on touchflo, can assign a different picture but it doesn't pick it up
Seems to turn itself on every now and then for no particular reason
Drop downs in SPB Mobile and Phone seem to have stopped working
Opera browser paints itself about 1 cm to big sometimes and you can see the top of the bottom buttons but cant hit them.
Same here Nossac
I've also found a few issues with this new Telstra release.
Battery life is definately shorter now.
I was never able to change the picture on the "Telstra" home screen from day one. Last version had same issue.
Still cannot find the so-called "Customisation Button".
I ended up not istalling SPB Phone as it kept conflicting with the Telstra settings. But not having any issue with SPB Mobile Shell 3.0 (as yet)
I'm in the Next G zone and am now having an issue with the Internet Connection. My phone now seems to want to connect to HSDPA instead of 3G - It takes longer to download anything because of this. Telstra won't let us change the Connection Settings. They are pre-set.
What a joke.
Will be calling Telstra today to see what to do next.
Still NOT happy Jan!! LOL
Not being able to alter the background annoyued me so much I ended up putting Mobile Shell back on
I have SPB Mobile, Phone and Time all running nicely.
If only they would release better Mobile Shell widgets...
My phone has always gone to H when doing data then kicks back into 3G after is has finished. For some reason I thought that is what it was meant to do??
Even my mega battery is down to 40% at night now (new ROM + Mobile Shell) is a bit of a killer, it used to only get down to 60%