Related
Hi folks
As anyone at all managed to get ozVGA or something like working on the M5000. Ive tried but cant access the screen at all after the reset and then end up having to do a hard reset and start again from scratch. It wont even let me access the files via the USB cable.
Any help very much appreciated as I've reconfigured the entire device to try OzVGa and even SEVGA (doesnt work at all) to no avail.
Or is there settings I just save before rebooting. Please tell me how you did it.
Thanks in advance
Same problem
Hi guys,
I've got exactly the same problem. I wonder if it's to do with the Orange customisation....
It locks up if you use a password to first access the device, immediately when you press the first digit on the keypad. If you remove the password from your device, then it launches the window in proper VGA mode, but again, locks up, needing a hard reset.
I dont care about having true VGA for this device all the time, just for my web browser will do.... :roll:
Alwyn
Same just would like a real size on web browsing (WTF why didnt they fix that.. doh)
I dont have password on.. (as still am testing but it just locks up completely until a hard reset.
Read this thread here: http://forum.xda-developers.com/viewtopic.php?t=32217
Did... read. copied.. machine died.. did it work for you?
exactly what i did:- and didnt work
1. Soft reset your Universal first to clear any locks
2. Unzip the entire archive onto your PC into a single directory
3. Copy ALL of the files into your PocketPC's Windows directory
4. Run the SdkCerts.cab included in the files.
5. Create a shortcut to the ozVGA.exe file within your Windows Directory and place into Start Menu
6. Startup ozVGA and click the lower lefthand button
7. Your device will restart in your new resolution!
I think that I had similiar problems until I did a soft reset after step 4, before starting ozVGA the first time. Now it's working for me (MDA-Pro, latest Jasjar ROM).
I'm nopt really sure it the soft reset was the solution, but anyway it's worth a try.
Wolfgang
Woot!! worked. reset inbetween worked... thanks
works first time on my m5000, and i am still learning this machine can do so much!! saving for a bigger SD card and ill be on my way
What is ozVGA??
can someone tell me?
OZVGA is anyone still using this?
Before I stuff up my machine again I'd like to know if it's worth it. Or if not, are there any bettet alternatives, I only really need a proper screen for IE.
I tried OzVGA and had the same problem and had to do a hard reset, at which point I found the thread here recommending a different program (attached) which worked perfectly for me. If you want to go back, just uninstall it. If you keep the cab file, you can switch back and forth as needed. It even lists in the readme the exact changes it does, which made me feel better.
VGA seems worth it to me - so much more can be fit on the screen, and I couldn't switch back now. Internet Explorer also looks great in VGA, along with everything else. No more needing to scroll all the time in things is very nice, at least for me.
I haven't found a way to get Internet Explorer to run properly in QVGA like it does in VGA mode (it insists on doubling the images). However, if it's just for the internet you want, you could try Opera which handles VGA better, and will give you the Internet Explorer in VGA mode experience in QVGA mode without needing to switch.
Hope this helps, just wanted to add my (limited) experience and recommendation for the application in the linked post
Has anyone got TodayPlus http://www.pocketpcfreeware.com/en/index.php?soft=843
up an running on the wizard. It is/was the best todayscreen plugin on my old Ipaq. I can get it to run as a stand alone app. but not to integrate as a plugin.
Al
Hmm.. I reviving this threat after 'discovering' something called 'TodayPlus'. I did a google to it and it seems to be a very powerful program. From the looks of it, it seems to have the potential to cover both PocketBreeze and PocketPlus.. and yet it seems to be not often being discussed here. It seems to be able to do everything, by scripting (feels to be like the PPC version of Samurize.com)
I'm bound to give it a go this weekend.
Those who are interested, take a look at this MASSIVE forum just for this today plugin/application.
http://forums.jhollin1138.com/
French version http://www.todayplus.fr.tc/
You may able to download the software from the link above (post by `wizzzard`).
Note that, there are a lot of software named TodayPlus, which includes a Palm based software that tries to emulate PPC Today. So, it is rather confusing to do a google for it. Anyway, the 'head' of TodayPlus seems to be at this site
http://www.dark-mojo.com/
But it seems to be currently down.. interesting...
i got it working
http://forum.xda-developers.com/viewtopic.php?p=360201#360201
but i couldn't get it to update weather, rss,radar
attaching the program
Todayplus is/was the best plugin I found. It worked perfectly on my WM2003 Ipaq2210 and works on my WM5 Wizard. It was designed for WM2003 and does not support landscape correctly. There is no support available from the author but remains for me the most adaptable today screen plugin.
Don't work for me...
I got only a blank screen. Any suggestion?
Ciao
blank screen
i have given edited dll also in that archive.
Skip the steps for editing it and you have to follow these steps
phuntum (05-27-2005) - v0.11.0
On your PPC use a file explorer that will allow you to see extensions and hidden files to find the file “todayplus.dll” in \Program Files\TodayPlus and copy it to your PC. On your PPC turn off the TodayPlus plugin (uncheck in the Settings/Today screen), soft reset, and move “todayplus.dll” from \Program Files\TodayPlus to \My Documents. On your PC use a hexeditor to open the “todayplus.dll” and search for “7D 1E A0 E3 03 08 A0 E1”; replace “7D” with “8D”; save the edited “todayplus .dll” and copy it back to \Program Files\TodayPlus on your PPC. Delete” todayplus.dll” from \My Documents and reset your PPC. On your PPC turn on the TodayPlus plugin (check in the Settings/Today screen) and soft reset.
phuntum (05-28-2005) - v0.11.0
The above fix is permanent. Save the new todayplus.dll in a safe place so that if you have to reinstall (e.g., after a hard reset) all you need do is install, disable, and replace as per above. You might want to save the instructions just in case. Free hexeditors are abundantly available. Do a web search for one. It's a great program and the effort is worth it. When you're ready, surf over to http://www.jhollin1138.com for a goldmine of help. There is a great debate as to whether the fix should be shared--somewhat hypocritical in my estimation, since those who were lucky enough to get it before it disappeared are using it.
these are the directions from ppcfreewares i followed
after doing this go to this thread http://forums.jhollin1138.com/viewtopic.php?t=1292
and start with no 6 in instructions
good luck
I still need to reinstall this plugin after upgrading my ROM.
There are loads of diferent skins available my favourite is attached.
The Dark Mojo forum closed ages ago but discussions particularly on the "Hammerskin" skin are ongoing on http://forums.jhollin1138.com/
Hammerskin is awesome but it was too much of a resource hog last time I tried it.
Sorry for the double post
updates?
did u get weather and rss updated?
I have tried it twice on my Kjam. Used the modified dll provided. however, I can only see a white screen when trying to access the settings! :S Does anybody know what I am doing wrong? Thanks
Ok, I found it! I was missing the .net!
Very nice application with beautifull skins! Only drawback is that it does not auto refresh when you add a new apointment or task!
Apart from that its a really nice application!
Arrgghh,
Reinstalled on my Wizard after upgrading to Molski's ROM. I can get it working as a plugin rather than as a stand alone program, which previously was my stumbling block. Now I can't get the config utility to remember my location or get weather and rss feeds updated. This did work on my old ROM. I think it is just some reg settings that need creating but why it worked before and not now I do not know.
Hi Guys,
Im a newbie to this plugin but so far I understand that its able to make short cuts on the "desktop" just like a normal pc....and thats what Im looking for.
Ive followed the instructions carefully and the first time it went okay....i.e I got the slider.txt in the skin box. However I didnt find the "okay" button on the top.
Well I followed the instructions but it didnt show up on my desktop....strange so I uninstalled.
Now Ive been reading a bit further and read that the reason why it might not have workd could be the date so I decided to set back the clock 2 years and reinstall it.
2nd time around I dont get the slider.txt option, it has saved my settings from my first install....and it still doesnt work.
help help help
Well after som struggle I managed to get the slider.txt into the "Select Skin (DLL)"
But its still not working on my today screen. I can choose it as the only item on the today screen however its just blank.
Is this because I use a special black screen (tsk file) for my back ground ?
Also its seems to forget my location (Lat/Long)
Any help so that I can get it working ??
Im using a Qtek 9100 with WM 5 OS 5.1.195 Build 14847.2.0.0
Oh I'm happy again
I finally got Todayplus running properly again. Weather and RSS are updating correctly.
This is what I did.
1 install Todayplus cab
2 Disable Todayplus from Settings/Today/items
3 Soft reset. Or power cycle the phone.
4 Overwrite todayplus.dll with the modded one
5 create directory \program files\todayplus\Buffer
6 Connect to internet and verify connection with PIE, minimise
7 Run todayplus config
6 Tab to Weather/RSS add new weather cities and rss feeds
7 Tab to Time/Storage add new timezone and set storage path to \Storage Card (case sensitive and device specific for Wizard?
8 Close Todayplus config
The config utility would not save my location coordinates on the owner info tab so I manually entered the values into HKCU\Software\SRSSoft\TodayPlus\coords\1 (string value of the form 53.483,-2.053) You can get your city coords from http://www.heavens-above.com/
9 Disable all other today screen plugins and enable todayplus. Close the settings program.
On returning to the today screen after a short wait Todayplus should be working. This worked for me but there is loads of information at http://forums.jhollin1138.com/viewtopic.php?t=1292 if you need further help.
Hi all,
Just got my I-mate JAM last week ... and absolutely love it. I know the JAM isn't the latest and greatest anymore, but I wanted a small PPC phone and JAM's the perfect size. The JAMin is too expensive for me, and I also think its improvements (wifi, EDGE, WM5 to name a few) are over-rated.
I had a separate PPC (toshiba e330 ... yeah it's about time it retires) and a smartphone (MPx220) before so it's great I only get to carry 1 device instead of 2.
Anyways, got a few newbie questions I hope you guys can help me with ...
1- Storage memory??
I realize the JAM has limited memory so I've been installing as many programs as possible on the 1G SD memory card.
I still found that ~ 60% of 'storage memory' is used though, so I started moving some more programs to the memory card (and had to relink them one by one).
Afterwards I found the 'storage memory' has actually gone UP even more ... from 60% to 68%??!
What is storage memory? I thought storage memory is the stuff (program / database) stored on the RAM, so by moving some of the programs to the flash card I should see the storage memory go DOWN, not UP?!
When I run something like a 'space detective' I find that all of my big files are on the memory card anyways, so I really don't know how my storage memory got so high, and don't know how to get it back down neither.
2. Repeated resetting
Everytime I do a soft-reset, the PPC has a tendency to do repeated resetting before I finally get it back ... the first time it freaked me out. I thought it's gone into an endless loop and I'd have to do a hard-reset ... good thing I got it back after 4-5 soft-resets. Once I get it back it actually runs stable, and wouldn't reset itself.
Is that normal? Has anybody else experienced this? Usually it'd reset itself again once it gets to loading the phone alarm today plug-in, or when it connects to the phone network.
I currently have the following plugin's installed on the today screen:
-phone alarm
- ADB Weather
- Calendar
And I also run WisBar Advanced 2 ... but I have disabled WA2 to reload itself automatically on soft-resets.
I put phone alarm, ADB weather and WA2 on the main storage instead of memory, because I don't want to increase the chance of crashing.
Does anybody else has this problem? Do I have a software conflict here?
3. Photo contact?
I use photo contact that comes with the phone ... now that software is a piece of crap to begin with, keeps freezing the PPC even for the smallest thing.
And, 5 times out of 10 when someone who's been assigned a photo ID calls, the photo doesn't show up. This is despite I've put the resized photo contacts on the main memory, not the memory card.
Anybody experienced the same problem? And what's a good photo contact ID program to recommend?
4. Good dialer program?
I can also use a good replacement dialer program ... the dialer program that comes with the phone works, but it's pretty slow in suggesting contacts as I dial, and the buttons a tad small as well for 1 hand operation.
I tried D9, but for whatever reason it doesn't install for me ... plus, I also need the DTMF tones to check voicemail and what not.
5. Must have appz?
Any other must have appz you guys would highly recommend? Since getting the phone I've installed:
- phonealarm (great appz for changing profiles and displaying sms / vmail / email / missed calls)
- Wisbar Advanced 2 (great launcher)
- Cyberon BT voice dialer (not sure how it's not included with the phone)
- Resco File Explorer
- Resco Picture Viewer
- Mapopolis
- Intelligolf
- Sprite backup (works well, but extremely slow if launched from the PPC)
- eWallet
Thanks! Any comment / suggestions is appreciated!
Number16, welcome to the board.
I'm afraid I don't have time for a thorough response right now, but some thoughts:
- please read the board rules. Posting a thread with a useful topic title will get you more help, faster. It's in your interest.
- read the wiki and do search the board. The Magician is still my favourite phone, and we've all spent years posting about issues for it. It's likely most of your concerns have already been discussed.
- specifically read the wiki on favourite software. It's far from complete, but it'll point you in the right direction. Someone asks the question every 4.7 minutes, precisely, day and night, so you will find other more detailed responses elsewhere. My recommendations: get gsfinder, claunch and SmallMenuPlus NOW.
- investigate the BigStorage Rom hack. (see Wiki)
Will try to post more later if possible.
V
apart from games I'd recommend the following:
1. Eye on privacy
2. XCPU Scalar
3. SPB plus
4. HiCalc
5. Novii remote
6. imusic
I would recommend;
AE Button plus
Allows you to map up to 3 functions per button, works great on the magician
+ its free
http://www.pocketgear.com/software_detail.asp?id=20322
"Total commander" is a great free file explorer
"Mortscript" is a useful for custom tweaking
"PHM Traylaunch" put shortcuts in the System Tool Tray
Also search this forum for a sound tweak that vastly improves audio quality when listening to music via headphones
& checkout http://www.pocketpcfreewares.com/en/index.php
Thanks guys, great advices there.
Speaking of AE Button plus, I installed the (free) ver 1.0.1 but somehow it only works for the contact and schedule button. I didn't re-assign the TALK/END buttons because it says if I do I won't be able to use these buttons in the dialer.
And somehow AE Button also doesn't work for the camera and record buttons (on the side) neither ... if I re-assign some other tasks to them, they don't bring up the camera application but won't start the intended application neither. I just hear a few beeps and nothing happen.
Does the paid version of AEB Plus improve that?
Sorry if I've gone off-topic here...
number16 said:
Thanks guys, great advices there.
Speaking of AE Button plus, I installed the (free) ver 1.0.1 but somehow it only works for the contact and schedule button. I didn't re-assign the TALK/END buttons because it says if I do I won't be able to use these buttons in the dialer.
And somehow AE Button also doesn't work for the camera and record buttons (on the side) neither ... if I re-assign some other tasks to them, they don't bring up the camera application but won't start the intended application neither. I just hear a few beeps and nothing happen.
Does the paid version of AEB Plus improve that?
Sorry if I've gone off-topic here...
Click to expand...
Click to collapse
That's the same version as i'm using. Works on my contact & calender buttons & on my camera & record buttons perfectly, I use the camera button for the camera & flight mode toggle, I have mortscripts assigned to the other buttons which changes the buttons functions depending on what program is in the active window.
I find this easier to use stylus free than WM5 (I also own a Universal & a Prophet for the wife)
From your first post it sounds as your devise is a bit buggy, might be worth doing a hard reset or flashing it with a custom ROM.
A well setup Magician is an almost perfect PDA/Mobile phone balance
Have fun.
PS; Try the free trail for the paid version of AE Button & see if you like it.
Mister B said:
That's the same version as i'm using. Works on my contact & calender buttons & on my camera & record buttons perfectly, I use the camera button for the camera & flight mode toggle, I have mortscripts assigned to the other buttons which changes the buttons functions depending on what program is in the active window.
I find this easier to use stylus free than WM5 (I also own a Universal & a Prophet for the wife)
From your first post it sounds as your devise is a bit buggy, might be worth doing a hard reset or flashing it with a custom ROM.
A well setup Magician is an almost perfect PDA/Mobile phone balance
Have fun.
PS; Try the free trail for the paid version of AE Button & see if you like it.
Click to expand...
Click to collapse
i have 2.5.1 registered version i cant figure how to toggle flight mode operation..help plz and i wanna ask if we can put magician on vibrate mode with any any key ???
max414 said:
i have 2.5.1 registered version i cant figure how to toggle flight mode operation..help plz and i wanna ask if we can put magician on vibrate mode with any any key ???
Click to expand...
Click to collapse
Flight mode toggle
Download from link below then unzip & copy the program below to your phone or sd card, then create a shortcut to it in your programs folder (if you have a shortcut in your programs folder, it will show up in the menu in Buttons). Then go to "Settings>Buttons" & pick what button you want to link to the flight mode toggle program.
Vibrate mode toggle
You could create a batch file to use with Mortscript (freeware) which would turn your vibrate on & off, then link this batch file to a button.
Its quite easy to do, do a search for Mortscript. If you need help let me know & i'll write the script for you & give you what help I can in setting it up.
Mortscript is a great bit of software which can enable you to solve a few problems so its worth doing some research on it.
http://myweb.tiscali.co.uk/pdamagician/wm2003sewm5software.html
http://myweb.tiscali.co.uk/pdamagician/Downloads/tel.on-off_100.zip
Mister B said:
Flight mode toggle
Unzip & copy the program below to your phone or sd card, then create a shortcut to it in your programs folder (if you have a shortcut in your programs folder, it will show up in the menu in Buttons). Then go to "Settings>Buttons" & pick what button you want to link to the flight mode toggle program.
Vibrate mode toggle
You could create a batch file to use with Mortscript (freeware) which would turn your vibrate on & off, then link this batch file to a button.
Its quite easy to do, do a search for Mortscript. If you need help let me know & i'll write the script for you & give you what help I can in setting it up.
Mortscript is a great bit of software which can enable you to solve a few problems so its worth doing some research on it.
Click to expand...
Click to collapse
i have got mort script but it s too much for my little brain......if was hoping if u could provide the file i will assign it a button ...looking forward to your help...thx for flight mode toggle
I've got the paid version of AE Buttons Plus and it still runs a little funny sometimes ... certain buttons will work from time to time. For example, I left "single click" for Button1 untouched (which should be Calender by default) and "double click" would start Notes. Well, it starts Notes on double-click all right, but from time to times single-click wouldn't do anything. A reset usually fixes the problem, but then it'll happen again after a while.
So instead of leaving "single click" for the button un-assigned, I've assigned it to Run Appz -> Notes. That did the trick so far.
I also find that Wisbar Advanced 2 is causing quite a bit of problem ... anybody else has problem with it? With WA2, PhoneAlarm and AEButtons running at the same time, the Magician gets pretty unstable. It's a lot better if I don't load WA2.
Which is too bad, cos i've been a fan of Wisbar from long ago (well, it was a freeware then) ... anybody has any suggestion for a taskbar launcher? I really don't want something that's too busy looking, and I don't like clauncher ... I use the today screen for caleder plugin's and what not.
Thanks,
max414 said:
i have got mort script but it s too much for my little brain......if was hoping if u could provide the file i will assign it a button ...looking forward to your help...thx for flight mode toggle
Click to expand...
Click to collapse
"max414"
I've sent you a private message rather than go further off topic on this thread.
Check your private messages & get back to me.
If you guys interested have a look at the 10 Best Softwares
Comments?
Here's my 2 cents on this '10best software' list ... befoer I start I gotta say for the most part I don't agree with it, for 1 reason or another.
1. Wisbar Advanced / Desktop.
Ok, I really like Wisbar, dating back to the PPC2002 times. It was a smart little program that worked very well as a launcher and took up close to nothing in terms of memory and storage, and better, it was a freeware. The Wisbar advanced these days though, is a memory hog for what it does. It may not be a problem on somehting like a x51v, but on a device like the Magician it really isn't the best solution for launcher. Plus, I dunno if it's just me, but I ran into all kinds of software problems with Wisbar advanced 2, potentially caused by software conflict with other softwares I have. Maybe someone else have better luck with WA2 though.
2. PocketBreeze
Never really used it, but personally I'm not a fan of busy today screen ... but that's just me.
3. PocketWeather
DOn't know why I'd pay for this software when I can get ADBWeather for free.
4. PocketMusic
I used PocketMusic in the PPC2002 days, and it's not bad ... but these days when you can get GSPlayer for free, it gives PM a run for the $$.
5. RescoFileExplorer
No question about this one. Always the first program I install after a hard-reset, 'nuff said.
6. Memmaid / PocketMechanics
I use Memmaid and it's great. Never used PocketMechanics
7. QuickNotes
Never used it ... so can't really say.
8. SPB Backup
I used Sprite Backup on my old PPC so I continue to use it on the Magician. Other than being rather slow when it scans your device, I have no complaint about Sprite. I never used SPB so I can't compare.
9. Internet Browser
Haven't tried anything other than IE so can't say ...
10. Theft Alarm
Well, I use eWallet to store all the sensitive information ... never used theft alarm so can't say.
I guess that's just the list for PPC ... because for PPC phones, I'd say PhoneAlarm's one of the top 'must-get' softwares for sure.
Hi. I frequently turn off my phone using the Comm Manager while leaving the PDA on during the evening. In the morning, I frequently forget to turn the phone back on and I was wondering if there was a program that can turn on (and perhaps turn off) the phone using the Comm Manager at a set time. Thanks.
Phone: 8125 on WM5 with original ROM
I'm looking for something like SleepWell.
http://www.connectivetools.com/sleepwell.html
The problem is that this program works only for smartphones. I tried it on my 8125 and it doesn't work. Moreover, the program deposited 300Kb of data which I can't seem to get rid of even after uninstalling it. But I'm still looking for such a program. Thanks.
Try Mortscript (Freeware). you can write a simple script that will set a notification event (or whatever it's called). I use it to run weather watcher automatically every morning. there are several forum strings, here and on others that have examples of different scripts that you can modify for your own needs. just do a google search for Mortscript, and Mortscript examples. It also has documentation included. Learning to use Mortscript will give you more control over your device than you ever though was possible.
I didn't think of MortScript, but even if I had, I don't have the technical know how to create do what I wish with a nice GUI.
This program is an evolution of the first I made. It will route the audio to the earpiece when an certain program is running.
I put the program here because I have test it in wizard, if people test this in others phones and it works, please post here and maybe move this this thread to an more "generic" forum.
the program MUST be under "\($program files)\audioswitch" folder, you must unzip the contents to this folder.
the configuration file (command.txt) is under this format:
1000
skype
fring
etc
the first line is the delay(in miliseconds) in witch the program will "look" if a program in the list is in the top level window, faster phone, smaller delays, I recommend 1000 ms.
the next 20 lines are the programs you want the audio to be routed to the earpiece(max 20 lines for now).
Again the program is under the "do it on your own risk" and "I am not responsible for anything" licence. And,of course, it is free!! Do not sell it!
It is manly intended for little expert users, as it is still in "beta" fase, hehehe.
How it works:
the program runs in an eternal loop and look for the title of the current window that is displayed for the user in a time interval.
When the program mach the title window with one of the names user configured it it will switch the audio, when the program is not running anymore, the audio will swich back.
Do not launch two or more instances of the program at the same time, could really mess things up. -- se the forum (thanks tucahara)
To stop the program, u must use a process manager.
it would be good if someone could make a cab to install it. -- done see the forum (thanks tucahara)
this is still a beta, I intend to make ajustments as people give feedback.
Thanks,
hope u like.
-----first update---
now, an file called "audioswitch_error.txt" in the root directory will hold the error messages.
------------ List - Working ------------
wizard - I tested
P3301 or P3300 - I tested
att tilt - I tested
touch 3452 and 3450
touch dual
touch cruise
touch HD
Sony Ericsson Xperia X1
BenQ E72
Titan --> see the forum
------------ List - NOT working ------------
T-Mobile Diamond
HTC Touch by Sprint
Samsung SGH-i780
------------------------------------------------------------------------------------
check the new thread at:
http://forum.xda-developers.com/showthread.php?t=502361
new aproach to do the switch and now open source, even with an class that others can improve and put in other apps...
Some people complain about me not openning the source of the app, I have just made this way because there was proprietary code inside and I had no time to rewrite it without the proprietary code.
I have made the best I could, and now I had some time and rewrite the app in open source, to those who only complain about it, get the code and make it better instead of complaining!
Thanks for all that encourage me to continue the work and helped the development.
will retire this project for while...
thanks u all.
Audioswitch for Skype
On HTC Touch by Sprint (CDMA, also known as Vogue), audioswitch does switch the audio in the Skype 2.5 windows mobile PPC from external speaker to handset. Unfortunately, the microphone is then also disabled. I hope you'll be able to tweak your audioswitch to resolve this.
Thank you so much for developing this wonderful applet. I'm sure you will have the gratitude of many frustrated Skype windows mobile users.
What really happens is that when the sound output is switched in some phones, the microphone gain changes too. This happens because the phone thinks it is a "normal call".
Most of the times the mic gain increases, but in your phone it must be decreasing. Try to figure out in registry where the mic gain controls are recorded and chage all of then to the same value. I had this issue with my P3301 and solved this way, but there is quite a time now and I do not remenber where are the reg keys to change, but I have found the information here in the forum.
I will try to figure out for other "hack" to solve this issue... thanks for reply.
doesn't work at T-Mobile Compact IV (aka Diamond)
Sound went to loudspeaker....
PS: fring last version working fine with sound at mine phone (without any additional programms). Sound is going to correct destination automatically
I just tried the latest version of Fring, which automatically switches audio to earpiece when call is connected.
The same issue occurs with the new Fring as I described above with your audioswitch program: I can hear audio through earpiece, but microphone doesn't work (or is inaudible).
I couldn't find a tweak or registry hack to correct this. Any help would be greatly appreciated.
MarceloFB said:
This program is an evolution of the first I made. It will route the audio to the earpiece when an certain program is running.
I put the program here because I have test it in wizard, if people test this in others phones and it works, please post here and maybe move this this thread to an more "generic" forum.
the program MUST be under "\($program files)\audioswitch" folder, you must unzip the contents to this folder.
the configuration file (command.txt) is under this format:
1000
skype
fring
etc
the first line is the delay(in miliseconds) in witch the program will "look" if a program in the list is in the top level window, faster phone, smaller delays, I recommend 1000 ms.
the next 20 lines are the programs you want the audio to be routed to the earpiece(max 20 lines for now).
Again the program is under the "do it on your own risk" and "I am not responsible for anything" licence. And,of course, it is free!! Do not sell it!
It is manly intended for little expert users, as it is still in "beta" fase, hehehe.
How it works:
the program runs in an eternal loop and look for the title of the current window that is displayed for the user in a time interval.
When the program mach the title window with one of the names user configured it it will switch the audio, when the program is not running anymore, the audio will swich back.
it would be good if someone could make a cab to install it.
this is still a beta, I intend to make ajustments as people give feedback.
If someone like this program and wants to make an donation...
https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=4WLQVA6LTKWSL&lc=GB&item_name=marcelofb&item_number=marcelofbxdadonations¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG_global%2egif%3aNonHosted
Thanks,
hope u like.
Click to expand...
Click to collapse
I have an idea. Rather than regularly polling to see what the current windows is, why not use a windows hook to monitor windows messages. When you see a message indicating a window has come to the foreground test it against your list of windows and enable/disable audio switch as necessary. Use SetWindowsHookEx and hook for WH_CBT messages. If you are unfamiliar with using SetWindowsHookEx I could supply you with the hooking code and all you would need to do is insert the code to check the window names, enable the audio switch, and disable the audio switch. Or you could send me the enable/disable routines.
Another tip, I noticed that skype places an icon in the notification area during a call. If there is someway of detecting the notification icon that could be another great way to trigger the switch.
Great program though. Works beautifully.
OOOH
If this program works on the new BenQ E72 I'm getting in a couple of days I'll certainly donate!
THANKYOUTHANKYOUTHANKYOU
hello,
it does not work on hermes (tytn).
by the way "troca2" does work on hermes! - maybe you guys want to work together?
baal_zebub said:
hello,
it does not work on hermes (tytn).
by the way "troca2" does work on hermes! - maybe you guys want to work together?
Click to expand...
Click to collapse
hehhehe, I made troca2, I will see if the switch code is the same or if I have made some mistake...
are u sure you have put the program in the correct directory?? I will make some modifications to have an error feedback. So u can see if something is wrong...
JKingDev said:
I have an idea. Rather than regularly polling to see what the current windows is, why not use a windows hook to monitor windows messages. When you see a message indicating a window has come to the foreground test it against your list of windows and enable/disable audio switch as necessary. Use SetWindowsHookEx and hook for WH_CBT messages. If you are unfamiliar with using SetWindowsHookEx I could supply you with the hooking code and all you would need to do is insert the code to check the window names, enable the audio switch, and disable the audio switch. Or you could send me the enable/disable routines.
Another tip, I noticed that skype places an icon in the notification area during a call. If there is someway of detecting the notification icon that could be another great way to trigger the switch.
Great program though. Works beautifully.
Click to expand...
Click to collapse
It is a good idea to use hook, I have not think of it!
I use a proprietary code included in a lib at the company I work for to make the "switch" but it is not different of what u find here in the forum.
Maybe we can make an effort to re-make it with hooks...
so this program must run all the time? after every softreset you have to start it?
is it not easier with mortscript (for example) to make an shortcut that opens skype as well as the audioswitch program? and closes the audioswithc program when you close skype?
I am using it right now and it seems to work perfect:
i used this script after installing mortscript (http://www.sto-helit.de/):
run( "\Windows\SkypeSoundSwitch.exe" )
runwait( "\Program Files\Skype\Skype.exe" )
close( "troca2" )
(see that in my case i downloaded your original program and renamed it to skypesoundswitch.exe and put it in the windows map)
I renamed it so i could remember what the purpose the file had.. changed nothing but the name!
Thanks for the program by the way! it always worked perfect!!
so to sum up the way i have it now (most files included) on my xperia x1:
1) installed skype
2) installed mortscript
3) add skypesoundswitch to \windows\....
3) add skype.mscr to \.... (root)
4) overwrite skype.lnk with the new skype.lnk in \windows\start menu\programs\..
in the way whenever i open skype(.lnk), it opens skype.mscr, this opens skypesoundswitch.exe and than skype.exe... when you close skype.exe it closes skypesoundswitch.exe...
it seems to work perfect.. but hey maybe i am doing something totally wrong here.. than just shout!
by the way, the .mscr and the .lnk files are offcourse edit-able .. so you can put the files everywhere you like..
madhijs said:
so this program must run all the time? after every softreset you have to start it?
is it not easier with mortscript (for example) to make an shortcut that opens skype as well as the audioswitch program? and closes the audioswithc program when you close skype?
I am using it right now and it seems to work perfect:
i used this script after installing mortscript (http://www.sto-helit.de/):
run( "\Windows\SkypeSoundSwitch.exe" )
runwait( "\Program Files\Skype\Skype.exe" )
close( "troca2" )
(see that in my case i downloaded your original program and renamed it to skypesoundswitch.exe and put it in the windows map)
I renamed it so i could remember what the purpose the file had.. changed nothing but the name!
Thanks for the program by the way! it always worked perfect!!
Click to expand...
Click to collapse
That works great too. The advantage of this new program is that it will only reroute the audio when skype is in the foreground. You could minimize skype and leave it running, and audioswitch will automatically restore your sound. Get a call and open up skype and your sound goes back to the earpiece.
I will create the code to do it with a windows hook when I get a chance MarceloFB. Please pm me your email address. All you will have to do is insert the code to read the config file, check the window names, and when necessary enable or disable the switch. Or please show me where to find details on how to code this myself. Thanks!
Hat off to both of you and really glad that we will have a much improved solution.
JKingDev said:
That works great too. The advantage of this new program is that it will only reroute the audio when skype is in the foreground. You could minimize skype and leave it running, and audioswitch will automatically restore your sound. Get a call and open up skype and your sound goes back to the earpiece.
I will create the code to do it with a windows hook when I get a chance MarceloFB. Please pm me your email address. All you have to do is insert the code to read the config file, check the window names, and when necessary enable or disable the switch.
Click to expand...
Click to collapse
okay! I only used skype to make calls and than get offline so this way did the trick for me! but i have to admit it would be much better when i can keep skype online!
this new program does the trick indeed! it changes the output back when i minimize skype!
But still my question above, you have to start this program on every startup isn't it? what does it do with the battery?
madhijs said:
okay! I only used skype to make calls and than get offline so this way did the trick for me! but i have to admit it would be much better when i can keep skype online!
this new program does the trick indeed! it changes the output back when i minimize skype!
But still my question above, you have to start this program on every startup isn't it? what does it do with the battery?
Click to expand...
Click to collapse
Yes it must be run at startup but placing a link in your startup folder will make everything transparent to the user. I don't think there will be an effect at startup. In it's current form it must check every second (or whatever you set the timeout to), but its only a little bit of code. I am not really sure if that will really have an effect. The more often it checks the faster it will switch when you open skype, but also the more processor use. Check less often and it uses less processor, but there might be a delay in switching the audio. I proposed doing it by hooks though because this would use even less processor. The app will only check when a new window takes focus, rather than just periodically checking. This way it only checks when it needs to and will always switch instantly.
I am glad u liked the program.
I will try to answer most of the questions...
1- JKingDev:
I have though in your idea of using hooks, but if I use a hook, the program will have a loop anyway to check for the messages(hidden loop ;-) ), and it would have to have an "fake window" or something to process the messages. This way we have only one loop, in a very simple command line program with high optimization, so we have to think what is really the best way of doing it... I will pm u as soon I have any time to "program" again. hehe
2- people that uses mortscript with the old "troca2"
I will try to make a way to make this program work the same way as troca2, maybe with an "argc argv", wait the next update.
3- the battery life??
if u notice any battery life decreasing with the usage of the program, configure a bigger delay, maybe 5000ms, it is a matter of adjust the "timming" for each processor. Post your results here so others can find the optimum value for the delay in their phones.
4- have to start the program every reset?
yes, just put it in the startup folder.
maybe someone can make an cab that put the program in the right place and a link in the startup, it would be cool! I dont have an easy program to deal with cabs, and the vs projects for cabs.... I really cant make that thing work!!
well it is only the batterylife i was worried about. but i'll try running the phone this weekend with the program running and doing some skype.. lets see how it turns out!
For folks who have issues of mic on using this program, there is a quick solution for this problem. You can try sjphone. It provides a internal mic volume control. However, the major setback is that it's only working in wm5.
my 2 cents
weekendli said:
For folks who have issues of mic on using this program, there is a quick solution for this problem. You can try sjphone. It provides a internal mic volume control. However, the major setback is that it's only working in wm5.
my 2 cents
Click to expand...
Click to collapse
will check this, but people reported that worked in xperia... and it is running in my P3301... anyway, will check and post an wm6 build if it is the case... check the error file and see if it tells anything.
Other thing, this program uses low level api`s, so your windows MUST be fully unlocked for it to work in wm6.