Ok, here's the thing:
Yesterday, i upgraded my Herald from WM5 to WM6. Everything worked fine, i was very happy! I discovered the 5-tab-Homescreen which i installed afterwards, and it worked. As i went to bed last night, i hadn't plugged my herald in, so he didn't charge. Now everytime i try to start the device, it crashes after the Windows Mobile 6 bootscreen! And restarts the device.
I'm really freaked right now... pls help me!
Solution!
i've found it myself...
Just pull out the MicroSD + SIM card and restart the device!
http://www.modaco.com/Continuous-reboots-t256186.html
There's the fix for it.
Related
Hy could someone help me,
A day ago, my battery flated out, so phone did shut down, when i got home and charged it, i already werent working.. wm6 does starting to load up..
So, when its started up first screen comes up everything looks fine, then it goes to 2nd screen and then nothing happening.
i did hardspl to it ages ago, but what sould i do now? i tryed to reflash it with the same rom, but it sais that it cant find devise. i've tryid to do the same in bootloader mode, doensnt do anything ither.
so what should i do? plz help me, i cant live without cell.. its so wierd without it.
try flashing with ur microsd card
thanks its worked
Hi my friends. I hope you help me in my problem. I have a prophet. For a long time i had installed wm6 touch evolution rom. This afternoon i had the phone closed and when i turned iit on it didn't load windows but when the windows mobile screen appeared i heard a sound and the phone turned off. I restarted and restarted for many times but nothing... I did a hard reset but the same problem. The bootscreen appears and when the screen changes to windows mobile bootscreen i hear a sound and then the device stuck. I installed the same rom i already had but the same problem. Then i decided to install the original rom O2 Germany but for one time again i had the same and the same problem. What can i do? Can this problem be fixed?
Hi guys. I think that i have find what is going wrong. I reinstalled O2 Germany rom and when the installation finished the phone is restarting. That time i didn't discinnected from usb cable and the phone didn't restarted or stuck. Is it possible that the batterrie has problem? The phone is starting only if it is connected to current via usb or via electric charger. Is this possible? My batterrie didn't have problem since this afternoon. When the batterrie was fully charged its duration was 2-3 days. Please give me a reason
I have a cingular 8525 (Herm100) that I was running windows 6.5 on from Scotty 93.
This ROM the HTC Home version.
Recently it started hard resetting randomly and finally the last time it hard reset on its own, it became stuck in bootloader mode. Whenever I try to flash a Rom on it everything works fine and the progress bar comes up until the very end. As soon as the progress bar disappears, the Rom should boot but the bootloader just comes back up. I have HardSPL 2.10 from Olipro on it.
I looked at common bricked hermes cases and it didnt fit any of them. I have run out of ideas of what to do. Any help would be greatly appreciated.
Nevermind
wow. nevermind. I think I may have fixed it It seems like it has an internal battery or something because I had to remove the battery and let it sit for an extended period of time before it would start to boot up normally. Then when it did, I just flashed the old prerequisite ROM as soon as I could establish a connection with my computer. It seems to be working totally fine now.
Hi all, started to try and get phone onto android last night.
Followed the guide for HSPL3 then started started to update radio but got error about USB!
Booted into boot screen to see whats going on (volume down) and it wont go past loading! just sits saying loading!
The device boots ok and i get windows (eventualy! if i wait) Once booted into windows USB works but in the bootloader i cant get USB!
I have pressed volume down and red button and in white box it stays on serial!
I have googled for hours any pointers?
GazWales said:
Booted into boot screen to see whats going on (volume down) and it wont go past loading! just sits saying loading!
Click to expand...
Click to collapse
grey screen, writing in blue? sounds like it thinks you have a rom on your sd card. try it without the sd card in.
Thanks for you suggestion - tired that already should have said.
The issue is fixed however - I took out SIM aswell as SD, manualy booted to loader. Waited 5 min then it changed to USB! Quickly opened HSPL3 an re flashed.
Issue was still the same! So followed same procedure and used HSPL 1.6 that fixed it! I can then flash with a rom suitable for Android!
Flashed 4 min later, put Android on - now loving my new phone - its amazing the difference! This is how the HTC HD2 should have been!
heh, lucky you, i've tried android on 6 different occasions now, first four times i wasted some hours and never got it to boot, 5th and 6th time it worked, but when i restarted, the phone wouldn't restart without a hard reset, so i'm not touching it again for at least another three months.
Thanks. Your solution worked great. As soon as I pulled the SIM and waited a few minutes it popped right up. You should mark this thread title as solved
@samsamuel try using nand its alot easier to install and there are some great builds on this website!
Sent from my Gingerbreaded HTC HD2 using XDA App
Hi there,
the problem is not solved for me!
I flashed my HD2 several times before, using winXP. Now I got a new laptop with
Win 7 64 bit. I want to flash my phone with a WM6.5 Dutty ROM. The phone syncs fine when running but when it switches to bootloader, the laptop doesn't recognize the phone anymore. It does not switch to USB and on the Laptop I get the message that there is no driver for "Qualcomm CDMA technologies MSM"
Help please, I tried to find some answers but couldn't find anything!
Thanks.
klumpbatsch said:
Hi there,
the problem is not solved for me!
I flashed my HD2 several times before, using winXP. Now I got a new laptop with
Win 7 64 bit. I want to flash my phone with a WM6.5 Dutty ROM. The phone syncs fine when running but when it switches to bootloader, the laptop doesn't recognize the phone anymore. It does not switch to USB and on the Laptop I get the message that there is no driver for "Qualcomm CDMA technologies MSM"
Help please, I tried to find some answers but couldn't find anything!
Thanks.
Click to expand...
Click to collapse
Mate, check my suggestion at your other post (you started a new thread today!)
Hello,
I searched the internet for about 2 hours and couldn't find a solution, thats the reason why im opening this thread, im stuck.
Before i did following steps, the phone wouldt boot into winmo, it was constantly rebooting.
So i tried to flash a new rom.
It was really difficult to flash the phone because i couldnt use hspl it froze every time i tried, so i got uspl working after a few attempts. I flashed this rom:
http://forum.xda-developers.com/showthread.php?t=671277
after sucesfully flashing i turned the phone on, same issue, it got stuck in a boot loop.
So i decided to get the phone fully charged again an leave it for like an hour, after the break i restarted it and it worked nicely. So it was time to get the sd card in the slot and the sim, so i did a quick restart... but since then im having the same issues again, stuck in a boot loop, no matter what i do, even if i take out all the cards still happens. I tried to wait and charge, but no sucess...
i have no idea why the phone isnt starting winmo, but it drives me creazy...
32MB
SPL 1.54
anyone have any ideas, had same problems? Looking forward to hear from you.
Thanks in advance
________________________________
Found the problem, the battery connector seems to be broken, as long as i push against the battery the phone works nicely. unfortunatly this means good bye.
hi,
it´s the same problem for me. tryed different hardspl, uspl but no change.
ist restarts sometime direct after the bootloader and sometime it starts normaly and then restart.
i´ve changed the battery but it don´t solve the problem.
any suggestions?