Hi all
Can anyone send me the following registry key (and subkeys) please (of the HTC TyTN / Hermes)
HKLM\SOFTWARE\Microsoft\Shell\Keys
I have a problem with my power button and I've discovered that some values are missing in this registry key.
P.S.: If possible, please send me the configuration from an original rom without any third party software.
Many thanks!
nero said:
Hi all
Can anyone send me the following registry key (and subkeys) please (of the HTC TyTN / Hermes)
HKLM\SOFTWARE\Microsoft\Shell\Keys
I have a problem with my power button and I've discovered that some values are missing in this registry key.
P.S.: If possible, please send me the configuration from an original rom without any third party software.
Many thanks!
Click to expand...
Click to collapse
Hopefully Keys attached
Mike
many thanks Mike
but "Button 6" configuration is missing... is that alright?
by default there is no configuration for this button?
nero said:
many thanks Mike
but "Button 6" configuration is missing... is that alright?
by default there is no configuration for this button?
Click to expand...
Click to collapse
Yes, until now I had not noticed that but that is indeed true on mine. I have also not carried out any customisation or even reset any of these buttons (well since last HR anyway)
Mike
Hi again Mike!
Ok, I've deleted the "HKLM\SOFTWARE\Microsoft\Shell\Keys\40C5" key and now the power button works perfectly.
I have wisbar advance 2 installed and probably, somehow I think, messing arround in his settings has created the power button mapping and that makes his behaviour anoying...
Maybe this is a solution for some other people with this problem. I've seen there are more people in the forum with the "power button problem".
Many thanks.
Power Button
Good news.
Had not seen others with the problem of the "power button" but if I spot them I'll link to here and by repeating power button problem hopefully searches will lead here!!!!
Mike
checkout this one here
people saying that need to do a soft-reset...
is what I have been doing when the power button get stucked and it is not anymore
nero said:
checkout this one here
people saying that need to do a soft-reset...
is what I have been doing when the power button get stucked and it is not anymore
Click to expand...
Click to collapse
Well now, I wonder!
Perhaps you could write up a detailed piece on exactly what was happening and then the exact detail of what you did/changed. I have a pretty good picture but if you get the time the old blow by blow account would be useful.
Cheers
Mike
going to bed now-enough problems for one day!!!
Mike,
sorry but I dont know exactly what you want to say with "old blow by blow account". My native language is not english and I dont know that expression.
I can say that my power/toggle screen button becomes "non responsive" in the past couple of days, sometimes works after 3/4 presses or after a long press but other times I need to do a sw reset pressing with the stylus in the reset button/hole.
What I did to fix this malfunction is what I've described in this thread's 5 post (here)
I've used resco's Registry Editor and deleted the key "HKLM\SOFTWARE\Microsoft\Shell\Keys\40C5" and all of it's contents.
Now the power/toggle screen button works perfectly!
If you need some more information, just do has one of our tv commercial
"explains it as if I am too much donkey"
Cheers,
Nero
I'm from Portugal.. same GMT, sweet dreams
Would this make it in a wizard too?
Hi guys, I have a wizard with the power button inoperant, everything else looks work fine... I tried several tricks given in the forums and those are great to power it off but not for turning on the phone niether the display on. Would this make it in the wizard too?
Luiggi, take a backup of your registry (Everyone should before registry editing), and just try it!
V
Hi Guys,
does anyone know how to reconfigure the video-call button (the little button above the green button). I don't use this one, en would like to give it another function)
Thx!
Thanks VJ
vijay555 said:
Luiggi, take a backup of your registry (Everyone should before registry editing), and just try it!
V
Click to expand...
Click to collapse
Thank you Vijay I took a look to the 8125 registry and is quite different, i´m afraid this wouldn´t work for the Wizard. I´ve tried also a couple of your programas (VJKeypress and VJEscahaton) but can´t help either, my problem is to turn the phone on (i´ve been using softreset during a connection to the power supply) and all indicates that this is a hardware issue... any thoughts?
Take a full backup (eg SPB Backup) then hardreset. Test if a clean rom still has the problem. If it does, it's a hardware issue, get it repaired.
Otherwise, if it's software, list what you've got or rebuild your installation.
V
It died like a hero....
vijay555 said:
Take a full backup (eg SPB Backup) then hardreset. Test if a clean rom still has the problem. If it does, it's a hardware issue, get it repaired.
Otherwise, if it's software, list what you've got or rebuild your installation.
V
Click to expand...
Click to collapse
I follow your advice and @ 80% of flashing stalls for awhile with the progress bar in red, after some minutes proceeded turning the progress bar in blue color and @ 95% progress I got ERROR326 : INVALID COMMAND "With the legend "This NBF file can not be used for your phone. Please check your NBF file" The screen was white with the 95% progress bar and lost connection with the PC, I tried a softreset and what I got was the tricolor scren with IPL / SPL data and RUU at the top right. I´m afraid that we have another G4 casualty...
And few hours later.......
I reflashed the phone with RUU_RIsidoro_2.26.10.2_WWE+CF2SP1_G4 this time it went to the 100% progress and the congratulation screen for a succesful flashing, however stalls in bootloader screen (this time without the RUU inthe top right), whenever I do a softreset (since the on / off button still is not working) The HTC innovation splash screen shows up, then disappears and my Wizard returns to the bootloader mode. I think I should be moving to the Wizard forums, thank you VJ!
Could someone dump for me some registry values ?
Section:HKLM/Software/Microsoft/Shell/Keys/*
I've got:
40C1
40C2
40C3
40C4
I think that i don't have 2 values:
40C5 ?
40C6 ?
If someone have got it and tel me what i have to write to registry I would be pleased
Regards
Sariel
sariel said:
Could someone dump for me some registry values ?
Section:HKLM/Software/Microsoft/Shell/Keys/*
I've got:
40C1
40C2
40C3
40C4
I think that i don't have 2 values:
40C5 ?
40C6 ?
If someone have got it and tel me what i have to write to registry I would be pleased
Regards
Sariel
Click to expand...
Click to collapse
Hi
Seems to skip 5 and go to 6/7
Attached keys
Cheers
Mike
THX Man I've copied button 6 and 7 from yours part of registry and it works THX for help
Regards
Sariel
Did you try the Buttons applet in Control Panel? Didn't it list all five hardware buttons?
Yes there are 5 buttons + virtual 5 (Press & Hold).
For this stage 2 of my hardware buttons doesn't work.
1. OK button :/
2. Left button (over windows key)
Mabey some one have registry values for those 2 hardware buttons ?
Reg
Sariel
P.S. I'm trying to recover my Hermes without reinstall OS. All taht **** happend after I instaled AEBPlus :/
Hi all
I'm wanting to know If anyone has successfully assigned the CommManager Program to the Voicecommander Hardware button, and if so can you please explain how you did it??
I've found the threads on this forum regarding this issue and have tried several of them step by step but the CommManager Program will not show up in the button assignment section.
I'm wanting to have it, so when you press the VoiceCommand button the CommManager program will start.
Any Help will be much appreciated
Many Thanks
Roman
romanf said:
Hi all
I'm wanting to know If anyone has successfully assigned the CommManager Program to the Voicecommander Hardware button, and if so can you please explain how you did it??
I've found the threads on this forum regarding this issue and have tried several of them step by step but the CommManager Program will not show up in the button assignment section.
I'm wanting to have it, so when you press the VoiceCommand button the CommManager program will start.
Any Help will be much appreciated
Many Thanks
Roman
Click to expand...
Click to collapse
I use iLauncher to that exact thing. You can download it and try it. There are other button mappers around that would work too I suppose.
I am trying to lock all soft and hardware buttons down on M700 unit except the power off button and the red phone button
I have had a bit of success with
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Keys\40C1]
@="\"\\Windows\\AppButtons\\Voice Speed Dial.lnk\""
"Name"="Button 1"
"Icon"="\\windows\\blank.exe, 0"
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Keys\40C4]
@="\"\\Windows\\AppButtons\\Camera.lnk\""
"Name"="Button 2"
"Icon"="\\windows\\blank.exe, 0"
"ResetCmd"="\"\\Windows\\AppButtons\\Camera.lnk\""
"Flags"=dword:9
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Keys\40C6]
@="\"\\Windows\\AppButtons\\Record.lnk\" -b"
"Name"="Button 1(Press & Hold)"
"Icon"="\\windows\\blank.exe, 0" ;Record
"ResetCmd"="\"\\Windows\\AppButtons\\Record.lnk\" -b"
"Flags"=dword:9
Unfortunately I am unable to lock down the
SIDE OK,FRONT OK , GREEN PHONE & WINDOWS BUTTON.
AE Buttons isnt really an alternative at the moment as this can still be overidden
Is there any registry tweaks that can be done to disable these buttons, AE Buttons will also not let me do this..
Can anyone help, its driving me mad!!!
I have been successfull on the prophet & artemis by writting a driver to work with the std keybddr.dll but this will not work with the prophet
Is there any simple way to lock all above buttons down except the power and red phone
PLEASE PLEASE HELP
COULD IT BE IN THE ACTUAL ROM OF THE M700 the reason I ask is when I dump the WM5 rom it doesnt dump the keyboard driver
Answers on a postcard
Thanks
I am able to map every button of by trinity using ae. not quite sure of what you mean by lock down, but in theory you deactivate all of them.
Is there a way to set the Red key to close (totally) the app that you're running?
iae button plus can just do that.
ww2250 said:
iae button plus can just do that.
Click to expand...
Click to collapse
Thank you!
Hi there,
i'm searching for the possibility to configure the Volume-Buttons into the "down" and "up"-Keys from older HTC Smartphones.
I've tried different tools, (e.g. VolDpad, Vito Button Mapper, AEBPlus) but nothing could be used. There is no useable key in the buttonconfiguration from Windows Mobile.
What could i do?
Greetings from Germany.
+1
I need the same.
same for me
no ideas? please