Hi,
I can't enabled the wireless. I can update to AKU3.3.13.ASERG-us but when I try to update the ipl (it still are with 1.00) or another rom version it reboot alone.
Can anyone help me please?
Thanks.
IPL: 1.00
SPL: 2.13
GSM: 2.20
OS: 3.0
my experience in this after cooking some roms, that wifi proplems are from the file wavedev.dll try to resore the old one using resco explorer 6.10
or try to enable wifi from flight mode after softrest; i.e. close phone and bluetooth and infrared
it nothing to do with IPL or SPL, but it will be usefull to update them, but please don't do it unless you know what G device you have, G3 or G4
Related
for unlocking and upgrading I have done few things and made mistake
please see as under
first original :
++++++++++++
rom 3.14.03
date 9.27.02
radio 6.12
protocol 324e4
model pw10b1
++++++++++++
now after upgrading :
++++++++++++
rom 3.14.17
date 10.11.02
radio 6.12
protocol 324e4
model pw10a1
++++++++++++
what i have done :
1. cooked rom from http:**lumpistefan.dyndns.or* PPC 2002 - 3.14.17 ENG O2-Asia with XDAunlock selection
my problems and error now :
1. rom upgraded but device not unlocked.
2. I am not able to connect with all activesync versions, status icon shows connected with green highlight but I can not explore device from there.
3. my device model is converted from pw10b1 to pw10a1
4. my rom converted from 3.14.03 to 3.14.17
I am looking for :
My activesync not working and
I want to unlock device and want to upgrade device with wm2003.
Re: pw10b1 rom 3.14.03 unlocking and upgrading & no acti
xdaI99 said:
1. rom upgraded but device not unlocked.
2. I am not able to connect with all activesync versions, status icon shows connected with green highlight but I can not explore device from there.
3. my device model is converted from pw10b1 to pw10a1
4. my rom converted from 3.14.03 to 3.14.17
I am looking for :
My activesync not working and
I want to unlock device and want to upgrade device with wm2003.
Click to expand...
Click to collapse
1. For unlocking i would suggest downloading and installing this ROM:
ftp://xda:[email protected]/Wallaby/ROM/Special/special_rom_1.2.exe.zip
2. I think the activeSync-problem is temporarley. Which version are you using?
3. Device model is hardcoded in the ROM and those are just names.....
4. After installing a new ROM it´s normal that you have an other ROM Version on your device
5. Afetr unlocking with the Special Edition ROM you could install easily the WM2003 ROM....
Stefan
currently I have installed activesync 4.71.1015.0
I have upgraded rom from activesync version 4.1.4841.0
while exploring device, getting error
"critical communication services have failed to start. Try resetting the mobile deice and then connect again."
thanks for the quick response
just reinstalled 4.1 and activesync is now working
going for rom upgrade .. will tell u once get success
gr8 man .... its done .. its unlocked :lol:
rom 3.17.03
radio 6.12
phone not working no signal error :!: :!: :!:
hey ... its done
through radio update from given link
http://forum.xda-developers.com/viewtopic.php?t=23980&highlight=upgrade+radio+stack
IPL
2.16
SPL
2.16
Radio / GSM
02.07.10
ROM
2.16.9.1 WWE
Protocol
413.1.03
ExtROM
2.16.9.101
When I receive incoming calls as soon I press accept button it missed it and same happening with outgoing calls when i dial it hangup instantly.
It happenes randomly.
Do I need to install any fix or update something.
I tried
IPL
3.08
SPL
3.08
Radio / GSM
2.71
but no luck
Please recomend me the stable radio who solved my problem.
Look at my post. But I had any problems this radio. I am trying to improve the GSM module.
http://forum.xda-developers.com/showthread.php?p=2120768#post2120768
Hi,
I am also using a wizard, K-Jam, and I need some help from you guys.
Several month ago, when I tried to flash its rom, without much knowledge on flashing roms, I accidentally used MTTY to DOCTEST the rom, which according to the threads I was following, was to "format" the rom. Then I flashed it with Custom RUU 1.01.
The phone works well after that except the IPL becomes forever 1.01, no matter what kind of rom flashed. The SPL can be upgraded or downgraded without problem.
So, now the phone is
=> Bootloaders:
IPL: 1.01 (G3 device)
SPL: 3.08 (G3 device)
Built on Nov 13 2006 at 14:02:18
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.2.xxx (Build 19839.kosky\xc8~\xd3~Hr.)
ROM: 5.2
Registry AKU: .kosky\xc8~\xd3~Hr.
Radio: 02.69.11
Protocol: 4.1.13.30
It seems the IPL is locked at 1.01. Can anyone help to solve this?
Another issue is the Wifi. When I flash it back to Custom wm 5.0 rom1.01 (IPL/SPL1.01), the Wifi works fine. Everything(WLan mode, MAC, etc.) is pre-set. But when I flash it to other roms, I can't turn on the Wifi, either through Commanager, or Settings>Connection. When I tap the WLan button, the process indicator goes on for a while and then off, the Wlan is still off. Impossible to input the WLan settings.
I wonder if the Wifi problem is caused by the IPL locking.
I do need help and advice from you guys, thank you very much!
i have htc 8125 wm 5.1
i was upgrading it to wm 6.every thing was fine.but then i try to upgrade it to 6.1
and active sync disconected at 60%
now when i turn on the phone i get cingular screen and
IPl 2.25.0001
SPL 2.25.0001
GSM 02.25.11
and no OS version is loading.please help my to fix it
someoneee said:
i have htc 8125 wm 5.1
i was upgrading it to wm 6.every thing was fine.but then i try to upgrade it to 6.1
and active sync disconected at 60%
now when i turn on the phone i get cingular screen and
IPl 2.25.0001
SPL 2.25.0001
GSM 02.25.11
and no OS version is loading.please help my to fix it
Click to expand...
Click to collapse
Your problem is NOT fatal. If you were able to start the flashing, you have enough to search and read through the forums on flashing. I have had the "RGB" screen problem happen to me. I read through the forums carefully and found the answers. Give it a shot.
Plug your phone in and flash "This ROM"
thanx for the link.But i can't install any os because i can't connect to activesync.I tried in boatloader but still can't connect.Can you help my?
ow right.i did it.I search this forum and found some usb sync drivers.then connected the phone and setup works.thanx for your help!
Hello all!
I need urgent help with my T-Mobile MDA Vario I (Wizard 200) G4 (2006):
I wanted to upgrade to WM6 and used Hard SPL to do that. Read all the tutorials.
After applying Hard SPL the boot screen read:
IPL: 2.21.0001
SPL: 2.21.Olip
GSM: 02.19.11
OS: 2.24.2.5
Then I flashed the ROM with "RUU_WM6_XB_FUSION" .....
Result: At reboot it hang in the old T-Mobile boot screen stating:
the above IPL and SPL but
GSM: 02.47.21
OS: 10.0.0.0
The only thing I can do now is:
go into boot loader mode by pressing camera and stylus
and reflash it with the same RUU: it still hangs....
Not possible to reconnect to Active Sync anymore so cannot remove Hard SPL to go back to original OS with Soft SPL....
SO WHAT NOW???? Please Help, I am at a loss, just bought it...
you need to install a non official windows mobile 5 rom that doesnt have spl / ipl built into them (ex: wizard love rom) google it.
Brought back to life!
Many thanks: I did what you suggested and it's back amongst the living!
Now I need a stable G4 proof WM6 RUU....any suggestions???
fhjmgb72