I got Italian File.but I don;t know how to install it..
The file name is arteimg.nbh.
Please help me.
i think you need USPL and extract the files to your hd, then
copy this nbh file into the uspl folder and start uspl...
I think this is an image to flash from sdcard (because of the name),
but imho it should work when you use uspl.
Cheers Peter
nbh file is installed with original/standard flashing utility for your device.
if you have nbh which represents original ROM for your device, then you can copy it to sd card with name ARTEIMG.NBH, reset the device into bootloader, it will flash.
however flashing from sd card only works with original/shipped ROM for your device.
regards,
Related
I tried to upgrad my qtek using the XDA_Tools directly with USB and it failed, what I can see in the screen is only grey lines.
Now, I'm trying the other wy using the SD card. I followed all the steps mentioned in the forum and I used the XDA_Tools to make a ROM image on the SD card.
When i go to the boot loader while the SD card inserted it doesnt prompt me that there is a new ROM image on the SD card.
I tried to use variouse versions of the ROMS's and it still gives the same result.
I have bootloader ver 5.15
SD card 64 MB
SD read/write USB
Can any one please help me to perform this task to have my qtek back.
Thank You
you used nbf or nb1 format ?
did you cook it like that or extracted the nbf from the ROM exe ?
Hello Biso,
I tried first cooked one from yorch nb1, then I tried NBF I already downloaded , both couldnt work.
I doubt that there is a problem in reading from SD card, as I now I try to perfrom back to SD card it tells me " CARD FAILED"
Thank you,
Hey Biso,
Just curious by what you meant 'extract the nbf file from ROM .EXE file'? Is this the proper way to do it?
I cooked various versions of nb1's and nbf's but they won't copy on the SD card. Whenever I try to copy an nb* file on the SD through a USB card writer using the XDA tools, I get a message reading that there is something wrong on the filesize and it cannot proceed with copying the file.
Hey Peter, did you get the nbf file on the SD successfully? Do you need something more than just XDA tools?
My bootloader is also 5.15.
mirage said:
Hey Biso,
Just curious by what you meant 'extract the nbf file from ROM .EXE file'? Is this the proper way to do it?
I cooked various versions of nb1's and nbf's but they won't copy on the SD card. Whenever I try to copy an nb* file on the SD through a USB card writer using the XDA tools, I get a message reading that there is something wrong on the filesize and it cannot proceed with copying the file.
Hey Peter, did you get the nbf file on the SD successfully? Do you need something more than just XDA tools?
My bootloader is also 5.15.
Click to expand...
Click to collapse
Yes I could get the file on the SD, you dont need anything more than the SD tools, but my only problem is that when I insert the card and go to the bootloader nothing happens[/quote]
Ok Peter,
It seems that I'm running through the same problem myself. The copying process through the XDA tools seems to be going smoothly but after it is completed I can't see the file on the SD card. Have you checked that the file has been really copied on the SD? I'm working on it now. Let me know if you find something first.
Hello All,
Yes, I always cook the ROM as EXE and if it doesn't work I extract the nbf file from it.
The best way is to format the SD card using the XDA. Then use XDAtools to copy the nbf to the XD card through the USB cradle. When it's done, the SD card should NOT be readable. The XDA might ask you to format this card ... just press NO!. When you go to the bootloader it will be recognized.
I just flashed my XDA with A30.09 few minutes ago ... I used exactly those steps .... Good luck
Thank you Bisso.
I managed to pull it through myself in a slightly different way. I had to copy the nbf file in the program files/XDA tools/binary/english folder. I then run the XDA tools and indicated the source and destination folder manually the source being the nbf file in the above folder.
It worked!!!
For all those of you cooking your ROM from Lumpi Stefan's kitchen beware of the 4.01.00 ROM. It's a T-Mobile's ROM and if you're not happy with it, it won't let you change it through active sync. You'll have to use an SD card to download a new ROM on your Qtek.
Hello Biso,
I am not able to perform ur way of upgrading because my qtek doesnt boot it gives those grey black and white lines, so my only wy is to go through the boot loader, could the version of the rom be the reason that i doesnt want to boot in the boot loader?
Hey Peter,
I had the same problem and I figured out why. Make sure that the command lines on the source field of the OSimage tool window point to the right nbf file which you had extracted from the .EXE file. Click on the 'browse' button next to the 'source' field and pick it up manually. Then proceed with the copy and slide your SD in your Qtek.
Let me know of how you did...
I forgot to mention i do have hard spl 1.40 ollipro
do i need to upgrade to the 2.10xx ollipro?
also looking at the unbrick from the wiki i need to
"flash only nbh containing os"
now i'm not sure where i can get this "nbh" file containing os and how i can flash it without being able to sync via usb cable since it doesn't get passed att logo splash screen...
BUT
I can go to the tricolor bootloader...
so if anyone can direct me on how i can get the "nbh" file containing os only
(not the nbh file containging radio only)
and how i can do so via the tricolor bootloader, i will give you a pat on the back! i have warm hands so you'll get healing from it also..
practically every single cooked rom is an nbh file with the os only. and you can flash from the bootloader.
dude, use the sd card method. 1st format card fat32, copy .nbh file to root of sd card. rename to hermimg.nbh. put in phone then go to bootloader. follow prompts. cheers...
is it possible to do that?
I brick my Heral when I trying to patch IPL, now it stack in boot mode.
I try al avaliable on xda ftp rom updates but always I got "Incorrect file" .
My Herald is from Rusia (cyrylica on keyboard)
it is indeed possible to do so. i am not sure of any IPL/SPL requirements, but here are the instructions.
1. take your sd card
2. take the .nbh file of the rom and rename it to "heraimg.nbh"
3. put it on your sd card
4. put it in your phone
5. go into bootloader. if already in bootloader, soft reset.
6. follow the onscreen instructions
thats how i flashed ttran's first '209 rom
fzzyrn said:
it is indeed possible to do so. i am not sure of any IPL/SPL requirements, but here are the instructions.
1. take your sd card
2. take the .nbh file of the rom and rename it to "heraimg.nbh"
3. put it on your sd card
4. put it in your phone
5. go into bootloader. if already in bootloader, soft reset.
6. follow the onscreen instructions
thats how i flashed ttran's first '209 rom
Click to expand...
Click to collapse
it shows only checking sd content ant after that it is stacking on bootloader informations (IPL, SPL versions)
what kind of card is it? I do not believe this is possible with microSDHC cards as well as cards of a certain (relatively high) capacity.
Make sure your card is empty except for the file and that is formatted to FAT16 ( I think)
indeed your card must be formated by Fat 32 (use your Windows Explorer to format the card)
Besides this issue, I'm not sure if it is possible to do so if your devide got stuck changing its IPL. Which one did you try?
To make sure; use the official RUU rom from HTC.
Download it; open the exe file with WinRar to extract the nbh file included and use this file to flash your device.
Good luck
dont waste your time, those methods doesnt work. If u r goin to try to... "recover" your device with this method... you're just wasting ur time (you'll end up with a Invalid Certificate error)
theres no solution
jappo01 said:
indeed your card must be formated by Fat 32 (use your Windows Explorer to format the card)
Besides this issue, I'm not sure if it is possible to do so if your devide got stuck changing its IPL. Which one did you try?
To make sure; use the official RUU rom from HTC.
Download it; open the exe file with WinRar to extract the nbh file included and use this file to flash your device.
Good luck
Click to expand...
Click to collapse
thank U for your's all help but I couldn't flash it. I try all avaliable rom updates from xda ftp extracted to micro sd card formatted to fat 32 under windows explorer but without positive results, mean couldn;t start flash process (probably cid lock blocked it)
ochman said:
thank U for your's all help but I couldn't flash it. I try all avaliable rom updates from xda ftp extracted to micro sd card formatted to fat 32 under windows explorer but without positive results, mean couldn;t start flash process (probably cid lock blocked it)
Click to expand...
Click to collapse
It could be beacuse the ROM that you are trying to flash requires Hard-SPL.
jappo01 said:
indeed your card must be formated by Fat 32 (use your Windows Explorer to format the card)
Besides this issue, I'm not sure if it is possible to do so if your devide got stuck changing its IPL. Which one did you try?
To make sure; use the official RUU rom from HTC.
Download it; open the exe file with WinRar to extract the nbh file included and use this file to flash your device.
Good luck
Click to expand...
Click to collapse
thanks work fine ( heradiag.nbh)
dose any one have the organal rom flash for i mate jasjam.
or where can i fine the site for it.
Orijinal JASJAM Rom
Look the www.imate.com for the original JASJAM ROM , but is a WM5 rom
it fine.
thanx
plaese could some one help with the. flash you put on the SD card to hard flash. as im unable to flash from the the normal program form the i mate site.
thanx
To use sd card method you need to have Hard SPL installed.
1. Format sd card FAT32. Copy .nbh file of the om you want on to it. Rename to hermimg.nbh
2 Insert into Hermes and go to bootloader.
3. If the ALL steps have been followed exactly then follow the prompts.
Cheers...
ultramag69 said:
To use sd card method you need to have Hard SPL installed.
1. Format sd card FAT32. Copy .nbh file of the om you want on to it. Rename to hermimg.nbh
2 Insert into Hermes and go to bootloader.
3. If the ALL steps have been followed exactly then follow the prompts.
Cheers...
Click to expand...
Click to collapse
i know how to do that. in looking for the organal rom the .nbh to put on to my sd card.
If you have the original rom, and its an exe file, right click on it and select "extract here". It should give you all the files in the .exe file including the .nbh file.
If you haven't got the file and are loking for it, good luck.... Might be in the wiki but might not. You might be lucky and have someone here who has it but its not gonna be emailed to you. At 60 to 90 Mb its not gonna go through.
Cheers...
thanx ultramag69. you are great help i have come right.
Friends,
After flashing my HSPL and my ROMS so many times, I have suddenly gone blank.
If I need to flash my phone back to it's original state, and if I do not have my original ROM, what do I do?
Currently it's booting up with a picture of an Android and a Bird ( I forgot what I flashed to get that! )
I purchased this phone in Singapore.
Any assistance will be much appreciated!
Ben
Taken from: http://forum.xda-developers.com/showthread.php?t=609477
To Remove HardSPL from your Device or Flash back a Stock Rom and Stock SPL for Warranty Purposes
You can remove the HSPL by flashing an original SPL from microSD card OR by running the HSPL3 application (You need select 2.08.0000 in the choose screen).
* You can also use the microSD Card method to flash back your Stock Rom and Stock SPL that you originally had on your phone*
- Download a shipped Rom from *HERE*
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
Thanks for the insight. Really forgot even what the process was called and couldn't do a read up I normally would. Appreciate your help Polo!
polo735 said:
Taken from: http://forum.xda-developers.com/showthread.php?t=609477
To Remove HardSPL from your Device or Flash back a Stock Rom and Stock SPL for Warranty Purposes
You can remove the HSPL by flashing an original SPL from microSD card OR by running the HSPL3 application (You need select 2.08.0000 in the choose screen).
* You can also use the microSD Card method to flash back your Stock Rom and Stock SPL that you originally had on your phone*
- Download a shipped Rom from *HERE*
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
Click to expand...
Click to collapse