Database Users

USB connectivity issues

No computer detects my TyTN anymore. Not even to display the "New Hardware Found" message that I usually get when plugging the TyTN into a USB port of a computer that hasn't seen the device before. Nothing. The phone still charges and the it still knows when its plugged by the icon on the lower right corner of the screen.
I've searched the forum for this very issue, and found mostly activesync issues/solutions. I've tried them all with no success. BTW activesync works for me via bluetooth. My last resort was a hard reset. Three times... (read from one of the posts). Now I'm stuck with a TyTN with a Dopod ROM.
Has anyone experienced this problem?
I tell you, having a kick-ass phone but without a way to push the customization files into it is TORTURE.
Please help.

I had a smiliar problem when I Installed XP-MCE.
I solved it by downloading the latest Active Sync and Installing it, From there windows picked it up as a Mobile Device.

jford04 said:
I had a smiliar problem when I Installed XP-MCE.
I solved it by downloading the latest Active Sync and Installing it, From there windows picked it up as a Mobile Device.
Click to expand...
Click to collapse
Thanks for the reply. I use ActiveSync 4.5 on Win2K, XP and XPMCE. The computers are not able to detect it at all.

Reinstall Activesync
Try reinstalling Activesync (which will uninstall the earlier install of the same or earlier version). This worked for me. I face this problem once too often coz I sync with my desktop and laptop.

try deleting the partnership on the phone and then try plugging it in, make sure all the partnerships on the phone are deleted, i had the same issue with my tytn and that solved it.
Another issue i had was that windows was detecting the device but still would not allow it to connect , so what i did there was just go into computer management (right click on my computer then click manage) and uninstall the device while it was connected then unplug and plug it back in and windows re-detected it. Also make sure you have the atest version of active sync installed.
Hope this helps

Check device manager - does it even refresh when you plug your device in?
If it does not, you may have a big problem...
Have you tried an alternate USB cable? It could be that that is shot.
Have you still got the min-USB headphones? If so, do they still work?
If they do not work either, that would suggest that the device's USB port port is shoddy...

And reality sinks in...
yrreP said:
Check device manager - does it even refresh when you plug your device in?
If it does not, you may have a big problem...
Have you tried an alternate USB cable? It could be that that is shot.
Have you still got the min-USB headphones? If so, do they still work?
If they do not work either, that would suggest that the device's USB port port is shoddy...
Click to expand...
Click to collapse
Yeah, I think the USB port on my TyTN is partially dead. This feels like being with Verizon and their locked phones. Sucks wet cow butt.
Oh well, I'll just learn to live with my Dopodish phone until HTC comes out with TyTN III.
Thank you all who replied.

Activesync Help!!! Can't figure this out

Alright so I've done quite a bit of searching but I can't figure this out and its really frustrating me. I have mfrazz's Windows Mobile 6 release 3 installed.
Rom version: 10.1.0.811 WWE
Rom Date: 8/11/06
Radio Version: 02.25.11
Protocol Version 4.1.13.12
My problem is that activesync will not recognize my MDA no matter what I do. I've hard reset my phone, installed and uninstalled activesync 4.5 a bunch of times. Done this on two different computers, but when I plug the mda in, nothing happens at all. I plug my roomate's MDA in (running a different rom) and it instantly recognizes the phone and begins to sync. I really want to try different roms out, but without an activesync connection I can't. Any ideas guys?
Thanks...
ps. Let me know if this should be in the WM6 forum, I wasn't sure.

Well,this problem has been discussed hundreds of time in the forum,just read through the forum,I'm sure you'll find answer to your problem easily,there was no need to start a new thread,or just hit the 'Search' tab at the top of this very page and enter 'Activesync Problems'.
Cheers!

Thanks for the feedback-
It seems like I've read every single thread related to this problem, but in almost all of those their phone is at least recognized by activesync. With mine, even after disabling all firewalls and doing all the suggestions in the other threads, I just can't get activesync to even recognize my phone

If you still can't sync at someone else's computer, you probably have a bad USB cable, or worse, a bad connector. Try a different cable (any USB to micro should work, they aren't specially wired or anything). If that's no help, try blowing out the connector jack on the phone (use a magnifying glass or ? to look for debris, too). If that's no help, you may be screwed. You can try these guys, but it'll be expensive (like, replace my phone expensive): http://www.drcellphone.com/index.php
Are you at least getting a charge light (solid amber) when you plug in?

Yea, it charges just fine and I get the solid amber light and everything. I use the same cable to sync my roomates' mda, so that isn't the issue. I'm really stumped. Im almost positive its something with the specific rom I have on my phone..
I've been forcing it into bootloader mode to try to flash any other rom onto it (I figure if i can just get ANY rom on it... official tmobile, or a cooked rom, etc. then the sync problem should go away) but I'm having troubles there too.

You're not trying to do this with a Vista computer, are you? There are known problems syncing with Vista-based PCs.
If you use Mozilla Thunderbird at all, you can try using FinchSync, just to see if the hardware is functioning properly. This is theoretical, though. I haven't tried this myself, so I can't offer much on FinchSync.

Nope, I first tried it with 3 different XP computers and then for the hell of it tried it with Vista. No go with either one. I've pretty much convinced myself that it is the rom I have on my phone (mfrazz's Windows Mobile 6 release 4) because I never used to have any problems whatsoever

mmj12345
OK, let's take stock of things. I'm assuming that you are using XP.
Check in activesync :
File -> Connection Settings
Make sure "Allow USB connections" is checked.
'Uncheck' the 'advanced network functionality' in the phone.
Start -> Settings -> Connections tab -> USB to PC
If that still doesn't work, I'd try the uninstall, reboot, reinstall activesync and see if that helps any.
I'd also be suspecting the usb cable/ mini usb port of the phone. Recharging a device and getting a data connection are two different things. I have a k-jam that would charge via the USB cable, but would not sync, XP kept complaining about an unknown device. Turned out it was a broken connector in the mini usb port of the phone.It maybe that usb cable connector is not making proper connection with the connector of mini usb port of the phone,try to 'wriggle' the usb cable plug a little and check if it tries to make a connection, while connecting to the phone,sometimes it helps.
Cheers!

I've made sure everything you suggested is correct. I didn't know that charging and data connection are two different things. I figure that if it charges, it should sync. The USB port on my MDA is really loose, and I can only get a charge when I plug in the charger and "push" the plug to the right an hold it there (usually by twisting the cord around the phone in a way that keeps the pressure on the USB socket). So now that you mention that, I'm just guessing that it charges but its so loose that I probably won't ever get it to sync again.
Hmm..
Is there any way at all to flash without an activesync connection? I tried flashing a bunch of roms by forcing the phone into bootloader and then running the RUU, but it always fails because it says I don't have an activesync connection...

Nopes !
You got to have connection with phone through usb cable.Get the mini usb port of the phone repaired or replaced,only then it can establish connection and flash a rom.
Cheers!

Alright, thanks a lot for all of your help! Looks like maybe I'll take the phone apart and see if I can actually see any disconnection on the main board, etc. Not sure if I'll try to make a repair attempt myself because I've read that the solder contact points are pretty small

Big Problems :((

I have the following problem with my HTC Touch HD. Since yesterday after i transfered 2 video files and a few pictures, when i connect it through USB, the computer doesn''t detect HTC anymore (nor syncing nor file transfer). Even the Bluetooth syncing does not work. I performed several soft and hard resets, and it seems it;s getting worse after every reset.
I bought the phone 2 weeks ago, after i sold my Apple iPhone 3G 8GB. As we speak, i kind of regret i did that...any advise for me ?
I forgot to mention: when i plug the uSB cable, the device goes recharging.

Have you tried booting your pc ?
Also try unchecking Settings/connections/Usb to Pc/ "enable faster data synchronization"
r
Andrew

What cable do you use? I had similar problems with non original (asus) usb cable.

greetings everybody..
1) i tried what you said several times, no result.
2) i get same results with the original and the other cables..
3) i noticed one thing . . . if i connect the device to a computer that i never conected before the device, it launches active sync....and Active Sync just wont interact with my device.

Did you try reinstalling ActiveSync on your PC?

yes i tried....same result. Do you think a change of ROM would solve that ?
Now, even a syncronisation using bluetooth is almost impossible, since i cant pair the computer and the device. Damn, it's like a virus or something.
stupid thought:
Do you think a change of ROM would solve that ?
Click to expand...
Click to collapse
Impossible since i cannot connect using USB. Sorry !

I too had problems with my PC not recognizing the HD. Found out that it was a problem with my firewall and anti-virus. I adjusted anti-virus settings to allow active sync to pass through and have had no problems after that.
HTC also recommends going to Start --> Settings --> Connection tab --> USB to PC and deselect the checkbox for "Enable faster data sync"
For device recharging when plugged in to USB : go to Start --> Settings --> System tab --> Power. here below the battery charge indicator, there is a checkbox. Read the message and check/uncheck as desired.
Hope this helps !!

i thought one potential source for my problem would be the antivirus, but i disabled firewall (eset at work and symantec end point protection at home) and no result what so ever.
I cand figure a way to sync the device even with the bluetooth since i cannot pair the device and the computer.
I am starting to regret i bought HTC...

Try click the Activesync icon on HD Program, there is a "Option" on the menu, click and see if you could delete all the old connect. If yes, re-establish the connection again to see.....good luck

Option menu item is disabled (i performed several hard resets)...(
Another thing i noticed. I unchecked the box (when connected to USB charge), so now when i plug the usb cable, it wont charge. But, if the device is in stand by (black screen), and i plug the usb cable, it wakes the device up. So, in my mind, i think it is something wrong with the OS, it still "feels" the USB cable, but cannot (for an unknown reason) take the necesary action.
For 4 hrs i try to sync the device with the computer using bluetooth, and i cannot manage to do so.
Is there any way to reinstall ActiveSync on my HTC device ?

daemonus said:
Option menu item is disabled. For 4 hrs i try to sync the device with the computer using bluetooth, and i cannot manage to do so. Is there any way to reinstall ActiveSync on my HTC device ?
Click to expand...
Click to collapse
My sync problem with HD and my PC with Vista, was solved as follows:
- Uninstall Windows Mobile Device Center
- Reboot and reinstall WMDC
Ton V

NLBeev said:
My sync problem with HD and my PC with Vista, was solved as follows:
- Uninstall Windows Mobile Device Center
- Reboot and reinstall WMDC
Ton V
Click to expand...
Click to collapse
Tonight i will try to install at home Windows VIsta (at work and at home right now i have XP). I cannot use my phone - no phone number in agenda and it's driving me mad. The phone rings and there are quite a few persons i dont want to talk with.. HEEEEEELP

nobody there to help me ?

If you did a hard reset, and you can connect in drive mode, but can not sync, then I am 99.9% sure that there is nothing wrong with your phone, but that your computer is messed up.
Uninstall all your antiviruses, firewalls, and other bloatware, and see if it works then.

Just a possible solution, but did you try plugging in your phone into other USB slots on your PC? Are you perhaps trying to sync it through an USB extension cord, or maybe USB hub? I had problems with my PC recognizing the THD if I tried syncing that way. Best results were plugging it directly into the back side of the casing.
The reason I'm asking this is that if you have too many USB devices plugged in, it's possible that the USB voltage drops too low and devices won't connect to the computer.

I tried on 5 different computers, all available USB ports.
On a new computer, sometimes on the device screen it shows up Active Sync but that is all, no sync occurs. If i try again on that computer, i get the same result as i get using the computer at home or work.
The device cannot conect as a Disk Drive
Is there a way to reinstall Active Sync on HTC ? My guess is that this software is all gone with the wind (even i performed a hard reset). The big question is what the hell happened ? Could be a ROM fault ? I mention i never tried to change ROM, the only software i installed was S2U2 and Core Player.

If by monday it wont work, then i'll send it into service (i have warranty). But i hate service

all out of ideas...

Any ideas ?

Which items are checked when you go to Settings/connections/Usb to Pc/ on youre phone?
Have you tried to use another memory card (because youre problems started with copying)?

Need help...

i have a t-mobile mda wizard and every time i plug it in to my pc it says device not recognized but it charges and everything... i just bout a new cradle and everything but no dice on it connecting and im running windows xp... help will be appreciated

Right click the activesync button in your toolbar and open connection setting. Click connect device. It will try to connect. If it won't, the best thing is to go thru the help thing. Do you have a custom rom?

active sync do not work
Hi there, i heard some days ago (a friend who ask me for help, unloking wizard to change ROM) and his WIZARD was not able to get recognized by PC it was a bad contact between USB conectors and cable, so he sent phone to repairs and then he was able to sync and then to migrate from WM5 to WM6.1
perhaps is a connectors trouble.....

What version of Activesync are you using? If it's 4.5, you should be good to go. I have seen problems with older versions.
Also, check Activesync on your phone. Make sure you don't already have two accounts created, because that's the limit on your phone.
If not, try different USB Cables and different USB ports (or test those things on a different device with microUSB connection) before assuming the connector on the phone is bad.

as far as i know the phone is completely factory no upgrades or anything i tried to do the connect thing thru active sync where it looks for my phone still no connection and i bought a new cradle and usb cords all together and it still doesn't work...

Cant connect hd2 to computer!!

this is my problem,
when i connect my hd2 it charges but the computer doesn't recognize it. on the phone settings it is set to active sync. i also have 2 computers; xp and vista, both do the same thing.
i could careless about active sync, i just want to plug my phone into my pc and transfer files in and out. ive also tried the disk drive option but still no go?
if i enter bootloader and plug it in it recognizes the usb setting but when the phone is normal, it doesn't??
it did this with the stock rom and its also doing this with nrg titanium rom.
any help would be appreciated

Same thing here.
It charges through USB but it doesnt connect.
If i choose the storage option it works fine.
I want to sync my outlook and i cant...
What the heck...?

i know this may seem a bit "it helpdesk-ish" but try re-booting your PC

Come on... give something drastic!
Already done that, rebooted the pc and the hd2...
still nothing

djchubbs said:
i know this may seem a bit "it helpdesk-ish" but try re-booting your PC
Click to expand...
Click to collapse
believe it or not i have done that mannyy times and did alot of device manager things to try and let both computers recognize the hd2 but still nothing haha..
ive had previous hd2's and they've all connected fine untill this one, maybe its this specific one thats giving me trouble. but regardless, it charges via usb then it should be able to recognize it

Check the active sync settings to ensure that usb connections are enabled. You can tell be looking at the system tray icon - there's a read circle with a white X in it if USB is disabled.
Saying that though, if it doesn't even recognise it when the device is in USB mode, I'd try a different cable. It's perfectly reasonable that the cable could power the device but not fully facilitate a USB connection.

johncmolyneux said:
Check the active sync settings to ensure that usb connections are enabled. You can tell be looking at the system tray icon - there's a read circle with a white X in it if USB is disabled.
Saying that though, if it doesn't even recognise it when the device is in USB mode, I'd try a different cable. It's perfectly reasonable that the cable could power the device but not fully facilitate a USB connection.
Click to expand...
Click to collapse
but the thing is when i go into bootloader it recognizes it as usb and i can add customs roms and such. just not when the phone is normal weird ?

k20a1 said:
but the thing is when i go into bootloader it recognizes it as usb and i can add customs roms and such. just not when the phone is normal weird ?
Click to expand...
Click to collapse
That is very weird. Sorry mate - never heard of it doing that for anyone before.

Make sure you have the mobility center/active sync program installed on your computer. Without it it won't work.
On Vista or Seven, with the HD2 plugged in, you can find the program/drivers by launching and refreshing manually Windows Update. On XP you have to do that manually.
Good luck.

This happens to me often. In my case I have found it to be a weird driver issue. Go to device manager and look for the yellow triangle. Right click and update driver software. This worked for me I hope it helps.

bit late but just flashed maxsence and i love the look, but have allready had to restart by phone 10 times in 10 minutes. I'll wait for the next release. back to GTX for now.
Good work NRG. keep it up.

this is one of the many WM6.5 errors!
need Android soon!

Ok here we go.
The phone did not connect through activesync to my pc. When i selected to connect as mass storage it connected.
I checked for driver issues in device manager but nothing came up.
I checked the hd2's activesync. Bingo! the activesync was crashing when i was running it. I had to hard reset the phone.
Now it works fine.
My guess is that maybe a program that i installed recently was buggy and created this particular problem. Unfortunately i have about 50+ programs installed (including themes etc) and i m not sure which one it was.
I was installing all the programs again today one by one and after the install process was completed i connected the hd2 to usb to find which app was the problematic one.
After installing almost(some were found useless) all of the apps (here is the crazy part) the hd2 still was connecting through activesync....
HTC will drive me nuts...
Anyway the phone now connects correctly.
I cant understand which was the problem....

as odd as it may sound i think i figured it out.
i think its the usb cable that im using, i have to wiggle it around for it to connect to active sync but once it connects its not a stable connection as it cuts in and out.
but charging capabilities work though!
pos wire, i ordered a new wire and if that one fails also, i will have to get my hd2 replaced for faulty usb port
thanks for all the replies much appreciated

@k20a1
Try to hard reset the phone.
It worked for me.
If not again, then use your warranty!

angelossssss said:
@k20a1
Try to hard reset the phone.
It worked for me.
If not again, then use your warranty!
Click to expand...
Click to collapse
i did whenever i custom rom'd it, it still does the same thing. yes it will connect via usb while in bootloader but will not during regular phone operations lol

"Disk drive" mode not working with XP laptop
HD2 is working fine with my desktop, but wit laptop I can only use ActiveSync to browse files.
When I connect the USB cable I get:
"Found new hardware wizard"
but it tells me that it Cannot Install This Harware - Disk Drive
"An error occurred during the installation of the devie The system cannot find the file specified"
And I only have "Finish" to click - if I click it the wizard lunces again immediately and goes on and on with no end.
HD"/Leo does not appare in Disk Manager (I know ablut the drive lettering issue)
I'm sure its my XP issue, but I havent found drivers to fix that, and I'm not about to reinstall XP on my lappy in near future.

Transfer files - Solved
;
k20a1 said:
this is my problem,
when i connect my hd2 it charges but the computer doesn't recognize it. on the phone settings it is set to active sync. i also have 2 computers; xp and vista, both do the same thing.
i could careless about active sync, i just want to plug my phone into my pc and transfer files in and out. ive also tried the disk drive option but still no go?
if i enter bootloader and plug it in it recognizes the usb setting but when the phone is normal, it doesn't??
it did this with the stock rom and its also doing this with nrg titanium rom.
any help would be appreciated
Click to expand...
Click to collapse
I share the same here and I was despaired of trying to solve it with any logical, as well with illogical, measures. Such as: rebooting, changing usb cables, reinstalling activesync 4.5, etc.....etc...blla..blla...blla...
However, I solved the "Transfer files issue" by taking out the sd card from the HD2 and connect it with an external cards reader to my pc.
The card reader connected and works with the same usb cable that does not work with the HD2.
That way I load it with all files and in the same occasion I reload into my computer the daily spb backup files.
However, I have the feeling that the reason for that problem is a missing file/driver named: "Setup1.SPL" in the pc windows operating system.
In order to solve that it seems that only reinstalling windows on my pc will be the solution which defiantly do not like.