BBConnect 4.0.0.76 HP 514 smartphone - Sable

Hi all,
I have buyed an HP 514 (wm6 standard) and I tried to install the BBConnect above several times. The setup procedure seems ok but after the first screen for selecting Calendar, Contacts and/or Tasks to synchronize, in the second one I continue to see Connection -> Not configured and I cannot make the wireless synch.
Any ideas?
Thank you in advance.
Alex

Any news?
Has anyone able to give me tips concerning my request? Has anyone know if my smartphone is compatible with bbconnect 4.0.0.76? Or, is there another new version (for smartphone) to install?
Thanks,
Alex

Related

Trinity and Blackberry Connect

Hello,
Can I use the Trinity as a Blackberry like I´m doing it right now with the HTC TyTn? Can i use the same Software (Blackberry Connect) as the TyTn?
Thanks for any help!
Best Regards
Giovanni
I installed the BBConnect client on my Trinity but it doesn't work.
The PIN remains in "pending" state.
I'm on TIM network, the SIM works fine on a blackberry handset.
I installed the BB connect for the tytn on my Trinity everything installed fine but for some reason it connects for 3 sec and then disconnects it also doesn't register on the network even though i was able to generate a pin... the i.p adress is shown for 3 sec and then dissapears. i have been trying to find a solution for the past week but no success... i hope somone has the answer.
Sirs,
any news about trinity and blackberry connect?
anyone is experiencing a success?
please let me know
j
....
Hi all,
I'ma trying the same, installing in may HTCP3600 the service does not start and remains stopped.
Anyone one could get it?
Best Regards
HI i am using bbconnect on my trinity and it works fine first you have to get the program from dopod (will try to have link) ...i remember someone posted it here.... it is different program from the bbconnect for the tytn.
you have to log on to your blackberry account and try changing handhelds if it doesnt work than you have to ask your operator to cancell your previous account (if you have it on the tytn) and then reactivate it again with trinity bieng your first mobile to register. and it should work fine
http://rapidshare.com/files/23772366/BBConnecttrinity.exe.html
Almulatham said:
HI i am using bbconnect on my trinity and it works fine first you have to get the program from dopod (will try to have link) ...i remember someone posted it here.... it is different program from the bbconnect for the tytn.
you have to log on to your blackberry account and try changing handhelds if it doesnt work than you have to ask your operator to cancell your previous account (if you have it on the tytn) and then reactivate it again with trinity bieng your first mobile to register. and it should work fine
http://rapidshare.com/files/23772366/BBConnecttrinity.exe.html
Click to expand...
Click to collapse
Thanks Almulatham!!
We have a BES server in our company, I'll try it tomorrow.
I'll give you news ASAP.
Diego.
dear all,
I was unable to download the file from rapidshare for unknown reason it's continuing say me that I have exceed the download limit, but I have not download anything from that site by months.
Could some one send me the mentioned file in another way?
may you please explain how can I get a bb account? If I remember right during the registration process it ask you insert (bb) IMEI and PIN, what information I have to insert?
thank you very much
j
For rapid share
Click the free button and wait for the specified time. (use refresh button)
or pay the premium price
First you have to get a bb account from your telecom provider. Then install the bbconnect program.
once installed click on the calender sync. Then click the utility icon and press the regestration button.
The regestration button should automatically detect your pin and imei plus your ip adress.( you should recieve conformation of the registration) and you are all set to go.
you can get the pin and imei through a program called bbconnect desktop tool for manual installation.
Thanks Almulatham!!
We have a BES server in our company, I'll try it tomorrow.
I'll give you news ASAP.
Diego.
Click to expand...
Click to collapse
Hi Again,
I've try the soft but although the service is started, is no connected, my main problem is that i'm not able to configure my enterprise mail settings because in tab utility "Email Setup" option is in grey.
I suppose that if I would have BB Desktop manager for pocket PC software it could be easy to set up.
We also have tried to do it in our BES Server but is impossible to assign a PIN CODE to a user or edit the actual PIN CODE.
any ideas???
Thanks in advance....
I need...
Hi,
To finish configuration of my BBConnect Soft in my HTC I need this:
BlackBerry® Connect™ Desktop Tool (For BES users) It colud be downloaded if I had a user/pass but I have not
Someone colud send me?
Thanks A LOT!!!!
Dear Almulatham,
thank you very much for your valuable info.
I've downloaded the software, installed it on trinity, create the blackberry account, and added the e.mail address I need to be syncronised.
It created a sort of folder named systema where I received a message with subject "Registrazione" and containing "Il palmare è stato registrato tramite la rete wireless".
And now??????
my internet connection is on but I'm not receiving any message.
Could you please explain me what I've to do.
thank you very much
j
HI regarding the BES server i am not sure what to do as i am using the individual account... and not sure how it works...but if you had registered a previous avvount you might have to delete it first and reregester again.... i will put the link containing the bbconect desktop utility that will help create the imei and the pin....
http://rapidshare.com/files/23986631/ActiveSync_BBConnect_Desktop_Setup_2.1.1.21.exe.html
To jus_mi i am not sure what the language was but from what i understood is you got a file called system and you got a message saying regestration.
that means you have registered on the network and your phone is ready for use. you have to go to bbconnect --utility --email setup.... that will close your bb connection and open internet explorer on gprs. from there you have to register as a new member , once registered you can add your email adress and start recieving emails instantly.
thank you Almulatham,
I found the problem, but needed for your kindly help for the solution.
In the utility window the field configure email accont is grey and not cliccable.
any suggestion?
thanks a lot
j
jus_mi said:
thank you Almulatham,
I found the problem, but needed for your kindly help for the solution.
In the utility window the field configure email accont is grey and not cliccable.
any suggestion?
thanks a lot
j
Click to expand...
Click to collapse
Hi jus_mi,
I had the same problem, and I hope that tomorrow could be fix with BB Desktop for Windows Mobile.
I'll keep you informed.
Almulatham said:
HI regarding the BES server i am not sure what to do as i am using the individual account... and not sure how it works...but if you had registered a previous avvount you might have to delete it first and reregester again.... i will put the link containing the bbconect desktop utility that will help create the imei and the pin....
http://rapidshare.com/files/23986631/ActiveSync_BBConnect_Desktop_Setup_2.1.1.21.exe.html
To jus_mi i am not sure what the language was but from what i understood is you got a file called system and you got a message saying regestration.
that means you have registered on the network and your phone is ready for use. you have to go to bbconnect --utility --email setup.... that will close your bb connection and open internet explorer on gprs. from there you have to register as a new member , once registered you can add your email adress and start recieving emails instantly.
Click to expand...
Click to collapse
Almulatham thanks again,
I'll test it tomorrow.
Bye.
Hi regarding the grey email setup... you have to first register on the network first (register now icon) you should get a registration confirmation on your message files.
once you have the confirmation you can use the email setup function. Once the email is setup you should get another confirmation for the same.
To make sure you are conected in the STATUS icon on bbconnect you should get network available or connected. And on the IDENTITY icon you should get the pin# + IMEI# + IPadress.
I think it is important that if you had a pervious handheld with bbconnect that you have to delete your previous account and reactivate a new one then you can register... because i personnally couldn't change my bbconect from tytn to trinity until i did the above.
If you get signed up for BB service on cingular, you no longer can use 3g, is that right?
i am not sure how it is on cingular but i am using both 3g and blackberry connect... i think blackberry uses a special gprs connection that is different that the regural gprs and i think it has nothing to do with 3g network.
Almulatham said:
i am not sure how it is on cingular but i am using both 3g and blackberry connect... i think blackberry uses a special gprs connection that is different that the regural gprs and i think it has nothing to do with 3g network.
Click to expand...
Click to collapse
Hi Everyone,
Almulatham, I've have test your procedure in ou BES Server. First I've installed BB Connect for Windows Mobile on my desktop and I have review that my PIN has the same that Desktop Applicaction. Afeter this we have deleted the BES account and create again, but I can`t connect. During 1 or 2 seconds I have IP but it disappears almost inmediatly.
I do not how to test more things.
any ideas?
Thanks in advance!

Blackberry Connect

Hi folks,
I've had problems with the shipped BB version for my Athena. I downloaded and installed the Desktop Component 2.1.1.21 and the BBC version 2.1.2.54. Both are running smoothly and fast.
Donwload from here:
Desktop Component: http://support.vodafone.de/publicfiles/activesyncinstaller2.1.1.21.zip
BB Client: http://support.vodafone.de/publicfiles/bbconnect_pocketpc_bb_2[1].1.2.54.exe
Cheers
Hello.
Thanks for the links.
A quick question: Are you able to be on the web, and still have your mail
pushed in?
Or, must you exit IE or Opera to switch over to mail?
I am so grateful to you if this all works out.
Also, do you know by chance if Cingular has an issue with BB on a Pocket PC?
I can't see why they would, as long as I have the BB data plan... yes?
thanks again.
Hi C0rnholio, I am trying to use my direct push mail functions of my Athena.
However, I am not aware that the Athena comes with a blackberry connect software. Apparently yours come with it, but you have some problems with it, am I correct?
Then you find another software which solved your problems.
Actually which one of those 2 downloads which you posted replace the original problem software? Do you install one in your PC and one in your Athena or both in Athena?
If I can use my Athena for my Blackberry connection, that will help me get rid of my blackberry device coming from my provider.
Please enlighten me on this Blackberry connect for Athena!
BB: anyone using it?
any other experiences? I'm restlessly waiting for my ordered advantage...... will the rom in the advantage be permissable to load BB connect? i went thru this with my wizard..... at the end of it all, when on the web, bb wldn't wrk,until exiting PIE and vice versa....... let's hope this has been upgraded
Blackberry on my HTC Advantage up and running.
Info: WM5 in Spanish
BB in spanish. I installed the BB from the links of Vodafone found in this forum.
My server is Lotus Notes 6.
Any other information just ask me.
BB on WM5 is the best solution for BB. I tried Symbian BB on several machines including Nokia 9300 and the result on WM5 is more stable and you can open ALL attachments. Even better than real RIM BB machines... If you need BB got BB for WM5. Trust me. Off course in this Athena with the huge screen and with the HSDPA is the best solution.
All I need to find out were is the limit of the size of the attachements you can download... if in the BB on Wm5, in the BB Desktop or in the BES itself.
Regards and thank you for the information to install BB on WM5,
mahjong
Just to anyone to know.
BB 4 on the Athena in WM5 destroy the today screen and I should made a hardreset and rollback to BB 2. Looks like a incompatibility between BB 4 and WM5 to me... I'm not sure.
More details in the BB 4 threat in this forum.
Best Regards,
mahjong

IntelliSync scheduler not working

Hi, I installed Intellisync on my new HTC Touch Dual. If I trigger Sync by pushing the button everything works fine.
My surprise the ReadySync scheduler does not work! The PDA does never trigger an unattended sync.
Tried with device on & off, forced connection, etc. with no success.
Also tried to install different versions of the CABs. The two I have are 6.5 and 7.0.5. The same versions work fine on other WM6 devices of my colleagues (TytN, Glofish).
Any idea?
Found the solution
Hi, nobody answered my question but I think I found the solution which I post in case someone else has the same problem ...
The issue is with Connection Documents. The HTC auto-configured GPRS/Edge/UMTS at first setup based on info from my telecom provider (Swisscom).
For some reason intellisync has a problem in reading these connection documents. What I did is creating a new copy manually with the same GPRS settings and set "Auto Pick" option under Connection Manager.
After that Intellisync started to execute scheduled synchronizations! Strangely the manually created connection is not visible in its connection setup list, but who cares - it works.
Do you know where can I get the Intellisync cabs? The one my company provided me with makes my Niki to reboot after each sync. (Pretty annoying..)
Anybody?
Intellisync
We cannot
For these reasons :
1) Intellisync is copyrighted and we do not use warez
2) The client is linked to the server version. You cannot install ver 8 on your pda to synchronize with a version 7 server for exemple
3) Every intellisync server comes with a full set of intellisync client so your company have the right one for you

Outlook Contact's sync. & WiFi

Hello to everybody, newbee here, it's my first WM .
Dear friends I've just received my TC, lovin it, but, there is something which I don't understand:
1) I've 829 contacts in my Outlook 2003, of course, they're managed by categories, why I can't find a solution to syncronize ONLY certain categories? Is it normal that I'm forced to sync the whole lot? Am I doing something wrong or do I've to install any other sw?
2) My WiFi is configured as "internet" and even if I disable "data connection", each time that I ask to download updated weather info, it keeps connecting via GPRS no matter if the WiFi is available and plenty of signal. Anybody here can tell me a step by step procedure to have this working ONLY in WiFi?
Thanks a lot in advance.

Lotus Traveler - Blackberry Connect

Hello,
I just can't find solution.
I need BB Conect (I have BES) or Lotus Traveler.
Is there any working on HD2?
How to make it work?
Thank you
I have lotus traveller installed on my device.
Hello,
I ve lotus traveller install on the hd2 too. No problem with that.
regards,
Hi, thank you for your reply.
It forced me to find out why mine doesn't work.
So I found out that afer every HARDRESET my device autimaticaly create Internet Connection which work for all programs and all websites, but not for Traveler.
So after trying bunch of different ROMs, I finally figure out that I need to create manually NEW internet connection and after that Traveler is working.
Then, next issue I had was:
After installing Traveler, password policy (which locks my device after few minutes) was freezing my device.
So, finally I put original HTC HD2 ROM, Installed Traveler and in options of traveler I set something like: show classing password window.
After that, everything works fine.
So far so good, I'll test it few days to see how it works.
If I'll not be satisfied, I'll turn on my BB and f**k it, I'll use both phone, one for e-mail, second for everything else
At the end, I have multiSIM, so using 2 devices with same phone number will not be problem.
Thank you
The problem you are having with traveller using the original internet connection is it probably has a proxy configured.
If you untick this connection uses a proxy in the settings for the connection traveller will configure first time no problem. I think Traveller uses port 80 which causes the issue.
Yes, you are half right.
Default connection uses proxy, but my traveler uses HTTPS and port 4433

Categories

Resources