Hello,
I just can't find solution.
I need BB Conect (I have BES) or Lotus Traveler.
Is there any working on HD2?
How to make it work?
Thank you
I have lotus traveller installed on my device.
Hello,
I ve lotus traveller install on the hd2 too. No problem with that.
regards,
Hi, thank you for your reply.
It forced me to find out why mine doesn't work.
So I found out that afer every HARDRESET my device autimaticaly create Internet Connection which work for all programs and all websites, but not for Traveler.
So after trying bunch of different ROMs, I finally figure out that I need to create manually NEW internet connection and after that Traveler is working.
Then, next issue I had was:
After installing Traveler, password policy (which locks my device after few minutes) was freezing my device.
So, finally I put original HTC HD2 ROM, Installed Traveler and in options of traveler I set something like: show classing password window.
After that, everything works fine.
So far so good, I'll test it few days to see how it works.
If I'll not be satisfied, I'll turn on my BB and f**k it, I'll use both phone, one for e-mail, second for everything else
At the end, I have multiSIM, so using 2 devices with same phone number will not be problem.
Thank you
The problem you are having with traveller using the original internet connection is it probably has a proxy configured.
If you untick this connection uses a proxy in the settings for the connection traveller will configure first time no problem. I think Traveller uses port 80 which causes the issue.
Yes, you are half right.
Default connection uses proxy, but my traveler uses HTTPS and port 4433
Related
Has anyone ever tried this out?
I am not sure if you need to install the server application on you workstation or on the actual exhange server. Would like to give it a go, as my company I work for is so slow in implementing any kind of mobile mail acess (we will have WM10 with 8mp camera pocket pcs before my work has mobile mail access). :shock:
you could try intellisync Wireless email http://www.intellisync.com/pages/Products/Express/
I have a similar problem with my company being a bit slow on the uptake...this works perectly...really pleased.
You install an application on your desktop and on the device (all very simple) The desktop app syncs your mail etc to a webserver, then the app on the universal connects to the webserver and sync it down onto the device. Very slick. Bear in mind that you have to leave your desktop logged in to your corporate network all the time, which isn't a problem for me as locking the pc doesn't affect the functionality.
I have seen that, but I don't want to use 6 different programs and places to sync. My dad has Intellisync Mobile Suite 6.2 on his Jam and works like a charm, but I can't get my hands on the original installation package.
I can access my work's e-mail via the web through webmail, but I don't know the settings like port numbers etc to get my Jam configured to connect. Is there anyway one can find out these settings without asking IT, as they are still testing it and won't give it to me at this stage.
Surely if you can connect to webmail (exchange), then my Jam should be also be able to connect. Imate Mail also uses webmail and it works on the JAM.
VoodooBOB said:
I have seen that, but I don't want to use 6 different programs and places to sync.
Click to expand...
Click to collapse
Not sure what you mean...there's one app on the pc and one on the ppc.
cdally said:
VoodooBOB said:
I have seen that, but I don't want to use 6 different programs and places to sync.
Click to expand...
Click to collapse
Not sure what you mean...there's one app on the pc and one on the ppc.
Click to expand...
Click to collapse
I was just being sarcastic.
I know on 2 apps, but you still have a "middleman" where you data needs to be sync from the pc, then from there to the ppc, back to the web server and again back to the pc. I want to go straight to the exhange server, which I should be able to do if I can get my work's webmail settings.
I see! Have you looked at xmail from o2...similar but your ppc connects directly to the agenct on the desktop...
it does
it works so far, but it is a pain to configure.
i hooked it up to my mail server.
with the admin tool you need to (under win or x) configure a user, device and principal and there you go.
what the manual does not tell you: you have to replace PipelineManager with PipelineManagerGeneric in ds-server/config/Funambol.xml to get it to work with your IMEI, or configure your device with IMEI syncml ..
It smashes my funny german umlauts, though. There is a patch (already included in Funambol) that should configure my internal storage to use utf-8, still its using internal iso-8859-15 (what ever that is for..)
I didn't get it to Unicode until now..
I have not tried to connect it to my mail server.. and i have not tried push email yet..
Stefan
I managed to get exhange activesync to work. But since last night I can't get internet access via GPRS and this morning I can't get VPN access. No nothing wants to work anymore.
Looks like I have to reload my ppc and start from scratch, I have checked all my settings and see nothing wrong.
So I reloaded my Jam this weekend, connected to the work's mail server via GPRS and got my stuff.
Came to work this morning, changed nothing on the pc's settings, plugged in my Jam via USB, pressed sync and it connect without giving me any funny error messages that I got on Friday.
It is weird that it works now with the same setttings and now juts because I reloaded my Jam, it works. :x
help with funambol
trying to get funambol to work on my xda iis 2003se, anyone else got it working with the push email ive set it up how the guide says but i dont get where the log in info goes for it to get your email. anyone willing to do a step by step walk through.
Enough is enough.
I had the same **** with my old PDA2K and now again with the Exec... I've spent 20 hours thus far on that ****. I just hard reset my machine yesterday and now again this **** happens and I cannot fix it.
I am surfing using UMTS/GPRS.. My definitions are FINE. There's only one connection. It was always fine that way on both the pda2k and the new exec.. but it stopped working now... it could be that some program messed up this ****, but i wouldn't know which.
Trying to browse to a site.. I get PIE saying 'Locating..." then after a minute or so saying "The page cannot be displayed or downloaded blah blah blah"... But the 3GUMTS is connected just fine.. Note that MSN Messenger doesn't work as well (I think that's because it's uses the core engine the PIE uses). Strangely, using networking utilities (vx) I can ping with the machine and even get HTML pages using web addresses. So the problem is not DNS and not a connection problem.. Just probably some damn problem with the operating system not recognizing something.. The 3rd party vxutilities for networking are bypassing that **** hence why they can browse the network just fine.
Tried deleting temp internet files and cookies nada... I also tried soft reset (about 20 times).. nada.... tried deleting the connection and recreating... nada... tried searchiong the registry for my connection name after deleted to see if traces exists.. nada...
Getting tired of this ****.. only hardreset solved it last time and i'm getting sick of becoming the machine's slave rather then the machine being my slave.
Help would be grately apprecaited..... I am sure it's ****ed up registry entry or something like that... I don't have many programs isntalled on my machine as I just hard reseted yesterday and my machine is in rather clean condition except for must have apps.
Help...SOS..
Check your proxy server info (in connections).
My XDA exec just loves to grab my work proxy server and try use that for accessing the web when wifi is active.
Check your proxy server info (in connections).
My XDA exec just loves to grab my work proxy server and try use that for accessing the web when wifi is active.
$20 for a solution
dikkyboy said:
Check your proxy server info (in connections).
My XDA exec just loves to grab my work proxy server and try use that for accessing the web when wifi is active.
Click to expand...
Click to collapse
Thanks for trying to help...
but that's not the issue.. it's wwaayy deeper than that... ( i would have found it after 20 hours of trying had it been this easy ...
No proxy whatsoever. I never used Wifi. No work setup.. only "My ISP Setup".
anybody else? I'm offering $20 by paypal for the kind soul who can help stop my frustration WITHOUT hardresetting my machine or doing drastic moves. I need a permanent solution. If I solve it before so.. I will post my fix here...
UPDATE:
It's working now, though I don't like the solution, I changed in 'Connections' to connect through 'My Work Network' although I don't actually have any work network and I'm using it the same way I used the "My ISP" connection. It may stop working again though. i'll update.. but I still don't get it why the normal My ISP which always worked stopped working.
Are you, maybe, using the SBSH Weather?Are you, maybe, using the SBSH Pocket Weather?
For me the same thing started after I installed SBSH PW…
zormic said:
Are you, maybe, using the SBSH Weather?Are you, maybe, using the SBSH Pocket Weather?
For me the same thing started after I installed SBSH PW…
Click to expand...
Click to collapse
Thanks, but I'm actually using SPB Weather
com'on someone please help me out here. i'll donate another 20 euro to this site if i find a solution... What I did yesterday (changed it so that it will use only the 'My work' profile both both internet and work worked fine.. but only for 24 hours. it now doesn't work again even after multiple softresets as well as deleting and defining the account again.. what a frustartion.
Now only that i cannot use PIE, I cannot use Terminal Server as well.. which is a bummer
Toggle flight mode on and then off.
Have ever try to remove check box of proxy in network tab? With mine it works.
proxy issue
I noticed the same thing on my wizard, I think it may be caused by an internet explorer automatic configuration script. When I manually provide the ip address and port number of the proxy server, the problem does not appear. I changed this in Internet Explorer running on my PC and in the Work connection on my phone. I have also changed the setting in Active Sync to choose the Work Network setting by default instead of automatic.
The only way I got Internet Explorer back to work was after a hard reset.
It did not happen again in the past 1,5 week. I have been restoring the same backup after each of these hardresets so I had an identical install everytime. It seems to be fine now.
I don't know how WM5 handles Active Directory policies (if it handles them at all) that may change your IE settings as well.
BR
Vagedis
SPV M3000
ROM 2.16.91 WWE (2/6/06)
Radio 02.07.10
Ext Rom 2.16.9.101
Re: proxy issue
"Check your proxy server info (in connections).
My XDA exec just loves to grab my work proxy server and try use that for accessing the web when wifi is active."
My wizard does the same, it will work for a week or so and try using some random proxy for no reason!
I just uncheck the proxy tick box and the wifi connection works great with internet explorer. (well usually I tear my hear out for 5 mins and then realise its the proxy!)
R
i had same problem! but opera browser would work fine!
i am also using spb weather but i dont think its that
i tried a few things but iv noticed if u keep the ie cach setings and location as default it may be fine, after not changing the ie cache location iv not had this problem, where asbefre i always used my card for ie cache.
all working fine now inc spb weather
PIE stuck at Locating
Hi mobiler,
I hope you have found a more permanent solution to your problem. I own an MDA Pro with TMobile UK and recently bacame plagued with the same symptoms which you reported, i.e., pocket explorer and opera mobile stuck at locating and not able to browse the web. Through some helpful suggestions on this thread I managed to find a solution which you may or may not have already tried. Like most people, I use my MDA pro at home on my home wireless Wifi network, and while away at work I use its GPRS/UMTS capabilities. I had no reason to think that these two features of the MDA Pro had any interactions with each other. In fact, I seem to remember reading somewhere that separate pieces of internal hardware provide these features. However, to my surprise/dismay I discovered that somehow the Wifi and GPRS/UMTS settings on the MDA pro are linked together. For example, if you setup a proxy server in the GPRS modem settings, which I recently did, without notifying you the Wifi connection also tries to use the same proxy setting. Vice versa if you setup a specific IP address and Gateway in your Wifi settings the GPRS modem connection also tries to use those settings and failing. The solution for getting back to normal internet browsing was to remove the proxy in modem connection by using its automatic settings ,and to tick the server assigned IP address for Wifi. This is a less than satisfactory solution, however, at least things are back to where they were before. I remain very puzzled at the interaction between these features and am dismayed and frustrated that there is nothing in the step by step procedures in each setting that warn you about a possible impact on the other.
Hi, I installed Intellisync on my new HTC Touch Dual. If I trigger Sync by pushing the button everything works fine.
My surprise the ReadySync scheduler does not work! The PDA does never trigger an unattended sync.
Tried with device on & off, forced connection, etc. with no success.
Also tried to install different versions of the CABs. The two I have are 6.5 and 7.0.5. The same versions work fine on other WM6 devices of my colleagues (TytN, Glofish).
Any idea?
Found the solution
Hi, nobody answered my question but I think I found the solution which I post in case someone else has the same problem ...
The issue is with Connection Documents. The HTC auto-configured GPRS/Edge/UMTS at first setup based on info from my telecom provider (Swisscom).
For some reason intellisync has a problem in reading these connection documents. What I did is creating a new copy manually with the same GPRS settings and set "Auto Pick" option under Connection Manager.
After that Intellisync started to execute scheduled synchronizations! Strangely the manually created connection is not visible in its connection setup list, but who cares - it works.
Do you know where can I get the Intellisync cabs? The one my company provided me with makes my Niki to reboot after each sync. (Pretty annoying..)
Anybody?
Intellisync
We cannot
For these reasons :
1) Intellisync is copyrighted and we do not use warez
2) The client is linked to the server version. You cannot install ver 8 on your pda to synchronize with a version 7 server for exemple
3) Every intellisync server comes with a full set of intellisync client so your company have the right one for you
Hi there!
I'm using a xperia X1 with the latest firmware version installed which SE released.
I also use spb mobileshell 3.0 ; active sync via exchange(over SSL, not VPN); palringo; Xperiatweak; TaskFacade; G-Alarm; Skype;WM6 Remote Desktop;.net vnc viewer;
My provider is o2 and I live in germany.
I'd like to use a pptp vpn connection to get connection to several services in my network. I already used it with my xda-mini-s and my orbit2, never had serious problems. Sometimes it took a few soft-resets until i got it working... but now...
I set up my connection as I always did,
@preferences->connections->add vpn-server ;
after adding the server i specified a couple of exeptions for my network-> reboot. -done-
But this time it won't connect automatically, it doesn't react when i type in a ip/name which is defined in the exeptions. (usually it is attempting to connect to my vpn server...)
I can navigate to the preferences->connections-> edit vpn-server and connect manually. It establishes a connection successfully and i can use e.g. rdp.
PLEASE HELP!
I can't figure out why its not connecting automatically.
I entered the exeptions like I always did.
(e.g. 192.168.14.200 or domaincontroller.domain.local -> a wildcard is added automatically to the entrys -> listed like this: 192.168.14.200/*)
I would be very happy if anybody could help!
Best regards, and have a nice day.
Win****
found out something new
Hi there!
Today I found out something new. IT DOES AUTOMATICALLY CONNECT, FOR SOME PROGRAMS...
It's just a question which Software I use.
For example, I always used rdp over vpn.
So I tested if its opening the tunnel if i try to connect to one of my desktops via remotedesktop, and its not.
(on the "old" phone, rdp was included from stock, on xperia i had to install it)
I tested connecting over a java irc app, which is also not working.
If I use e.g. Opera to connect to a website (e.g. owa) over a local ip, its successfully establishing the connection and i could log in.
DAMN!
I need it to work with, rdp, vnc and irc!
Shouldn't the phone recognize that I try to connect to a url/ip wich is located in my LAN whatever wich software is used?
PLEASE HELP
Have a nice sunday.
Win****
Win**** -- Did you ever find a solution/explanation for this?
I used to use a vpn for activesync, and activesync always automatically invoked the vpn connection...so I took that for granted...but today I've been using the WM6 Remote Desktop client, and like you, I can't believe that the recognition of url "exceptions" is useless for this app.
BTW, I would have been happy if I could just create a convenient shortcut to start the connection manually, but I've been all up and down the Web, and apparently there's no way to do that, either. mad, indeed.
i have a similar issue, my phone connets and after 20 secs it drops the VPN
I really searched hard, but couldn't find any solutions, neither in a german forum.
My TD2 can use the wlan for internet via topaz' integrated opera without a problem. But if it comes to adding mail accounts, I am not able to choose wlan as the connection to download / send mails (yes, all access data are correct, it's only that I can't choose wlan as connection). Due to obvious reasons, I don't want to use the regular networks of my phone provider. I just want to use my free wlan at home to send / receive mails. What to do?
Normally when a data connection is request, if pda has the wifi actived it first try to connect with a wlan. if it don't find an active wlan, then it connect by gprs or 3g.
if you want avoid the connection with gprs/3g it is advisable to disactivate it by the program Modaco Nodata.
Got it now, all worked well. But after I entered a complete mail account that worked, I entered a second mail account that I didn't configur till the end. Now it appears in the touchflo 3d, is not deletable and does also NOT appear in the WM Mail structure. It seems it only appears in the TouchFlo, which showed it again after deactivating/ enabling TouchFlo again. SKTools doesn't find it either. Dunno where to fin it apart from the registry, where can I delete it?