SPV M3100 - can I de-orange it? - 8525, TyTN, MDA Vario II, JasJam General

Hi,
I have just baught a HERMES (SPV M3100). Orange has set it up so I cannot use many websites (googlemaps etc). What do I need to de-orange it?
Also - can I get a new active sync? (the one that came with it doesnt sync contacts and doesnt sync with microsoft outlook).
I think maybe I need to Cook or flash my HERMES?
Sorry that these are basic questions. I have read the Wiki, but am no familiar with al the terms.
appreciate any help or just a pointing in the correct direction
Thanks!
Scot

I can suggest you to search the forum
You can use the search function inserting any of the questions you posted above.
I got an SPV M3100 and I flashed it with various roms.
It's a simple process if you follow ALL the rules.
you can start from this page:
http://www.mrvanx.org/hermes_guide/schap
Following this guide you can unlock your device and flash new roms
I can help you if cannot find what you want here in this forum
You're welcome

unlocking
Thanks for that link Elehicmo,
It is very helpful for me a (complete novice).
So to unlock a device I need to Flash HardSPL which is a modified bootloader ? (have I got these terms correct)?
If I stop after the flash Hard SPL stge will I have the same device as before, unlocked?
Few things I wasnt sure about, after reading the site:
"If your SPL version is 2.10.olipro then you ALREADY HAVE HardSPLv7. You do not need to flash it again."
How do I know if my SPL version is 2.10.olipro?
This step is not mandatory but if your radio version is "1.20.31.10" or below
How do i know if my radio version is "1.20.31.10" or below
Can you give me any suggestions as to whether Full, medium or vanilla version of Dutty WM6 v2 would work the best for me - I do not yet have memory storage but I wouldn't want to miss out on key features of WM6
Many Thanks, appreciate any direction with these questions.
Scot

Related

K-Jam English ROM

Goodmorning,
I have one MDA VARIO (UK), where can I find the I-mate K-jam ROM Freeware (English Version)?
And it’s very difficult to install this ROM in my MDA VARIO? (I will must first Back Up my old ROM), how becomes this?
I hope to help me...
Thanks
Hello molf48,
In the ftp there is the rom you want (K-JAM_WWE_1010903_106_10110_ship.exe).
For the other questions, i'm sorry i don't know the answer/s.
I hope some1 guru will help.
you don't need to backup your rom unless you plan to revert back to the original rom in the future. This might or might not be needed in case of a problem with your phone and asking for a repair during the warranty period.
The steps you need to take are:
a. READ THIS FORUM and also the WIZARD UPGRADE forum - take 1 hour of your time and read read read... many people have upgraded.
b. Unlock the Vario and also the CID - using the Lokiwiz utility - read before you unlock - read a lot until you understand what to do.
c. Donwload an I-Mate rom and simply install it by double clicking on it... however like always - READ READ READ
Thank you for your questions and for your time,
Where I can find this ROM? I will go to Google and put the FTP (K-JAM_WWE_1010903_106_10110_ship.exe)?
But can you tell after me with simple steps how flash the new K-JAM ROM in my MDA VARIO?
It’s my first PPC and I don’t know how?
Thanks you
I will answer you even though it is clear that you are not reading the forum.
Once you have unlocked your device using the lokiwiz - upgrading is very simple - you just activesync your device (connect it via usb to your computer - while microsoft active sync software is running - make sure you have the latest one), make sure you have enough battery in your device (it;s best to have 90% or more left) and then simply run the I-Mate upgrade file. And... wait ... and follow the instrucitons on screen.
If my explanation is not clear enough then I suggest you read. It's not fair to help people that just simply won't read. I can assure you that all of what I have said above is written in a much clearer way in the fourms.
Good luck and READ.

Completely Newbie and Beginners Questions (Wizard)

Hi all
I have recently bought a UK MDA Vario, and then I found this site. I have spent the whole weekend reading posts on this website and find it very interesting what we can actually do with our devices. Everyone here seems to have in-depth knowledge of this device and it's programming structure. This is my first HTC device and I have some very basic questions which I'm not sure if anyone here is bothered to answer (or point me a link where I can find the answers).
I can understand SIM-unlock, but...
(1) what is CID unlock (in fact what is "CID" and "SuperCID")?
(2) What is Bootloader?
(3) What is ROM? (is it equivalent to the "Windows OS" we install on PC?)
(4) What is Extended ROM, and what is usually placed in here as opposed to ROM?
(5) Can we just use any ROM on any variation of Wizard, and work?
(6) What is RAPI?
Thanks for your patience, guys.
Tones
Hi guys
So will you help out a beginner pls?
Thanks
Tones
toneslee: may I be so bold as to direct you towards the Hitchkikers Guide to HTC Phones, so to speak, the Wiki, top left of your browser or here: http://wiki.xda-developers.com
It won't answer all of your questions, but it'll help.
We're all newbies from a certain point of view, and a lot of gestalt knowledge goes into the Wiki. Have a look through there, have a hunt around on the board, and any questions or answers that need clarifying, elucidate here. We'll be glad to help as far as we can I'm sure
V
toneslee said:
I can understand SIM-unlock, but...
(1) what is CID unlock (in fact what is "CID" and "SuperCID")?
(2) What is Bootloader?
(3) What is ROM? (is it equivalent to the "Windows OS" we install on PC?)
(4) What is Extended ROM, and what is usually placed in here as opposed to ROM?
(5) Can we just use any ROM on any variation of Wizard, and work?
(6) What is RAPI?
Click to expand...
Click to collapse
Hey dude,
Welcome on the forums.
I will try to answer your questions.
(1) CID = Country ID.
CID unlock will unlock the country ID on your phone so you can install other roms and also other roms with different languages (e.g. if you have a Dutch MDA and want an English rom)
(2) Bootloader for our phone is like the BIOS on a pc
(3) ROM is like an image.
We have 3 different rom types.
* OS Rom - image that includes the Operation System of our phones
* Radio or GSM Rom - rom is for all phones features, GPRS etc
* Extended Rom - this rom includes additional application, customizations etc
(4) Check answer 3
(5) When your phone is CID or SuperCID unlocked you can install any kind of rom of any language or manufacturor
(6) This enables your PC to control the Wizard using USB ActiveSync connection
Maybe there are some others that can correct me or fill me in.
Thanks Panja. This was useful as I am a Newbie too.
Thanks, guys. Appreciate it very much.
Looks like it helped someone else already too... great.
Tones

wiza100

Hi, can anybody help me to find latest ROM for my Wiza100 pocket pc?
It looks exactly like Cingular 8125 but with a little different keyboard layout and sold as vodafone mobile.
I tried to install the ROM from Cingular 8125 and its all work fine except the secondary keys at the flip out keyboard.
If any body could help me I would really appreciate it.
paste this in your browser in phone or pc
ftp://xda:[email protected]
got to wizard
the roms
have fun, i personally like the dopod.
ftp://xda:[email protected]_22113102_021911_DOP_ASIA_WWE_Ship.exe
also make sure you only down roms in your language
wwe- worldwide english
This rom is excellent as well.
ftp://xda:[email protected]/Wizard/Roms/o2/Xda_Minis_Upgrade_v2.21.4.101.exe
also run lokiwiz first...it will unlock your phone.
ftp://xda:[email protected]/Wizard/Unlock/Lokiwiz02b.zip
this links will take you directly to each file. make sure you extract lokiwiz to you desktop prior to running enjoy. By the way trun sCID unlock
by the way they are all the same device
read up
http://wiki.xda-developers.com/
justinstafford said:
paste this in your browser in phone or pc
ftp://xda:[email protected]
got to wizard
the roms
have fun, i personally like the dopod.
ftp://xda:[email protected]_22113102_021911_DOP_ASIA_WWE_Ship.exe
also make sure you only down roms in your language
wwe- worldwide english
This rom is excellent as well.
ftp://xda:[email protected]/Wizard/Roms/o2/Xda_Minis_Upgrade_v2.21.4.101.exe
also run lokiwiz first...it will unlock your phone.
ftp://xda:[email protected]/Wizard/Unlock/Lokiwiz02b.zip
this links will take you directly to each file. make sure you extract lokiwiz to you desktop prior to running enjoy. By the way trun sCID unlock
Click to expand...
Click to collapse
i tried the 1st rom u posted here and it dosen't work 2 my wiza100
i think u r wrong
ChIcO*GsM said:
i tried the 1st rom u posted here and it dosen't work 2 my wiza100
i think u r wrong
Click to expand...
Click to collapse
Chico,
Justin is correct, the Wiza100 & Wiza200 are all the same with only minor cosmetic differences. I see that you are new here so I'm going to politely suggest that you spend some time reading the forums and searching for the information you seek.
I don't know what the layout of the secondary keys is on your Wiza100 but I have a Cingular 8125 branded Wiza100 and have found that all WWE Roms correctly map my secondary keys. If you search the forum, you will find how to change the mapping of those keys.
You will find that other members here are very willing to help you but their patience is limited by your willingness to read and search the forums before starting a new thread that:
Has a vague title, I would suggest changing the thread title to something more indicative of your issue.
Asks for information that is already covered several time in the forum.
Attacks or insults someone who has a greater knowledge of these devices than you.
Good Luck in your Search for "Symbol Secondary Key Remapping".
(If you didn't get the hint then please don't contact me for more).
BTW, this isn't texting or IMing so if you want to be taken seriously don't type like it is.

Wizard/MDA Upgrade Procedure...

Some info about my phone
IPL 1.08
SPL 1.08
GSM 01.09.10
OS 1.8.10.2
I would like to upgrade to the latest i-mate rom ( i think ) i don't know any differences with any other roms etc... ive been looking on the other threads maybe if my question has been answered with someone else... i can get pointed to a proper thread, i just want to know what steps i should take to upgrade my rom, i dont wanna lose any data, not that i have much id like to backup my contacts basically thats the most important, also.. since i dont have money for a 128 card right now would it be possible to load someone elses backed up tmobile mda rom ? if they zipped it up and sent it so i can restore it when i get a msd card.. any help is greatly appreciated , thanks in advance.
Copy your contacts by ActiveSyncing them to a PC, or copy your pim.vol (in the root of your Device) to your SD card and upgrade it.
Good luck.
Ahhh
Ah okay now... which rom should I try out first ? and... don't i need to CID unlock it? i'm trying to find a good thread on the upgrade procedures and the best rom to try first.
Best rom...best rom..... the Rom you choose is a personal choice (and yes, you need to CID unlock first IF you want to upgrade to a Rom of another manufacturer, if you have lets say T-Mobile and you want to upgrade to another T-Mobile Rom, you don't have to CID unlock your Wizard).
I like the Qtek Roms myself, but then again, I only use Dutch Roms, not WWE (WorldWideEnglish) Roms, so I have to make a choice between T-Mobile or Qtek and then the choice is simple in my opinion
If you don't know anything about upgrading, my opinion is, try soms official Roms first, then you know what the deal is and then you can make a choice if you maybe want to use a customized Rom like the Mr. Clean Roms for example.
Regards,
Molski
p.s. There are A LOT of threads about upgrading.
Ah thanks for the info... i tried a beta 2.24 rom i think... its pretty nice, i personally cant tell much of a difference,, connmgr is different has more options etc... im thinking of trying mr clean 2.3 is the latest right ? and if i get this does it include all the office apps and such ?
a second question... i dont like the wifi apps included and i noticed an AXIM dell PPC with WM5 had a nice wifi config app/wifi AP finder, and noticed it was made by Hi Tech Computer (HTC) any way to copy this or use it on my phone ?
check my other thread about my CID unlock problem and let me know if i should try to CID unlock it again... and backup... thanks!!

Backup of ROM?

Hello.
I want to change/upgrade my ROM to WM6. But I want to make a Backup of my existing from first (maybe I'm to stupid to do the Update) and to have the chance to get my MDA Vario back to life I want to make a backup of the ROM is installed at this time.
Could somebody maybe tell me how i can backup my ROM? And... How can I reinstall the ROM? I think it will be moved to the SD Card?
Thanks a lot.
You might want to try this then first:
http://forum.xda-developers.com/showthread.php?t=305294
Thanks for this.
May problem is that I have a "very" new ROM installed (T-Mobile MDA Vario 2.21.2.8 GER). and I'm unable to complete the the CID unlock process (the Netlock is removed allready with the lokiwiz 3a.).
If I'm entering the Bootloader and open mtty I'm .not able to open the USB port.
Does it mean I need to downgrade?
Thanks Maik
There is a newer public T-Mobile ROM on the T-Mobile website: Version 2.26.2
You need to downgrade your ROM to custom 1.05 (check the WIKI page) in order to run lokwiz CID unlocker!
I tried the version 3 of lokwiz but the only one which worked properly on my MDA was the version .2b
How ever,
the CID lock should not effect the MTTY utility. This is an official HTC procedure and should work on any WIZ.
UPDATE:
I just saw that you're talking about a german ROM? The latest public german ROM is 3.3.8 (check the german T-Mobile site for that!). If you want to keep the older 2.21 you can find it at the Austrian T-Mobile site again after downgrading and unlocking your CID
I am running the german rom AKU3.3 myself - it is much nicier than previous versions and has already some WM6 features integrated.
Ok. So I need to downgrade my Device. to do the CID unlock.
Maybe the system firewall and some other settings are affecting the MTTY issue.
I checked the T-Mobile website for the newer German ROM version.
If I check https://after-sales-service.t-mobile.de/eg_online/t-mobile/t_mda_vario.htm (what my Device is) I only see the 2.21 version and NO newer version?
1.
Go to www.t-mobile.de
2.
Click on top on the menu "HILFE & FAQ"
3.
Select on that site "Broschüren & Software"
4.
Now click on the left site menu on "T-Mobile Software"
5.
It takes you to a new page and asks you for your MDA. Don't worry if your PDA is not in the list! Just choose any PDA. It will take you to a new page and show you the selected PDA. Right underneath you will see a link: "Model aendern" - click on that link and then chose as Manufacturer T-Mobile and you will find the MDA VARIO!
Sorry for being so complicate but the T-Mobile site is set up with Flash, so, you can't just copy the link! You always have to go the loooong way! Be aware that you have to temporarely allow popup's ... !
How ever,
I will try to paste the link here to the direct download and I hope it works:
http://www.t-mobile.de/downloads/t-mobile/ruu_vario_aku3.3_3822_382120_026911_tmo_de_ger_ship.zip
Hey the link works....
Thanks. I find out that my Device is a G4 device and I also see that I can't unCID this device... Right?
I'm a little bit in fear that something is going wrong during the Update to WM6 and I have no working Backup on my SD card.
Ok. So this steps I will do. Maybe you can currect me if I'm wrong.
1. I will perform a downgrade to the custom rom 1.05 and then I make a backup after running CID unlock.
2. I make a Backup with the MTTY
3. I will install the WM6
4. If not working I can backup from SD card and maybe install the newest ROM
You only should downgrade for CID unlocking your device! This is required for installing other ROMs than from your cell phone provider!
If you want to upgrade to the new german AKU3.3 from T-Mobile - that should work without CID unlock! You also should be able to downgrade to your existing ROM version in case you just dislike the new AKU3.3
BTW:
If you're planning to upgrade to a selfmade WM6 which you can find all over the web: I tried almost all of them! None was as stabile and good as the german T-Mobile AKU3.3! Sure, they look cute with their VISTA-style look but the functionality is far away from being perfect! Also: Lots of the ROMs are very user-personalized and contain no configuration for your network (such as GPRS and MMS) - my advice: stick to your provider ROMs, either AKU2 (which you're currently running) or the newer AKU3.3 from the link above - at least until you learnt flashing and registry hacking on your device!
WOW I allready can hack the Registry but having sometimes some issues with instructions here . Like I say before... I'm a little bit in fear...
Well, it is understandable! Noone wants to end up with a brick!
There is always a risk in flashing devices! I do it since years now and was unlucky only once by flashing a SIM locked ROM to a Motorola phone. Haven't had any problems since then. The best thing is READING and if you can't find answers just post your question. Next to it is always helpful to check also other Forums or try to find guides in your own mother tongue!
Hacking the registry is not really riskfully - at leat the only one thing what can happen is that your device won't start up and you might lose your files and data. Other than that you should be able in any case to get it running with a hard reset again by holding CON button and Voice Dial button at the same time and press Reset.
Flashing can destroy the device because of it actually erases everything in the device; even the ROM before it writes the new one. But even here you will be able to enter in BOOTLOADER mode in most cases.
Yeah thats right Junner. Reading and asking... Since I flashed my SDA wrong I'm happy to have a Backup on the SD card to get the Image back. If this is the case I'm happy.
I installed AKU 3.3 and it's looking good and working fine.
Maybe I will downgrade to the custom 1.05 and do a backup. I only want to look how the WM6 is looking.
Are you German? Or german speeking?
The ROM backup to SD card via MTTY should work without CID unlocking your device! There is no need to downgrade for that purpose. I had hard times by doing it too. It took me several trials until it worked finally!
The downgrade is only necessary if you're planning to install ROMs from other providers or ROMs in other languages. I asume you're german, so, if you don't believe anything I say - this you can believe: the german AKU3.3 is the best out there you can find for the WIZ
Like I mentioned earlier: all the WM6 ROMs you will find all over the web are user created! They are either taken off from other devices and changed around until they worked on the WIZ or just visual pepped up AKU3.3 ROMs (the one you installed now). Allthough, I did not find any WM6 out ther which did not have issues in one way or another ...
I speak a little bit german , yeah!
We have WURSTFEST here once a year with lots of Sauerkraut and beer ...
Mates, if I read my rom am i going to be able to copy it to pc and Dump it with a ROM Kitchen?

Categories

Resources