Stuck in Headset mode - P3600 General

Hey,
Was using my trinity yesterday like normal, and all of a sudden a call came through and i answered like normal but had no sound. The other person could not hear me either.
This continued for all calls and all sounds of any kind. Found a thread of a person who had the same problem and he still had use of the phone when the headset was plugged in.
So plugged mine in and sure enough the phone works fine. Its like it is completely stuck in headset mode.
Anyone else experience this or have a solution? Haven't done a hardreset yet but im guessing that is my next option
Thanks,
Mike

I have a similar issue.
No sound at all coming from the phone ear-speaker. But if I turn the phone speaker on during a call it works fine.
I returned my D810 after the touch screen stopped working properly, got it back 3 weeks later and now this has happened. Only had it back one day!

my phone spontaneously started working again.
didnt hard reset, didn't really do anything except use it with the supplied headset for the night. It is physically impossible for those things to fit in a human ear, theyre useless.
Anyways I have no idea what happened or if it is going to happen again . . . .
Cheers

Related

JASJAR SOUND PROBLEM

Hi,
Am using a Jasjar. One fine morning the phone stopped ringing. No sound from the speakers at all. Though I could hear the other side on recieving or making calls. My voice does not go.
I sent it for repairs to I mate service center in Dubai (am in mumbai), Got back the machine working today.After making 5-6 calls ,the same problem has started again.
Please advice.
thanks ,
AT.
sounds like they didnt fix it, my 5.1 amp has just done similar, well not similar, but similar issue lol, grrrr
amp stopped doing video, sent to yamaha for repairs, got it back !!!AFTER 2 MONTHS WAITING!!! 2 weeks later its doing it again.
Back to Dubai it goes then! This time, try to shout enough so that they actually fix it. :lol:
A quick suggestion: (just in case)
In some cases people have had problems with sound loss from their Universals caused by the headphone jack. The sensor that identifies whether a headphone is plugged in is faulty and cuts out the speaker sound.
You could try putting a headphone jack into the socket and wiggling it, or plugging it in and out a few times. That might fix it.
I've had the same problem too a couple of times. I found that it was something weird with the battery actually. It always seemed to happen when I switched batteries. Everything would work fine except the audio. I could make a call but the other side couldn't hear me. When I would "click" on anything like Start all I would hear is a small popping sound. I found that if I took the battery back out, and then put it back in and made sure it was securely set in place & locked it the sound would work again. Sometimes I would have to do that twice before it would work again. I'm not sure if it really is a battery thing or something else that gets jiggled when I put a new battery in/out but that's what's worked for me. Hope that helps.

Can't hear conversation unless it's on speakerphone

So, my phone stopped working a few days ago. I've been running WM6 for quite some time now and I've even tried going back to Tmobile's ROM. Basically, when I receive/make a phone call, I can ONLY hear the person if I put them on speaker. They can hear me regardless, but I can't hear them. Pretty annoying.
Any ideas?
Heh! Quite a coincidence!!! I cannot hear anything from the headset either and it happened a short while after I upgraded to XDA6. It work fine with the stereo headset as well as with a BT one. The difference in my case is that I cannot switch to speakerphone. The phone is deaf without a hands-free device.
I have posted a separate thread on my problem - here it is
i have the same problem. phone is dead without a handsfree it happened to me last night all was good, i was listening to music to handsfree and removed them to make a call and it didnt work anymore..i reinstalled the rom, but no sound..any help anyone?
maybe the phone is stuck on handsfree..it things that the handsfree is plugged in or something?
problem solved trustworthy, i've put the jack in and out a few times..and now the sound works there is a switch that is pressed when you plug in the jack and maybe it got stuck on handsfree..try pressing it a few times..i don't know. now my phone works. i'll never plug in a handsfree again
I had the same problem--it was still under warranty...new MDA was the solution.
By the time it goes again I hope the next generation will be here!
I have the same problem as lilcam, the earspeaker is dead. I had the same problem once, and the service chage the speaker, first and the ringer, later and stars working just fine. Now, the silent speaker hits again and service says is not the same problem and they cant repar it. Does anybody have a clue?
Sisqo said:
problem solved trustworthy, i've put the jack in and out a few times..and now the sound works there is a switch that is pressed when you plug in the jack and maybe it got stuck on handsfree..try pressing it a few times..i don't know. now my phone works. i'll never plug in a handsfree again
Click to expand...
Click to collapse
Thanks for the hint, but I REPLACED the handfree jack and it still wouldn't work without the headset
The people, who got it serviced told me that there was a problem with the mmainboard, that they cannot deal with. As I've mentioned in my thread, they also told me that a faulty handsfree jack was a frequently occurring problem with the 9100. I would recommend to pdebeitia and Sisqo to try replacing the jack. Hopefully it might help...it did not work for me though...
BTW, pdebeitia and Sisqo, what ROM are your MDA's running or were runnig at the time when it happened?

MAJOR sound problem

Hi all,
yesterday, the following parts of my Uni stopped working properly:
- speakers
- phone speaker
- microphone
Not only was there no sound at all coming from the speakers, but when I made a phone call, I couldn't hear the other person and neither did they hear me. The phone was thus rendered pretty much useless. I didn't try it when making calls, but when I turned on music, it played without problems when I plugged in the headphones.
Reseting didn't help so I reflashed the unit.
Everything was fine wor a while, but then the problem occured again.
This time, reseting the device solves the problem, but only for a few minutes - then the sound stops working again. EDIT: oh and now I also discovered that it starts working again at some times for no obvious reason and goes back to not working in a short while *CONFUSED*
Does anyone have an idea what it could be caused by and how to solve it? Many thanks!
I had a similar problem earlier.Try putting ur headphone jack in and out a few times,this generally sorts out the problem.It has to do with a small pin in the headphone socket which diverts the sound to the headset when it is plugged in and the pin has to come back in position when the headset is disconnected.What happens is that the pin gets stuck,so even when u disconnect the headset,it still diverts the sound to headset mode.PM me for more details
Longlife said:
Hi all,
yesterday, the following parts of my Uni stopped working properly:
- speakers
- phone speaker
- microphone
Not only was there no sound at all coming from the speakers, but when I made a phone call, I couldn't hear the other person and neither did they hear me. The phone was thus rendered pretty much useless. I didn't try it when making calls, but when I turned on music, it played without problems when I plugged in the headphones.
Reseting didn't help so I reflashed the unit.
Everything was fine wor a while, but then the problem occured again.
This time, reseting the device solves the problem, but only for a few minutes - then the sound stops working again. EDIT: oh and now I also discovered that it starts working again at some times for no obvious reason and goes back to not working in a short while *CONFUSED*
Does anyone have an idea what it could be caused by and how to solve it? Many thanks!
Click to expand...
Click to collapse
try it with bluetooth, if all sounds work fine, then problem is with the receptacle for the headset jack.
Had this problem myself. Took phone apart and repaired.
GL
Thanks, I guess the problem really was in the headset/external switch. It acted like crazy, switching back and forth for no reason, but when I tapped the headphone jack hard with my finger, it usually got ok.
And for the past few hours, the sound worked perfectly, so it hopefully is ok again now. If the problem comes back, I guess I will take it to the service center and get it repaired - I don't think I'd have the courage to do it myself
Anyway, thanks a lot for your help guys.

Can't hear others during a call - earpiece is down

I tried using a handfree and the phone works completely fine, just when on its own I cannot hear from the other side. The other side can hear me though.
I used the phone on its own one night, then without dropping it or whatever that earpiece just failed to work in the morning the other day. I tried hard reset and even ROM flash. How likely this issue to be a software crash?
Thanks!
jacky
I had exactly the same issue, had to send it to repair. Still waiting for it to come back.

Speaker phone, volume, headphone jack issue

Whelp today I made a phone call on my turbo, and while on the call pressed the speaker phone button and it didn't work. Didn't think much of it at that moment. Then later did a hangouts call with a friend, and still the speaker phone didn't work. Tried using my ear-buds and they didn't work either. My other pair didn't work as well. Also turning down the volume didn't work for some odd reason. Finally i ended up restarting the phone and everything seemed to be fine again. Anyone have any idea what could have caused this. Anyone else have these issues happen?
It happens when you takeout the headphones slowly or something and the software or hardware thinks they are still inserted hence why speaker doesn't work. Has happened to me twice. It's not a big deal and a restart works fine back to normal.
wadamean said:
It happens when you takeout the headphones slowly or something and the software or hardware thinks they are still inserted hence why speaker doesn't work. Has happened to me twice. It's not a big deal and a restart works fine back to normal.
Click to expand...
Click to collapse
Ah okay that makes sense. Made me freak out a little at first when it happened. Glad its nothing bad.

Categories

Resources