i've flashed my Qtek 9100 G4 with the original rom from manufacturer because it keeps hanging or reacts very slow when I tap the screen. Now the stup wizard shows to outline the screen. When I tap the crosses the move very slow across the screen en after a few taps th phone hangs.
What could be wrong ?
Related
I have a cingular 8125 (wizard), flashed with 2.16.9.1. Since the update i've been VERY happy with performance, except ofcourse, with the fact that if i open (or close) the keyboard, and the screen goes from landscape to normal (and vice versa), I have about 2 seconds after I hit any button and get a reaction.
As an example, if I turn the phone on in normal mode, then open up the keyboard (screen flips), and hit the 'contacts' button, it takes ~2 seconds before my contacts come up.
is this just the way the device is? I can't remember how it used to be with the regular rom, since i flashed it the day i got it...
I have a qtek 9100 comes up straight away. Have you tried registry wizard it increases performance inc in keyboard mode.
Hi all,
Like many people's, my Hermes (T-Mobile Vario II) suffers from screen misalignment issue, and needs re-aligning almost daily. I've done all the mods but to no avail. It is out of warranty so I can't send it back.
Recently, when I try to align the screen (by pressing Confirm button + Message button, or by going to Settings > System > Screen), it just hangs in the "Align Screen" screen - it does not respond when I tap on the target cross.
Only a soft reset can take me out of the screen.
I am using Schap's January 2008 version.
Any idea why please?
But screen now is misaligned really badly and I can't re-align it...
Thanks.
EDIT:
But it doesn't happen every time. Very occasionally it would work...
wywywywy said:
Hi all,
Like many people's, my Hermes (T-Mobile Vario II) suffers from screen misalignment issue, and needs re-aligning almost daily. I've done all the mods but to no avail. It is out of warranty so I can't send it back.
Recently, when I try to align the screen (by pressing Confirm button + Message button, or by going to Settings > System > Screen), it just hangs in the "Align Screen" screen - it does not respond when I tap on the target cross.
Only a soft reset can take me out of the screen.
I am using Schap's January 2008 version.
Any idea why please?
But screen now is misaligned really badly and I can't re-align it...
Thanks.
EDIT:
But it doesn't happen every time. Very occasionally it would work...
Click to expand...
Click to collapse
Answer is easy... Schaps roms have "Ftouchflo" installed. It is nearly sure it is activated on your phone. In this case, the alignment utility is NOT usable. And the pda can stay with a non reactive touch screen till next reset.
Desactivate touchflo by using the touchflo configuration tool followed by a soft reset. So you will be able to use screen alignment.
Just tried and yes! Thats it!
Thanks a lot matey!
You are welcome
Perhaps this should have it's own thread but it is very similar.
My tytn (WM6) has suddenly developed a strange problem. When I go to align the screen, the crosses appear as normal and when I point to them, it appears to be working. Except... After pointing to the last cross, the whole thing starts again, and this happens continuously!
This started when I applied a screen protector and tried to align the screen through it. It was working fine before then. I have taken the screen protector off again, but there is no change.
As I've spent the whole day installing cab files and getting it as I like it, syncing etc. too, I really don't want to have to hard reset it again.
Any other ideas?
That usually means more than 1 point is touching the screen.
That's what I thought but I've cleaned the screen and done the business card trick all round the edges. I can't see where it could be touching...
Any other ideas or suggestions that may help?
I couldn't find a touchflo "disable" button anywhere on my Hermes, but I did go into "Remove Programs" and uninstalled the HTC Cube application, then did a stylus soft reset, then aligned the screen with no problem.
Hi,
on my xda exec O2 I have installed the ROM Vodafone italy and everything he has gone ok.
When I have installed the patch for the extended memory I have begun to have problems.
The device thick freeza and it suffers blocks, Therefore I have decided to again install the ROM, but during to calibrate the screen it doesn't go anymore before.
It continues to for some then it jams.
I have tried to install other ROM, the Qtek but from the same problem.
Do you advise to use MTTY?
TiA
If so, remove it and test the response from the Touch Screen.
Screen protectors can interfere with the sensitivity and accuracy of the Touch Screen.
Attempt to re-align the screen by going to Start>Settings>System Tab>Screen and then tap on Align Screen or press and hold the Center Navigation key and then press the Internet Explorer Button. Note: To ensure accuracy, Screen Alignment must be completed using the device Stylus and no other object
Firts I thought it's a SW fault,some dials when pressed caused pressing on a neighbour (for example...when i pressed A it caused letter S to be pressed. It encounters on bottom left corner of the touch screen. I tried switching the ROM but it became much worse. Other parts of screen work mostly fine....
Any suggestions?
Regards
Sorry,i found out that a ROM of a Monx did't go trough a screen aligment process,now everything works fine......obviously it was the T-Com ROM error.....
After doing a hard reset on my perfectly-functioning Pro the other day, the screen and buttons have now stopped working. My question is two-fold:
1. What the heck is going on?
The phone worked fine until I did the hard reset. Now, when I do a hard reset, everything appears to work correctly through the screen-alignment. The screen responds properly at that stage. Immediately afterward, the normal Today screen pops up for a split second. After that, the "Treo Customization" screen comes up, and that's where it all goes to hell. After the "Treo Customization" runs its course, the phone says "tap screen to reset." After tapping the screen, the phone responds and resets itself.
After that, a blank today screen appears. The tool bar on top is there and the background is there, but that's it. The screen and buttons are unresponsive except to brighten the screen after it periodically dims. Several other functions continue to work. I can activate wifi via the side button. The top button turns off the screen. Strangely enough, the QWERTY keyboard is completely unresponsive, except that the search button works (alt button and magnifying glass).
Does this sound like a hardware problem? Could it be fixed with a flash and new rom?
2. I tried to flash the phone and install a new rom to see if that would help, but I was unsuccessful for the following reasons: 1) When I run PANTHER_CDMA_HSPL_V101, the bootloader screen appears, but immediately upon that occurring, my sync connection disappears, so I can't proceed through my computer. 2) I can't run the manual flash program (SSPL-Manual-PantherCDMA) because I have no functioning controls on the phone itself.
Any ideas? Is there any way to achieve a flash on an unresponsive phone, or should I start shopping?
Thanks!
Mark Pemberton