Hi peeps.
After reading through various posts on this board, I thought I would hard resst my exec and install the cabs manually as suggested to get the features I want without the bloatware.
So far so good, installed everything I wanted and the connections only cab that is availble but, my MMS doesn't seem to work.
There is no MMS account in poutlook and there's noway that I can see of composing new MMS messages.
How does everyone else go on with this because when I've looked through some of the posts, everyone says thier SMS is working OK.
It's probably something stupid... :roll:
Cheers,
Smiff.
See? That's what happens when you don't proof-read your posts - there's loads of spelling mistooks and typos; and then no-one responds.
But seriously, someone else must have seen this as I'm not the only one to do a minimal install. Any ideas?
Cheers,
Smiff.
Answers in this thread for the cab file to install.
http://forum.xda-developers.com/viewtopic.php?t=32527
I've read that one multiple times but still have no working MMS in this situation...
I THINK
I beleive you have to create new account. It appears to be setting up email just continue through and at some point you can select type and set to mms. Then highlight account click on settings and put in your providers mms setting and bingo...
must say I havent had this problem on the exec but did on xdaiis and that solved it..
hope that helps
stay happy
magpie2000k
Hi
Thanks for the tip but unfortunately, it didn't work that way
However, I have managed to get it working now - i did a hard reset again and a clean install and then installed 5 cabs - voicemail one, bt patch, both "shortcut" ones and the uaprof one.
The only thing I did differently this time from all the others is that I switched it off with the power button and on again before soft resetting it - i'm pretty sure that this did the trick
Cheers,
Smiff.
I originally posted this in the Hermes section but I now realize it should have been posted here. Please excuse the crosspost though.
Our Blackberry's have a way called "Level 1 Messages" to react differently to incoming emails based upon Sender and/or Subject text. This can include playing a different notification alarm and/or vibrating.
I'm trying to implement the same functionality into our new Cingular 8525 devices (WM5) and I'm not having much luck.
I've tried working with the POOM (Pocket Outlook Object Model) and it seems that doesn't cover incoming emails.
I then tried looking into MAPI and it seems that Messaging related issues only deal with SMS messages. We receive our Exchange email via Activesync over OWA (I think) and so that leaves MAPI out.
I am both amazed that this is that difficult and amazed that there aren't 500 questions related to this already here as I thought this would be a VERY common need.
If I can't figure this out, we'll have to go back to Blackberry and that's not what I want to do.
I looked at the software phoneAlarm and it supposedly has this functionality but it is very unstable and we could never get the Custom Email alerts working.
TIA - any help at all will be greatly appreciated.
Yes, I searched first and followed all those goose chases but I still have not found a working solution.
I'm interested in such an app as well and have been unable to find one. I'm reviving this thread in case something new has developed.
Phonealarm provides such functionality, as well as an application from Quore fucntions called "inboxtones". Google it
Hey evry1. I've got my Mogul running the "official" 6.1 update and everything was working fine until i noticed that i cant recieve any "incoming" bluetooth files anymore. I can add/connect/send files and pics to other phones, but when someone tries to send me something, their phones all say "unable to connect". I dont see any incoming notifications on my phone screen and i have them added on my "known devices" list. Anyone have any ideas? I did a hard reset and reinstalled my programs and still the same issue. Appreciate any info...!!
This is normal. Incoming OBEX is disabled by default in all sorts of Windows Mobile phones for some reason. I should tell you to search because this has been covered many times, but here are the registry keys:
HKLM\Services\OBEX
(Change the "Keep" setting to "0")
HKLM\SOFTWARE\Microsoft\Obex
(Change "IsEnabled" to "1")
thats the thing, i did search prior to my post and my registry does have the entries you posted and i still dont get any incoming beams..not quite sure what the deal is
You do have the accept all incoming beams tab checked right?
kinjus0675 said:
Hey evry1. I've got my Mogul running the "official" 6.1 update and everything was working fine until i noticed that i cant recieve any "incoming" bluetooth files anymore. I can add/connect/send files and pics to other phones, but when someone tries to send me something, their phones all say "unable to connect". I dont see any incoming notifications on my phone screen and i have them added on my "known devices" list. Anyone have any ideas? I did a hard reset and reinstalled my programs and still the same issue. Appreciate any info...!!
Click to expand...
Click to collapse
See I have some of the same problems you are having - both with the mogul and with the touch.
but I cant even SEND contacts or pictures at this point, let alone recieve them.
I used to be able on 6.0 to open a contact.. hold the stylus on them - click on send and click bluetooth and presto - sent.. I cant do that now..
Supposedly there is another fix around xda according to another tech that I talked to during the HTC training we had yesterday.. and btw - the htc rep had no idea there was a mogul / touch bluetooth issue.. jerkoffs..
anyhow - thoughts? comments? Links to the fix that lets me send photos and contacts via bluetooth?
-Shdw
Features:
*Dials numbers through your Google Voice account and has them ring back to your phone. With this app, your phone will automatically pick up the call once it comes in without your phone ringing.
*Sends and receives SMS messages through your Google Voice account with DATA.
*Integrates with your Windows Mobile contacts, so that you may dial to your contacts that already exist on your phone.
New Features from website download:
*SMS conversation threading
*Visual Voicemail with transcripts
*SPEED
This application works on Windows Mobile 6+ Professional with NETCF3.5 and above phones. The regular version should fit all QVGA-VGA phones, and the square version is pretty self explanatory.
Disclaimer: IT USES THE INTERNET TO DIAL AND SEND SMS, SO IF YOU DON'T HAVE A COMPARABLE DATA PLAN OR WIFI, DON'T USE IT.
The most up to date CAB will be on the OneDialer.com website, and you can get updates on Twitter here, and help on the forum here.Thanks.
-m_drunk
Update: Latest version is here: OneDialer.com
Awesome app - waiting to fix my phone so I can try this latest version. Really love the sms abilities!
this is soooo coool! one question i have for u...how safe is this really? because as u know GV links to your gmail now and whoever gets access to your gv will have access to your gmail!
m_drunk - my hero.
I will post some feedback as soon as possible.
Currently having some fun with it.
savior02 said:
this is soooo coool! one question i have for u...how safe is this really? because as u know GV links to your gmail now and whoever gets access to your gv will have access to your gmail!
Click to expand...
Click to collapse
It's as safe as anything else you do on the internet. Like I said, I'm not logging any credential info....it just gets passed to to google with SSL.
I noticed a bug, when you manualy dial from the dial pad you can't dial the number 0, when you dial 0 it comes up as a 9
agrenwa said:
I noticed a bug, when you manualy dial from the dial pad you can't dial the number 0, when you dial 0 it comes up as a 9
Click to expand...
Click to collapse
Fixed and re-posted the new cab.
Nice stuff.
My specs are:
Omnia running 6.5 - WQVGA screen. I know some of these problems might be related to that.
First, I love the fact that you now have that SMS history. It kicks serious ass - I can use my keyboard with xt9 in it no problem or shapewriter - so great work.
However, I do have a problem when it comes to loading my contacts... for some reason nothing shows up. Before I was able to. So, now if I need to send an SMS I have to go into voicemail find the contact and then sms there.
How is the notification system going?
Is there a way to integrate the phone contacts with one touch - or visa versa?
Anyhow, Kudos... great work.
Looking forward to future releases.
Relay address?
I would like to use this with my T-Mobile ToGo prepaid service. However, their data service is restricted to certain sites. There is a workaround but I need the IP address of your relay in order to make the mod on my phone. Oh, and I need to be able to change the URL of the relay to something with tmobile in the URL. Basically what I would do is create a dyndns entry of tmobile.dyndns.org (or something) and then link that to your relay IP address.
Is there a way to change the relay URL in the application and can I get the IP address of your relay? I think it may work.
Thanks
sid0101 said:
However, I do have a problem when it comes to loading my contacts... for some reason nothing shows up. Before I was able to. So, now if I need to send an SMS I have to go into voicemail find the contact and then sms there.
Click to expand...
Click to collapse
You know what, I actually have a problem similar that I just noticed. It only loads mine up to the P's. Before it was a data source, and now it's enumerated. I'll work on that....don't know what it going on just yet.
sid0101 said:
How is the notification system going?
Click to expand...
Click to collapse
Huh? What notification system? Do you want one? Like when a new SMS comes in, you want it to tell you?
sid0101 said:
Is there a way to integrate the phone contacts with one touch - or visa versa?
Click to expand...
Click to collapse
Not really. What I had before, and what I hope to have again in a little bit is as close as I could get it. I did improve how the contacts worked, but it looks like I broke it too. Hopefully, I'll have the fix out later tonight.
mynametaken said:
Is there a way to change the relay URL in the application and can I get the IP address of your relay? I think it may work.
Click to expand...
Click to collapse
No, yes, and no it won't.
m_drunk said:
You know what, I actually have a problem similar that I just noticed. It only loads mine up to the P's. Before it was a data source, and now it's enumerated. I'll work on that....don't know what it going on just yet.
Huh? What notification system? Do you want one? Like when a new SMS comes in, you want it to tell you?
Not really. What I had before, and what I hope to have again in a little bit is as close as I could get it. I did improve how the contacts worked, but it looks like I broke it too. Hopefully, I'll have the fix out later tonight.
Click to expand...
Click to collapse
The notification system would make this awesome. I thought that you might have been working on one because I think you said that the other thread. Anyhow, it would be great if a notification system could be implemented somehow.
And I guess as far as features go - I know that you were not paying too much attention to aesthetics, but perhaps you could have a button on the dialpad for the SMS history, contact list, or favorites, or something... that way the dialer would just be the main dialer I always use. This all piggy backing on the hopes that you get the contact list to work.
Anyhow, heres to future builds
::cheers::
sid0101 said:
I thought that you might have been working on one because I think you said that the other thread. Anyhow, it would be great if a notification system could be implemented somehow.
Click to expand...
Click to collapse
I was just messing with you. The notification is already there, I just commented out the messagebox that tells you there's a new message. I did that because I'm trying to figure out how to send the event to the phone instead of a message box, because the MB won't pop up if the app is running in the backround.
sid0101 said:
.. but perhaps you could have a button on the dialpad for the SMS history, contact list, or favorites, or something...
Click to expand...
Click to collapse
if you don't put in any numbers and hit either the dial button or the sms button, the former takes you to your contacts(and I think I know what's wrong with it, fixing it now), and the latter takes you to SMS history.
sid0101 said:
However, I do have a problem when it comes to loading my contacts... for some reason nothing shows up. Before I was able to.
Click to expand...
Click to collapse
Not a problem anymore. Fixed the contacts and a couple of other things and posted a new cab.
Great progress on this app (and in such a short time!). Finally just got the latest version installed and am playing around with it.
The buttons appear to be too big - I would guess I can see about a quarter of the icon I'm supposed to be able to see for ech of the numbers and the dial and SMS buttons down below.
When I click over to SMS history I get a "could not retrieve messages." error.
Dialing gets me a "web exception" error.
Im gonna keep playing with it though.
whoops. new build. should work now.
fixed the smsmessage history "error parsing message xml" error. new build posted. also fixed a small contacts error.
Is there a way to add an auto update function?
The screen does not fit properly in SE Xperia X1a. Can you make a version for WVGA?
- TKN
waiting on qvga. would be happy to test.
Hey Forum!
How do I automatically cc/bcc myself in to emails that I send so I can have a record of the emails I send from my phone?
I've been searching round this forum looking for the answer but haven't found it yet! (I've probably been looking in the wrong place...)
Thanks for any help!
Does anyone know how to do this (or something similar)? I need to be able to do it to comply with our ISO stuff!
Yes, this is an important glitch in WinMo. I can't understand why this feature is missing. In the Palm world it worked very well.
Doesn't anyone know how to do it. Input something in the registry or anything.
Regards
Are you guys using Mail via an exchange Server/Active Sync? Then why not just enable the sent-folder to be synced as well or isnt that what you are looking for.
Inbox-->Menu-->Extras-->ManageFolders (or similar im not sure about the WWE translation)-->Enable the checkbox next to your Sent-Folder
Hi,
No, I'm using regular pop-mail.
Of course one can always do this manually but it would be nicer if it was set as default.
Regards