Database Users

??? Has anyone MY|PHONE PROFILES ???

Has anyone this great app?
http://geocities.com/myppcpe2003/index.htm
Maybe a key for it?
I'D like to use it :twisted:
It appears to be the best prog that I've looked for to switch my XDA2 to a changeable caller profile phone like a nokia!

I liked this app initially, great interface and lots of functionality, however I found a few problems:
Sometimes after changing profiles the ring would be silent when it should be heard - the dialog would pop up showing the caller, but no sound.
You can set it to automatically revert to the normal profile after <n> minutes, or at a certain time. For me this only happened when the XDA was on - thus if it should have switched profile and then a call comes in before you have switched on the device it still uses the wrong profile.
If these problems can be sorted it would be a great app.
As for a key... go to PocketGear and but it!

Yeahh..So It's not a perfect software again.
Do you know any program that analyze the caller from the contacts and you can select for example just one number or one goup to receive? The other ignored or silent like Nokia phones.

I have come across MUTX RingToneX which allows you to set ring tones by contact or category so this may well give you what you want. Can't tell you how good it is, but you can get a free trial from the link below:
http://www.pocketgear.com/software_detail.asp?id=8675

Thx for the answer but I'm looking for an app with easy switching between sound profiles.
For example:
A) MODE
Every unknown number has RINGTONE1
FAMILY group has RINGTONE2
FRIENDS group has RINGTONE3
MY CARALARM SYSTEM (has a mobile calling function) has RINGTONE4
...etc.
B) MODE
Every unknown number is silent or ignored
Every other group than MY CARALARM SYSTEM is silent or ignored
MY CARALARM SYSTEM is ringing and answered (at night while I'm sleeping I want to receive just the call from my car's alarm system)
It's just a simple thing that a lot of phone's using. (Nokia & others)
I hope somebody understands my problem and knows an apllication with the ability I wrote above.
Thx

I think (not sure!) that you need a combination of two programs:
JGUI My Phone Profile AND IA Caller ID (OR Caller2picture)

Tekflow said:
I think (not sure!) that you need a combination of two programs:
JGUI My Phone Profile AND IA Caller ID (OR Caller2picture)
Click to expand...
Click to collapse
THanx the answer but I'm sure (not think) that I don't need the combination you wrote because My phone profile can switch just sound profiles with setting the ring volume or vibrating, IA caller ID can add a picture to a call, Caller2picture can add a ringtone and a picture to a call.
But I need what I wrote upper, please read it perfectly, because it is something different.
I need a software that has the ability to verify a caller-group and for example you can reject all number/call except the caller-group you set like with Nokia phones.
ANYBODY DOES UNDERSTAND WHAT I WANT???????
Maybe because I'm from Hungary and my english is not so well..... :?

My Phone Profile 3.1
My Phone Profile 3.1Full
Reg Code: TMPP-1177-JGUI
Have a fun!

If you have an XDA II, you don't need to get the IA Caller ID because it's already on the XDA II. IA Caller ID is called Photo Contacts in the XDA II.

Caller2picture can add a ring tone to a group. Whenever you want to reject a specific group, give it a silent ring tone.

@VHS: bad boy... i don't think that this should be made public... software worth using is worth bying.

hehe ...bad not bad, but apart from that a/m ...
discussion has been pretty much interesting to me as to sound profiles etc, I have been also looking for some time for software allowing for easen phone handling
regards and Happy New Year,
monika

Finger Clix
Check this:
http://www.imaginet-software.com/index.aspx?p=fingerclix_en
It is the best phone dialer ever!

thank you
I wolud give it a try
regards,
monika

:? :x :evil:
So..Nobody understands what I want.
OK.
Tekflow:
Thanx, but I know that I can set a silent ringtone for a group with one of these softwares. But I NEED SOMETHING DIFFERENT:
I have a car within a mobile-phone-alarm-system. If somebody does something with my car, this mobile (in my car) calls my mobile phone which is with me. So, usually (always) I switch off my phone by night. But if I switched off my phone I would never know my car's calling. That's why when I had a Nokia7650 I can set a profile called Night-profile which has the settings with all calls + all groups has a silent ringtone and my Car-alarm-number has a loud-sirene-ring. That caused when somebody called me except my car my phone was silent. When my car called it ringed with the highest level. And if somebody wanted to stole my car I had heard it. But not now. Because I don't want everybody to call me from 6 a.m., that's why I switch off my phone, but if I switch off my phone I can't hear if my car's calling me.
That's what I can't set in my XDA2.
With no any of your suggested programs.
I know all of them, and I know none of them has the ability I wrote upper.
SO........SOMEBODY UNDERSTANDS WHAT I WANT TO SAY SINCE DEC.05.???????????????????????????????????????????????????????
p.s.:I think so that FingerClix is the best dialling program for the XDA (I use it), but I need another thing, not just for dialling or to give a ring volume for all numbers and groups. My phone profiles can set just a general volume and vibrate settings without any choice to give a different volume for just one group or one phone number like Nokia.

(Maybe since dec.5 there's an update for MyPhoneProfiles or for the others and they have expandable ability?)

I (hopefully) understand what you talking about (have had a Nokia for years...), but i'm not aware of such a tool at this time for the MDA/XDA.
regards,

If I understand you: you need a program that gives you the opportunity of turning off the sound of the telephone for all incoming calls except one number or one group of numbers, or, better, to make call barring for all calls except for one number or one group of numbers (some kind of filtering). I also don't know if this kind of program is available for the Pocket PC Phone. Anyone on the forum aware of this ?

anybody has version 5?

I think what Tuningszocske want is something like Blacklist in Nokia Symbina phones. I know of a Chinese program call CallerFirewall, it allows one to add contacts to black or white list, you can choose to block all contact in black list, receive call only from white list or block all incoming calls etc. This program is compatible with dopod686、O2XDA、T-Mobile、and LegendT108.

Several questions regarding MDA Vario usage

Hello to the forum members!
Since I am a new Vario user there are some questions that you might be able to answer:
1) Is it possible for Alarm funcionality to wake up device from power off state? So alarm works very well when Vario is in standby mode but I would like my Vario to wake me up in morning and I turn it off over night.
2) How can i UPDATE existing phonebook record with entry from Call History? So lets say I already have Peters contact record that includes his mobile number and now he calls me from his landline. There is new entry in Call History that shows his landline number however only available option is "Save contact as" which means that new record will be created. I dont want to create new record but to update existing Peters record with new info (his landline number). Is this possible?
3) How to send sms to a group of users (for example all users in one category). Picking sers one by one doesnt sound too good to me.
4) Is there a more advanced manual than plain users manual that is shipped with the device? Becouse many of more advanced topics such as establishing VPN connections are not covered...
Drazen

Please... How do I make a shortcut to get to call forwarding

Just got my new Orange M3100 (Tytn) and I'm having problems with trying to forward incoming calls to another number. I have to divert and cancel divert often during the the working day and could do with a short cut to the settings call forwarding page. I don't seem to be able to make one... Could anyone advise...
Also trying to do similar with Bluetooth settings as I swap my BTheadset between phones just as frequently. I have found a link on this site to a utility to do that but not had chance to try it yet...
Can I just make a shortcut to that as well ??
Apart from that it appears a excellent device, running Tomtom etc without any problems....
Thanks in advance Phil

All the ways I tried to create such a shortcut do not work, because it requires an USSD "call". I asked WM5NewMenu author to implement USSD handling, will see...
For now the best solution I've found is to assigh speed dial keys in the dialer to USSD sequencies to divert and cancel diverts. It's OK for a while because speed dial keys can be easily accessed with one hand only (green phone button, then arrow left or down).
EDIT: In case you don't know USSD sequences... You'd better consult your operator to be sure. For me:
Divert all calls: **21*number_to_divert_to#
Cancel divert of all calls: ##21#
There are also codes for conditional diverting, of course.

Hi Phil,
What Lurker0 has mentioned is a good idea. You can save those strings as a number in a contact and maybe assign a speed dial or voice tag to that contact for speed? I guess one contact to enable and another to disable. The commands Lurker0 mentions are standard over all networks.
I'm not sure if there are ways to send AT commands to the modem in the TyTN (M3100) but it is another possible way to do it if someone knows how, if not then it might be useful info to someone else.
The AT command you need to send is AT+CCFC=1,1,<number>,128,1,,, this is the number in local format (no +44) like 07968xxxxxx to enable and AT+CCFC=1,0 to disable.
Gavin.

Phonealarm may be a simpler solution as I think u can add a forward number within a profile so just switching profile from the Today screen (phonealarm skin) would do the trick...
www.pocketmax.net

I've not had any dealing with the ATM commands so to be honest I wouldn't know were to start. I've just tried to install Phone alarm in my Orange SVP
M3100 but after asking me if I need and extra language the software just locks up.. Soft restart then required....
I managed to find the directory that it was installed in, the setup prog is there but I can't find the executable file, I guess that it has not got that far !!!!
Any help please...Phil

I'd suggest to try USSD codes as the easiest and 100% working solution.

Tried the ussd numbers in the contacts list.... works very well both divert and cancel divert... Just need to setup the speed dial now, were is that manual !!
Thanks again.
Phil-w

Hi Phil,
Go into the phone skin (green button) > Menu > Speed Dial...
That's you...
Gav.

Speed Dial is also at "green phone button" then arrow left, or arrow down, or wheel down. So one hand operation is possible.

Many thanks to you both... Nice to find helpfull people on here... Phil

phil-w said:
I'm having problems with trying to forward incoming calls to another number. I have to divert and cancel divert often during the the working day and could do with a short cut to the settings call forwarding page. I don't seem to be able to make one... Could anyone advise...
Thanks in advance Phil
Click to expand...
Click to collapse
Phil,
I do the same and installed the O2Plus (and patch) software which tweaks the today screen and gives direct access to mutiple profiles for different forwarding options - works really slickly.
Check this forum for the .cab files
Hope that helps.
Rgds
Lifechanger

i tried putting the codes in a speed dial but Tytn unhelpfully said i had to enter the sequences in from the phone pad directly. all i did was put the **21*<no># in as a speed dial. did i miss something somewhere?

If you are rooted, start a shortcut to "Activities". Scroll down to "Phone", expand that, then scroll down to "Call forwarding". Select! Easy peasy.

call filtering w/TAPI?

Hi,
This is my first post, so I just wanted to say that I really appreciate all the support you guys have offered here, this place is probably the most informative source for working on these blasted devices.
I had a question about TAPI, cprog.exe and a couple of applications that are floating around out there. I have noticed a couple applications that appear to "call filter" calls. I was wondering what the basics is for this to work? The applications appear to be independent of cprog.exe but yet claim to control its behavior. The only TAPI call I can find that seems to be relevant is lineSetCallBarringState() but I'm not convinced that would do it... any ideas?
Thank you very much for your time.
-Jake

I think you probably want lineDrop (or lineRedirect?). You can call lineDrop in the lineCallBackFunc, after you receive lineOffering message.
check out the CeDialer sample, or here's a recent thread about getting caller id.
http://forum.xda-developers.com/showthread.php?t=303050
After you get the ID you can drop the call if you don't like it

Call Timer

Does anyone know of a good call usage monitor. I use to have Phone Dashboard but I can't add this to the HTC Homepage. The call timer in Windows Mobile only monitors all calls not just outgoing calls, as far as I can see. Any ideas

pda-prof said:
Does anyone know of a good call usage monitor. I use to have Phone Dashboard but I can't add this to the HTC Homepage. The call timer in Windows Mobile only monitors all calls not just outgoing calls, as far as I can see. Any ideas
Click to expand...
Click to collapse
Ummm....have you checked under the call history button on the dialer? When you launch your dialer, click on the call history button. If its showing you all calls click on menu-->filter and select only outgoing calls. It should show you only outgoing calls now as well as durations for each. At least that's how it is on WM6....I don't know if they've changed if for 6.1

Nope. You can view only the duration of the calls when you open Call History and select specific person in it. Or through Contacts -> Click contact -> Menu -> View all calls.
It is very disappointing, because at least I want to know the duration of the last call. Doesn't matter if I end up the call or the other party. This dialer doesn't show last call time!

Thanks [email protected].
However, the Call History lists all the calls made or have come in via the filter. However, I want to know how many minutes a month I have used and unless I try and add all the outgoing message together, I'm stuck.
Under Call History there is a button called menu which gives the option "Call Timer" but if you click on this it gives you the total number of calls made since last hard reset (I assume) and the number of minutes used since last reset. Most people, I would think, with a contract want to know the number of outgoing minutes since last reset (with reset being since the last cut off date for calls on their contract). This appears to be missing. Can anyone help or know a program that does this that could be intergrated with the HTC homepage.

pda-prof said:
However, the Call History lists all the calls made or have come in via the filter. However, I want to know how many minutes a month I have used and unless I try and add all the outgoing message together, I'm stuck.
Under Call History there is a button called menu which gives the option "Call Timer" but if you click on this it gives you the total number of calls made since last hard reset (I assume) and the number of minutes used since last reset. Most people, I would think, with a contract want to know the number of outgoing minutes since last reset (with reset being since the last cut off date for calls on their contract).
Click to expand...
Click to collapse
I'll second that, any way of\software for knowing how many minutes have been used in the monthly bundle?

Try Home Screen Plus
Have you guys tried Home Screen Plus? Its a great piece of software...and If I'm not mistaken it does have a feature to track call timers etc. Give it a shot. Its free Make sure you download the latest version. I know of a lot of other older versions floating around.

that is a real cool app but also a little heavy just for the calltimer. Anything with a small footprint out there?

Thanks Guys. However, I want to keep the HTC homescreen but I don't think you can add bolt ons to it, so any homescreen add-on won't work. I need a program that runs on its own that monitors the minutes and then being able to access it via the programs tab.

Found - LCMinutes
Not the easiest to configure, but once you grasp the concept it's a doddle (and elaborate).

LCMinutes :X
so i played around with LCMinutes and all it did was give me a headache! lol
i found this and wanted to share:
hxxp://www.hudsonmobile.com/products/phodash/index.html
is very very neat and a very easy to configure
ta

I had heard it didn't work on the HD but if it does, how about sharing it on the wiki

Can anyone comment if this works with TF3D?

Call timer on Dutty´s Touch HD 2.1 is missing?
Hi there!
Anyone having problem with a missing call timer on Dutty's 2.1?
Or should I do a hard reset?
Thanks!

I am using phone dashboard which I find is very good and should suite your needs. Without Today screen it is a pain to use but still possible. Goto settings->Today then highlight the plugin and options. There is one tab which shows you the usage. But you have to "regenerate" the data before viewing.
Alternative, why dont you just run TouchFlo + Today screen (using TFD or SecondToday).
I know phoneAlarm also have a call duration tracking but phoneAlarm is just too much of hassle to configure.