Since a couple of days I have the following problem:
When I switch on the Jabra BT250 the hand free symbol appears in the phone aplication, but when I call or a call comes in, the symbol disappears and the headset doesn't activate.
I tried already deleting and and pairing it again, without success.
Some time ago it worked without problems.
Any ideas?
Just asking again, if someone knows about this problem.
It looks like a ROM problem...
I have this original ROM:
ROM: 2.22.17.2 ESN, Date: 3/23/06
Radio: 01.16.11
Protocol: 4.0.13.21
ExtRom: 2.22.17.102
It's a G4.
Related
HELP! i've spent an hour looking thru bluetooth posts for someone having the same problem but no luck. here is what happens: i'll be on the phone, using my motorola HS810 bluetooth headset, and 5 minutes into the call the ppc will auto-power off. the phone call stays connected and i can hear the caller on the bluetooth headset but they can't hear me.
so, when the ppc auto powers off the phone works fine (as it should) but bluetooth drops. the only solution i have is set the ppc to not auto powe off, but then a calender reminder pops up, i don't see it, and my battery drains.
is there a way to set the ppc to not power off while a phone call is connected?
any ideas?
used to happend to me..
updated the rom which solved the problem.
great to hear, i've been reading up on upgrading my rom. all the posts i've followed say i will require 'romupdate.exe'. becasuse the read me file is in german for the mda rom upgrade i found on the site i cannot tell if ths file is inclueded in the zip or not. do you know if i need to download rom upgrade software to perform this operation or is it part of the zip package?
thanks
Hi,
I'm using ROM version 1.03.00 WWE on my I-mate Jam. Which rom is required to avoid the 8 minute bluetooth mic loss?
Thanks,
GP
Guys
Since the upgrade, everything has been working great, with the one exception that the bluetooth pairing with my BT car kit (Parrot CK3300) keeps dissapearing from the XDA.
It works for a few days (using TomTom 5) then it suddenly dissapears, and I have to set it all up again.
Any ideas?
Ta
they is quite a few of us in the same boat, i have tried a few things but am stump now just waiting for parrot to release a new firmware for the ck3300
Thanks
Paul
Try to upgrade Radio to 1.11 , it's responsible for BT too.
Has anyone any experience of this while using Radio 1.11?
This all worked fine until after the ROM upgrade, so is it likely that the Parrot will need an upgrade?
It works ok for a few days then the XDA suddenly bleeps when it tries to connect with the car kit, then there is a dialog box on the XDA screen asking for the passcode to pair up..., I've put the password in (1234), but it always fails... then thats it ... pairing lost
Any clues anyone... this is really starting to frustrate me :x
Ta
1.11 fixes it, but...
When I upgraded from the stock O2 ROM to the T-Mobile one, I found that when ever I switched off my GPS unit, I needed to re-pair it for it to work again. Upgrading to the 1.11 Radio Rom did fix this. Never had a problem with headsets.
But I've also been having some weird power problems - battery going down by 10%+ an hour. Mostly it turned out to be on days when I used wifi in the morning - I'm pretty sure using the new radio dialogue didn't actually switch off the wifi radio when you disconnected. 1.11 does fix that. But also sometimes switching off the phone didn't actually switch off that radio, and power would dissipate way too fast with nothing supposedly on. Doing a soft reset always allowed me to leave it over night and only see 1-2% power gone.
So I've just backed down to the original radio ROM from the original O2 installer. I'm hoping this will solve all my problems, at the cost of the less resilient changeovers from UMTS to GSM.
Ta,
Mark.
i think i have cracked this, my phone has now been connected to my ck3300 for 5 days solid now
here is the post on the parrot forum
http://www.parrot.biz/forums/english/viewtopic.php?id=813&p=4
its at the bottom
Paul
i think i have it pegged have another look at the parrot forum
ok here is yet another update on things.... this is a very strange one. if you enable the device lock start\settings\personal\lock
Prompt if device is unused for 16.7 hours
set simple pin
the phone and the parrot device keep there pairing with no problem at all i have been testing it for the last 48 hours
if you disable the above it loses the paring straght the way.
strange is they anyone else who can try this
Thanks
Paul
I'm using a Parrot R N B, but I have experience the same problem. I have also upgrade to the new radio version, and again the same problem. In fact I can't reproduce the error in a controlled way. It happens from time to time. But more of the time, the Universal connect again to the parrot only assigning again the Parrot as the headset in the Bluetooth manager.
My try now was to install the buzznet.dev cab attached. I'm trying also what buzz said: Do not use the power button to put the Universal off, only close the lid.
I'have 2 days without problems with the parrot. I'll post an update if this also fail.
what parrot do you have? i have a ck3300 running version 1.14d if you can try the above trick and let me know... i could reproduce the error ever time, just connect up 3-4 times and then it would fail..... have not had to worry about the power button trick.
Paul
Mine is RHYTHM N'BLUE, and with this last trick I told you, I add a new day without problems. Today I have started and stopped the Parrot 6 times and always work perfectly.
Hi,
My Wizard works fine except for one problem: when using it as a phone, the little top center speaker doesn't work; I hear nothing.
(no, changing the volume level doesn't help.)
I can now only use it as a phone by either activating the speaker phone function (which lets everone else around me hear what's being said), or use a bluetooth headset.
Both are not really convenient.
Is there any way to test the center speaker without first disassembling the whole thing? activate it with another program besides 'telephone'?
Maybe such a test shows the speaker itself is OK, so no disassembling needed (but what then...).
Any help is welcome.
Tovarim
System data:
OS 5.1.195 (buiold 15605.3.2.0)
ROM version 3.0.0.0 WWE
ROM date 6/7/06
Radio version 02.47.11
Protocol version 4.1.13.24
ExtRom 3.0.0.0 Molski.Biz
Simlock and CIDlock free.
It has also run the original and updates T-Mobile ROMS with the same problem: no center speaker.
Please check this thread http://forum.xda-developers.com/showthread.php?t=261573&page=2&highlight=wizard+headset+plug
Bluetooth switches off on our imate jasjam's we have at least 10 of them with this issue. When paired with a car kit they may receive a call through the kit then the next call through the device and when they check the device they find Bluetooth has turned off. To get it to re-enable they need to soft reset the device 3 times out of 5.
They are using 2 different brands of car kits.
After researching my bluetooth issues I found the 3518_09 fix for the imates bluetooth issues.
I have installed this patch on 6 or more imates and had mixed results. All of them were the latest official telstra jasjam rom. Some devices now have better connections to car kits with no bluetooth connection issues and a couple of them are now worse. The bluetooth radio switches off and then won't turn back on. If you reset the device then bluetooth will work again. Basically with or without this patch Bluetooth will switch off randomly on the imates. Some devices behaved better after the install and some worse. Frustrating.
Is anybody else having this issue?
Does Radio 1.41 help bluetooth issues at all?
Thanks
Radio 1.41 will not fix my bluetooth issues. I have read that much in the wiki
I also have this issue.
However it seems to be a problem either when I switch off the ignition with the phone in the car kit or remove / replace the phone on the car kit.
I didnt seem to have noticed an issue in the past month or so but since then its getting to be quite a pain. I have to go back into the comms manager and re-enable it most of the time.
I have an M3100
Operator Version 14.123.1.614
Rom Version 1.23.61.4
Rom Date 07/13/06
Radio Version 1.16.00.00
Protocol version 32.53.7018.01H
Thanks
Have updated my phone
Since running the latest Orange Updater file:
SPV_M3100_ROMUpdate_0407.exe from Orange website.
www.orange.co.uk/business/downloads/SPV_M3100_ROMUpdate_0407.exe
This updated the firmware to:
Operator Version 14.211.1.611
Rom Version 2.11.61.1
Rom Date 03/23/07
Radio Version 1.38.00.01
Protocol version 32.71.7020.12H
This seems to have fixed my bluetooth issues. Also the phone is running much faster.
thanks for the info. is it possible just to take the bluetooth drivers from one rom and use them in another? I see that the 3518_09.cab has a bluetooth driver in it (i assume that's what it is) so maybe that is one of the files to look for. any help?
I have extracted the files from the rom posted above. I am going to try replacing btagext.dll, bthuart.dll & serial_btur.dll.
Hi there to all of you from Italy.
since some months a strange thing happens to my qtek9000. what happens is that when I receive a call I hear nothing and to hear I have to put the call on speaker. After that, I can go back to the call turning off the speakers.
I really don't know what to do here.
I don't know if this issue was covered before. if so, please excuse me for it.
here's some of my qtek info:
rom 1.30.89 ITA
radio 1.09.00
protocol version 42.42.P8
extrom 1.30.177 ITA
let me know if you need some more info about this.
all the bests
Michael