I've got a O2 xda exec .... when i did a rom update the battery went flat on reboot and now its stuck on the O2 blue screen with some little red words on the top right of the screen. Could some one out there please help ? ive been looking for a fix for a couple of days now :-( so this is my last hope
Try the thread "For those who has struck at the splashscreen during rom updates"
I have used that mitty tools there and did a restoration of DOC.
Read that post ... the solution may be for u there..
CHeer up
Related
i have the o2 Xda exec and after upgrading my rom the device goes to the screen where it shows the rom info and just stucks there. i have tried going into bootloader mode and using the mtty prog i installed the rom again. the same thing happens. i tried all roms i could find. nothing! i even updated the bootloader from v1.00 to v1.01...
it just stucks there on that blue screen with the o2 where down at the corner with red letters is the rom info.
this has been going on for a month now. if someone knows anything please reply.
Have you considered putting an O2 ROM back on the device and seeing what it does with that installed - Mike
i have tried ALL roms that exist!!!!!!!! still the same **** happens
plz try to upgrade boot loader to 2.01, and try again.
mine is also O2 and can update any rom with boot loader 2.01
CostasCy85 said:
i have the o2 Xda exec and after upgrading my rom the device goes to the screen where it shows the rom info and just stucks there. i have tried going into bootloader mode and using the mtty prog i installed the rom again. the same thing happens. i tried all roms i could find. nothing! i even updated the bootloader from v1.00 to v1.01...
it just stucks there on that blue screen with the o2 where down at the corner with red letters is the rom info.
this has been going on for a month now. if someone knows anything please reply.
Click to expand...
Click to collapse
Is it unlocked?
My friend had this problem, it was on a Sim-locked phone..
After re-installing the original rom and unlocking the sim it upgraded happily and haven't had problem since!!
First off, howdy to everyone on the forums!
Alright, I flashed my AT&T 8125 with a super feature-packed wm6 rom andd everything was working perfectly. I got a little disenchanted with TouchFlo, so I downloaded a vanilla rom and tried to flash it again.
Bad mistake - at 99% the flashing process stopped and said something about "communication error." The 8125 was displaying a screen with a fading red bar, a fading green bar, and a fading blue bar with some numbers in the upper left (IPL 3.08 and SPL 3.08). Oh, and there's "RUU" displayed in the upper right. It will sit at this screen forever.
However, when I plug it into my computer with a mini usb cable, the phone just acts like an unrecognized usb device (I get the usb connected sound on the computer) and the phone starts blinking on and off, displaying the same screen as before.
How badly is this thing messed up? Is there any way to fix this? I hear tell of some "boot from mini-sd card" sorcery, but I have no idea.
I got almost the same problem...
Hi,
I got the same problem...after flashing to 100% it was stuck and has to take it off. And after that it comes on with three color bars and does not connects thru Active snyc....and every ROM unitluty says there is connection error.....
Any help from anyone....
Thnx!1
Hello,
same happened to me...and no ROM utility would work.
...except : the old WM5 "button" ROM that people use to downgrade.
you can start from there. Downgrade to that ROM, and if successfull, then you can reapply IPL/SPL upgrade, Radio upgrade, then the latest WM6 ROM of your choice.
The name of the "button" ROM I used, should you need to Google it :
"CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE"
Sylvain
If you'll read the stickies and stuck in bootloader thread it'll tell you how to fix.
witch1 said:
If you'll read the stickies and stuck in bootloader thread it'll tell you how to fix.
Click to expand...
Click to collapse
Forgive my ignorance, but I read the stickies and found nothing on the subject. Would you mind pointing me in the right direction?
I have the same problem
look this .ru solution http://pda2u.ru/forum/index.php?showtopic=348
the translation is here http://forum.xda-developers.com/showthread.php?t=306892&page=4
other post to solve the problem: http://forum.xda-developers.com/showthread.php?t=274766
have a lot to read, if you find another solution please post it
why have a solution in .ru from 17/06/08 and no in English ?
I see a black holes in the .ru translation and don't try it
Best regards
whonea said:
Forgive my ignorance, but I read the stickies and found nothing on the subject. Would you mind pointing me in the right direction?
Click to expand...
Click to collapse
Did you read the stickies in the Wizard Mobile 6 Board? Somehow that seems unlikely, if you're still lost.
hallow evryone...i am just a fresh user of WM and i got a i-mate k-jam g3 from ma elder bro... and i tried to upgrade it with WM6.5
but the stupidity that i did was.... i installed a charmer version in the wizard and now its stuck in the logo screen. :S
this is the rom that i installed:
http://forum.xda-developers.com/archive/index.php/t-502194.html
please guyz..help me out...
now that i cant run my wizard i cant connect with windows mobile device center and cant install new rom...
what should i do now??? how can i go back to my old WM5 ???
m really worried about the wizard...i was so happy to have that and now i messed evrything up...
please assist me how can i recover from this problem.....
thankuuuuuuu
try this
sunxray said:
hallow evryone...i am just a fresh user of WM and i got a i-mate k-jam g3 from ma elder bro... and i tried to upgrade it with WM6.5
but the stupidity that i did was.... i installed a charmer version in the wizard and now its stuck in the logo screen. :S
this is the rom that i installed:
http://forum.xda-developers.com/archive/index.php/t-502194.html
please guyz..help me out...
now that i cant run my wizard i cant connect with windows mobile device center and cant install new rom...
what should i do now??? how can i go back to my old WM5 ???
m really worried about the wizard...i was so happy to have that and now i messed evrything up...
please assist me how can i recover from this problem.....
thankuuuuuuu
Click to expand...
Click to collapse
can u see the bootlload mode??
is a coloured screen (varoius colors in horizontal bars)
if is possible then, flash again, with a wizard ROM now...
i hope you can fix it........
bro... its not the 4coloured screen...
its the screen written "IMATE" and its only blue...
and to flash with a new rom i need to sync my wizard with the PC... but my wizard is stuck in the one color (blue with the imate logo) screen...
To sync with your pc you must be at bootloader (tricolor) screen.
I took the following from the Wizard Wiki.
''To go to the 3 coloured bars , just press and hold the power button (top) + voicedial button(right top) keep it pressed and hit the soft reset hole (keep the other 2 buttons pressed until the 3 coloured bars come up)''.-
I recently bought a Qtek 9000 second hand. I flashed it a couple of times and all went well untill with the last flash it got stuck in the qtek splash screen showing the name of the rom and other info in red letters. Tried flashing it againt repeatedly but i still have the same problem.
Any help will be greatly appreciated.
Welcome to forums
Try to flash a diferent ROM
and have a deep read in the wiki:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck,
Thanks i tried flashing with tomal 8.5 ,8.7 and luca15thebig rom.
They installed successfully but im's still stuck in splash screen showing qtek. Did i bricked it for sure?
have you do DOC Format before flashing? if not, try it, hope it solve your problem.
http://wiki.xda-developers.com/index.php?pagename=DOC_Format
and ... you should try to search in this forum with key "stuck in splash screen" too.
my o2 xda exec dead after a failure rom update please help me i love this exec
i cant go to boot loader any more its looks like compleetly dead
when i press holding power and back light then reset a red light come and go no charging indication
is tee any moe short keys to enter the boot loader apart from this power and back light then reset . or any tools please help me out
have a look here
http://forum.xda-developers.com/showthread.php?t=549207
orb3000 said:
have a look here
http://forum.xda-developers.com/showthread.php?t=549207
Click to expand...
Click to collapse
some one please help
i cant find a solution for this problem there are soo many people like me waiting for a way to get fixed there exic
please help please
many people had same problem