I am having trouble getting online with WiFi. Under Connections I am using MediaNET, and I unchecked the proxy option, but it is still connecting through Cingular GPRS. Is there anything else I need to do to get Wifi to work correctly?
Go to the advanced tab in settings - connections.
Select "select networks" and replace "My ISP" by "My work network".
This way it will always connect via Wifi.
Cheers,
Drifter
connecting to secure networks
thanks!
i can connect to public networks, but how about my secure network at home? I can't seem to connect to it for some reason...where do I enter the WEP key etc (if i have to)?
Using WiFi - Since you referenced Media Net, I am assuming you have the Cingular ROM. Upgrade it.
Then wifi works a heck of a lot better. I got it to work once or twice with the Cingular ROM, but it was endless playing with settings til it worked - and it was still slow. With the iMate rom, you just disable the proxy and switch connections and it works perfectly every time.
Plus, the performance increase you get warrants the ROM upgrade.
ROM
where can i DL the new ROM?
I just bought the new T-Mobile (USA) MDA a couple days ago, a version of the HTC Wizard.
I have been able to connect with GPRS/EDGE, and seem to be getting EDGE speed, which is nice (my first EDGE phone).
However, no such luck with Wi-fi.
At my house, I can easily connect, at all times, with a few different wi-fi networks, with my wi-fi enabled laptop, and with my older PPC--an IPAQ 2210, with Spectec SDIO Wi-Fi card, can browse the web via Wi-Fi, etc.
The MDA does connect to Wi-FI, appears to be connected to it. (After turning it on in Connection Manager, of course.) But I cannot access any web sites with it. On trying to do so with PIE, I always get the error message:
"The page cannot be displayed or downloaded because the connection was lost, Check the connection and try again later."
I have not once been able to access one web site via Wi-Fi, with the MDA.
Can anyone help with this?
Thank you.
I ahve the same problem and have not figured out how to solve this...
Can anyone help us?
same problem here, also with t-mobile as provider. can it be a problem related to t-mobile???
me said:
I just bought the new T-Mobile (USA) MDA a couple days ago, a version of the HTC Wizard.
I have been able to connect with GPRS/EDGE, and seem to be getting EDGE speed, which is nice (my first EDGE phone).
However, no such luck with Wi-fi.
At my house, I can easily connect, at all times, with a few different wi-fi networks, with my wi-fi enabled laptop, and with my older PPC--an IPAQ 2210, with Spectec SDIO Wi-Fi card, can browse the web via Wi-Fi, etc.
The MDA does connect to Wi-FI, appears to be connected to it. (After turning it on in Connection Manager, of course.) But I cannot access any web sites with it. On trying to do so with PIE, I always get the error message:
"The page cannot be displayed or downloaded because the connection was lost, Check the connection and try again later."
I have not once been able to access one web site via Wi-Fi, with the MDA.
Can anyone help with this?
Thank you.
Click to expand...
Click to collapse
I have exactly the same problem
I guess you could try going under "Settings" "Connections" "Network Card" and make sure your network card is set to connect to "The Internet"
Select your wireless card and then make sure the drop down says "The Internet" and hit ok.
Also, make sure your GPRS Connection settings aren't setup to use T-Mobile's proxy. When your gprs is setup to use a proxy for web browsing, PIE will attempt to use the proxy with any connection. And by proxy, I'm not talking about an APN or anything.
Are you running security on your router? If so try shutting it off to test or try to connect to someone elses WiFi network to test.
wagz said:
I guess you could try going under "Settings" "Connections" "Network Card" and make sure your network card is set to connect to "The Internet"
Select your wireless card and then make sure the drop down says "The Internet" and hit ok.
Click to expand...
Click to collapse
I spoke with a TMob customer service rep about this a couple weeks ago, and this is basically what he told me to do. A T-Mobile HotSpot (Starbucks, etc) should work without making any changes. But if you want to use your own WiFi connection, you have to do the following:
Start Menu -> Settings -> Connections Tab -> Connections Icon
Select Advanced Tab -> Select Networks
Change first dropdown to "My Work Network".
Click OK, OK.
Then when you want to roam with GPRS/EDGE again, you have to change it back to "T-Mobile GPRS".
Very annoying to say the least. If anyone knows a better way to do this, I'd love to hear about it.
This works for me:
Start Menu -> Settings -> Connections Tab -> Connections Icon
Select Advanced Tab -> Select Networks
Change the first dropdown to My Work Network
Change the second dropdown to T-Mobile GPRS
Make sure My Work Network is set to connect to the internet, but has NO proxy settings.
Make sure T-Mobile GRPS is set to connect to the internet, but HAS proxy settings.
Magic!
frycow, you rock!!
That worked perfectly!! I hated that I had to keep switching networks whenever I wanted to go online via GPRS or wifi!!
Thanks!!!
frycow,
wow. that sounds great. but I can't get it working. could you take a couple minutes to walk me (and I'm sure others too) through your exact settings? especially the proxy settings.
thanks!
frycow is a freakin champ....that did the trick!! I've been WAITING to get this working!!
AHHHH, AND IT FINALLY GOT MY POCKET MSN TO START WORKING TOO!!!! Still doesn't work on GPRS, but it certainly works on Wi-Fi!! I suppose the last thing would be to get it working on both!! regardless, this is SWEET!!
I can´t get it working :evil:
When I Change the first dropdown to My Work Network and after that tryn to sync without having wifi enabled, the device does not connect with GPRS..., solutions...
frycow, hazchem, djswivel:
Could one of you help out Paltkugen and I? Both of us can't get it working. If you could let us know the specific settings, including the proxy settings, I would really appreciate it. Its so frustrating to know it works for some people, but not being able to get it going.
Thanks!
I did EXACTLY what fry posted....follow this carefully
Start Menu -> Settings -> Connections Tab -> Connections Icon
Select Advanced Tab -> Select Networks
Change the first dropdown to My Work Network
Change the second dropdown to T-Mobile GPRS
Click Edit on the My Work Network dropdown -> Proxy Settings Tab
Check the first box (This network connects to the internet), but NOT the second (This network uses a proxy server to connect to the internet)
Now do the same for the T-Mobile GRPS settins in the edit menu, only check both boxes this time. Then type in 216.155.165.50 as the proxy server. From there you should be good.
djswivel said:
I did EXACTLY what fry posted....follow this carefully
Start Menu -> Settings -> Connections Tab -> Connections Icon
Select Advanced Tab -> Select Networks
Change the first dropdown to My Work Network
Change the second dropdown to T-Mobile GPRS
Click Edit on the My Work Network dropdown -> Proxy Settings Tab
Check the first box (This network connects to the internet), but NOT the second (This network uses a proxy server to connect to the internet)
Now do the same for the T-Mobile GRPS settins in the edit menu, only check both boxes this time. Then type in 216.155.165.50 as the proxy server. From there you should be good.
Click to expand...
Click to collapse
That is exactly what I did too. Just tried it again and I can't use GPRS to surf. I have Wifi turned off. GPRS is not connected. I open PIE and go to some URL (google.com). GPRS starts connecting and successfully connects to T-Mobile GPRS.
Then, for about 30-60 seconds, the status bar says "Locating". Then an alert pops up that says "The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later."
Next, I turn on WiFi. It conects to my local WiFi network. It is still connected to T-Mobile GPRS too. I go back to PIE. As soon as I try to goto a URL, the GPRS connection drops, and again it says "Locating..." for a while. Then the same alert pops up again.
So now that GPRS isn't connected and just WiFi, I try going to the URL again. Same results.
Next I try turning off WiFi. Now there are no connections. I restart WiFi and there is just a WiFi connection. Same results in PIE.
I thought maybe the proxy is the problem, so I turned off the proxy in GPRS. When I do this, the checkbox "This network connects to the internet" won't stay checked. Even if I check it and click ok, when I go back it is unchecked. And when I did this, I couldn't even connect with GPRS. And with WiFi on, it would connect to Wifi, but going to a page would immediately pop up an alert that says "Cannot Connect with current connection settings. To change you connection settings, tap Settings."
I added the proxy back in and then tried changing the GPRS access point name from wap.voicestream.com to internet2.voicestream.com and internet3.voicestream.com. internet2 wouldn't even make a connection, but internet3 did. however, i still couldn't locate pages in PIE. So I changed it back to wap. I think my unlimited GPRS plan is configured the VPN way, so I remember having to use internet2 or internet3 in the past.
Could the proxy server not be working right for me? Is it possible that I cannot locate the proxy because I'm configured in a non-standard way (with a different access point - internet3) than most?
I think I'll call tmo and see if I can get changed to the regular AP (wap). I'm not using VPN stuff right now anyway. If anyone has other ideas, please let me know.
Thanks again!
I think i have a work around. but involes changing it back and forth when switching btwn wifi and gprs..
created two connections.
one with proxy and one without.
im only able to surf gprs with proxy.
when connecting via GPRS set both networks to connect to PROXY.
when using WiFi, set both networks to connect using NOPROXY.
that should work. at least it worked for me. tried only 2 pages and it loaded for both. GPRS used myvoicestream and wifi google.
yowzator said:
I have Wifi turned off. GPRS is not connected. I open PIE and go to some URL (google.com). GPRS starts connecting and successfully connects to T-Mobile GPRS.
Then, for about 30-60 seconds, the status bar says "Locating". Then an alert pops up that says "The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later."
Next, I turn on WiFi. It conects to my local WiFi network. It is still connected to T-Mobile GPRS too. I go back to PIE. As soon as I try to goto a URL, the GPRS connection drops, and again it says "Locating..." for a while. Then the same alert pops up again.
So now that GPRS isn't connected and just WiFi, I try going to the URL again. Same results.
Next I try turning off WiFi. Now there are no connections. I restart WiFi and there is just a WiFi connection. Same results in PIE.
I thought maybe the proxy is the problem, so I turned off the proxy in GPRS. When I do this, the checkbox "This network connects to the internet" won't stay checked. Even if I check it and click ok, when I go back it is unchecked. And when I did this, I couldn't even connect with GPRS. And with WiFi on, it would connect to Wifi, but going to a page would immediately pop up an alert that says "Cannot Connect with current connection settings. To change you connection settings, tap Settings."
I added the proxy back in and then tried changing the GPRS access point name from wap.voicestream.com to internet2.voicestream.com and internet3.voicestream.com. internet2 wouldn't even make a connection, but internet3 did. however, i still couldn't locate pages in PIE. So I changed it back to wap. I think my unlimited GPRS plan is configured the VPN way, so I remember having to use internet2 or internet3 in the past.
Click to expand...
Click to collapse
Earlier today I had been trying to get VM Net Browser or Resco File Explorer to work, and they *were* working, albeit very sporadically. Sometimes I could see whole windows network complete with shared files and directories, other times I could browse to my computer and it wouldn't show anything as being shared. Looking for a solution, i found this thread.
I followed the recommendations of the previous posts and got exactly the same results as yowzator, including the weird thing with the "This network connects to the internet" checkbox unchecking. My GPRS access point is also named wap.voicestream.com - not sure if that matters.
However, I know that I was having at least partial wi-fi success before trying this fix or I wouldn't be able to have seen my home network. So I gave up on this fix and put everything back to the default - GPRS for programs that automatically connect to the internet, no proxy, and My Work Network for programs that automatically connect toa private network, with "This network connects to the internet" unchecked because it's impossible to check it and expect it to stay checked.
I tried surfing around to a few pages with wifi only (connections shows me connected to my network, I turned off the phone icon in the comm settings, and tapping on the connectivity icon on the taskbar didn't have GPRS listed) and amazingly, some of them worked - though the "locating" process seemed to take a while, they sometimes seemed to load faster than with GPRS (especially if I let my MDA go to sleep and then turn it back on again).
And then they don't work again, without me doing anything. So I don't think the fix we've been trying is a true fix to the problem - if it was then then pages would *never* load with the proxy disabled. Right?
I've been wondering if the "modem" tab under My Work Network is supposed to be blank . . . even if it's using wifi it seems like a poor UI design to not have a checkbox or something saying "this connection is for wifi and not dialup".
I am using the 2.17 ROM update. My wireless router is a D-link DI-624 extreme g. I'm using WEP encryption.
I am crying . . . tears . . . of confusion.
SOLUTION!?
This works for me (suggested in another thread):
1. Add the following to the registry:
HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS:
DWORD dot11SupportedRateMaskG=8
(Note that there is already a key in the registry called "HKEY_LOCAL_MACHINE\COMM\TIACXWLN1\PARMS: DWORD dot11SupportedRateMask=1" - you should leave this alone)
2. Do a soft reset.
3. Go to your wi-fi settings -> Power Mode tab -> Best Performance (without this step it didn't work for me)
4. Turn on wi-fi and connect to anything in internet explorer. It should seem blazing fast compared to GPRS.
Note that this assumes you haven't done any of the fixes in this thread. That is to say, leave it with GPRS for programs that automatically connect to the internet (with no proxy), and My Work Network for programs that automatically connect to a private network, with "This network connects to the internet" unchecked because it's impossible to check it and expect it to stay checked.
So far (for a few minutes anyway) this is working for me! Even Resco File Explorer seems to mostly work - I can map my PC's shared folders and see my stuff reliably, as far as I can tell. VM Net Browser is still wonky though.
The thread this solution comes from is http://forum.xda-developers.com/viewtopic.php?t=38898&start=0&postdays=0&postorder=asc
Hi,
tried that solution
(I have a thread below)
still falls over on "locate".
I have no home network so I have never got anything working - connects fine on a public hotspot, but as I say, fails on locate.
I've had enough - may either phone T-mobile pay CS - something I really don't want to do out of principle - or just send teh phone back.
any new info on this? can seem to get it to work.
i have configures it many ways as suggested above. only time i was able to browse on wifi was with no proxie was set up. i connect through another network, (the mda automatically hooks you up to all avalible networks) but that only lasted a few minutes.
is there even a chance i could someone at tmobile even help me??? anyone here call them and get got service/help with getting it to work?
thanks
skot
I have a proxy setup to allow me to connect to T-mobile's internet. I noticed that when the proxy is enabled in connection settings, my wifi does not connect to websites. However, when I disable the proxy from my gprs connection wifi works fine.
Is this normal? Is it maybe a bug with the rom im using?
Normal.
...
I have searched everywhere and instead of starting another post on the same issue I will post on this one.
I have the same issue, and understand its normal. Is there a way around this because re typing in proxy settings just to go on gprs internet is a annoying and incovienent. I want to be able to go on wifi and have everything work fine. When I disconnect wifi I can then access the internet via gprs proxy.
AT&T included both an enable proxy cab and a disable proxy cab...
However Im in the process of moving and my main computer is down...
When I get it back up I'll pull those cabs off of the phone, perhaps they will work for tmobile..beats going into the connection settings...
After all of this I found a fix.
http://forum.xda-developers.com/showthread.php?t=309108
Someone should really sticky this because this helps so much especially since I like not having to pay for my T-mobile internet via the proxy. Now I dont have to delete the proxy. My activesync and wifi work flawlessly as well as GPRS Edge.
Please don't kill me but I want to know
HOW to make use WiFi instead of network on browsers and mail, once I connect?
once you connect you to a wifi network it should be just like using wifi on your computer.
a more specific question or example may allow someone to help you more.
The phone uses Wifi where possible by default. However as my push mail is running over the Vodafone Internet APN I have found some occasions where my browsing session wasn't using Wifi.
So I created my own homepage which tells me the IP address I'm on and works out if it's my wifi router or the Vodafone Internet. It also has all my bookmarks, which is a better than the built in solution from Opera.
If you aren't using the GPRS all day, try NoData which can block all GPRS usage.
artesea said:
The phone uses Wifi where possible by default. However as my push mail is running over the Vodafone Internet APN I have found some occasions where my browsing session wasn't using Wifi.
So I created my own homepage which tells me the IP address I'm on and works out if it's my wifi router or the Vodafone Internet. It also has all my bookmarks, which is a better than the built in solution from Opera.
If you aren't using the GPRS all day, try NoData which can block all GPRS usage.
Click to expand...
Click to collapse
Aha, the old friend from MySymbian
Well I'll try that NoData but good to hear X1 wants to use it by default (when connected). I don't use any push messages.
It's a Vodafone ROM thing. if you flash to another ROM it will work fine.
WiFi problem
No man, I have a Vodafone UK Xperia. problem with Wifi initially, then I've ROM it to the generic UK version...now it connects to Wifi but I cannot browse anything with it. The pages don't load and status keeps saying 'loading...' but nothing happens and after a min or so, a message saying that I have to check my internet connection...not connected!
OoLoLo said:
No man, I have a Vodafone UK Xperia. problem with Wifi initially, then I've ROM it to the generic UK version...now it connects to Wifi but I cannot browse anything with it. The pages don't load and status keeps saying 'loading...' but nothing happens and after a min or so, a message saying that I have to check my internet connection...not connected!
Click to expand...
Click to collapse
Then you have your Wifi settings incorrect.
How come u say my Wifi settings are incorrect? How can I correct it? In wat way? my laptop etc connects to the Wifi fine...and the phone as well...but it just that the phone doesnt seem to load anything from internet when I'm connected.
First Check if you used the correct Key for your wifi if thats fine then ....
I've never had this problem with the xperia but I have had with other windows mobile phones it was probable because of older versions of windows mobile, if wifi is connected fine go to Settings -> Connections Tab -> Connections -> Advanced Tab -> Select Networks, then select My Network for both drop downs.
OoLoLo said:
How come u say my Wifi settings are incorrect? How can I correct it? In wat way? my laptop etc connects to the Wifi fine...and the phone as well...but it just that the phone doesnt seem to load anything from internet when I'm connected.
Click to expand...
Click to collapse
Because you are unable to surf the internet, which points to either the settings entered incorrectly (normally when using WEP) or your router needs a firmware upgrade.
Ok here's a complete answer to my question
HOW to make X1 to connect to WiFi ONLY:
Install NoData (thanks for tip!!!)
Turn this on to NOT transfer any network data.
All the browsers I tried (Opera Mini 4.2, Opera Mobile 9.5)
automatically connect by WiFi, so it's great.
Email NOT. But it's enough to
go to email account settings and in advanced server settings instead of your providers network
choose "The Internet".
Violaa, the email account also connects through WiFi.
Hope that helps somebody
Where do i get no data please
There's one topic here called no data cab file!!
Just find it and it's there!
i got problems with my fritzbox 7270, too.
but i solved it.
just set the 802 adaptor manual to your wifi settings.
free ip adress in your segment, gateway, nameserver.
i think its a dhcp problem, with my 7270.
email doesnt work using data connection, only wlan...how to fix that or you cant fix that?
yep. have had the same issues.. even weirder is that the internet does work but not mail.. not sure if restarting might help, I gave up.
Everything works for me too, just email doesnt update itself when I press receive and send, not even data connection is established.
I have same problem with live msn, but there at least connection establish itself, but then I get connection error...
Everything else using data connection works...
I've found exactly the same thing - some applications only seem able to access the internet when my HD2 is plugged in to my PC or using wifi.
make sure in settings/all settings/connections/connestions under your proxy settings you do NOT use the "connect using proxy server"
My phone provider uses proxy, in manual setting is written you should select this option...if i set it off...everything will work or settings there will be deleted and i will have problems with internet connection then...?
For my provider (Vodafone) the written instructions are to use proxy also, however without it all is working-class perfect, mail AND internet. just try it. At the customerservice they told me that for the high-speed connections as the HD requires the standard settings simply aren't correct.
i had exactly the same problem and i figured out that it was because the opera / connection registry tweaks ive found in "Leo Hints&Tips" thread... Reverted everything to original values and it worked for me ...
I dont use any tweaks except bsb tweak and email didnt work before i had bsb tweaks...
I have almost the same issue... Everything works over the data connection except Remote Desktop.
Proxy disabled btw. What gives?
Grtz
Lukas