Hi everyone,
Apologies if this is covered somewhere and I've missed it, but I'm in a bit of a pickle here.
After running Registry Wizard for the first time, I suddenly have no Data Access. I didn't change anything to do with the GPRS network, but I'm getting the "Cannot connect with current connection settings" error. Upon checking the Comm Manager, the Data Access icon isn't even an option.
I'm running an MDA G3 with the latest official update from T-Mobile's website. I've been thinking about going to WM6 and if a hard reset is required, I might as well.
Thanks in advance and sorry if this is an RTFM question.
Jason
same issue here and no data access after wm6 upgrade. I have been traveling across country and they told me i had the wrong plan (t zones) made some backend change and it works.. however with registry wizard i restored after using it and it worked fine - it DEFINITELY does something with the latest tmo rom that kills data access, unfortunately i was in a crunch and had no time ti figure out what that was - turning everthing off didn't repair it either - i ended up having to reset.
Problems
my settings were working fine, then I made some changes yesterday and no data access, tried everything, numerous soft resets, then 2 hard resets, eventually I did no reinstall Registry Wizard and everything is fine.
Well, I ended up needing a refresh from T-Mobile. It's working fine now. The tech I talked to was super cool. She said they were NOT going to update the MDA to WM6 and that she had "already done it herself" a few weeks ago.
So, at least I didn't have to hide anything.
Speaking of, where in WM6 do I need to enter the data for the MMS server?
Related
I have a JasJar and when I switch sims the mailboxes keep disappearing. I still see them in the TODAY screen but when I try to select them they are nowhere to be found. I also try to manually go to messaging but they are missing from there too. I keep creating new boxes and they are starting to number up Yahoo1, Yahoo2 etc.
Help Me.
Thanks.
Yeah i have experienced the same thing, whats seems to work for me is making sure you close down all apps before a soft reset or sim card change, go to start settings system memory running program list and stop all
This works for me every time now and i no longer have to set up my mail accounts
All you need to do is to turn off your device off for a while (a couple of seconds will do) before you reset.
It's because WM5 caches data to speed up the device a bit, and if you reset your device before it gets a chance to permanently write the data, it gets lost.
Best thing is to shut off before you do a reset, in case you lose data.
Well I sent mine to service, switched the mainboard and i can soft reset at anytime now, never looses any data any more.
Same Rom and config but the problem is completly gone
bosjo said:
Well I sent mine to service, switched the mainboard and i can soft reset at anytime now, never looses any data any more.
Same Rom and config but the problem is completly gone
Click to expand...
Click to collapse
Which Universal device did you have exactly?
I have a Qtek 9000 that seems to be forgetting its authentications and I can't figure it out. Nothing else seems to be wrong with it which leads me to think it HAS to be a software issue, but I can't pin it down!
The only weird things I'm experiencing: Bluetooth devices lose pairing (device redetects them and asks for PIN), Wi-Fi access points get wiped clean (get prompted for WPA keys), and infrequently the Exchange Server password in ActiveSync and the GPRS login information to Cingular are asked even when "Save password" is set.
Qtek 9000 from Dangaard Norway
Min wiped Email settings, Wlan, and some GPRS settings
Don't know about BT, dident use it before i sent it back.
Thanks Bosjo, I was beginning to think I was the only one, or that it was a software issue.
I believe it's related to the fact that the IMEI temporarily disappears from the phone, so it loses authentication of itself and therefore the devices or credentials its encrypted with.
I posted full details here http://www.howardforums.com/showthread.php?t=797931 and will likely be shipping it back to the supplier tomorrow for replacement.
That's true, I totally forgot about the Imei disapering.
It also failed to display the radio version.
I know for sure that they actually switched the mainboard cause I have a different MAC adress, haven't checked the Imei number though.
It's a bit funny that this is a hardware error, one would think that it should forgett all settings then and not just pieces off it
Got the same problem. Im seeing my mail account on the today screen but can't access it, if i search for the e-mail's i can find them but can't access them. Anyone find a workaround or where can i delete my mail account i had before it dissapred, becuase now if i try to add the mail account again with the same name as last time it says that i alredy got a account but i can't edit it :/... Please help
damn, nobody found a solution for this? search thru the registry twice without a result ;/
does this happen only when you take off the battery?
another one ....
any solution for it....
regards
ady: nah when i do a soft reset
can't find it in somewhere in the registry either so don't know how i could remove this damn buggy thing :/
Hi Gang:
I have recently been trying to solve a puzzling issue that I was experiencing with my 8125, and I wanted to share the problem and (partial) solution with everyone in case this ever crops up again. I did pretty extensive searches here (and elsewhere), and could not find a single case of this problem happening to someone else. I tried every combination of search terms that I could think of...
Description: 8125 Freezing or Slow Down Upon Attempted Access of Phone Settings or other settings icons
Background: My (heavily-customized/optimized) 8125 had been stable for weeks, with no significant "upgrades" for over a month. Then I upgraded to MS VC 1.6. A few days after this upgrade, my phone got quite wonky (e.g. alarm going off non-stop, etc.) due to the notification queue getting clogged. I don't know if this is the fault of MS VC or not, though. Thanks to Memmaid & CheckNotifications, I cleared out the queue. At this time the phone appeared to be functioning normally.
A few days later, I tried to access the phone settings to manually select the network provider (traveling internationally). However, regardless of which route I would take to access the phone settings, the phone would freeze, quit responding, or greatly slow down. A soft reset was necessary to "un-freeze" the phone. Also, even if I tried to access other icons (e.g. Sounds & Notifications, when clicking on the Notification tab) under Start/Settings, the phone would quit responding.
Corrective Steps:
I initially worked the smartphone support folks in my employer's IT dept & Cingular tech support. Neither group was aware of this being a regular problem with the 8125.
1. Multiple soft resets – no help
2. Multiple hard resets – no help
3. Cingular replaced my 8125 – no help
4. Multiple hard resets of phone #2 – no help
5. Got a new SIM card – no help, but met a new Cingular tech
6. Hard reset** of new phone + new SIM card = OK
** Everything working OK now, with this "special" hard reset. During the setup procedure, I skipped the password setting screen, then let the phone unpack the ROM. In all previous attempts, I had enabled this password during setup (company policy, can't sync to Exchange server w/o it). According to the new Cingular tech that I met while getting my new SIM card, having this password set before the ROM is unpacked can "corrupt" the ROM unpacking. I don't know how true this last point is, but it sounded reasonable -- and it worked.
Next, I synced the phone (via USB) – guess what? The problem was back! Sooo, another hard reset and I decided to sync via EDGE first (i.e. email,calendar,contacts,& tasks only). The phone was still working!
After inspecting the ActiveSync settings on my PC, I noticed that I was not only sync'ing the 4 items above (from the Exchange server), but also "Notes" from my PC. This had to be the problem, so I disabled the sync'ing of Notes.
THE PHONE STILL WORKED AFTER A USB SYNC!!
Apparently there was some conflict related to the sync'ing of notes that was corrupting a key system file on the phone. Not sure what the root cause was, but by disabling the Notes sync the phone is working great again. I know this was a bit long-winded, but hopefully it will help someone in the future.
Of course, if someone has any ideas about how I might be able to reliably sync notes again, I would love to hear 'em. For now, I am doing without.
regards,
bg
Hey thanks a lot for the info. I have been havng a lot of problems with my 8125 so hopefully this will help.
I have used my x1 for four months in America with T-mobile. The phone had no problem until yesterday. However, yesterday, the phone began to lose signal and automatically rebooted several times. Then, finally, from the afternoon, the phone totally lost the signal, and kept looking the signal.
I took out my sim card and plugged into another cell phone and it worked. So, I thought it was the problem of the rom. (I was using Touch-IT 4.5) I downloaded the new version of the rom, Touch-IT 5.6, then flashed it. However, it did not solve the problem. So, I flashed with the original SE rom. However, the phone didn't work either.
I contacted T-mobile, and there was not problem on the signal on my region. I thought it might the problem of data plan since I do not use data plan. So I used Advanced config and killed every option for data plan. However, it still does not work. I tried to do settings manually. changing band, carrier, and every possible options, but it does not work.
Interestingly, the phone worked two times today for a short amount of the time. However, after the reset, it is gone. Other than phone function, I do not see any problem.
Even now the phone keeps searching the signal. What can I do? I read another article that is similar to my case, and they say even after changing the sim card, it does not work.
Anyone has the same issue? What can I do? My phone is dead for two days, and it messes up so many things. Please somebody help me.
Have you tried redoing the connection setup?
try clicking on signal antenna then enter settings click on network and manual select your network, will take a few mins to find networks if it connects manualy just select auto again and hopefully it will fix it., worked with mine.
Thank you guys
Thank you guys. Yes, I have tried both of them, but it still does not work.
In Connection setup, I chose United States and T-mobile, and the screen to choose between T-mobile and At&t. I select T-mobile, and click Register. Then, it goes to the searching mode again, and nothing happens.
I assume that somehow, the phone finds networks, since it does show the options to choose (T-mobile, At&t). But something is not right, and it messes the set up. I do not know why.
Hi,
I just came back from a 4 days trip to Rome, and I've not been able to connect to data even once.
Tests were done with all of the available operators in both 3g and 2g. I called my operator who confirmed I'm connected and that it's all open for data. Tried downloading weather, activesync, browser, emails, etc. I also tried to re-install the parameters, using the automatic HTC configuration.
Everything went again fine as soon as I landed back in my country.
What can be the problem? I'm really short of clue. I just regret not having tried a hard reset...
Thanks
Best guess is that you somehow had the wrong APN?
Could be, but:
-the apn I used was the one automatically installed by the Connection Setup' tool.
-the apn works fine in my country, and it is supposed to work the same in roaming.
Apologies if this has been posted before, I have tried to find topics similar, but have found no resolution thus far.
My X10's data was working perfectly, then about 2 weeks ago, market stopped working at "Starting Download" never completed, and I couldn't download Apps! This suddenly fixed itself one night randomly, and all my apps downloaded and installed, but instantly the market problem continued when I tried to use it again!
Now, the 3G/2G connection is totally non existent, there is NO icon at the top.. I have tried restarting the phone, turning it off and on, sim and battery out, even calling O2 to get correct APN settings (Server field is black, is this right?) and I got no "green light" beside "mms" at the APN type field..
The signal was fantastic before, and my family are still getting 3G connection on their phones, so I ahve no idea what the problem is.. I installed a few battery saving things which Iv since uninstalled.. but i have no clue what to do!
Any help would be much appreciated.. Thankyou!
suggest backing up your apps and then doing a factory data reset.. it's a pain in the proverbials but worked for me when this happened a couple of months ago.
How do I go about doing this mate? Any easy way?
Hi - Before you do this.. Can I just check something.. have you check in your network settings that it's not switched off... settings; wireless controls; mobile networks; MMS and data (needs to be on!).. and network mode - best to have it on GSM/ WCDMA Preferred to make sure... otherwise.... to answer your question above..
That will depend on whether you've already downloaded a file/ app manager such as ASTRO which will allow you to back up the apps.... if not you'll just have to make a note of which ones you want to reinstall and re load them after you've reset the phone.. the reset is done in the settings menu - sd card and phone storage - factory data reset... it will reset your phone back to how is was when you first got it though..