Related
All started with trying to upgrade(rewrite) the GSM part because the Hermes had problems with phone part - when trying to call - the phone stop responding, bus the pda part sill worked.
So - I tried and tried and tried again, reading many threads about HARD SPL,Flashing radio, etc. Nothing worked..
In the end "i managed" to kill GSM - phone had "No Gsm" on boot-up.
From there i tried to downgrade SPL to 1.04 so that i try to "raw" rewrite the GSM part.
But something went terribly wrong, and while downgrading SPL, the phone suddently shutdown and never opened again.
Now i have the folowing situation: NO BOOTLOADER, no usb conectivity, nothing
This means that i cannot connect via USB whatever i try.
Is there any hope for me? or is it TOTALLY BRICKED?
Any help is apreciated!! I can even dismantle the mobile if there is any way to flash it via some kind of jtag connection...anything ...
The folks at www.imei-check.com can do the JTAG flashing. Just email them. It would be costly for you to do it yourself...
Are you saying that the phone won't turn on at all or that it does but you can't get a bootloader screen?
Have you tried taking the battery out for a while? Have you tried flashing an OEM rom and radio compatible with your device off an SD card?
All of this info is in the wiki, as are OEM roms you can flash.
Let us know how you get on.
Good luck.
WB
Try this:
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber
5.) Soft Reset
@wacky.banana: The phone is totaly dead: no bootloader, doesn't boot at all, doesn't seem to have any USB conectivity at all. Flashing from micro sd doesn't work : probably because the bootloader isn't working.
@drummer10630: i'll check with imei-chek about jtag flashing, especially the price and shiping costs.thanks
@markafreeman: I tried, but when i put the battery in, the red light goes off, not to amber . no soft or hard reset helps. not even leaving the battery out for 2 weeks - i had tried that too . thanks anyway.
Anything else I can try? - phone totaly dead, no bootloder, no usb conectivity - cannot use mtty, cannot flash from microsd
I had to get a replacement device at that point when it happened to me.
Maybe someone else know a way to get it working.
Good luck.
get onto orange
tell them you dropped the phone
and it crashed and wouldnt turn on
so you managed to hard reset it
and it crashed an ****ed up
they'll replace it
well they will send it to HTC
who just replace the handset rather than repair it
Hi dancameo2k , maybe you will not remember but plz:
I ve bought recenty an spv m3100, im effortless trying to flash the rom to an wm6 version.
Like you ive started with the hardsppl flash thing to prevent bricking it and prior to sd flashing... and im not sure if its workin...
plz can you explain in detail how did you bricked it??? thx!!!!
the rom you used to flash was an american version or european one???
I have read and read and read. I have "bricked" my phone in the past and fixed it. I have used, tested, and flashed many roms from this site (Thanks to all cooks for their work!) but I still consider myself somewhat 'new' to troubleshooting.
I woke up this morning to make some important phone calls today and as luck would have it, my phone was stalled again. It's been doing that for a few weeks now. My last flash was Open Touch 5.0 UL I believe (either that or 5.2 biggy) and it has been working great except for the occasional freeze.
EDIT: Forgot to add, the actual problem is now it won't boot up after it froze this morning. Just sits at the boot screen
So I've tried my other methods of fixing it... /edit
Except this morning nothing is working. I have tried flashing with Orig. T-mobile ruu, tried SD flashing with the RUU_signed.nbh, tried restarting the computer, phone, removing battery and sim... NOTHING! When trying the sd flash (which I've never done before today, it reads and tells me to push the down button but then goes to bootloader screen and just sits there. With the RUU I'm getting err 300 but I'm using the SAME RUU (4.10...) that I've used in the past to reflash my phone AND tried the new one (4.26...)
Possible problem: Does it matter what kind of usb cable you use? I don't have the normal one I use as I am not home but I figured usb is usb...
I've read about it being a motherboard issue, how common is this?
I've read somethings about MTTY, would this apply to me??
Please help, anyone who has any suggestion, I'll try it!!
Stats:
IPL 4.10.0002
SPL 4.10.0000
NOT hard-spl'd
Wing w/ Open Touch Project 5.0 or 5.2
actualy the sd method needs hard spl thats all i can really provide
I appretiate it, that I did not know... I could barely find anything on how to do it even.
im having the same problem bt instead of freezing da screen jus goes different colors or jus goes gray and stays der
Thats basically what mine did. The colors would get messed up and no matter what button i pressed it would not do anything. My advice to you edrift, is BACK UP YOUR STUFF NOW and reflash it asap if you can still reboot. I can get into my phone at all now.
yea i tink i might jus throw my phone away.dis is jus gettin rediculous
hi there, it seems that im missing my image version SPL-1.28.0000 for the original rom for polaris.
is there any way to get the same image version? cz im stuck into the bootloader screen and tried to flash original rom 1.28.415.2 it flashed 100% but went back to bootload!!
am i missing something?
when flashing and the update tell that its gonna replace ur old image with the new one, for my devise it doesnt show any old image ... its just put the new one that will be upgraded to.
i know that it seems confusing thats why im asking !!! plz help ... its my second day stuck in the bootload screen with no help
i managed to catch what it is saying b4 bootload screen (only when SD card is in place) it says no image file was found!!! in a very fast way and go to bootloader. in case the sd is not in place nothing happens and it goes straight to the bootloader
Try this...
http://forum.xda-developers.com/showthread.php?t=425922
edit...:Sorry i see you know the thread
I have had a similar prob and and try mtty and problem are gone
and have you hard spl flashed before you flashed any other roms..??
Good Luck
thanx, yeah i did almost everything
the bootload stucking happened alone without me doing anything b4, i just left the phone as always and came back to find it stuck. so first i unplugged the battery and softreset and tried to hard reset but nothing happened.
second i searched the foum and i tried the solution in the thread u gave and no errors poped-up and i thought thats it but it wasnt and the devise restarted to bootload.
then i tried to load the original rom b4 unlocking (hard spl) cz i thought that its is the original so why do i need to unlock my device .... something went wrong cz active sync didnt work ... so i went to hard spl and couldnt make it anymore .... when hard spl process is launched it give error 262 i think.
but now the original rom that i spoke about earlier is processing to 100% but with no effect ...
hope im clear ... what do u think?
Hello,
I searched the internet for about 2 hours and couldn't find a solution, thats the reason why im opening this thread, im stuck.
Before i did following steps, the phone wouldt boot into winmo, it was constantly rebooting.
So i tried to flash a new rom.
It was really difficult to flash the phone because i couldnt use hspl it froze every time i tried, so i got uspl working after a few attempts. I flashed this rom:
http://forum.xda-developers.com/showthread.php?t=671277
after sucesfully flashing i turned the phone on, same issue, it got stuck in a boot loop.
So i decided to get the phone fully charged again an leave it for like an hour, after the break i restarted it and it worked nicely. So it was time to get the sd card in the slot and the sim, so i did a quick restart... but since then im having the same issues again, stuck in a boot loop, no matter what i do, even if i take out all the cards still happens. I tried to wait and charge, but no sucess...
i have no idea why the phone isnt starting winmo, but it drives me creazy...
32MB
SPL 1.54
anyone have any ideas, had same problems? Looking forward to hear from you.
Thanks in advance
________________________________
Found the problem, the battery connector seems to be broken, as long as i push against the battery the phone works nicely. unfortunatly this means good bye.
hi,
it´s the same problem for me. tryed different hardspl, uspl but no change.
ist restarts sometime direct after the bootloader and sometime it starts normaly and then restart.
i´ve changed the battery but it don´t solve the problem.
any suggestions?
ANybody can help me . i have a HD2 When tried to FLASH to any RADIO from 2.07 to 2.15 all failed at 96%. I have made a TASK29 also it fails at 96%. NOW cant install anything on it !
At first 2.15 flashed and after i made task29 it stop to install. Then i used 2.07 it flash, but again i used TASK29 and now when i retry to reinstall any RADIO, it fails at 96%.
Am using tasks29 because my HD2 is stuck in LOGO HTC. So am trying many ROM file for it to WORK but in VAIN !! I still can enter BOOTLOADER. Manage to install MAGLDR and WIN7 but never the phone was OK!
I was wondering if its a HARDWARE problem?
It usually takes a long time at 96%. Try leaving it for a while and see if it will complete. Mine took some time at 95%
Crust2 said:
It usually takes a long time at 96%. Try leaving it for a while and see if it will complete. Mine took some time at 95%
Click to expand...
Click to collapse
Yep, mine hangs at 96% too. Maybe try this Task29 with Radio (check it's the right radio though)...
http://forum.xda-developers.com/showthread.php?t=1018427
If you can get into BL dont worry you'll be able to flash. Just try everything again and give loader a moment.
Ok. I waited almost 30Mins ! is that ENOUGH?
But i Found that If i flash with this ROM (that has RADIO in it) - " Duttys_Leo_Sense_2.5_5.2.21907.5.0.93_1.80_ML_V4_Ship_EN " flash succESSfully but still i have the PROblEM of STUCK on HTC logo !
Again failed at 96%
Hello,
has anyone managed to resolve this problem?
I am having the same issue - radio and rom flash fails at 96%, I have tried even older radios and different roms with radio. Tried with HSPL 3.03 and 2.08.
When flashing from USB it always stops at 96% at hangs for 15mins then says fail.
If flashing from SD card then it just hangs indefinetely.
only the Duttys_Leo_Sense finishes flashes but the phone wont boot
Download this, flash it and and start from scratch. something went wrong along the way..but start from scratch and go again.
If you have trouble once you download. restart the phone holding the the power and volume down buttons. and you will get into bootloader..then connect phone and wait until it says usb and flash.
http://dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo2
toreone said:
Download this, flash it and and start from scratch. something went wrong along the way..but start from scratch and go again.
If you have trouble once you download. restart the phone holding the the power and volume down buttons. and you will get into bootloader..then connect phone and wait until it says usb and flash.
http://dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo2
Click to expand...
Click to collapse
Thanks - and a quick question - is this download for US or EU version?
I have a EU version.
nitko666 said:
Thanks - and a quick question - is this download for US or EU version?
I have a EU version.
Click to expand...
Click to collapse
I have not looked to see if it is for the US or EU HD2. But seeing as you have a EU HD2 you have nothing to fear really as the EU can be flashed with any radio version with no bad effects. But the US HD2 can not be flashed with any radio version with a 51 in it or it will be hard bricked. The 51 radio versions were the first radio versions for the EU HD2.
also, try chillign teh phone for twenty mins in teh freezer, then quickly reinsert the sd and try to flash. It may help you get past the last few %
Unfortunately it didnt end well
HTC HD ROM update from USB stalled at 8% for more than 30mins.
Then I tried updating it from SD card when it failed instantly reverting to factory SPL.
And then I tried to use HSPL4 to put: SPL-208 instead of HSPL208. Phone said cracked it and after that it died.
Its completely bricked now, cannot turn it on - no key lights, no lcd
odd, these devices are very difficult to brick since if you mess up, just go into bootloader mode and reflash.
slybunda said:
odd, these devices are very difficult to brick since if you mess up, just go into bootloader mode and reflash.
Click to expand...
Click to collapse
ahhh if only it was that simple. Check out the title of this thread, what you're suggesting is exactly what is failing. Look around, teh forum is stuffed full of this type of error. Sometimes it is solvable, sometimes not.
Hello, sorry for saying this but there is no solution to fix that. I had the same problem on friends HD2. It died with no reason, just rebooted. All you wrote is the same there, if you use newer radio stuck on 96%, older stuck in 97%. HSPL working ok, leoimg.nbh stuck on 8% and you getting ROM Update fail all times. That is hardware issuse and Radio ROM chip is damaged. We did not found any solution to fix that and even tryed xtc clip and all methods of instalation...
can u try flash HSPL first then the radio and then MGLDR...my problem is solve..
Hi.
I bought Hd2 yesterday, and I have a biiiig problem with it. It started perfectly - but after 5 min it shut down. It shows message about low battery, so I connected it into charger, orange led turned on. I tried to switch telephone on, but it freezes on white screen with HTC written. I tried soft-resets and hard-resets, even tried to install official rom - but installer is always freezing at 8%. I can get into BootLoader and phone is recognized by the PC after connecting USB cable. But this is all - i can't switch phone on, I can't install ROM...
What is wrong? Is it gonna work, or maybe it is totally bricked?
Radio flash stuck @ 96%
This seems to be the kiss of death for an HD2. I also have the same symptoms: stuck at 96% when trying to flash a radio. I have a US HD2 and I've flashed about 10 of these phones with no issues. This is the first one I've ever seen with this issue though. It was a friends phone that he wanted me to assemble. He gave it to me in pieces. When I assembled it, it wouldn't boot. So I flashed the stock ROM, but the flash won't complete. Fails at 8% or 11%. Tried flashing HSPL and it seems to work. But when trying to flash the radio it fails at 96% (it just hangs).
I was wondering if it has bad sectors on the partition or someting and if a J-tag service could fix this. Theoretically, it's supposed to be fixable if you can get into the bootloader. Oh well, into the junk box this HD2 motherboard goes until someone posts a fix.
I got the same problem can't not flash anything, and alway stucked at 96%.
Only thing I did to get it complete flashing radio, rom was put the phone in zip lock, and put in freezer for 10mins, took it out and plug in battery and flashing, at anytime, if the phone vibrating it will not accepting any data in, and it will stop at 96% and then i have to put in freezer again. Took me awhile to get everything boot up and got in windows 7 and play with it. But... the phone still rebooting it self, sometimes it will reboot after 5 mins or an hr when I am surfing webs or setting up the phone... Right now I am trying to get a different sim card to test out.
Seem more like hardware problem.
My problem is solved - I've got new motherboard....
NAND Toolkit
Have you guys tried to use NAND Toolkit?! it works fine for me, and never had issues flashing my HD2...