Hi all,
I installed xpcuscalar v2.93 on my k-jam but it just won't start. I would like to know if there's anyone has got it running on a wizard.
thanks
A
Not likely
the Wizards' CPU is a TI OMAP and not an xScale processor...
Arnon
But it's supposed to work on the magician isn't it?
Hmmmm
IIRC Magician IS xscale so it should run fine on there, Wizard (k-jam O2 XDA mini-s or pro, etc) is a different processor technology so its all different
Ah, I see. Thanks.
Is there any way to overclock the cpu of the k-jam?
Thanks
As yet. no
But i have seen on here that it is a work in progress so keep an eye on the forums for a couple of months and maybe there will be soon
Thanks
I'm thinking of buying the Prophet but have been told the device is a bit slow. How is the speed of the Prophet in comparison to the Wizard? as i think Wizard runs at a good speed.
Never used a Wizard so I can't do that comparison.
But I can tell you the Prophet is SLOW. IMO, overclocking is absolutely necessary.
I have not used the Wizard either, but had the Jam until I got the M600 and I have to disagree with the previous poster. I use the Jamin for Tomtom and PIM alot, but have only used WMP a bit, however it played movies I encoded for the Jam just fine.
I have found the M600 to be very responsive and not had any speed issues. However if you want to use if for Skype (I don't) then you would come across problems without overclocking. For myself and what I use the M600 for, it is just great.
BONJOUR
J UTILISE LE PROPHET APRES DE MULTIPLE PDA DELL X30 IPAQ 2210 ET TUNGSTEN T3 ET BIEN MEME S IL EST MOINS RAPIDE IL PERMET D EMPLOYE LA PLUPARS DES SOFT SANS OVERCLOCKING
POUR MA PAR J AI UTILISE OMAPCLOCK JUSTE POUR TOMTOM
@ Nico1970
I do not mean to be rude, buddy, but where did you get the hint from that this is a french speaking forum ?
We all try our best to write in english, despite our nationality. And our knowledge of the english language !
Oh! One last thing: writing CAPITAL LETTERS means screaming...
Happy posting.
I run my prophet at 240MHz and it's much more responsive now than before it was overclocked.
For what you need - and how, search the forum for omapclock and MemMaid.
digger said:
I have not used the Wizard either, but had the Jam until I got the M600 and I have to disagree with the previous poster. I use the Jamin for Tomtom and PIM alot, but have only used WMP a bit, however it played movies I encoded for the Jam just fine.
I have found the M600 to be very responsive and not had any speed issues. However if you want to use if for Skype (I don't) then you would come across problems without overclocking. For myself and what I use the M600 for, it is just great.
Click to expand...
Click to collapse
Just to be clear, you mean JAMin or JAM. They are different phone. JAMin is a Prophet and JAM is a Magician.
Anyway, I'm using a Charmer now, which is very similar to a Prophet, microprocessor and OS wise. I have no problem running Tomtom, and many other applications. I even tried to encode and played an entire Friends episode on my phone and it works very well.
However, there are some other programs that I find it to be slow. E.g. I tried those NES (or some other) emulator that load the games from ROM files (not the ROM of the phone).
Then, I also find that in normal usage, if I were not to softreset the phone once every 2-3 days, the phone will respond VERY slowly. Which, I'm not sure if that's the WM5 problem or the phone.
Anyway, I've done some benchmarking of the Charmer (same processor as Prophet) with the older Magician, and the result shows that the Charmer is a terrible device as compare to Magician in terms of speed.
http://forum.xda-developers.com/viewtopic.php?t=53084&start=100
However, as according to the posts here
http://forum.xda-developers.com/viewtopic.php?t=55153&highlight=
It seems that the Chamer has almost twice the duration in terms of battery life as compared to the Magician. So, that is a gain for using slow processor.
It would be good if someone with a Prophet and Wizard to run the same benchmarking. Or someone send me a Wizard to run the benchmark?
Ok, to clarify as I have inadvertantly referenced both the M600 and Jamin. I now have the M600 (same as Jamin) which I run TT on. Also ran TT on my older Jam. Both ran fine and TT startup was actually quicker on my M600 (maybe due to different SD card), but route planning was marginally quicker on the Jam. So far no speed problems with my M600 at all.
Prophet, Charmer and Wizard - since they are all OMAP based devices, can be overclocked using omapclock. I must admit I have not tried running TomTom at the default speed as I installed it since bumping the processor up to 240MHz but as things are it works great.
Dear all,
I was wondering if there is a way to use my MDA Compact as a USB Phone to operate Skype on my laptop. I know there is PPC version of Skype but for some reason it doesn't dial. So I would like to run Skype on the laptop and then use MDA as a head set.
Thanks a lot
Alex
I everybody
Somebody has already used XCPUScalar with the tytn ?
If it's yes could you give the best speed ?
Thx in advance
xcpuscalar works for pxa processors, hermes uses a samsung processor, so it doesn't work.
thx pof I suppose it's the same answer for trinity devices....
you can use only Pocket Hack Master - http://www.pocketgear.com/software_detail.asp?id=7258 , but only for underclocking device, to lower frequencies, you should have more battery life, but slower application. When I played with this settings I must HR my device, because he become crazy. you can overclock device only to few MHz, but you should have stability problems.
thank's for your advice sinmae
hi, hope i'm in the right place, i will be buying a htc tytn II today, i would like to know, whats the maximum that i can overclock the processor to without any malfunction and i also would like opera mini, especially if someone has a cab file for it. thanks in advance.
Tytn II = Kaiser... Wrong forum...