Please can anybody export hkey_local_machine/software/microsoft/bluetooth/serial and send me the whole key because I messed up with my registry, and it stuck. Now I just managed to delete it.
pleeeeeez
It would help if you specified your ROM version.
I can only assume you have a prophet (since you posted this in the prophet section).
My advice to you though - backup your contacts and files and hard reset the device. It is the best way to insure proper operation in this case.
WM6
i was hoping I could avoid it so I wouldn't have to re-solve the problem with a2dp but I decided to give wm6 a try...
So far so good. Thanx Anyway.
Related
Instaead of Hi I say you are great people
So the case is... I just need to have working Qtek 1010 with SOME additional soft on it inside a ROM...
I've read many pages in this forum and I'm able to find too many ways to change my ROM. I'm totaly confused.
I work for extremaly big worldwide company and they gave me q Qtek, told me to use it, gave me one simple application and web link... so I do.
But the Qtek is much powerfull than that so I need to flash my ROM.
Now comes a question: where can I find one document how to prepare for it, what tools do I need, how to do it... I know after some tries I will be confident enough to do such stuff easlily, my problem is I have only one try, they will make me w trouble if I screw my company recource.
I understand you had milion similar questions like that. Basicly I need help how to flash so I can be sure 100% not less that I can recover in case of trouble. I hope you understand I'm afraid to do it because lack of experience and you are able to tell me if I should try to flash...
or maybe it's better for me to ask my boss to by me a 512 MB SD and install all additional soft on it and stop worring about memory?
I'd appreciate any opinion... you are the best and I'm just new to this bussines...
Get an sd card, backup existing rom to sd card, very easy to do by bootloader method. Enter bootloader by holding down power while inserting stylus in the reset hole on the bottom left of pda then press top right function key, then choose ce to sd. Once you have done this you can check if it has in fact backed up your rom by putting sd card in the pda, enter bootloader, it will then give the option to program the rom, just remove the card and push the reset with stylus again, the other method to check a working backup is to put the sd card in the pda, the pda will ask to format it, say no and remove it. Once you have a backup you can either use xdatools to copy it to your pc or keep it in a safe place, no more files must be written to this card otherwise it will be rendered useless, if you wish to reuse the card sometime it will need formatting. Once you have your backup, go to www.yorch.net, cook yourself a rom and download it in the exe format, this will do a normal install from your pc while connected to pda via activesync, if it messes up you always have your backup. Once you become more proficient at using xdatools you might wish to try out lots of different roms until you are happy with the result, you can go on to sd card flashing which is a much better way of programming rom and much less prone to error because it doesnt rely on a pc connection. I would advise you to leave the radio stack alone, if you can make and receive call ok leave it alone. Have a thorough look around the forum before proceeding. Its good fun to program your pda and you can make it a much better tool, but make sure you always have a way out if things go wrong.
www.yorch.net not working... is there a place like that?
Hi!
I read the above post, one of the clearest here, and I almost got the confidence to finally do this ROM update...
But:
1) Can't find the www.yorch.net website where I could "cook myself a rom and dowload it in a .exe format"
2)It's still not very clear to me what exactly cooking a ROM means: it concerns the OS (the version 1.53, 1.72 type of stuff), the extended ROM (the default programs u get starting after and hard reset like the SW for the camera etc) or both?
Thanks!!!
Chris
Another ROM Kitchen
Try the following ROM Kitchen http://lumpistefan.dyndns.org/
I noticed that you have the XDAII. Now, someone please correct me if I'm wrong but the directions above and the ROM kitchens are all for the XDA I or Wallaby version.
Re: www.yorch.net not working... is there a place like that?
cchris said:
Hi!
I read the above post, one of the clearest here, and I almost got the confidence to finally do this ROM update...
But:
1) Can't find the www.yorch.net website where I could "cook myself a rom and dowload it in a .exe format"
2)It's still not very clear to me what exactly cooking a ROM means: it concerns the OS (the version 1.53, 1.72 type of stuff), the extended ROM (the default programs u get starting after and hard reset like the SW for the camera etc) or both?
Thanks!!!
Chris
Click to expand...
Click to collapse
Chris,
Those Roms are made for XDA1 beware it's not made for the device you have!!!!!!
What's the kitchen for XDA II
THANK YOU!
I was starting on the wrong foot... :-( :?
Anyway a couple of more question:
1) Is there a place like that for XDA II Kitchen? Is my undestanding of what a kitchen is correct?
2) The process for ROM backup outlined above, is still correct for XDA II?
Thanks!
Chris
I'm in the same boat as you CChris. I've been diligently a daily searching through the numerous topics on this site looking for similar information. I haven't found it yet - or at least nothing not-to-super-technical. I do know that you get to the bootloader by pressing the power button, reset button, and down on the toggle at the same time rather than the Wallaby way of the power and reset buttons only. It also seems that there are issues regarding 'country' and that it requires software to get around this. I haven't found the software yet - the links that I've seen all point to "itsme's" website which is currently down.
You can read the thread here: http://forum.xda-developers.com/viewtopic.php?t=9053&highlight=
Hopefully, someone with a lot more knowledge than me can go over updating the XDA II as clearly as cruisin-thru did for the XDA I.
The instructions on http://wiki.xda-developers.com/wiki/HimalayaRomFlashing are correct.
Unfortunately, there was an issue where the wiki removed the ~ from itsme's website's address. It's been replaced with %7e and now the link works.
If you download a ROM from the same vendor as your device (e.g. Qtek ROM on Qtek device, iMate ROM on iMate device, etc.) you don't need to use these instructions, you can just install the ROM upgrade from your vendor.
If you want to use the latest ROM (from iMate) and your device isn't an iMate, you need to decrypt, change the "country" code, encrypt, and then run the upgrade.
You can also edit the extended ROM when flashing, but it's easier to use itsme's extRom Tools. See http://forum.xda-developers.com/viewtopic.php?t=8422
You do NOT need to flash the ROM if you are not experiencing problems, or if you are experiencing problems which the new ROM also has (for example ugly cleartype fonts, which may be fixed without flashing). Flashing the ROM may void your warrantee. You will lose all your data when you upgrade, and you should not restore a backup, only your my documents folder.
If you are a newbie, it may be best not to flash your ROM. If you typed in itsme in google, you would have found his xs4all address as the third link, and would have quickly found out his site wasn't down at all, but the link was just wrong.
Just a warning: the things that could go wrong when flashing are potentially much worse than a wrong URL, and the answer to those problems won't be the third link in google.
NO MATTER WHAT YOU DO DON'T COME NEAR THE RADIO UPGRADE I QUOTE I FRIEND HERE THAT SAYS
DON'T MESS UP WITH A WORKING RADIO OR YOU'LL END UP WITH A SLIVER BRICK !!!!!!!!!
BEEN THEIR :x :x :x :x
Rabia said:
NO MATTER WHAT YOU DO DON'T COME NEAR THE RADIO UPGRADE I QUOTE I FRIEND HERE THAT SAYS
DON'T MESS UP WITH A WORKING RADIO OR YOU'LL END UP WITH A SLIVER BRICK !!!!!!!!!
BEEN THEIR :x :x :x :x
Click to expand...
Click to collapse
Rabia can you tell me how did you get out from there?
never got out of it
Hey all,
I am trying to get my app to tell WM2003SE to reload / refresh the wavedev.dll so that it loads a new version I have copied to the device, without having to perform a soft reset.
I have done a fair bit of searching around and can't find any way of doing this, does anyone know how I could go about it??
Cheers
Anyone got any ideas on this please ? even if its just to confirm that its not possible to do!
Cheers
I have just Up the Rom "XDA_IIi_Upgrade_v1.11.162_Radio_1.04" and now my O2 have a big problem.When i finish Up Rom,I HR and O2 start install the application,and when install the Cab_java_tao...,it said that "The file "rofs_target.zip" was not copied successfully.To reinstall,you will need to get the source.cab file again."Then it stop install and i must SR,so many application can't be install.And i tried to Up many diiffirent Rom,but i still error.My friend in Vietnam give me a Rom which have been Cook,he delete the Cab_java_tao...,so the error "The file "rofs_target.zip" was not copied successfully.To reinstall,you will need to get the source.cab file again." does not appear.But I can't Up any newest Rom with Cab_java_tao...Any one can help me
You've tried unlocking the extended ROM using the tools on this site haven't you. They don't wirk unfortunately, all they do is lock the storage so you can't write to it and unfortunately hard resets don't work. I know, I did it when I knew nothing about these devices as well. Have a look at this tool by Gorosz:
http://forum.xda-developers.com/viewtopic.php?p=147439
Also if you are not in the UK, this ROM may be better for you:
ftp://xda:[email protected]_Ext-1.11.162_Radio-1.04_O2stuffstripped.rar
Good luck,
Pug.
Thx Pug,i can fix my O2 error.I uesd exttools_modified_alpine to unlock the Stogare and delete all files in Storage.After that,i Up Rom again and everything is good.
Anyone have the same error with me can do that:
1.Open the registry->HKEY_LOCAL_MACHINE->System->StogareManager->Profiles>TRUEFFS_DOC->
rename "Stogare" to another name(e.x: "hello")
2.SR->used exttools_modified_alpine to unlock Extrom Rom
3.Go to the folder using File Explorer to delete all files in folder that you rename (e.x: "hello")
4.Rename that folder (hello) to Storage again and SR
5.Up Rom again and everything will good.
Thx for a friend in VN help me fix this problem and thx for Pug much.
Hi Pug,
I need your help buddy. I bought Alpine (PDA2) and it was so cool. Now I have a problem that its touchpad is not working anymore. PDA is working fine but no more touchpad. I didnt drop it at all. Let me tell you what happened.
I used permanent save function to save my contact list. It saved the contacts and then it happened. After some time a window showed up "Contact syncronizing" and after that touchpad didnt work.
I have replaced different ROMs since then, every update has completed successfully but touchpad is not working. Can you guide me what to do ? I am sure somehow touchpad has become disabled (not hardware problem) is there any pc utility which can link with it ??? Pls help
Qbukhari.
Can you align the screen at all after a hard reset or rom update? If not it's a hardware problem and the touchpad needs replacing. Possibly the connector from the screen to the m/board has come loose, unlikely though.
The only problem I have found that survived a hard reset was a locked storage.
But may i have attention plz
i have an alpine (O2 xdaIIi)
i never delt such a case i had today, it was just a user code in that set, i hard reset that set but the password was still there, i was surprized. why code is still there after hard reset.
i quickly flashed my set with this rom Alpine_Ext-1.11.162_Radio-1.04_O2stuffstripped
but my amazment was more gaged after doing flash that user code is still there...........
how it can be possible ???
now i wanna know is, if the rom is erased and ihave flasehd a new rom then why password is still there
and phone is still giving owner info
pleaes seniors i need answer on this strange issue
Hi,
I have a T-Mobile MDA Compact III (aka HTC Hero) and I was trying to change some things in registry, also I owerwrited some dll witch had attribute ROM (using sktools). Now I have ppc with not working camera unfortunately. Will hard-reset fix my problem ? Will it give me correct registry and also all device dll to default settings ?
Yes, a hard reset will restore your device to the way it was when you first got it. It's like formatting your PC hard disk and re-installing Windows.
Hard-reset didn't fix
Hi,
I have the same problem. When I start up the camera I get the message, the camer couldn't initialize. I have SKtools installed. Hopefully someone has an idea.
as said above.press reset hole &2soft keys ("-")together then "yes-green bttn".or somewhere in settings is'Clear Storage'. btw, backup ur contacts... before
premnik said:
Hi,
I have a T-Mobile MDA Compact III (aka HTC Hero) and I was trying to change some things in registry, also I owerwrited some dll witch had attribute ROM (using sktools). Now I have ppc with not working camera unfortunately. Will hard-reset fix my problem ? Will it give me correct registry and also all device dll to default settings ?
Click to expand...
Click to collapse
The golden rule to avoid having to hard reset is to always backup your phone before starting to mess around with the registry, that way you can undo any mistakes you've made.
I think that SKTools backs up the registry before deleting or changing some value so you may want to check up on that before hard resetting.
Hi, pleas if someone know, help me.
Made downgrade of my Qtec9100 right due to instructions of Dr Puttingham. Got G3. All was great but, by mistake I started flashing radio first. (radio rom 3.02.11) But something went wrong.
Wizard do not want comunicate with PC. Made hard reset, but not work.
Still see big beer and greetings from Button. IPL 1.01 and SPL 1.01 and OS 1.5.4.2 - after 5 times reseting it will start WM5. Phone is off.
Please help. Is there som cab which can help me?? I still can write some programs to the storage card. Can I flash it back to radio 1.01 ? from card? And then may start work USB....
Please help me.
Uff, can charge but only if it is off.
hey again,
really no one can help me?
Are there some "cab" which can reanimate usb connection of my wizard?
I still can use my memory card to do some update. But cannot find any cab programm. please help.
hi,
don't worry. i have nearly the same problem with my g4.
bootloader start, but flashing anything didn't let the phone starts.
i think our phones are too old, so the cracks don'T read the threads here.
my posting in g4-section is also didn't answered.
the ftp-section is empty.
if noone can help me the next days, i will buy another one from ebay.
so don't worry
greetz
Hmm, but that's pity isn't it?
my wizard is working but can't use USB connection. maybe there is sam cab program which can make changes and set USB to work.
but thx 4 reply
hi,
no one help me, but reading of forum save my wizard from destruction.
this thread help me and my Wizard is in good health yet
http://forum.xda-developers.com/showthread.php?t=341158&highlight=program
Thx a lot to You Great Zabardast_1 - You are a great ONE