remove Icontact link - JAMin, XDA Neo, S200 General

Hi
I have a Qtek s200 and after installing icontact v2.0. i dosen´t work.
after i try to remove it by using remove programs apps. then an error occoured and now i have a icon of icontact on the desktop and a can´t remove and access the contac list.
how can i solve it?
filipe

Related

Uninstall Default Software?

I want to uninstall some of the default software such as IA Caller ID and Photo Contacts, and the Westtek Viewers (which are shockingly bad). There is no option, however, in the "Remove Programs" dialogue. What's the best way, therefore, to remove the offending programs?
http://wiki.xda-developers.com/index.php?pagename=ER2003Edit
The links don't work
I did it so...
There is no way(i suppose) to uninstall them but...!
Follow this few steps(only if you want to do a hard-reset).
- Hard-Reset your device after necessary back-up
- Wait(Don't enter the PIN code at this time)for the auto-install countdown message
- At this moment do a soft-reset. The auto-install procedure will not be done and all the software from Ext.ROM will not be installed.
- You get now an empty device without any modifications from your operator
- Unhide the Ext.ROM with unlocking tools(available for download somewhere at this site-it is a *.cab file for install to your device).
- Install that cabs from the Ext.ROM which you need(such as Camera,MMS etc.).
If you want,you can cook your own Extended ROM with your favorite applications with the ER2003 tool.

Help: can't uninstall programs from jasjar

I am unable to uninstall programs from my jasjar. When I try to remove programs from activesyn there is no response. When I try to remove programs directly from jasjar with "remove programs" I get the response that the program was not removed and would I like to remove the name of the program from the list of installed programs. Either way my programs cannot be removed. Can anyone help me with this problem?
Thanks
Softreset first then uninstall... Some times you can not uninstall two apps after each other. You have to softreset before each removal...
I tried your suggestions several times but it does not work for me. Any other thoughts?
Thanks
WM5 doesn't flush the registry until the device is powered off. You should either use a software based reset button - such as from SPB PocketPlus, or turn the device off (this is better), wait 10 seconds and then press the reset button.
Still no luck
I tried resetting after leaving the jasjar shut for more than 10 seconds and still I have no luck removing programs either directly or via activesync. I would still appreciate any suggestions otherwise it looks like a hard reset is unavoidable.
Thanks, a
Other way to remove programs?
Is it possible to effectively remove programs by using resco explorer? And if so, how can you ensure a clean remove?
A.
I have the same problem, I always have to remove manually. I can not install overwrite any software, and when I want to upgrade a new version, I have to find its old cab files to see the list of files to find them and delete. Any suggestion? Thanks in advance.
Still no solution to removing programs
I was wondering if anyone has found a solution to our problem of not being able to remove programs.
Also, as we cannot remove programs via activesync or the standard remove programs from the pocket pc (Jasjar), what are the steps to thoroughly remove files manually?
Thanks
@apap
I found some beta WM5 apps cannot be removed even using Remove apps from the control panel or even the "delete" function from the File explorer! In the end I had to hard reset my JJ to get rid off two apps. I have also been told to use the Resco Explorer to delete programs from the directory directly.
Thanks. When you delete with Resco is it enough to remove folder with application or should you also clear things from registry?

Remove program does not work

Hi everybody
hope you all had a wonderful christmas.
I've come across this problem on my Xda Exec any program I try to uninstall through remove program in the settings it gives me an error say that it was unable to remove the program.
Anybody come across this problem.
If it is a bug has anybody find a way to fix it.
Ciao
Gigino
Have a wonderful new year to evryone one the forum
Have removed loads of programs with no problems on my wizard. Are you using a memory card ? All my progs have been installed to the built in memory as I dont have a mini sd yet.
It does not matter where I have the program install it gives me the same problem.
I've try installing it on the SD Card the Main memory everytime I go to remove it from the remove list I get error Its has not been completely removed do you what to remove it from the list you say yes the only thing it removes is the name of the program from the removal list but the program is still where it was install with all the icons.
So please can anyone help or I have to do a Hard Rest which I real do not what to do.
I'm trying to unistall Phatspell 1.4.
I've deleted the directory with all the dictionary but I have an Icon left in the settings folder which I do not known how to remove.
Look in the system folder with Total Commander but it is empty like all the icons are hide.
Help please.
Ciao
Gigino
Try SK Tools to clean away anything left from the uninstalle.
Thank you very much the SK Tool worked.
Thank you once again.
Ciao
Gigino
I had the same problem. As hotfix is SKTools the best choice in my opinion, but after a hardreset was the problem gone. I'm able now to deinstall the programms cleanly.

Can't remove/install programs!

Hello
Yesterday i tried to remove a program on my Qtek9000. But in the add/remove program, where
all installed programs are listed, was nothing! It was empty!
Then I tried to connect to the Computer but without success! An error Message appeared, "Can't
synchronize, please reconnect an try again!"
I can't even install a new program!
Please help me!
Geko
Turn OFF your firewalls then connect your Universal via USB again.
hmm, Doesn't work.
Any other ideas?
I am having similar problems. I have a list of installed programs in the uninstall list. However, whenever I install new softwares, they are not shown in the uninstall list, thus I cannot uninstall any new softwares. Anyone knows what happens?
daddyfok said:
I am having similar problems. I have a list of installed programs in the uninstall list. However, whenever I install new softwares, they are not shown in the uninstall list, thus I cannot uninstall any new softwares. Anyone knows what happens?
Click to expand...
Click to collapse
...your not using phoneAlarm are you?
This is a documented issue with a previous version and is fixed in the latest release.
Matt
Yes PhoneAlarm is an issue and does prevent installed programs to show up in the list of installed programs. If you cannot live without PhoneAlarm (Like Myself) then you have two options:
You can install SKTools. The uninstallation utility in SKTools will still show the list of installed programs even if it is not shown in the generic Windows utility.
The other option involves changing the registry. You will need a registry editor like Resco. The procedure is as follows:
1) go to..
HKEY_LOCAL_MACHINE\Security\AppInstall\
2) Select the application directory that is not showing up in the list
3) change the DWORD Role data from 40 to 24
4) Now the application will show up in the list.
Hope this works for you
Regards
srmz you are great !!!! It works and I can uninstall programs now.
I have never installed PhoneAlarm, and I forget starting from when this problem appears.
Also thanks matt1971 for rasing the possible reason leading to the problem. You guys are great !!
I now have the same problem - I can't install programs (get a message saying installation was unsuccseful), and when I try to remove programs there are none at all in the list.
All I've done today is install sbp Weather.
All programs work fine, but I also can't change Today Theme - it seems to be stuck on default.
Anyone able to help?
Cheers
Rowan
yes I have the exact same issue...this post is about not being able to sync, install, or uninstall anything....while srmz's post was informational, it didn't help those of us who has this problem...
please can anyone help? I really don't want to have to hard-reset my phone
Thanks
Anthony
U shld try M$ As 4.5 version sometimes it happens dat ur device doesn't show u the complete list of prog. installed but with Async it will show u ,from which u can uninstall the prog u want to.

is possible to remove comm manager?

hi to all, i'm pretty new here in the room of prophet...
my new jamin as the default icon of comm manager in the tray bar, is possible to remove that icon like universal or tytn?
many thx for any help
best regards
roberto
Yes, it's very simple:
open \Windows\StartUp directory on yor device and delete Init_Tray.lnk
Then reset your device.
many thx!
Is it possible to add some icon too?
For example the TomTom icon or ...
http://forum.xda-developers.com/showthread.php?t=258342&highlight=

Categories

Resources