Database Users

Your experience with overclocking?

Hi!
Has anyone yet found out good values for the overclocking? Can the overclocking damage the Prophet (O2 XDA Neo)?
Does the overclocked CPU drain more battery power?

that tool is great to overclock the profhet to 240-250 Mhz
you must test it what for you the best config !

I've been overclocking my JAMin since day 1 (about 6 weeks now) and with great results. I have set it up to overclock @240MHz all the time (do a search for the instructions) and it's been stable, quick and with no major impact on battery life.
Since the last ROM update - the JAMin has been stable with no spontaneous soft resets. Just great.
Nir

is the rom-update available for the o2 xda neo, too?

noch nicht wenn es rauskommt findest du es hier...
http://www.o2-online.de/o2/kunden/technikundeinst/exclusive/xda/xdaneo/index.html

The only upgrade you'll get is Imates, qtek s200 or dopods. O2 sucks as far as upgrade concern. Especially in germany. This so called tech support guys still think that you’ll kill the device if you upgrade it! At least this is what they been telling me! The bottom line, get an update, get “fixed” RUU, search forum, and run an update. You’ll loose german rom though unless you back it up using aWizard.

My S200 overclocked about 5 weeks by now. 276 MHz cause spontaneous softreset once or twice per day. 264MHz works fine; it is my current overclock speed. I don’t think it may cause battery drain, but something drains battery randomly. My suspect is Communication Manager.

I'm using smartskey to overclock. When set to 240 it crashes. Anyone knows why? I'm also using O2 and i've made some standard registry hacks (cache size).

264MHz works for me too.
What programs do we use for benchmarking to see what outperforms what

activesync dropout
I can overclock up to 240 but when I connect to active sync 4.1 it keep dropping its conection

Camera problem when overclocking...
When overclocking above 234 Hz w/ BatteryStatus or 216 with Omapclock,... I get strange dots and color in camera...
Anyone having same problem?

Well in the topic about upgrading to one of the latest roms I saw a lot of people having problems with the camera and overclocking. So it seems to be happening when overclocking for sure. Not much you can do about it except clocking it back when you want to use the camera

I have the same Problem. Thats why I use applicationbased clocking with Batteriestatus, setting Kamera and Coolcamera to 195 mHz.
cu seneca

Yeah, same here btw totally forgot to mention that.
I use batterystatus with the CPUscaler option on. At the moment I have it automaticly scaled up to 221mhz when needed. But indeed all the camera apps have it set back at 195.
Not quite sure to what speed I can go safely. Mostly need somewhat more speed with the navigation on in the car. Although that uses the device 100% for sometimes hours. So since most of the people go up to 240 I just though 220 might be a safe number No problems so far.
Anyway, I'm interested in making it a little bit faster. But an overclock of over 20% just seems too much (or too good to be true )...

seneca said:
I have the same Problem. Thats why I use applicationbased clocking with Batteriestatus, setting Kamera and Coolcamera to 195 mHz.
cu seneca
Click to expand...
Click to collapse
Uppss, ... sounds great. But I can not find any applicationbased clocking in my BatteryStatus plug-in.... What else do I need?
Thanks in advance.
Jarel

I have a O2 Neo. and currently is overclocked at 260 mhz. no problem so far.

Uppss, ... sounds great. But I can not find any applicationbased clocking in my BatteryStatus plug-in.... What else do I need?
Click to expand...
Click to collapse
You need the Version BatteryStatusPlus.Beta1.0.03.zip of BatterieStatusPlugin at the first Message of this Thread
cu seneca

Thanks Seneca...
I had the non.beta version installed, thus not having those options... Is this Beta version stable/well-proven? Why don't they ibnclude this functionaility in the "definitive" non-beta version?
Thanks again, great forum and great support!
Jarel

After finishing the Beta Phase, it will be included in an extendet Version.
On my NEO/Qtek it is very stable. But read the Thread. There are the answers.
cu seneca

With respect to overclocking it has been stable for a long time. With regards to other features they appear to be stable, hence the change to beta status.
The only question is how high you can overclock your specific device. You will need to use trial and error. Note that as the device get hot, the max overclock speed drops. It's a physics thing.
jarel said:
Thanks Seneca...
I had the non.beta version installed, thus not having those options... Is this Beta version stable/well-proven? Why don't they ibnclude this functionaility in the "definitive" non-beta version?
Jarel
Click to expand...
Click to collapse

Overclock over 240MHZ...

Hi guys!
I see that my Jamin is stable at 240MHZ... what is, in your opinion, the hi stable overclock for the Jamin... ?

O2 Neo
Hi, i run my O2 Neo at 240 stable. I'll probably try even 252. It's summer so I wouldn't push it higher than that. 252 could be stable, but depends on conditions. Just try it for few days.

Running at 240 MHz, it the battery life MUCH reduced than using factory 200 MHz speed?

My opinion - 'Sligtly' is more accurate then MUCH. But i didn't measure it.

252 MHz for 2 month on my XDA Neo with JAMin ROM, without any problem. Battery life is good, did not really see any difference before and after overlocking.

Well, I have been running my wizard at 264 MHz for 4 months straight and it has never failed on me. i have it on all the time after standby and soft resets. ive also tried 276MHz for a while but i had to soft reset it almost twice a day.

BTW, increasing the clock higher than usual does not heat up your device. the most it would do is soft reset it. temperature running at 264mhz is mostly the same as running at factory speed. (well for me it has) dont know about some of you.

lsnizzle said:
BTW, increasing the clock higher than usual does not heat up your device. the most it would do is soft reset it. temperature running at 264mhz is mostly the same as running at factory speed. (well for me it has) dont know about some of you.
Click to expand...
Click to collapse
How do ya measure the temp?

cellchamp said:
How do ya measure the temp?
Click to expand...
Click to collapse
Xbar can do it

Overclok on Dopod 818pro
Guys, my device is Dopod 818pro, and i was using OmapClock.exe to OvClock my processor, but, when the first time i run this program, the clock speed, says 264 Mhz? is it supposed to be the correct Processor Speed?
I got confused as i read anywhere else that the default factory speed is only at 180 Mhz.
But why is it my device gives me a 264 Mhz on Clock Speed?
also i've tried all the guides and tricks to keep my Clock Speed at certain number (eg. 216 Mhz). such as using a MemMaid and etc. but still, i always got the number 264 Mhz and it won't change at all... neither after soft-reset nor stand-by.
Anyone got the same problems?
I forgot to mention, when the first time i bought this 818pro, i felt that my device run very fast, even faster than my friends HP 6828 and ATOM PURE. Did i get lucky or sumthin'?
Everything on my device is still on factory setting...
i removed the OmapClock and Other Utility Software..

also..... there is one more sw.... 'Pocket Hack Master' from http://www.antontomov.com.... have a look whether it has compatiblity with URs.....
might be helpful.....

Mine has been stable at 240MHz for 2 months so about 6 weeks ago I bumped it to 252MHz and is stable since.
Nir

thanks! :wink:

Re: Overclok on Dopod 818pro
p12a said:
Guys, my device is Dopod 818pro, and i was using OmapClock.exe to OvClock my processor, but, when the first time i run this program, the clock speed, says 264 Mhz? is it supposed to be the correct Processor Speed?
I got confused as i read anywhere else that the default factory speed is only at 180 Mhz.
But why is it my device gives me a 264 Mhz on Clock Speed?
also i've tried all the guides and tricks to keep my Clock Speed at certain number (eg. 216 Mhz). such as using a MemMaid and etc. but still, i always got the number 264 Mhz and it won't change at all... neither after soft-reset nor stand-by.
Anyone got the same problems?
I forgot to mention, when the first time i bought this 818pro, i felt that my device run very fast, even faster than my friends HP 6828 and ATOM PURE. Did i get lucky or sumthin'?
Everything on my device is still on factory setting...
i removed the OmapClock and Other Utility Software..
Click to expand...
Click to collapse
Try installing the demo of sktools - its the only program I know that shows the true processor speed.

i did over clock to my device into 240, and it's works normally, but i don't know how to know that my overclocking was success or not, where can i read the speed of processor after overclocked?
rGrds
-wisnu-

how do i keep my device permanently on at a certain speed thgough omapclock?
also i would like the overlock to work at the set speed even after soft resets. Is this possible?

cellchamp said:
how do i keep my device permanently on at a certain speed thgough omapclock?
also i would like the overlock to work at the set speed even after soft resets. Is this possible?
Click to expand...
Click to collapse
Yes you can 2 simple methods here
1. Using omapclockplus - see here http://forum.xda-developers.com/viewtopic.php?t=56057
2. Use batterystatus plugin - displays Mhz on today screen and has omap functions inc device wakeup overclocking see here http://forum.xda-developers.com/viewtopic.php?t=55782
You could also use smartskey or notification queue method but above methods use easy install cabs.

median said:
My opinion - 'Sligtly' is more accurate then MUCH. But i didn't measure it.
Click to expand...
Click to collapse
Just tried - I agree, there is no big difference in battery life - similar autonomy than factory settings when running at 240 MHz...

Hi,
I really don't recommand to overclock the prophet over 240mhz.
I overclocked my first prophet @252mhz.
I had no crash problem with this overclocking, but it burned the bluetooth chipset.
Now i have a new one and have a permanent overclock @216mhz, and sometimes i overclock it @240mhz, but usually it' only to do some tests!
The 216mhz is more than enough to do what i want.
Bye
Herc. 8)

Ive clocked my 9100.....now I need to test the speed

Guys,
I just clocked my 9100 to 264mhz and its running very stable and fast. Howver Id really like to have a small test program that can tell me exactly how many mhz its actually running at.
Who's got a small application that can tell me the speed in mhz ??

I use BatteryStatus.
http://forum.xda-developers.com/viewtopic.php?t=55782&highlight=batterystatus
You can also use a product like SKTools which is a great util for WM devices.
HTH!

Thanks dude......Im apparently running at 286mhz......even though Ive only clocked it to 264

Which application did you use to overclock your CPU? I've tried OmapClock (and went upto 220MHz), but it freezes frequently...

not all wizards can go much beyond 240, mine is fine at 240 but my friends only goes to 220MHz without crashing.
Luck of the draw i guess

guess i got lucky... constantly @276 and stable...

prophet overclock

Is it bad for the cpu of my qtek200 to overclock it? for example run it at 230mhz?

lordsinasina said:
Is it bad for the cpu of my qtek200 to overclock it? for example run it at 230mhz?
Click to expand...
Click to collapse
use the search function , you can easly overclock it to 260

over clocking issue
Hello all,
I have purchased a used prophet, unfortunately the person who sold it to me did not use it for approx 3 months, so what i did naturally is as soon as i purchased it i have up graded to WM6 Touch rom. I have activated the over clock feature which worked great.
After a few hours my battery suddenly died, it turned up that the battery needed to be changed after i purchased a new one i released my phone kept hanging and becoming slow and sluggish, i started to hard reset and re-install roms and so on, then i remembered that i have set my cpu speed before it dead to approx 65 Mhz. So i re-installed the over-clock app and set it back to 195, now it works great....
so be carefully

overclocking

what is the highest that the wing can be overclocked and what would be the best program to do so?

rastlin said:
what is the highest that the wing can be overclocked and what would be the best program to do so?
Click to expand...
Click to collapse
You are prob going to be slammed with 'use the search feature', but, I'm bored as hell at work, so I thought I'd help.
You will find many people use different speeds, and different programs. The two I've used are batterystatus and Omap. Personally, I like batterystatus, and I've safely clocked mine to 299mhz.

BatteryStatus? Isn't that way old?
I highly recommend HomeScreen Plus Plus (which is the new version of Battery Status) just google it and you'll find it and download the Advanced verson not the Basic one.
And I safely overclock it to 299 with no problems. I went to 312 once but every so often the phone would rest itself.
HS++ is also good cause it auto underclocks and auto overclocks your device so when your phone is sleeping it saves battery .

buru898 said:
BatteryStatus? Isn't that way old?
I highly recommend HomeScreen Plus Plus (which is the new version of Battery Status) just google it and you'll find it and download the Advanced verson not the Basic one.
And I safely overclock it to 299 with no problems. I went to 312 once but every so often the phone would rest itself.
HS++ is also good cause it auto underclocks and auto overclocks your device so when your phone is sleeping it saves battery .
Click to expand...
Click to collapse
+1000000 this is awesome man! thanks

i want to thank everyone that had responded i did a little research and i was confused. ya see i am using batterystatus .04 and if i go above 260 my phone freezes and to be quite frank i had 2 wizards that i believe died from overclocking. they both one day randomly after a reset went to the bootloader screen and stayed. i had tried a hard reset and flashing the unit with no luck personally i dont have a clue what happened and with this one being my only source of 'net access i cannot mess it over once again thank everyone whom responded
-rastlin

Hmm wow I'm sorry for your Wizard but the Wings can go up to 299mhz without dying and the good thing about HS++ is that if you enable CPU Scaler and set the overclock to say... like 400 and your phone freezes, just plug in your charger and reset your phone. The CPU Scaler is disabled as long as you have a power cord plugged in your phone (your phone stays on it's native speed) so you can just go back into the CPU Scaler overclock settings and lower it and try again ^_^!!
So just use the CPU Scaler to find the highest overclock speed but never just set the overclock speed in the normal overclock menu. Use the CPU Scaler auto overclock option and you won't need to hard reset your phone.

thanks for the advice. so it is possible to kill a unit with overclocking i just wanted to be sure, cause when i asked in the wizard forms if i am not mistaken no one answered me. i had also asked hct via a number provided to me by tmobile and they said the stock "i dunno we will have to look at the unit and that will be $180" towhich i responded f**k!! that i can get a new unit for under 130 off of ebay then got a wing....
-rastlin