About G3 Device. - 8125, K-JAM, P4300, MDA Vario General

Hello everyone.
I have a recently bought a HTC Wizard a few weeks ago but i have some questions for CID unlocking this device. I have already read that page for getting my G3 or G4 version which is :http://wiki.xda-developers.com/index.php?pagename=Wizard_Versions
My first question is:
When i soft-reset the phone it shows:
IPL : 2.16
SPL : 2.16
OS: 2.16.1.4​
But when i'm uisng Wizard Service Tool 0.3.0.3 (I have firstly executed EnableRAPI.cab on my phone, and launched ActiveSync as a Guest mode.)
with Device info, it gives:
SPL: 2.16.0000
Registry AKU: .2.0.0
OS: 5.1 (Build 14847)
ROM: 2.16
Extended Rom: 2.16.1.110
Radio: 01.04.10
Protocol : 4.0.13.17​
So before starting to downgrade my Wizard, i'm really confused about my version of G3/G4.
My second question is:
If it's correct, which version of ROM should i use for downgrading my Wizard before using Lokiwiz 0.3.
Keep up this good work.
Thanks in advance.

Hi,
your device is indeed a G3 because the SPL shown by WST doesn't have the 1 at the end.
I didn't think it would be confusing to show all the digits (2.16.0000) because it's well known that G4 have the 1 at the end but the fact is that the 4 digits are there in the flash; the SPL at boot simply doesn't show them
I guess i can make a change to the program and have it explicitly say which generation it is: G3 or G4
Regarding the second issue it is an absolute requirement to have an IPL/SPL 1.xx (and OS too!) in order for the CID unlock to succeed. But you can use WST to CID unlock as well

Hello dear mestrini ;
Firstly thanks for your kindly response. I was really not sure about my IPL/SPL value for going over a down-grade.
So i've looked over The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards (http://forum.xda-developers.com/showthread.php?t=285435)
Firstly i've ran the downgrade from my ROM to Button Rom 1.05, and WSE showed IPL 1.01 and SPL 2.16.
I have ran a second time the downgrade (Button Rom 1.05) and my IPL/SPL was set to 1.0.1.
I'm just attaching my screenshots if my process was OK.
Device info:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cid Status:
Thanks in advance.

Sure, no problem
But i'd like a favor in return which is your contribution to my "Data Crashes" fix project. Check my signature below and click the link to the thread
BTW, your phone is (or was?) already CID unlocked
tx

Related

Help Me.. I have Problem to update ROM in T-mobile MDA Pro

I cannot update ROM in T-mobile MDA Pro
In Process update Radio Rom is OK...
But In Step To Update Extended Rom I have error in 99%
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and I update only CE Rom process is same error in 99%
In Step Update I'm remove SD Card & Sim Card and I update boot loader to ver 1.01
I change update rom to orange / i-mate / q-tek / dopod and O2
It's same error
I don't know what's wrong
Some body help me pls..
Try tu use standard T-Mobile upgrade software - shipped complete, like"UNI_TMUK_12032_120_10600.exe" , maybe it will solve your problem.You can find it: ftp://ftp.xda-developers.com/Universal/Shipped_Complete_Updates/
Please let us know which system do you have now :?:
I try to used Original T-Mobile Rom "UNI_TMUK_12032_120_10600.exe"
But It Same error with I used Other ROM
In PIC I used MaUpgradeUt_noID.exe to update with O2 Exec Rom
This's error show when I update my MDA Pro with T-Mobile "UNI_TMUK_12032_120_10600.exe" Rom
Probably you created problem
In Step Update I'm remove SD Card & Sim Card and I update boot loader to ver 1.01
Click to expand...
Click to collapse
You have to downgrade bootloader
Try it, maybe it will help you. http://forum.xda-developers.com/download.php?id=11414
Deer jas_pik
Before I upgrade Bootloader to Ver 1.01. I try to update any rom ( include T-Mobile Rom) in bootloaer ver 1.00 , It's same error
I think upgrade bootloader to ver 1.01 is solve my problem , I try to update bootloader but It's same error too
Now I cannot downgrade bootloader to ver 1.00 because file is You tell me to download bootloader1.nb , I don't know how to use it
I find topic http://forum.xda-developers.com/viewtopic.php?t=48590
I'm download BL10_RUU_UNI_V11.exe to downgrade but It's again country id problem...and now the MaUpgradeUt_noID doesn't work

Artemis Radio 02.88.90 (GSM upgrade Only)

I have extracted GSM.nb from latest O2 ROM, and created an Artemis NBH for radio upgrade only, I think this is the latest radio available for Artemis now, if there are any newer please let me know.
You can download it here:
ARTEMIS_Radio_02.88.90.zip​
NOTE: You need to flash Artemis USPL before flashing this radio, for more info refere to the USPL thread.
Enjoy!
Thanks again pof you are the biggest !!!!
Thanks for your help ...!
Nice again.
it worked!
first did the uspl thing
then updated the radio rom and now my radio is 2.88.90
thank you ,you guys rock.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This bird don't fly in my cage
The radio update will not install. After selecting the USPL program, it says : rom update corrupted.
Why?
Please advise.
Ronald
Same here, I SIM and CID unlocked my Dutch MDA Compact III a while ago, but I want to update the radio only. I did not use the USPL method, because my device is allready CID unlocked (am I correct here?).
When I try to update the radio-rom it says: rom update corrupted.
What goes wrong?
TylerDurden1337 said:
Same here, I SIM and CID unlocked my Dutch MDA Compact III a while ago, but I want to update the radio only. I did not use the USPL method, because my device is allready CID unlocked (am I correct here?).
When I try to update the radio-rom it says: rom update corrupted.
What goes wrong?
Click to expand...
Click to collapse
Try this one:
Artemis Radio 02.93.90 (GSM upgrade Only)
As the UK MDA doesnt have WiFi will this radio work OK as it usually updates the Wifi part as well.
and what is the advantage of this patch?
Are there any differences?
I would like to know too what the advantage is of a Radio upgrade. Does it provide better calling quality or such?
goblinIT said:
Try this one:
Artemis Radio 02.93.90 (GSM upgrade Only)
Click to expand...
Click to collapse
Same problem. The Progress bar reaches 100% but my PC give the error: 270. I currently have the original MDA Compact III rom installed, is that the problem?

pls heeeeelp!!!

i'm a newby here. i have a htc 3300 with wm 6.1, but my device keeps on blocking a few times a day. iwant to install the original wm 5.0, but i don't know how. it would be the first time i do this thing and i'm afraid of damaging my phone. please help me and show me the steps to flash wm 6.0 on my device. be patient with me and explain it just like to an idiot. thanks a lot!!!!
PS: HEEEEEEEEELP me!!!!!!!!!!!!!
amoromete said:
i'm a newby here. i have a htc 3300 with wm 6.1, but my device keeps on blocking a few times a day. iwant to install the original wm 5.0, but i don't know how. it would be the first time i do this thing and i'm afraid of damaging my phone. please help me and show me the steps to flash wm 6.0 on my device. be patient with me and explain it just like to an idiot. thanks a lot!!!!
PS: HEEEEEEEEELP me!!!!!!!!!!!!!
Click to expand...
Click to collapse
there is no need to downgrade to wm5,wm6 is better,and is stable,it just depends on rom you flashed
so try flashing another wm6/wm6.1 rom or try to hard reset
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but if you really want, here is how to downgrade: go to htc.com,download the shipped wm5 rom for artemis and flash it without using uspl,just run the upgrade....but i'm only 90% sure,so wait a bit till someone aprooves the method
if you're a noob you don't have to be an idiot
Maybe you've installed a cooked ROM that isn't as stable as you expected.
You can always install the official WM6 WWE (English) ROM, this is exactly what I did and I find it extremely stable. So...
1. Read the first thread in this forum and use the Artemis USPL tool.
2. Download and install the ROM from this link: http://rapidshare.com/files/60087606/HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R.exe
3. You can upgrade the radio ROM to the latest one (you must use the USPL tool once again). Download it from: http://www.fs2you.com/en/files/660aee8c-2eff-11dd-99ec-0014221f4662/
After this, you should be OK.
Good luck
thank you so much!!!! i don't have time right now, but i will try to flash the rom again. i ha ve already done soft and hard reset. the result... the same. thanks again!!!

[ROM][WWE]Stock 1.48.405.2 + Radio 2.06.51.07

Does exactly what it says on the tin
Stock 'Untouched' OS (1.48.405.2) with Radio from 1.61 (15.30.50.07U_2.06.51.07).
This won't overwrite HardSPL.
Download: Stock 1.48.405.2 WWE with 2.06 Radio.7z - 168.5MB
Thanks to zzattack for hosting.
THANKs​
shots from my Leo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well, this is a bit puzzling, I have got this ROM (1.48.405.2 + Radio 2.06.51.07) on brand new, sealed HD2 (from Virgin UK). All the details are exactly like on the screen above.
How is this possible? New batch?
I'd assume since we've all tested it here... HTC have given the green light to ship
I found this puzzling too, I have a recent Virgin HD2 and I have downloaded the updates to it from the HTC website. EXCEPT the ROM upgrade, as when I downloaded that it appeared from the downloaded file name that the Protocol and Radio Versions I have on my recent Virgin HD2 are already newer than thoses shown on the downloaded ROM upgrade.
My HD2 software information is exactly the same as posted above.
Please could someone clarify, am I supposed to install the ROM upgrade from the HTC site please, I couldnt work out whether the instructions were for someone already having 1.48.405.2, which I have or whether the download upgrades from that. Thx.
I assume that the virgin rom contains most of the hotfixes preapplied. Hotfix 0091217 contains this radio upgrade.
Yeah, mystery solved, 'SIM contacts fix' is in fact radio update to 2.06.51.07
Since HTC has became "quietly brilliant" they are completely rubbish when it comes to inform what exactly all these updates does.. There is only marketing blabbing like "everything was brilliant and now is going to be ever more brilliant"..
This ROM is very fast and stable!
Thanks for the replies I totally agree its confusing, I know for a fact that the stock virgin ROM didnt incluse the pink camera update as that was a problem i fixed from HTC's site with noticeanle improvement. So it looks like some have been applied and some not, thanks for the ifo on the radio, does anyone know if the HTC protocol is included in Virgins ROM as thats a different number to the number on the HT website download as mentioned above. Thx

[Q] How to fix Invalid Model ID?

Couple of days before I tried to unlock my Ameo using the Olipro’s AthenaUnlocker. This program said that everything was OK, but my Ameo still refused my Vodafone SIM card, so I thought the unlocking was not successful.
During the last days I read a lot, upgraded several ROMs, tried different operation systems (WM5, WM6, WM6.1), skins and radio versions (1.47, 1.50, 1.57). For example:
RUU_Athena_TMO_DE_1.12.111.6_1.32.00.00_Ship.rar
WWE WM6 ROM for English T-mobile MDA Ameo - Athena_WM6_TMUK_2.35.110.4.zip
Athena Project Black Touch Edition by PK.rar
HTC Athena Project 4.0 Platinum
In each and every configuration I tried to unlock my Ameo whit the same AthenaUnlocker 3.0 program, unfortunately always with the same result. I hoped that changing my SPL 1.2 to 3.5 could solve my problem.
Presently I have SPL 3.5, WM 6.1 Prof, radio 1.57, HTC Athena Project 4.0 Platinum on my Ameo (
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
, , ).
Last time as I started AthenaUnlocker, it could not recognize the model ID (, ), nevertheless it said that the 1st step was successful ()! Of course my Ameo still could not accept my Vodafone SIM card.
Finally I tried a last desperate attempt, and I put another Vodafone SIM card in my Ameo. Surprisingly it worked with it! The differences between the SIM cards can be seen on . (The card on the left is mine.) Maybe the unlocking procedure and AthenaUnlocker was successful from the beginning? Wow!!!
But I still have some question about this unlocking procedure!
1. The quality of the unlocking video of Agent Bignose (Athena,Ameo,HTC x7500 CID and NET Unlocker by Olipro Tutorial Video made by Agent Bignose) is not so good. I can not, or just partially can read the text. I can not hear anything. And have no idea, what he did on this video between 6:42 and 7:14! Is it a file loading or saving form? Why? I have never noticed it during the AthenaUnlocker procedure!
2. What can I do with this Invalid Model ID Error 244 (, )? Should I start to downgrade my Ameo, and start again from the basics?
3. What can I do with my unaccepted SIM card? Should I change it at Vodafone? Until now it worked perfectly with several other mobile phones.
Please help me to find the answers!
Many thanks in advance.
im having similar issues, seems noone replied with advice because people dont take the Advantage/Athena seriously anymore
good luck
Re OPs questions
!. cant't help
2. search for the fix for invalid model ID in the rom section
3.change the sim
David stewart ,if you have the last bootloader screen you need to apply the invalid modelid fix.look for the dedicated thread.
regards lakeman
Thanks lakeman, I finally got it sorted and now my HTC is working again.

Categories

Resources