Is it possible to flash Herald in bootloader mode using mtty or something similar?
Thank you
Christian
It might be, but your device still needs to be CID-unlocked, check this out:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
and this:
http://wiki.xda-developers.com/index.php?pagename=Herald_BootLoaderPassword
READREADREAD, and search the wiki and forums before asking
Hi Dutchman,
believe me, I am reading a lot about this to have my herald work again!
I have looked into links you wrote me.
I dont understand: with mtty I am able to set supercid on herald or only to display cid status?
Thank you.
Christian
Ok, just read the answer in other thread....
thank you.
There is no SuperCID for Herald, only for Hermes I believe, that link a few posts up is from the Hermes WIKI. But since your phone is CID locked you cannot ROM update the Herald. And when typing e.g. :
lnbs [pathname [StartAddr [Length [SkipOffset ["cp"]]]]]
you have to have your device CID unlocked. When you type set: 32 (1) you must not get the message at the end that looks like:
CMD55 failed
g_cKeyCardSecurityLevel = FF
The FF means that your device is CID locked, so you cannot use lnbs, so you cannot flash
chrispazz said:
Ok, just read the answer in other thread....
thank you.
Click to expand...
Click to collapse
Good luck then, I tried everything too (I own a brick too ) But i'll wait for the official WM6 ROM, I hope that i can flash with that one..
Ok, I cannot change CID in my device since it does not go forward after bootloader.
I am looking into a way to change the CID string inside the image (NBH).
Is it possible?
Bye
so The Dutchman, if we install wm6, it can possibly work?
cuz i have wm crossbow which afaik is wm6. it was leaked weeks ago but i cant install it cuz im not in windows
Po5tHuMaN said:
so The Dutchman, if we install wm6, it can possibly work?
cuz i have wm crossbow which afaik is wm6. it was leaked weeks ago but i cant install it cuz im not in windows
Click to expand...
Click to collapse
You cannot install when you are not cnnected with Active Sync - only if it is an OFFICIAL WM6 with RUU.
And when you have an official Wm6 you could share it??
When you want to install Wm6 you need the Os.nb and use any AsergWM6 to get the hand on the folder included - copy your WM6 Os.nb to the Asergfolder and then run update_rom.bat
Good luck. Hope you have an official ROM in your language - because you won´t be able to falsh another rom tthan the one in your country.
The ROM from HTC will come in 2-3 weeks. That was told from someone in a german forum who called the HTC support. Let´s hope it is real.
lol
Deleted - was the answer to the Spam post.
chrispazz said:
Ok, I cannot change CID in my device since it does not go forward after bootloader.
I am looking into a way to change the CID string inside the image (NBH).
Is it possible?
Bye
Click to expand...
Click to collapse
I honestly would not know, but you could give a try with HexEdit.. I do not know if this will work (well I think it will NOT ) but you could try
Try this one:
Yes, but I have to know which is the string to be found.
I have tried to get CID information from my phone using Mtty but it seems to not recognize info and task commands....
Christian
Neither did this work for me, and I have no idea IF and if there is, WHERE the CID-string is located.. Good luck! and if you find it, please post!
with getdevinfo I get a string but it does not seems to be any CiD information:
HTCSHERA10000>¬HTCE
also that string is not found in NBH image....
Hmm.. well like I said, I do not have any knowledge of this stuff.. I can't help you any further!
usualy is the CID 8 characters, It could be your CID is "HERA1000", but it seems more to be a hardware ID.
I don't know the getdevinfo program or command.
In the WWE ship ROM is the CID HTC__001 in the RUS ship rom is the CID HTC__A07. You can find it at the offset 0x1e0 in the nbh file.
Changing the CID in nbh file brakes the signature of the nbh file, so you can't use the nbh file to flash it to the device.
chrispazz said:
with getdevinfo I get a string but it does not seems to be any CiD information:
HTCSHERA10000>¬HTCE
also that string is not found in NBH image....
Click to expand...
Click to collapse
And usign NBHextract end NBHgen to have a signed NBH? Would it be ok?
Christian
chrispazz said:
And usign NBHextract end NBHgen to have a signed NBH? Would it be ok?
Christian
Click to expand...
Click to collapse
Just try
image is corrupted.....
Related
i tied to flash my herald os original italian with this method with UK OS
http://forum.xda-developers.com/showthread.php?t=290382
but my device dont wont to boot it stay blocked at
IPL 1.08.001
SPL 1.08.001
GSM 02.71.90
OS 1.8.0.0
please help me
can someone upload a shiped rom please italian if posible cause original os was italian
please help
I thought I did not unlock CID before flashing your Herald (it is HTC or Dopod or ???). Until now the best way to rescue it is bringing your PPC to the service.
But before doing this you can do some following action:
- Remove the battery for about 20 min and put it again.
- Hard reset.
its a htc
i will try battery solution and feed back
thanks
Got the same problem
I have the same probleme. is there any solution????????????? please post. mine herald doesn't start up. it get stuck when starting op.
Herald is no dead as the bootloader is still there.U need to flash the original OS by putting Herald into bootloader mode.It will b alive again.
yes but i didn't found the original rom anywere italian rom
and my device still bloked
please can someone upload italian os rom please
hey did you manage? cuz i have the same problem, maybe you can help me out
Hello....another one that need Italian ROM.
P4350 locked at boot....
Bye
chrispazz said:
Hello....another one that need Italian ROM.
P4350 locked at boot....
Bye
Click to expand...
Click to collapse
If italian is not absolutely necessary find an original English rom is simple...
or not?
johnny88 said:
If italian is not absolutely necessary find an original English rom is simple...
or not?
Click to expand...
Click to collapse
NOT, devices mostly get bricked because they are not CID unlocked. So the phone will only allow to flash the ORIGINAL language and ROM version etc.. good luck ya'll, by the way my Herald is dead too, so join the club
there is not a way to edit the image so to keep CID control away?
Is it possible to uncid the phone via USB bootloader mode?
Thanks
Christian
As far as I know (or what the XDA-dev forum can do) there is no utility for Removing and/or replacing the CID lock. There is imei-check.co.uk, but some people are having problems with that prog, and it can only be used when your device has OS running and ActiveSymc is connected, sorry pal
Hi,
I have the same problem than you,
but i have another Herald with the same rom as mine,
Is there any way for me to dump the rom from the first herald
and put it in the second?
Thx for your answers.
Herc.
hi,
I may be found a way to unbrick the herald
but i need to know the right command line to do it
please help.
cf: http://en.pdamobiz.com/en/forum/PDAforum_posts.asp?TID=151&PN=1
where i found the way to unbrick a pda using usb
Bye
Herc.
I think the codes e.g. d2s 80000000 02000000 are indeed only for the XDAII, i think the 80000000 is the location of the image storend on the ROM of the phone, so we need to have the codes for the locations of the images.
But i just thought of the flashing of Herald using the SD card.. I believe it can only flash SIGNED nbh files, but i'm not sure.. Could someone who's a die hard please help out, with this way we could unbrick devices with ROM dumps from someone else
Portuguese ROM of wm5 PLEASE!!
i had bricked my phone too..
there is somebody with portuguese version of WM5 please?
URGENT..
upload it for me please!
thanks
eagler said:
i had bricked my phone too..
there is somebody with portuguese version of WM5 please?
URGENT..
upload it for me please!
thanks
Click to expand...
Click to collapse
We can't just upload a ROM, it is very very hard to find! Try to search for yourself!It took me 3 google and torrent days to find a german ROM (accidentally)
when i was searching for the Dutch ROM. So search search search
The Dutchman said:
I think the codes e.g. d2s 80000000 02000000 are indeed only for the XDAII, i think the 80000000 is the location of the image storend on the ROM of the phone, so we need to have the codes for the locations of the images.
But i just thought of the flashing of Herald using the SD card.. I believe it can only flash SIGNED nbh files, but i'm not sure.. Could someone who's a die hard please help out, with this way we could unbrick devices with ROM dumps from someone else
Click to expand...
Click to collapse
Just for the info: i tried the original nbh from the german RUU to flash my terra from SD card. But no success. Still vender error
The Dutchman said:
I think the codes e.g. d2s 80000000 02000000 are indeed only for the XDAII, i think the 80000000 is the location of the image storend on the ROM of the phone, so we need to have the codes for the locations of the images.
But i just thought of the flashing of Herald using the SD card.. I believe it can only flash SIGNED nbh files, but i'm not sure.. Could someone who's a die hard please help out, with this way we could unbrick devices with ROM dumps from someone else
Click to expand...
Click to collapse
To papamopps: This was an old post, I gave it up long time ago to flash via SD-Card
The Dutchman said:
To papamopps: This was an old post, I gave it up long time ago to flash via SD-Card
Click to expand...
Click to collapse
Yes - But i hoped i could flash mine with the official RUU_sighned.nbh. BUT no chance.
lol
1. download ROM you'd like to flash
2. download dutty's good NBHTool
3. download upgrade tool
4. run nbhtool and extract windows.nb from nbh file that came with ROM
5.run upgraderom.bat and keep fingers crossed
6. do hardreset and enjoy
it should work with any ROM, but it upgrades only OS, not radio, ipl spl...
You must have async connection.(dont work thru bootloader)
Hi Are u sure this works..cos I hv tried several times on MDA compact III with no success at all, all the PDAMobiz versions
it worked with t-mo compact3 dutch v. to dopod shipped. try any other rom except pdamobiz. they are crap & helluva lot of people bricked pda with it
It really works
It really works.
Hello phsnake
I have a simlocked ROM on my Artemis (orange).
does this remove the simlock ?
PHONNY: dream again, if it'll be capable of SIMunlock i'll sell it for £1. no unfortunately it doesnt, it only hardcopy os image.it doesnt remove any locks, pwds.... so it can help ie if u buy orbit thru ebay with ?spanish? rom to put there english.....
nothing else. im sorry im not buzz_lightyear, or others. i only compiled something from other sources and explained it
I have upgraded to pdamobiz but would like to try another rom...will it work for me?
Thanks,
It works to me perfectly. Thanks very much.
---------------------------------------------------------------------------------
Ty jsi Slovák?
Also have PDAMobiz powermap 1.1.2 ROM installed on my HTC P3300 but would like a little cleaner ROM. As my device is locked and if this is method is really working, even at least for OS only, I have few questions:
1. Which English ROM is there that I can try and that is atleast AKU 3.01. Newer will be better.
2. ROM supports everything P3300 does - wifi + gps + .....
BTW, if I'll extract the windows.nb from nbh file, whats up with Extended ROM then .... as I understand it wont be included .... am I right. Best option then will be ..... ?
Tnx.
2 cosX: Asi ano ked to mam napisane v profile
2EazyVG:
1. READ WIKI - there are desc. of all ROMs avialable, including AKU versions
2. as above (it means as i remember only t-mo ROMs dont support WiFi - but even t-mo hw so if u have t-mo com.III forget WiFi /except for tmo NE i think)
btw. there will be no extrom, but U can extract all files from extrom thru winimage or so again read wiki
Tnx for your kind reply.
Tnx for your reply.
I tried this and get the following error:
ERROR: ITWriteDisk - An Internal Error occurred.
Tried it on my compact III using the extracted file from the shipped DOPOD rom.
Any ideas on this?
Thanks.
ukguy said:
I tried this and get the following error:
ERROR: ITWriteDisk - An Internal Error occurred.
Tried it on my compact III using the extracted file from the shipped DOPOD rom.
Any ideas on this?
Thanks.
Click to expand...
Click to collapse
The best way is to hard reset your device before upgrading it.
How can I find out CID of HTC p3300?
info 2 command of mtty doesnt't work.
I tried to flash extended rom and OS using NBHTOOL.
But the flash program said that rom was corrupt.
It works perfect big THX
firstly a BIG THANKS to phsnake letting us know this method to upgrade the os.I finally did it todat and flashe my Orbit to the Dopod rom,and thank God everything is well.Thanks once again.
i follow the steps exactly and when i run upgraderom.bat only intializinge and nothing happen
step 5..run upgraderom.bat and keep fingers crossed
what u means by keep fingers crossed ?
moustafatch said:
what u means by keep fingers crossed
Click to expand...
Click to collapse
It means just what it says, that you should keep your fingers crossed while upgrading. Personally, I allways put my left sock on before the right one, too.
Sorry, pun aside, it is just an English expression meaning 'lets hope for the best'. If you are not supersticious, then don't bother.
grun said:
It means just what it says, that you should keep your fingers crossed while upgrading. Personally, I allways put my left sock on before the right one, too.
Sorry, pun aside, it is just an English expression meaning 'lets hope for the best'. If you are not supersticious, then don't bother.
Click to expand...
Click to collapse
sorry
i still don't understand what u try to say
maybe my english is so bad
using pof herald beta tool,I decompiled c800 .nbh file,and rebuild it into a herald ruu file,successful write into my p4350,but badly,my herald bricked....
only can start with bootloader..
ipl remain: 4.17.0002(herald wm6 ipl)
but spl become: 1.09.0002(c800's spl)
I try to flash original rom that I used before,but it didn't work by ERROR300,and ppc screen stop at 0%. I TRY any ruu I can find,wm5 wm6,but the same ERROR300.
what can I do? is there any way to go?? or I have to change the flasher?
thanks all,plz help
You need to flash original rom matching your CID, this means the SAME language and the SAME operator/carrier ROM that was originally on your device when you bought it. After flashing this rom device will boot again.
pof said:
You need to flash original rom matching your CID, this means the SAME language and the SAME operator/carrier ROM that was originally on your device when you bought it. After flashing this rom device will boot again.
Click to expand...
Click to collapse
thank you.
but I really used the original rom.I used my IMEI and download original rom from the HTC.COM ,but it didn't work and remain the ERROR 300....it wm6 vision.
wm5 vision,I don't know which is my original rom,but I had try three of which I found on wiki. and also not working.
when I bought this,It display IPL 5.04.0002 SPL 5.04.0000 ,which rom can I use to fix???
plz give me one.thanks pof
by the way, which cid am I have now? htc p4350 or dopod c800?????
Where did you buy your phone? What type is it? Is it an actual HTC Herald? if you bought it from a cell carrier, maybe you can log into their site and download it there.
duprade said:
Where did you buy your phone? What type is it? Is it an actual HTC Herald? if you bought it from a cell carrier, maybe you can log into their site and download it there.
Click to expand...
Click to collapse
my phone is actually htc herald,no doubt of this,but I bricked it when I change the SPL IPL.... so the SPL had become wrong.
pof,,,,it really became no way out,I think I should go to the shop,and repair it with a new flasher.
I had tried all the language I can found on wiki and web. none of them can work.
RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe (can use beforetime)
EURORUU_Herald_HTC_NOR_5[1].4.409.2_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_DOPODASIA_WWE_1.7.707.3_02.69.90_Ship_R.exe
ruu_herald_htc_dan_5[1].4.403.2_4.1.13.34_02.79.90_ship.exe
RUU_Herald_HTC_GER_5[1].4.407.1_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_RUS_1.8.411.3_02.71.90_Ship.exe
RUU_Herald_HTC_RUS_5.4.411.2_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_SPA_5[1].4.412.1_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
HTC_P4350_ITA_4[1].17.408.2_4.1.13.44_02.94.90_Ship.exe
HTC_P4350_WWE_4[1].17.405.2_4.1.13.44_02.94.90_Ship.exe(can use beforetime)
so sad..
bring your device to a friends house, use his computer and try to flash the RUU, maybe its your computer that has a bug?
have you the correct drivers installed for usb connection?
itje said:
bring your device to a friends house, use his computer and try to flash the RUU, maybe its your computer that has a bug?
have you the correct drivers installed for usb connection?
Click to expand...
Click to collapse
thank you all the same,but I don't have any problem with what you said.
okay thats good
crappy stuff, bricking
itje said:
okay thats good
crappy stuff, bricking
Click to expand...
Click to collapse
yes,thanks.
I would like to know if I change the flasher,can I make the trouble shoot?
didn't think it was possible to brick a herald. def gonna b more carefull now
yangchao8115 said:
thank you.
but I really used the original rom.I used my IMEI and download original rom from the HTC.COM ,but it didn't work and remain the ERROR 300....it wm6 vision.
wm5 vision,I don't know which is my original rom,but I had try three of which I found on wiki. and also not working.
Click to expand...
Click to collapse
me too and tried many rom but fail erro 300 0% stop IPL AND SPL 1.08.001 . it was died and waiting for new unbrick way
wooo...cost me 400rmb to make it repaired,changed a flasher and I now the make my herald superCID . after repaired I used the SDcard to flash the wm6ruu (using the file named heraimg.nbh on sdcard) .whatever it's ok now thanks everyone
ok.do it in your ways.I don't need to do so many things and to be a thief even I don't own a herald.
happy now?
The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.
my herald p4350 got
spl 4.17.0000
and its not working for me either
I tried downgrade to wm5 then run the hard-spl, got as far as getting the "whitescreen" didnt get that with wm6 installed
But spl stayed same after.
sorry
cheers
papamopps said:
The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.
Click to expand...
Click to collapse
itje said:
my herald p4350 got
spl 4.17.0000
and its not working for me either
I tried downgrade to wm5 then run the hard-spl, got as far as getting the "whitescreen" didnt get that with wm6 installed
But spl stayed same after.
sorry
cheers
Click to expand...
Click to collapse
NO,it work,I am not using the one in his post.
Is the older one v4.20 for testing. what he released is v4.60
OLIpro start testing the hard spl with me,form v4.1 to v4.5 till my herald bricked he test with another guy and released the v4.6.I notice that oli maybe forgot to double up the nb file,it should be 1024large,and the nbh file should 1025 kb
canonyang_China said:
NO,it work,I am not using the one in his post.
Is the older one v4.20 for testing. what he released is v4.60
OLIpro start testing the hard spl with me,form v4.1 to v4.5 till my herald bricked he test with another guy and released the v4.6.I notice that oli maybe forgot to double up the nb file,it should be 1024large,and the nbh file should 1025 kb
Click to expand...
Click to collapse
a
when will it be available then?
itje said:
a
when will it be available then?
Click to expand...
Click to collapse
I don't know.you should ask olipro.
IF you are T-WING or VADEFONE or HTC 4350 no need to unlock.just use JumpSPL by pof to flash your SPLASH EXTROM OS,but don't do anything else.
JUMPSPL,jump into 0x10000000,then flash with ROMUpdateUtility.exe to flash NBH file.
NBH file can make youself by using HTCRT.exe.
SPLASH file can make youself by using SplashScreen.exe
EXTROM you can edit it with winimage.
cheer.
canonyang_China, you seem to be a smart cat with the XDA's. Heres my problem
I flashed my German XDA Terra (Herald) from TOuchIt 1.1 to 2.0 and doing so I briked my device.
I tried the HArd SPL, nothing worked.
Whenever i want to Flash, I get into bootloader mode, then at 2% the device restarts and I get INvalid Vendor ID or when I try the Hard SPL I get "Corrupted Image"
What can I do to unbrick my device since there is no RUU for the XDA terra WM6
Please help !!!!!
Help Link Doesnt Work
The Link You Posted, I Try To Open It But It Doesnt Work.
Please I Need Your Help.
Can You Please Give Me An Other Link
Thanks
thanks!!!!great work!i think very much people want to use it ~~~~~~~~~`
lxa786 said:
The Link You Posted, I Try To Open It But It Doesnt Work.
Please I Need Your Help.
Can You Please Give Me An Other Link
Thanks
Click to expand...
Click to collapse
use proxy http://www.ok-proxy.com/ enter the link into it.
canonyang_China, you seem to be a smart cat with the XDA's. Heres my problem
I flashed my German XDA Terra (Herald) from TOuchIt 1.1 to 2.0 and doing so I briked my device.
I tried the HArd SPL, nothing worked.
Whenever i want to Flash, I get into bootloader mode, then at 2% the device restarts and I get INvalid Vendor ID or when I try the Hard SPL I get "Corrupted Image"
What can I do to unbrick my device since there is no RUU for the XDA terra WM6
Please help !!!!!
Click to expand...
Click to collapse
I am sorry,as I said in the post.I don't know how to unbrick,especially like O2,c800,c858.as they have no ruu.
Hi
I wud request if u can read my opinion on lower bootloader in the Hard SPL thread.I hv been trying and trying, but failing,untill POF released Jump SPL.
Just as an information, lower bootloader Heralds shd b upgraded to higher bootloader first using Jump SPL.
Pls do not flash a part of ROM...viz only OS or only radio..pls flash the complete ROM and yr herald will boot with the new OS and higher bootloader.
Then one can use aserg techniques to flash OS.nb..If one flashes OS.nb in lower bootoader, one will get Radio Error.So it is important to get higher bootloader first.
With Jump SPL, also, pls do not try to flash any part of ROM, just flash a full NBH, else it will not boot yr Herald.
Hv tried above with 10 heralds(Dopod C800 with BL 1.09)
I hope this helps
canonyang_China said:
Dear OLIPRO:
Click to expand...
Click to collapse
hdubli said:
Hi
I wud request if u can read my opinion on lower bootloader in the Hard SPL thread.I hv been trying and trying, but failing,untill POF released Jump SPL.
Just as an information, lower bootloader Heralds shd b upgraded to higher bootloader first using Jump SPL.
Pls do not flash a part of ROM...viz only OS or only radio..pls flash the complete ROM and yr herald will boot with the new OS and higher bootloader.
Then one can use aserg techniques to flash OS.nb..If one flashes OS.nb in lower bootoader, one will get Radio Error.So it is important to get higher bootloader first.
With Jump SPL, also, pls do not try to flash any part of ROM, just flash a full NBH, else it will not boot yr Herald.
Hv tried above with 10 heralds(Dopod C800 with BL 1.09)
I hope this helps
canonyang_China said:
Dear OLIPRO:
Click to expand...
Click to collapse
MAYBE that a way.I know that the spl ipl must be suit for the radio or it will not boot,will gone black screen.
I do want to confirm something.
first,you mean flash high SPL IPL like WM6 one totally NBH via Jumpspl?
second,Jumpspl to flash,if you succeed.the device will boot normally?
third,after you flash,which cid do you have?(check in MTTY or try to flash the ruu which you get the NBH)
fourth,if I want to try,maybe I would like to make a nbh with hard-spl to flash.after all,it cid unlock,and we can do something more if it failed.
cheer
Click to expand...
Click to collapse
papamopps said:
The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.
Click to expand...
Click to collapse
My device is same to your!(O2 terra)It was bricked!But it can work now after changed the flasher!AND canonyang make me Hard-spl,now I am using WM6.
yangyqh said:
My device is same to your!(O2 terra)It was bricked!But it can work now after changed the flasher!AND canonyang make me Hard-spl,now I am using WM6.
Click to expand...
Click to collapse
Hey, I have a bricked Terra too, is there any way I can fix it? I get into Bootloader, I had WM6 before, Updated to TouchIt 1.1 then when I tried to Update to TouchIt 2.0 It bricked.
Any ideas?
When I leave it load it will not go past the O2 Bubble screen.
When I try to update it only goes to 2% and then I get invalid vendor ID.
Please advise Me!!
Thank you!!
canonyang_China said:
use proxy http://www.ok-proxy.com/ enter the link into it.
I am sorry,as I said in the post.I don't know how to unbrick,especially like O2,c800,c858.as they have no ruu.
Click to expand...
Click to collapse
I need help on htc P4350 it don;t power up only goes to boot-loader
ipl 1.08.00001
spl 1.08.00001
i need help to unbrick that if you help me i am thankfull to you i flashed all roms but stops saying invalid update tool.
please help me
zubi1984 said:
I need help on htc P4350 it don;t power up only goes to boot-loader
ipl 1.08.00001
spl 1.08.00001
i need help to unbrick that if you help me i am thankfull to you i flashed all roms but stops saying invalid update tool.
please help me
Click to expand...
Click to collapse
If you are htc p4350,don't worry about anything.follow my steps:
1,Take off your battery to get you SN.
2,GO TO www.htc.com
3,Mouse action to E-CLUB icon.
4,Join is member with your SN,then login on.
5,You will see "Phone Software Updates" follow it and you will get a Offical RUU cid suit your device.
6,After downloaded,RUN the RUU and your device will back to life.your IPL SPL will change into 4.17.your os will be wm6.
7,if you can't find anything in "Phone Software Updates".please try all the WM6 RUU for HTCP4350 in the first post to find one suit for you cid.try the WWE one first.
cheer
exxi said:
Hey, I have a bricked Terra too, is there any way I can fix it? I get into Bootloader, I had WM6 before, Updated to TouchIt 1.1 then when I tried to Update to TouchIt 2.0 It bricked.
Any ideas?
When I leave it load it will not go past the O2 Bubble screen.
When I try to update it only goes to 2% and then I get invalid vendor ID.
Please advise Me!!
Thank you!!
Click to expand...
Click to collapse
I think you must first change ROM
Want to upgrade Hard SPL must be able to enter the system！
Tell the people around you：Taiwan is a province of China！！！
cheer for you
yangyqh said:
I think you must first change ROM
Want to upgrade Hard SPL must be able to enter the system！
Click to expand...
Click to collapse
Yes, right now, there is no RUU for the terra, so he has to send it to O2 for repair.
edzilla said:
Yes, right now, there is no RUU for the terra, so he has to send it to O2 for repair.
Click to expand...
Click to collapse
yep,you are right
Hi,
I've just bought my wife a Herald (P4350) here in Moscow. It comes with Windows Mobile 5 in Russian and we really need to change it to English. I've been referred here as the best place for help on how to do this but looking around this forum there is a huge variety of information that is quite confusing for the noob (which I am for this type of thing!)
Can anyone tell me how to change the ROM? I don't know if it's cid locked or anything else! You'll need to tell me how I can check, if you don't mind. It's just branded as HTC. I don't mind if the ROM is WMM 5 or 6 as long as it's in English.
Thanks!
Upgrade your phone with the official WM6 HTC ROM. Then if it's still not in english, use any of our custom ROMs as they're almost all in English.
IF you decide to HardSPL, please take note of the SPL version you have or you will brick your device.
ivanmmj said:
Upgrade your phone with the official WM6 HTC ROM. Then if it's still not in english, use any of our custom ROMs as they're almost all in English.
IF you decide to HardSPL, please take note of the SPL version you have or you will brick your device.
Click to expand...
Click to collapse
Thanks for the advice ivanmmj. The official update is in Russian as this is the only option it gives to download. Can you please tell me what HardSPL means? I notice other people mentioning it but I don't know what it means.
[edit] It seems that HardSPL is something that provides a more foolproof way of changing ROMS. As I am a complete newbie at this, I am worried of trying something that will render my wife's phone useless! She needs it for work.
Is it possible to upgrade my ROM to the official English WM6 ROM found in the Herald WIKI of this site? Will I have to unlock the CID?
You cannot use the official WM6 update to get it in English,
you will get a Invalid Vendor ID error, You should flash the official
WM6 RUssian first, then download USPL.
Now Download the desired ROM (pick one you like there are enough)
And always read instructions!!
USPL
RUU Russian
Read the Instructions in the USPL folder,
Put the downloaded ROM in .nbh format in the RUU folder.
If you have questions please post before just trying,
you don't want a Brick like many of us (including me) have owned
auricle said:
Is it possible to upgrade my ROM to the official English WM6 ROM found in the Herald WIKI of this site? Will I have to unlock the CID?
Click to expand...
Click to collapse
No you can't, Invalid Vendor ID error will occur.
If you really want Hrd-SPL,
Upgrade to WM6 Russian first, Hard-SPL needs an SPL higher than4.xx
You can try Hard-SPL indeed, but flash official WM6 first(!!!)
Hard-SPL
*Upload by papamopps
Thanks very much for the info Dutchman! It's becoming clearer.
Where can I find information about each ROM and what they contain? There isn't a WIKI page for them yet.
auricle said:
Thanks very much for the info Dutchman! It's becoming clearer.
Where can I find information about each ROM and what they contain? There isn't a WIKI page for them yet.
Click to expand...
Click to collapse
http://rapidshare.com/users/5EWZ4
every official rom....
Upgrade to the russian WM6 first, before HardSPLing and verify that you have the correct SPL version before you start.
Thank you all kindly for your help. I'll let you know how I get on.