1. download ROM you'd like to flash
2. download dutty's good NBHTool
3. download upgrade tool
4. run nbhtool and extract windows.nb from nbh file that came with ROM
5.run upgraderom.bat and keep fingers crossed
6. do hardreset and enjoy
it should work with any ROM, but it upgrades only OS, not radio, ipl spl...
You must have async connection.(dont work thru bootloader)
Hi Are u sure this works..cos I hv tried several times on MDA compact III with no success at all, all the PDAMobiz versions
it worked with t-mo compact3 dutch v. to dopod shipped. try any other rom except pdamobiz. they are crap & helluva lot of people bricked pda with it
It really works
It really works.
Hello phsnake
I have a simlocked ROM on my Artemis (orange).
does this remove the simlock ?
PHONNY: dream again, if it'll be capable of SIMunlock i'll sell it for £1. no unfortunately it doesnt, it only hardcopy os image.it doesnt remove any locks, pwds.... so it can help ie if u buy orbit thru ebay with ?spanish? rom to put there english.....
nothing else. im sorry im not buzz_lightyear, or others. i only compiled something from other sources and explained it
I have upgraded to pdamobiz but would like to try another rom...will it work for me?
Thanks,
It works to me perfectly. Thanks very much.
---------------------------------------------------------------------------------
Ty jsi Slovák?
Also have PDAMobiz powermap 1.1.2 ROM installed on my HTC P3300 but would like a little cleaner ROM. As my device is locked and if this is method is really working, even at least for OS only, I have few questions:
1. Which English ROM is there that I can try and that is atleast AKU 3.01. Newer will be better.
2. ROM supports everything P3300 does - wifi + gps + .....
BTW, if I'll extract the windows.nb from nbh file, whats up with Extended ROM then .... as I understand it wont be included .... am I right. Best option then will be ..... ?
Tnx.
2 cosX: Asi ano ked to mam napisane v profile
2EazyVG:
1. READ WIKI - there are desc. of all ROMs avialable, including AKU versions
2. as above (it means as i remember only t-mo ROMs dont support WiFi - but even t-mo hw so if u have t-mo com.III forget WiFi /except for tmo NE i think)
btw. there will be no extrom, but U can extract all files from extrom thru winimage or so again read wiki
Tnx for your kind reply.
Tnx for your reply.
I tried this and get the following error:
ERROR: ITWriteDisk - An Internal Error occurred.
Tried it on my compact III using the extracted file from the shipped DOPOD rom.
Any ideas on this?
Thanks.
ukguy said:
I tried this and get the following error:
ERROR: ITWriteDisk - An Internal Error occurred.
Tried it on my compact III using the extracted file from the shipped DOPOD rom.
Any ideas on this?
Thanks.
Click to expand...
Click to collapse
The best way is to hard reset your device before upgrading it.
How can I find out CID of HTC p3300?
info 2 command of mtty doesnt't work.
I tried to flash extended rom and OS using NBHTOOL.
But the flash program said that rom was corrupt.
It works perfect big THX
firstly a BIG THANKS to phsnake letting us know this method to upgrade the os.I finally did it todat and flashe my Orbit to the Dopod rom,and thank God everything is well.Thanks once again.
i follow the steps exactly and when i run upgraderom.bat only intializinge and nothing happen
step 5..run upgraderom.bat and keep fingers crossed
what u means by keep fingers crossed ?
moustafatch said:
what u means by keep fingers crossed
Click to expand...
Click to collapse
It means just what it says, that you should keep your fingers crossed while upgrading. Personally, I allways put my left sock on before the right one, too.
Sorry, pun aside, it is just an English expression meaning 'lets hope for the best'. If you are not supersticious, then don't bother.
grun said:
It means just what it says, that you should keep your fingers crossed while upgrading. Personally, I allways put my left sock on before the right one, too.
Sorry, pun aside, it is just an English expression meaning 'lets hope for the best'. If you are not supersticious, then don't bother.
Click to expand...
Click to collapse
sorry
i still don't understand what u try to say
maybe my english is so bad
Related
Can I upgrade my devise to WM2003 4.00.11 using ROM Kitchen and .exe file??????:
My current status is:
ROM: 4.00.01
Fadyco said:
Can I upgrade my devise to WM2003 4.00.11 using ROM Kitchen and .exe file??????:
My current status is:
ROM: 4.00.01
Click to expand...
Click to collapse
yes...the only versions you cant upgrade or downgrade using the exe file is Tmobile ROMS
the 4.00.10 and 4.00.16
the others can upgrade using exe...
Hi ...
I cooked and downloaded a ROM 4.00.11 and tried to upgrade a Qtek 1010 ... the XDA restarts and and error message tells that "Can't open USB/com port ......". Some one here said it's normal and that I have to redo it many times. I tried it over 10 times and the same is still happening.
Do I miss something ??
Thanks.
Latest ...
I tried to cook the new ROM as .nb1 file and used the XDAtools from the kitchen ... same result
Could there be any ROM protection on my device ???? :x
Biso007 said:
Latest ...
I tried to cook the new ROM as .nb1 file and used the XDAtools from the kitchen ... same result
Could there be any ROM protection on my device ???? :x
Click to expand...
Click to collapse
Hi Biso007,
Look at the IDIOTS GUIDE at:
http://www.xda-developers.com/forum/viewtopic.php?t=3171
and follow the instructions thoroughly one by one and you can't go wrong, it did work for me, I was in the same situation.
:wink:
Hi Ritmo ...
Thanks for guiding me to the IDIOTS guide :lol:
May be I should have mentioned that I wanted to use the easy way ... without the headache of SD cards and BootLoader !! .... :roll:
I thought the EXE method was made for the IDIOTS like me ... but seems I need more learning and money to be become an IDIOT
Any more help plz ......
Biso007 said:
Hi Ritmo ...
Thanks for guiding me to the IDIOTS guide :lol:
May be I should have mentioned that I wanted to use the easy way ... without the headache of SD cards and BootLoader !! .... :roll:
I thought the EXE method was made for the IDIOTS like me ... but seems I need more learning and money to be become an IDIOT
Any more help plz ......
Click to expand...
Click to collapse
It's dead simple... I was scared like you are, but if you follow the instructions as they are, you will see that you are not any more of an IDIOT than the rest of us.
In the begining I only used to play with .EXE files, there was/is no way out, so I had to resign myself to the fact of going to the next step, and blieve you me, if you do as the IDIOTS guide, not as bad as you may think.
The SD card and the Reader are not that expensive...
:wink:
Hi Ritmo ...
Does it mean to totally give up the EXE method :?:
Now I wonder if it did ever work for any one here ... or it works in certain conditions ??
The .EXE ones only works for NON T-Mobile ROMs. If by 'mistake' you get a T-Mobile ROM, then you have got to use the .NBF or .NB1 upgrade/downgrade. After that, if you download NON T-Mobile ROMs than you can carry on palying with the .EXE ones...
Hope it helps.
:wink:
ritmo-unido said:
The .EXE ones only works for NON T-Mobile ROMs. If by 'mistake' you get a T-Mobile ROM, then you have got to use the .NBF or .NB1
Click to expand...
Click to collapse
actually, I still have my original ROM 3.18 as I couldn't upgrade in any way
Now I'm thinking to cook the 3.17 one ... may it will work and be the base for further upgrade ... any advice ???
The programmers of www.pdamobiz.com in Thailand have successfully unlocked the CID for HTC Prophet SPL 2.xx. More information is available at:
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=437&PN=1&TPN=1
Wow, that's a very good news indeed
Now I just have to find an Orange France M600 rom to test if it work
I'll test with the Jamin one also...
If someone can upload the M600 french rom, i would be very grateful, thanks!!
Does anyone succefully download the unlock program? the connexion is very very slow on their server (I'm downloading in Bytes/sec :shock: instead MBytes)...
If yes, it would be nice to upload it on the ftp server, thanks!!
cedrick said:
Does anyone succefully download the unlock program? the connexion is very very slow on their server (I'm downloading in Bytes/sec :shock: instead MBytes)...
If yes, it would be nice to upload it on the ftp server, thanks!!
Click to expand...
Click to collapse
Thanks to someone that uploaded the file. It's here:
ftp://xda:[email protected]/Prophet/pdamobiz.com_downgrade_and_unlockcid.rar
Actually it was there ftp://xda:[email protected]/Uploads/Prophet/pdamobiz.com_downgrade_and_unlockcid.rar :wink:
Not sure what happenned to the Prophet folder on the ftp, I though there were more files inside yesterday :roll:
Thanks a lot anyway
Im probably missing something here, but isnt it enough just using Machinagod great No ID crack when upgrading a ROM?
Just copy it to the nbf files and run it, works like a charm.
So, what is the difference with this application?
I don't know the app you're talking about, but we're talking here about downgrading, not upgrading a rom...
Moreover, does your application remove CID on prophet with SPL 2.xx ?
well, should have tested that before speaking...
doesn't work for me, once run the downgrading program, I soft reset but the device stay blocked on splah and I can't connect back to active sync to run the unlock program... too bad, that seemed to be a good way to downgrade rom :?
...great work! just used it on my qtek s200 that i've accidently flashed with the latest o2 germany rom without cid-unlocking before. now i can really put any rom on it
thanks and cheers, lutz
did i work? what happen when you soft reset after running the downgrade tool?
thx !
everything worked as it should, no idea why it didn't work for you...
cheers, lutz
Ok thanks,
BTW, ignore my PM didn't though you'd reply so fast :wink:
do a hardreset and pray that you get it connected to active sync, buddy...
as said above, it worked exactly as they've said it will. i have no idea what went wrong for you so my help is poor...
cheers, lutz
Actually I tried various time... I'm on the last Dopod rom, i started as said, then when I reboot, the device is stuck on dopod splash screen...
So I have to go into the boot loader in order to reflash the dopod rom I have... at least I can do that and keep my S200 working
Maybe this doesn't work with the last Dopod rom, but at least it worked for others
we need a Thai to Eng. translation to understand the problem
Unfortunately my device can not continue with second step. After I softreset it; the device freezes. Neither hardresetting, nor putting in bootloader and continuing with hard or soft reset helps. I reflashed the latest Dopod ROM and continued to use it.
I can not read Thai language but from the original discussion (not english but in Thai language) I see that a number of people are having the same problem. I also understand that the suggested solution works for some others.
The english version is not a full translation of the original discussion; translation of a lot of answers are missing.
We need the help of our Thai friends to understand what is going on.
I guess that it works on certain rom version, if you've the dopod one like I had, then it confirm that this method is useless with the last dopod rom...
But we have confirmation it work with other roms... maybe it's not really working on SPL 2... roms :?
I took a look on the Thai version, now it's clear that it doesn't work on the last dopod rom SPL 2.15 !!!!!!!
cedrick - Sorry you have failed to CID-unlock your Prophet and congratulations to lutzh that has succeeded.
From the Thai version of this utility, many people could unlock their devices but some did fail to do that. Not sure only the SPL 2.15 or not that couldn't be unlocked but at least 2 people claimed that their devices are SPL 2.15.
The website programmers are still trying to investigate and find the solution to help people who failed. Please hang on. Good luck!
@cedrick:
Yeah my SPL is 2.15
@Khuanchai:
Thank you for information. Hope to hear better news.
Cheers.
No problems about the failure, that's already nice to see tools like that that can help a bunch of people.
Now I hope it will also work on the dopod rom as I really liked it and I would like to update my prophet with this rom. But I prefer to wait until there's a way to get back to whatever rom :wink:
Hi Guys,
I have searched the forum, but no solution for my problem. I had a dutch htc 3300. My device is not unlocked. I have tried to flash the pdamobiz rom to my device and since can`t get by the splash screen. STUPID!!! I can get into the bootloader but I need the original dutch rom to flash. Can anybody upload please? Cannot do anything with it now.
If I am right, there is no way to unlock the device in this situation!?!
Any suggestions?
thanks
Exact same issue a couple of hours ago.. see my Help Desperate post below this one.. it worked for me.
how
What exactly did you do? I did not understand your thread. How did you unlock your device?
What is meant by this:
not your flashing one, but clean bootloader, by hardreset followed by record and reset
thanks
Wait
Hi Guys,
Is there not a solution? Do I have to wait for HTC to release a dutch rom upgrade? I still don`t understand why the Pdabiz rom killed my device?
Please help me out
thanks
hakanos said:
What exactly did you do? I did not understand your thread. How did you unlock your device?
What is meant by this:
not your flashing one, but clean bootloader, by hardreset followed by record and reset
thanks
Click to expand...
Click to collapse
That refers to the flashing Tmobile boot screen that shows and stays.. it wouldn't boot any further.
If you press record (left top side of your device, small button above the volume slider) and hold this while pressing reset you will get into the real bootloader mode (a tri-colour screen) that allows you to do a USB connect.
Now go to: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
and download the following ROM for your T-Mobile device:
T-Mobile English T-MOB005 ARTE***** 1.13.110.1 9/22/06 1.13.110.101 1.13.0000 02.49.90 4.1.13.25 (direct link: ftp://xda:[email protected]/art_tmouk_11311001_024990_wwe_ship.exe)
Just run this exe while in that bootloader (tri-colour) mode.
Good luck, that did it for me.
Not T-mobile
Hi,
Thanks for your reply. But my device is not T-mobile branded. It is a original HTC.
Tried your method but does not work.
Will have to find someone with a dutch rom I think
I am out of ideas
*bump
I have the same problem.. I can get into bootloader screen, but I can't find a T-Mobile ROM to flash.
Anyone with a working link to a T-Mobile ROM? The link was removed from this page..
Thnx
Pyth said:
I have the same problem.. I can get into bootloader screen, but I can't find a T-Mobile ROM to flash.
Click to expand...
Click to collapse
What language was your original T-Mobile in? I presume Dutch since you live in Holland. Unless you had your phone unlocked before you tried to flash it, you can only restore the same ROM. Unfortunately there is no Dutch ROM as far as I know.
So how did you solve it? Thought you had this problem 2 months ago..
And yes the original language was Dutch..
Im contacting T-Mobile right now, and they should have a NL version but the site is down atm.
Pyth said:
So how did you solve it? Thought you had this problem 2 months ago.. And yes the original language was Dutch..
Im contacting T-Mobile right now, and they should have a NL version but the site is down atm.
Click to expand...
Click to collapse
Personally I never tried to flash my phone, maybe you read an answer from me to someone with a similar problem.
T-Mobile can provide you with the correct ROM, but I don't think it can be found at their site. Well, it was not there last time I looked anyway.
grun said:
Personally I never tried to flash my phone, maybe you read an answer from me to someone with a similar problem.
T-Mobile can provide you with the correct ROM, but I don't think it can be found at their site. Well, it was not there last time I looked anyway.
Click to expand...
Click to collapse
Hmm you were right.. it was somebody else.
The ROM should be avaible @ http://www.t-mobile.nl/software but that site isn't working at the moment. They told me that the only thing I could do now, is going to a T-Mobile shop and let them send it for a fix.
So my hopes are on a PM that I send to the author of this post. Perhaps he's able to give me the original ROM.
Pyth said:
So my hopes are on a PM that I send to the author of this post. Perhaps he's able to give me the original ROM.
Click to expand...
Click to collapse
Mmm, I think he was looking for a T-Mobile ROM in the English language, so you cannot use that because it has a different signature. Unless you're phone is unlocked?
nope..
But I can give it try anyway..
Want to use the fixing by T-Mobile as a last resort..
Pyth said:
Want to use the fixing by T-Mobile as a last resort..
Click to expand...
Click to collapse
I just checked their Dutch site and it is up and running again. Hate to disappoint you, but there is no original complete Dutch ROM for download, only an update with a Blackberry Client.
You may find a ROM for a MDA III though, be careful not to use that one because that is a different model, also known as Blue Angel. It has a sliding mechanism and a keyboard for example.
grun said:
I just checked their Dutch site and it is up and running again. Hate to disappoint you, but there is no original complete Dutch ROM for download, only an update with a Blackberry Client.
You may find a ROM for a MDA III though, be careful not to use that one because that is a different model, also known as Blue Angel. It has a sliding mechanism and a keyboard for example.
Click to expand...
Click to collapse
Weird.. I still get an error on this site: http://www.t-mobile.nl/software/
Pyth said:
Weird.. I still get an error on this site: http://www.t-mobile.nl/software/
Click to expand...
Click to collapse
https://www.t-mobile.nl/zakelijk/media/download/BA_TMNL_14200_119_11300_Ship.exe
MDA III Update...
I also have my P3300 f*cked up...
Thnx for the link!
But this doesn't work if your MDA is in bootloader.. this program needs an ActiveSync connection
Hmm...
I'm thinking about sending it to HTC voor repair
I'm going to do one more thing and that's is backup the OS
from a friend that also had a HTC P3300 NL and hope to make
a ROM file...
So let's hope that will work!
But if you made a backup you still need to connect to your MDA while it's in bootloader...
If anyone knows how to do that...
Yep i know... i've tried everything! with mtty.exe and nothing
works.
See below the reaction from IMEI-CHECK:
Hello,
sorry to tell you the BAD NEWS but you REALLY can not fix the phone yourself.
You only have 2 options to get the phone fixed:
1) you find the "ORIGINAL HTC P3300 DUTCH ROM Update" and flash the device from bootloader (most likely not available)
2) you send the phone to repair
Sorry to tell you but there are REALLY REALLY REALLY REALLY REALLY no other options.
The mistake from you was to use the risky ROM update without CID unlocking the phone BEFORE.
Regards,
IMEI-CHECK Team
----- Original Message -----
Hello,
I've a broken HTC P3300 (Dutch). The story is this:
It has no sim-lock but it does have a CID-Lock.
I update my Dutch HTC P3300 to this ROM:
- PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap
and that whent great. Everything worked. After this i saw another ROM and i installed it:
- Tom HTC Artemis Rom v2.00.01 PDAVIET
and the update whent fine, but after hard reset it stops at the HTC Logo with the version numbers.
I only can get to the bootloader and do some thing with hyperterminal (mtty.exe).
When i want to install this ROM:
- HTC_1.12.405.01_026790_WWE_SHIP
it says that i get this error after 2%:
ERROR [244] WRONG MODEL ID
When i use art_tmouk_11311001_024990_wwe_ship.exe it says i have the WRONG VENDER ID.
I have made a backup with aWizard and have these files:
-HTCLogo.nba
-OS.nba
-Radio.nba
-Splash.nba
-boot.rgu
and a folder ExtRom that is empty...
Can you help me with this? I hope so!!
Thanks for your help!
Version numbers:
IPL 1.12.0001
SPL 1.12.0000
Is it possible that some "smart" person who owns an Orbit (UK model) extracts its ROM and makes is possible to load it to another Orbit in Bootloader mode?
Or can someone tell me how to clear the CID in Bootloader mode, so I can flash my Orbit with a Dopod or p3300 rom.
FYI: My Orbit can only boot on Bootloader mode because I was stupud to flas it with the PDAMobiz rom.....
Gr.
M.
U can make your Artemis(orbit) superCID only with IMEICHECK.co.uk for 20GBP. But u can flash there tmouk rom i guess even if its still cid locked. this rom is in one of threads arte-unlock,upgrade. BTW ibet u tryied pdamobiz customized. Im I right? this one ****ing rom has some big troubles, try lite or powermap version
Υes i agree... Try Lite or PowerMap Version... The customized is not working at least at most of us... For the T-mobile ROM search this thread
I know about Imei-check solution, but it can only be done when your Orbit/Artemis functional. Mine isn't. Is stops/hangs at het splashscreen.
My only hope is when either Imei-ckeck or some other programmers software can do its job in the Bootloader menu.
Or O2 UK / Germany has to release a Rom specific for the Orbit so that you do'nt get the message "bad vendor-id"
BTW I messed my Orbit up with the Powermap rom...
try tmouk rom. it might work even w/o ur pda beeing SuperCID. Better try first. It works directly from bootloader
Thanks for the advice, tried it, but after 3% it says "invalid vendor -id".
I've heard that there's a dopod test-rom out there that does'nt verify the vendor id. Who knows where to download it???
Or can I use a "cracked" ROMUpdateUtility.exe?? Is it already out there??
did U use this one:art_tmouk_11311001_024990_wwe_ship?
yes thats the one. I used:
ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe
art_tmouk_11311001_024990_wwe_ship.exe
ART_HTCWWE_11240501_026790_WWE_Test.exe
So I guess only one thing U can do is to send it to Imeicheck, they'll use jtag. or try 2 wait untill there will any free solution
Hi Guys,
I am just waiting for my German Orbit to arrive and I would like to switch to English ROM as soon as possible. I cannot find any more the FTP site with all the rom stored in, can you give me an hint on where to find such English ROMS for the Orbit?
Thanks a lot for your support.
Peppepep
using pof herald beta tool,I decompiled c800 .nbh file,and rebuild it into a herald ruu file,successful write into my p4350,but badly,my herald bricked....
only can start with bootloader..
ipl remain: 4.17.0002(herald wm6 ipl)
but spl become: 1.09.0002(c800's spl)
I try to flash original rom that I used before,but it didn't work by ERROR300,and ppc screen stop at 0%. I TRY any ruu I can find,wm5 wm6,but the same ERROR300.
what can I do? is there any way to go?? or I have to change the flasher?
thanks all,plz help
You need to flash original rom matching your CID, this means the SAME language and the SAME operator/carrier ROM that was originally on your device when you bought it. After flashing this rom device will boot again.
pof said:
You need to flash original rom matching your CID, this means the SAME language and the SAME operator/carrier ROM that was originally on your device when you bought it. After flashing this rom device will boot again.
Click to expand...
Click to collapse
thank you.
but I really used the original rom.I used my IMEI and download original rom from the HTC.COM ,but it didn't work and remain the ERROR 300....it wm6 vision.
wm5 vision,I don't know which is my original rom,but I had try three of which I found on wiki. and also not working.
when I bought this,It display IPL 5.04.0002 SPL 5.04.0000 ,which rom can I use to fix???
plz give me one.thanks pof
by the way, which cid am I have now? htc p4350 or dopod c800?????
Where did you buy your phone? What type is it? Is it an actual HTC Herald? if you bought it from a cell carrier, maybe you can log into their site and download it there.
duprade said:
Where did you buy your phone? What type is it? Is it an actual HTC Herald? if you bought it from a cell carrier, maybe you can log into their site and download it there.
Click to expand...
Click to collapse
my phone is actually htc herald,no doubt of this,but I bricked it when I change the SPL IPL.... so the SPL had become wrong.
pof,,,,it really became no way out,I think I should go to the shop,and repair it with a new flasher.
I had tried all the language I can found on wiki and web. none of them can work.
RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe (can use beforetime)
EURORUU_Herald_HTC_NOR_5[1].4.409.2_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_DOPODASIA_WWE_1.7.707.3_02.69.90_Ship_R.exe
ruu_herald_htc_dan_5[1].4.403.2_4.1.13.34_02.79.90_ship.exe
RUU_Herald_HTC_GER_5[1].4.407.1_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_RUS_1.8.411.3_02.71.90_Ship.exe
RUU_Herald_HTC_RUS_5.4.411.2_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_SPA_5[1].4.412.1_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
HTC_P4350_ITA_4[1].17.408.2_4.1.13.44_02.94.90_Ship.exe
HTC_P4350_WWE_4[1].17.405.2_4.1.13.44_02.94.90_Ship.exe(can use beforetime)
so sad..
bring your device to a friends house, use his computer and try to flash the RUU, maybe its your computer that has a bug?
have you the correct drivers installed for usb connection?
itje said:
bring your device to a friends house, use his computer and try to flash the RUU, maybe its your computer that has a bug?
have you the correct drivers installed for usb connection?
Click to expand...
Click to collapse
thank you all the same,but I don't have any problem with what you said.
okay thats good
crappy stuff, bricking
itje said:
okay thats good
crappy stuff, bricking
Click to expand...
Click to collapse
yes,thanks.
I would like to know if I change the flasher,can I make the trouble shoot?
didn't think it was possible to brick a herald. def gonna b more carefull now
yangchao8115 said:
thank you.
but I really used the original rom.I used my IMEI and download original rom from the HTC.COM ,but it didn't work and remain the ERROR 300....it wm6 vision.
wm5 vision,I don't know which is my original rom,but I had try three of which I found on wiki. and also not working.
Click to expand...
Click to collapse
me too and tried many rom but fail erro 300 0% stop IPL AND SPL 1.08.001 . it was died and waiting for new unbrick way
wooo...cost me 400rmb to make it repaired,changed a flasher and I now the make my herald superCID . after repaired I used the SDcard to flash the wm6ruu (using the file named heraimg.nbh on sdcard) .whatever it's ok now thanks everyone