Hi! Today, a friend has given me that smartphone with a "litlle" problem. When I try to run it, it doesn't pass of the HTC logo. I tried all, softreset, hardware reset, etc... One thing, that I think is "curious" is that when I try to start it in Bootloader mode, it only show IPL and SPL, but not GSM and OS. If I connect it to the USB, in the computer all the time appears and dissapears the connection icon saying that a "error was produced".
What can I do?
Regards and thanks
schumy said:
Hi! Today, a friend has given me that smartphone with a "litlle" problem. When I try to run it, it doesn't pass of the HTC logo. I tried all, softreset, hardware reset, etc... One thing, that I think is "curious" is that when I try to start it in Bootloader mode, it only show IPL and SPL, but not GSM and OS. If I connect it to the USB, in the computer all the time appears and dissapears the connection icon saying that a "error was produced".
What can I do?
Regards and thanks
Click to expand...
Click to collapse
Someone GAVE you that smartphone probably because it is bricked. this means you CANNOT use it, the only chances that you have:
-Unbrick with an original ROM that was installed on that phone*
-Send it to HTC Repair centre
Try these RUU's out:
http://forum.xda-developers.com/showthread.php?t=286873&page=3
If this does not work, well.. you'll have to pay big time
Hi!
If "bricked" means "barried"(sorry I'm not english, I'm from Spain), I can say that is not barried, cause I saw other times that phone in the hands of my friend running perfect and I was present when he bought it, so I know for sure that is not barried.
Where is the original rom? Is a backup?
If I can do it.. I will send it to the repair center.
Regards
schumy said:
Hi!
If "bricked" means "barried"(sorry I'm not english, I'm from Spain), I can say that is not barried, cause I saw other times that phone in the hands of my friend running perfect and I was present when he bought it, so I know for sure that is not barried.
Where is the original rom? Is a backup?
If I can do it.. I will send it to the repair center.
Regards
Click to expand...
Click to collapse
bricked means = a ROM with errors installed. SO you have to install a new rom.
Put the phon ein bootloader mod - connect it and try to install one of the listed ROms from the dutchman.
Su herald is muerto hast tu probares de poner und rom official. Eso es "bricked" - y si no functiona con una rom official - porque no conectionar con tu PC -- tu tienes que poner a service.
Perdona.
Oh, thanks! Thanks for the translation. I've tried to put it in bootloader mode but all the time the computer is advertising of connection and disconnection, and that, all the time.
I'm trying more options
Thanks
In bootloader:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If I don't put the SD card, windows doesn't detect the PDA, but If I put it, Windows "detect" something, and at the same time disappear.
schumy said:
Oh, thanks! Thanks for the translation. I've tried to put it in bootloader mode but all the time the computer is advertising of connection and disconnection, and that, all the time.
I'm trying more options
Thanks
Click to expand...
Click to collapse
1. bootloader
2. connect
Then in the left down corner should appear "USB" on the green - red - blue screen on herald.
Yes, it appears like my photo, but.. nothing more hapens
I can't do nothing yet.. I'm trying all what I see on the forum.. but nothing is runs in my PDA. Someone has an idea?
I get the same as the photo, nothing appears to work. Does anyone have any ideas
Run an RUU for the Herald!
That is not possible. The PC can't detect the PDA correctly.
Have you tried??
Yes, I tried it so many times, and all the time the PC is showing that "something" has been connected, and 1s after, something has been disconnected, and the software of update shows that nothing was detected.
papamopps said:
bricked means = a ROM with errors installed. SO you have to install a new rom.
Put the phon ein bootloader mod - connect it and try to install one of the listed ROms from the dutchman.
Su herald is muerto hast tu probares de poner und rom official. Eso es "bricked" - y si no functiona con una rom official - porque no conectionar con tu PC -- tu tienes que poner a service.
Perdona.
Click to expand...
Click to collapse
how do you enter bootloader mode please explain with details thnxx...
Just enter the bootloader and restart PC until it detect your PPC by ActiveSync. It is PC's, not PPC's issue.
I have the same problem.
It started with the device being slow doing things. I thought some application behaved badly. I soft-reset the phone once and everything was ok until a few hours later, when it started doing the same, a while after that, I find it being reset and stack in the HTC startup screen.
I go into bootloader mode where I see the same screen posted above. Connecting the usb cable, it shows "USB" at the bottom, but then the device is not recognized by the -official- update utility.
My phone is only two weeks old! I have to wait a week before I take it to HTC service, since I'm on vacation.
It seems like a hardware problem.
I think you should run an official RUU and that should clear things up. Your pc may or may not recognize the herald but run the RUU anyways. Keep running through the steps for the RUU as if you knew that windows recognized the phone. It should work.
I already said: "but then the device is not recognized by the -official- update utility". The RUU does not find the device.
I have done some more reading... maybe I should put the .nbh files on the SD, it's trying to read from there when entering the bootloader.
What I would like to know, if other people had experience with this: Is it a hardware problem, so sent it back to service and not waste any more time, or try to fix it by flashing it? How was this problem caused in the first place? Am I going to run into this problem again in the future?
hi i think i got an solution to your problem pres connection manager buton and camera in the same time and the soft reste butn whit the still , that will send you to bootloader menu so you can put and good rom hop it helps
hello
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Related
Hi mates,
I found a WM6 on this website and runed it...everything went okay, after hard reset, it got stuck on the welcome screen:
I can see teh welcome logo and the followings:
IPL 1.25.0001
SPL 1.11.0000
GSM 02.67.90
OS 3.4.0.0
I tried to put it in bootloader mode but can not do it. Record button + reset
any help would be appreciated
thanks
Not you one have same problem(me, and many peoples to) - read forum.
Will wait for official WWE WM6 for UK Orbit.
Bootloader: Record+On/Off button and then Reset.
rom
I also there is the same a problem
Hi I succeeded to obtain rom Italian 1.14.408.1 but this is not helpful me I need rom the original 1.12.408.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Appears a logo HTC and the screen is stuck
laurentius:
if you have uspl installed before you ran upgrade, than you should be able to recover. according to your spl version, you did.
to get to bootloader:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
you get rgb screen in bootloader.
-obtain original rom for your device;
-connect device with usb to pc;
-make sure the battery is charged enough to perform upgrade;
-run standard upgrade utility;
this will return your device to original rom. to do further upgrades, you will need to install uspl again, because it will be overwritten during original rom installation.
regards,
thanks fdp24!
hi! i too, managed to brick my device trying to flash it with an unofficial wm6 version. thankfully, i found this thread and read your reply to another problematic user like me.
i can't thank you enough for instructing me what to do!
god bless!
cheers,
red
thanks a lot people.. i was almost dead.. tried to install a fake WM6 for Tmobile MDA III .. came back here n had to re do the whole stuff again.. thanks a lot..
http://forum.xda-developers.com/showthread.php?t=315526
fdp24 said:
laurentius:
if you have uspl installed before you ran upgrade, than you should be able to recover. according to your spl version, you did.
to get to bootloader:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
you get rgb screen in bootloader.
-obtain original rom for your device;
-connect device with usb to pc;
-make sure the battery is charged enough to perform upgrade;
-run standard upgrade utility;
this will return your device to original rom. to do further upgrades, you will need to install uspl again, because it will be overwritten during original rom installation.
regards,
Click to expand...
Click to collapse
Right im in bootloadeer bit with the IPL/SPL red green blue screen and am pressing the green phone, but nothing is happening please help
JeL:
i think you are trying to hard reset device. don't know why.
then process is different for this
http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
i was describing what to do to resolve problem "stuck at boot screen".
if it is your case, you need factory ROM for your device and flash it from bootloader.
regards,
I try to upgrade my p3300 and now it stack in welcome screen. I Try hard reset but the same. Any Solution ?
got the same problem please heeeeeeeeeeeeelp ! ='(
any one have idea ?
ii_ said:
any one have idea ?
Click to expand...
Click to collapse
Be a bit more specific and I'll see what I can do.
JeL said:
Right im in bootloadeer bit with the IPL/SPL red green blue screen and am pressing the green phone, but nothing is happening please help
Click to expand...
Click to collapse
why do you need to press the green button? you're already in bootloader mode.
the thing to do is, you must have the original rom of your device. if you do, then you can flash it to your phone through the bootloader mode.
try to get your phone again in the bootloader mode (the red/green/blue screen). once you're there, connect your phone to your pc via cable. you'll see in the lower-left corner of your screen "USB". then you may flash your rom from there.
ii_ said:
any one have idea ?
Click to expand...
Click to collapse
are you stuck in the welcome screen? then you should get your device into the bootloader mode. do you have the original rom of your device? it's important that you have it if you want to fix it.
read fdp24's post. it helped me a lot.
hey
yes i'm stuck in welcome screen and i cant switch to bootloader mode. Tried Record+On/Off button reset didnt work and tried volume+On/Off + reset still nothing happend also tried to remove the battery and still the same >_<. cant get out from welcome screen.
The rom is not problem for me but i want to know how to switch to bootloader.
btw thanks for ur reply and i hope will find the solution from you. =)
Bootloader mode is press and hold TOP LEFT button while pressing reset.
Shand359 said:
Bootloader mode is press and hold TOP LEFT button while pressing reset.
Click to expand...
Click to collapse
Tried this and didnt work
I give up
But thanks anyway took my phone to the guarantor.
ii_ said:
Tried this and didnt work
I give up
But thanks anyway took my phone to the guarantor.
Click to expand...
Click to collapse
Don't give up so soon.
I had the same problem as you describe and it was working fine now.
Hold the left button above the volume control on the left side of your phone.
Now press reset button with stylus and release.
Don't release the left button yet until u see the bootloader screen.
Once u are in the bootloader u need to plug the USB connection to PC for ROM upgrade.
U need original ROM. If bought from UK -UK ROM, if bought from German - Gernam ROM, etc...
Please let me know if you have any difficulty to obtain the Original ROM.
Once you updated original ROM u can run active syn and run USPL utility to unlock and upgrade to any ROM you prefer.
Woot thax alot m8 I really should get my phone back and give it a try .
Help , 02mini after time upgrade Rom Magician_WWE_2.03.TX.rar ,its tense is falsely hung up In startup faceplate .
i'm open Bootloader Mod and upgrade Rom MA_1.13.550_Radio_1.12.00_WWE.rar,midway be to warn .
I'm continues open Bootloader set upgrade again ,this its tense at present reported very long time :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Later manifest table :
I'm press Upgrade ,This its tense again at present such:
And Continue so unceasingly do not have another what (on 2h), and mu PPC hung up in Bootloader mode (always USB mode with plugin or plugout cable)
I'm try upgrade rom :
01.ma_o2asiawwe_10300_166_10100_ship.rar
02.MA_Qtek_WWE_v1.13.00.rar
03.MA_TMNL_11300_132_11200_Ship.rar
04.Magician_WWE_2.03.TX.rar
05.UK_11200_131_11210_ship.rar
but still such identical phenomena .
Pros help me , hjx hjx !!! (
Sorry , my English is bad !!!
i have that problem to... exactly same problem... i think there is only one solution ---> flashing ROM by using SD card... but rightnow i don't have any idea how to convert nk.nbf to nk.nb1???
Help me !!! ;((
Hello from Poland.
I have got the same problem. I bought HTC Magician (as MDA Compact by ERA).
It had T-mobile rom installed by previous owner. It was 1.13 with 1.13 Radio and branded ExtRom. I didn't like the branding so I decided to flash it. I decided to give "Magician_WWE_2.03.TX" a try. However it wasn't what I expected it to be. That made me download "MA_TMUK_11300_128_11200_Ship.exe" and use it until I find something else worth of interest. And then my problems started. Flashing hang at first step (Radio downgrading to 1.12), it hadn't even started, I suppose. After that I can't flash any other rom, even WWE_2.03.TX once more, which did not cause any problems at the first time. My magician don't act strange despite that. I don't know what to do. I just want to be able to flash it to qtek s100 1.13 rom or even back to t-mobile.
Any suggestions?
edit: I've tried flashing from SD (even flashing the bootloader) advised in this topic http://forum.xda-developers.com/showthread.php?t=319354 but it did not help
edit2: I've tried that solution as well http://forum.xda-developers.com/showthread.php?t=304408 - didn't help
edit3:
I've got same symptomps as in the screens posted by o0oCr4zyxo0o when I start flash program while phone is in bootloader mode.
When I start it when phone is normally turned on the upgrade program gets info in a proper way but when I click "upgrade" phone is restarted back to normal mode and nothing happens - it's like it can't be switched to bootloader mode by the script. Switching phone to BL mode manually after getting the info causes communication problems and upgrading doesn't start....
I have the same problem, need help.
o0oCr4zyxo0o said:
Help , 02mini after time upgrade Rom Magician_WWE_2.03.TX.rar ,its tense is falsely hung up In startup faceplate .
i'm open Bootloader Mod and upgrade Rom MA_1.13.550_Radio_1.12.00_WWE.rar,midway be to warn .
I'm continues open Bootloader set upgrade again ,this its tense at present reported very long time :
Later manifest table :
I'm press Upgrade ,This its tense again at present such:
And Continue so unceasingly do not have another what (on 2h), and mu PPC hung up in Bootloader mode (always USB mode with plugin or plugout cable)
I'm try upgrade rom :
01.ma_o2asiawwe_10300_166_10100_ship.rar
02.MA_Qtek_WWE_v1.13.00.rar
03.MA_TMNL_11300_132_11200_Ship.rar
04.Magician_WWE_2.03.TX.rar
05.UK_11200_131_11210_ship.rar
but still such identical phenomena .
Pros help me , hjx hjx !!! (
Sorry , my English is bad !!!
Click to expand...
Click to collapse
coly said:
I have the same problem, need help.
Click to expand...
Click to collapse
HELP HELP HELP HELP HELP HELP HELP HELP
I am wondering if anything new was found in this field? My Magician has been lying in a cupboard for about two years (sic!) and today I thought that maybe I can do something with it.
Has anybody coped with flashing problem?
BR
Igor
Mod. edit: not dev related, moved to general
gl though
Hello i'm too from Poland and have this same problem Hmm also tryed many roms. I think the last chance for us is flashing from sd card. But we must have backup rom, i tryed without this but pda not start flashing. Program nfbdec.exe convert form nk1 to nkf.
Go on, keep working, don't givap Any new ideas??? I tryed to change first 416 bytes with BS113 rom with my information from mda getdavicedata.exe, not use.
Hello to all.
Today, after I installed the Hard Spl (I have a Dream Italian Tim running unlocked with this guide:http://www.androidiani.com/news/finisce-il-dream-di-tim-guida-allhacking-dellhtc-g1-tim-1677), I have mistakenly pressed a button trying to put fastboot mode and now the device is fixed on the screen with different colored horizontal bands: red under the green, then blue and finally white. I can't move from there. What do I do? Help me please!!!
Thanks in advance!
Here is the screen that appears (in the photo isn't my dream)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
iDelly said:
Hello to all.
Today, after I installed the Hard Spl (I have a Dream Italian Tim running unlocked with this guide:http://www.androidiani.com/news/finisce-il-dream-di-tim-guida-allhacking-dellhtc-g1-tim-1677), I have mistakenly pressed a button trying to put fastboot mode and now the device is fixed on the screen with different colored horizontal bands: red under the green, then blue and finally white. I can't move from there. What do I do? Help me please!!!
Thanks in advance!
Here is the screen that appears (in the photo isn't my dream)
Click to expand...
Click to collapse
Press Call+Menu+End to exit SPL. However, that is not what HardSPL looks like.
I know that what is not the Hard Spl like.I think he had accidentally flash a firware that was in sd. However, how do I put it back affixed? With the buttons that you suggested I press nothing happens.
jashsu said:
However, that is not what HardSPL looks like.
Click to expand...
Click to collapse
using my bionic eye, it looks like it is the boot loader from a Raphael....but the OP does say it isn't a photo of his dream.
This is the best photo of my Dream I could take:
Sorry for the size of the photo but nuw you can see it well
If I Press power + camera the device write "loading......no image file" and after retourn the coloured screen. Please help me, I' don't know how do can I do!
Then I have to send it in care?
Pull out battery
If you anna exit pull out the battery. The best way.
Calm down!
iDelly said:
Hello to all.
Today, after I installed the Hard Spl (I have a Dream Italian Tim running unlocked with this guide:http://www.androidiani.com/news/finisce-il-dream-di-tim-guida-allhacking-dellhtc-g1-tim-1677), I have mistakenly pressed a button trying to put fastboot mode and now the device is fixed on the screen with different colored horizontal bands: red under the green, then blue and finally white. I can't move from there. What do I do? Help me please!!!
Thanks in advance!
Here is the screen that appears (in the photo isn't my dream)
Click to expand...
Click to collapse
Don't alarm yourself! The rainbow screen is normal and revertable.
Taking out the battery and putting it back in should do the trick.
Regarding fastboot. Explain to us the steps you used (especially specificate the mistake) so that someone can tell you were you did wrong. Personally i dont know much about the matter and i will restrain from giving you undeatailed info. Sorry, i cant help that much. But if you would need, i know italian, so i can translate.
OK, grate thanks a lot! But i don't know how i get the Htc on th rainbow screen. I belive that I have accidentally installed, after the installation of Spl, a mistaken firmware in the SD. How con I fix it?
P.s.
D'oh!!
The rainbow screen is the G1 bootloader that shows up when powering up by pressing camera+power buttons simultaniousley,
i belive thats what you did to install the HardSpl, no?
Make reference to this thread for more info on SPL's
http://forum.xda-developers.com/showthread.php?t=455860
Yes, I used that topic for install the SPL. Here http://forum.xda-developers.com/showthread.php?t=455860 in the third photo there is the rainbow screen.
As the carry-over to the state functioning?
iDelly said:
Yes, I used that topic for install the SPL. Here http://forum.xda-developers.com/showthread.php?t=455860 in the third photo there is the rainbow screen.
As the carry-over to the state functioning?
Click to expand...
Click to collapse
Oh, i understand.
You still get your rainbow bootloader (aka. G1's original bootloader) lol. Sorry that took me so long to understand xD.
That means you did something wrong in the process of updating you SPL. Because Hard SPL would look like the 1st picture(gray, with androids on skateboards ) not the other one.
Here's what you had to do to get Hard SPL, make sure you did everything right:
Installation
The SPLs are packaged in the familiar update.zip format and install from the recovery console in the same fashion as other update files.
1. If you are installing onto a G1, your G1 must have a modified recovery partition(or root). If you have one of JesusFreke's Android builds installed, then you have a modified recovery partition.
2. Download the desired SPL zip file (attached below), rename it to update.zip and copy it to the root of your sdcard. As usual, remember to use a USB cable with a ferrite core and dismount your USB drive before disconnecting.
3. Reboot the phone into recovery console(pressing home+power) and flash the update with Alt+S.
4. To confirm it has installed properly, power on the G1 with Power+Camera to enter the bootloader. When you are done, press CALL + MENU + END to leave the bootloader.
5. To revert a G1 to its factory original SPL, simply use the G1 Original SPL.
Click to expand...
Click to collapse
P.S: Quotes are taken from http://forum.xda-developers.com/showthread.php?t=455860
Ok, but now.........what should I do? The computer don't see the HTC if I connect it.
Ok, well its not supposed to do that. Doesn't it bring up a notification to "mount" in the notification bar?
You have a new PM
bluedrag0on said:
Ok, well its not supposed to do that. Doesn't it bring up a notification to "mount" in the notification bar?
Click to expand...
Click to collapse
Sorry, can you translate?
Check your messages next time! I sent you 2 private messages telling you the same thing! lol
Ok, well its not supposed to do that. Doesn't it bring up a notification to "mount" in the notification bar?
Click to expand...
Click to collapse
Personally i already flashed the HardSPL bootloader on my G1 without any problems. I cant understand what you did wrong, can you explain??
Translation in Italian:
Non c'e problema. Tu hai detto che non sei riuscito a connetere il tuo G1 al computer giusto? Dicevo, ma e possible che non ha mostrato nessuna notificazione sullo scermo come al solito?
Personalmente io ho appena scaricato l' HardSPL bootloader sul mio telefonino senza problemi. Non capisco. Mi puoi dire esattamente cosa e che hai fatto d'errato? lol
I think I accidentally left a firmware on the SD and that is loaded by itself after installing the SPL. Now the computer no longer recognizes it and I do not know what to do ........
Easy way would be to wipe your phone.
Other than that you can download an update of the firmware using directly your phone since you cant connect to your computer.
Show me pictures of your firmware's settings, im curious.
Enter Settings>>About phone and take a photo if possible.
So guys i find out that the intern recovery os not working correct.
Thats what i did:
Time ago i installed some Open touch rom, but after that my Herald stuck in Open Touch screen, than i flashed orig. HTC German Rom, an it stucks in HTC screen, now i flashed orig. VODAFONE WIN6.0 GER Rom and it stuck by the Vodafone logo.
Doing Hardreset, it asks in english, but the rom is german.
Can someone help me???
Specifications:
HERA10000
IPL: 4.14.0001
SPL: 4.14.0000
CID locked (VODAP102)
USB Connection to PC (XP) works, but no Activ Sync Connection, I tried several things (goldcard, orig. Rom), but nothing will change the probs.
Can I change the intern recovery OS??? Well i think this is corrupted.
Thanks for Helping answers, I will donate to the guy who can help me....
no one can help me???
there is no such thing as a recovery os on htc devices there is only the rom
read here how you flash the rom
http://wiki.xda-developers.com/index.php?pagename=HTC_Herald
i´ve read since the last 5 days every post and thread of this forum about how to flash HTC Herald and so on, but didn´t found anything.
It is CID locked, couldn´t flash anymore. with goldcard methode it works but then it stocks in the splash screen.
thanks for your answer
knopfe said:
i´ve read since the last 5 days every post and thread of this forum about how to flash HTC Herald and so on, but didn´t found anything.
It is CID locked, couldn´t flash anymore. with goldcard methode it works but then it stocks in the splash screen.
thanks for your answer
Click to expand...
Click to collapse
You dont need Goldcard. Your SPL and IPL are 4.xx. You can HardSpl and flash any rom
About Recovery
puch camera and buton sound and power on after power release camera botun and i think it's well work
kristopherson said:
You dont need Goldcard. Your SPL and IPL are 4.xx. You can HardSpl and flash any rom
Click to expand...
Click to collapse
HardSpl didn´t work, it comes to 100% and than says "update error"...
Bad flash? probably
i think so...what can i do to make this going well???
knopfe said:
HardSpl didn´t work, it comes to 100% and than says "update error"...
Click to expand...
Click to collapse
Then throw it away and get an iphone. LOL
Make sure you read the directions and follow every step. If you skip anything it will not work
ive read them very carefully...but it doesn´t work furthermore...the only thing will be, that i throw it away and buy another newer one.....or have anybody an solution????
i have read about a DoC? What is this???
tks
edit: its going forward, i think. in vodafone screen it has usb connection, if i try to flash another screen appears (shown in attachement) and than a white screen comes, but nothing happend.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Put the phone into bootloader mode again and try to flash again. If it fails, create a gold card. You can't hardSPL unless windows mobile boots.
What were you flashing that you got a white screen? The HardSPL?
DoC is the hardware level Flash Memory. Don't mess with it.
to get the white screen i try to flash the stock rom, if vodafone screen was shown.
in bootloader mode i can flash only one rom, the stock rom...if this done...it stuck again in the vodafone screen...couldn´t create goldcard,because i have no second win mobile device, any other way to create a goldcard??
thx
knopfe said:
to get the white screen i try to flash the stock rom, if vodafone screen was shown.
in bootloader mode i can flash only one rom, the stock rom...if this done...it stuck again in the vodafone screen...couldn´t create goldcard,because i have no second win mobile device, any other way to create a goldcard??
thx
Click to expand...
Click to collapse
Yes, try this: http://forum.xda-developers.com/showthread.php?t=485364 but with the Herald instead of Dream.
Is the stock ROM a vodafone ROM?
If the stock ROM is flashing properly but not booting properly, it might be a hardware issue.
yes the stock rom is a vodafone rom...
you mean that it is dead...:-(
i got some win mobile device tomorrow, than i try the goldcard method...if this is not working i give it up and throw it away....
thanks
so i tried it several times with a goldcard, but it goes everytime in bootloader...what should i do now???
I have read through a lot of threads to try and fix this but I do not think I have found someone with the same problem.
First off:
I am running Windows ultimate x64
And my phone is running;
PB8110 HX-BC
SPL-1.42.0000
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
It is of South east Asian origin.
When ever I try to install HSPL3 or 4 I get stuck at this point and it will sit there forever, The phone stays in TRI Colour mode and does display USB.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have tried uninstalling the Windows drivers and reinstalling them but this was no avail.
I am really sorry if this has been answered, I was looking all yesterday from about 1pm onwards for the answer.
Do this the next time you run HSPL right click it and select run as administrator. I think this is your problem as you are not running it as administrator.
I have UAC turned off and I have tried that.
Still just sits there.
Have you temperarily disabled you firewall and AntiVirus?
Yep, gone through all of that.
And firewall would do nothing as the installer does not connect into the network.
Chevron-BH said:
Yep, gone through all of that.
And firewall would do nothing as the installer does not connect into the network.
Click to expand...
Click to collapse
This is trueit does not connect to the internet or a network but you might just be suprised as to the problems a firewall can cause. Personaly sugest you turn it off just to be sure. Also do you have anything else open and running while you are trying to flash HSPL, it is recomenxed not to have anything else open and running. Also have you tried redownloading HSPL and trying again just incase you got a bad dowload?
I will try turning off the firewall and everything else.
I do run teamspeak as I had someone helping me with the process.
Ok this time I got an error.
And it happened only after a few minutes, so i guess that is better then nothing.
I was using HSPL4 and installing 2.08HSPL
Have you by chance tried changing USB ports I know you said you have tried reinstalling the drivers. If by chance you have another USB cable that you can use try this also. Just for you knowledge when connected via USB while in bootloader your HD2 should be listed as HTC USB Sync in the safe to remoce device thing and I think it is the same in device manager.
I have tried all of my free ports.
It shows up as Qualcomm CDMA Technologies MSM, when plugged in but HTC USB Sync in device manager.
Click on the safe to remove device thing and and break the connection detween your coputer and HD2 ghen unplug the USB cable. Next restart your computer, once it is completely up and going and ready for use press the reset button on your HD2 but hold down the volume down button to go into bootloader. Reconnect the USB cable and what for USB then flash HSPL. If this does not work I am sorry to say but i am out of ideas.
Is it meant to install as QualComm?
I am on my way home right now, give me about 20 minutes and I will be home and I will double cbeck with my HD2 on my computer as I am not 100% sure. I will post back here when I have checked.
OK, well I started HSPL4 at 12:00pm my time, 21 minutes later, nothing.
It just sits at that screen.
So after 33 minutes of nothing I get this error.
Ok I am home now and this is kinda wierd. I just got a new computer two days ago and being as I had to go out oc town for work and just got back home this was tbe firsg time I have connected my HD2 to it. If I put it in bootloader it stsrts to install the drivers but then says drives for device was not sucessfully installed but when it is trying to install the drivers it comes up as Qualcomm CDMA Technologies MSM. But if I let my HD2 boot up it will install the drivers for me to use it as a mass storage device. Seeing as I have not installed Windows Mobile Devive Center yet I am wondering if this has anything to do with it. Cause it only list two drivers as being installed now but on any other comouter that I have installed WMDC onto it list four drivers being installed. So my question to you is have you installed WMDC? I have to download it and installl it but I will let you know if if makes a difference for me. Oh and vy the way I have not gottin USB in bootloader yet.
I do have WMDC installed, I can also get into my bootloader manually.
My SIM and SD card is plug in, I have tried without them as well.
Chevron-BH said:
I do have WMDC installed, I can also get into my bootloader manually.
Click to expand...
Click to collapse
Ok this is kinda important, always manually put your HD2 into bootloader when flashing. I know the official ROMs say use ActiveSync, but it will still juzt put your HD2 into bootloader when you flash but bootloader will time out for multipule reasons when flashing through ActivSync. If you put your HD2 into bootloader first then flash you save a small amount of time and you usually don't have the problem with bootloader timing out. Bootloader timing out can cause flashes to fail.
No I have been doing in manually.
I want too know what that new error is though.
Ok I got WMDC installed and yes now it did install the drivers and it was showing up as Qualcomm CDMA Technologies MSM but changed to HTC USB Sync when it the driver was sucessfully installed. Now as for what the error message means I will not lie I do not know. Sorry it took awhile to respond back but I have only Edge for data signal at home and I use my HD2 to get my coputer online, plus my ole lady had to use the comp for a minute.