Database Users

Question for the experts (Screen issue)

Hi
I installed the phone skin called: Tachi PhoneCanvas
You can find it here: http://forum.xda-developers.com/showthread.php?t=499076
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice skin I tought, but after installing I performed a softreset and then
My screen went mad showing the attached picture (Sorry for the quality), Uni was stucked at that screen not working soft or even hard reset.
After taking out battery and place it again I tried a hard reset and this time worked, all is working normal now but every soft reset I made since that event it appears the same freaky screen...
Any ideas of what is going on with my Uni is more than apreciated
Thanks in advance

Does it continue to boot now after the freak screen? Or do you have to do battery & hard reset each time after soft reset?

JonMorgan said:
Does it continue to boot now after the freak screen? Or do you have to do battery & hard reset each time after soft reset?
Click to expand...
Click to collapse
It continues to boot normal
But also some unexpected freezes
Any clue?
Today I´ll try to reflas the ROM and see if this helps, also think on reinstall the O2 boot screen

orb3000 said:
It continues to boot normal
But also some unexpected freezes
Any clue?
Today I´ll try to reflas the ROM and see if this helps, also think on reinstall the O2 boot screen
Click to expand...
Click to collapse
Yes I was just going to say install a new boot screen. Mine went feaky for the first time just 2 weeks ago. However it didn't affect the boot-up, just looked funny. However, I expect that if the picture was affected, it could also quite have easily been the boot up too.
I have a very nice boot screen which I copied from someone else* and added my own bits...
(*someone else, sorry I forgot who, but you're quite welcome to step forward)

JonMorgan said:
Yes I was just going to say install a new boot screen. Mine went feaky for the first time just 2 weeks ago. However it didn't affect the boot-up, just looked funny. However, I expect that if the picture was affected, it could also quite have easily been the boot up too.
I have a very nice boot screen which I copied from someone else* and added my own bits...
(*someone else, sorry I forgot who, but you're quite welcome to step forward)
Click to expand...
Click to collapse
Thanks mate
I´ll report later what happened
Cheers,
EDIT: Reinstalled boot splash screen and screen does not appears, still same freaky screen
Now reflashing, post later

Problem got serious
Well
After doing a reflash, upgrade utility finished 100% ok
but when doing the first hard reset...again!!!!!!!! the freaky screen!!!
And now it not passes from there, so I cant enter to windows
i leaved the battery out so it wont discharge...
Please any help is more than apreciated!!
It´s my main phone and I´m really worried
I will post a little video later of it´s behaivour
EDIT: I solve it using mtty from this post!!
http://forum.xda-developers.com/showpost.php?p=1097645&postcount=4
I´m happy!!! my wife gave me moral support durning all the process

Splash screen how to
After all my problem now solved
The only thing I couldn´t solve is to put any splash screen again to my Uni
So every time I reboot I see only a black screen with the ROM info
I tried the different methods posted and non result positiv to put any splash again (tested several)
Any advice?
Thanks,

Felicidades
It is good to know that your uni is back.
I hope I see you soon in Coatepec
Saludos

mochoab said:
It is good to know that your uni is back.
I hope I see you soon in Coatepec
Saludos
Click to expand...
Click to collapse
Thanks mate!
I´m back again!
Hope to see you soon
Saludos,

Orb, this one worked for me on Tomal 6.1 build 21048.1.6.3
(now how come that uploaded ok!?)

JonMorgan said:
Orb, this one worked for me on Tomal 6.1 build 21048.1.6.3
(now how come that uploaded ok!?)
Click to expand...
Click to collapse
I´ll test in on 8.9 regular I´l post later
Thanks a lot!

orb3000 said:
I´ll test in on 8.9 regular I´l post later
Thanks a lot!
Click to expand...
Click to collapse
Let me a PM if it fails and I'll provide a step by step...
regards

tomal said:
Let me a PM if it fails and I'll provide a step by step...
regards
Click to expand...
Click to collapse
Hi Tomal
Attached the image I was using before my screen problem
It´s the original one from O2
Thanks a lot for your help!
Oops! something hapenned cant upload the splash
Invalid file

orb3000 said:
Hi Tomal
Attached the image I was using before my screen problem
It´s the original one from O2
Thanks a lot for your help!
Oops! something hapenned cant upload the splash
Invalid file
Click to expand...
Click to collapse
rename the file to abcd.zip ...

tomal said:
rename the file to abcd.zip ...
Click to expand...
Click to collapse
Finally here it is!
As I use winrar had to change to winzip to do this
Thanks

Hi Orb,
Find the splash image attached.
It will be flashed as a rom image so please do necessary backup of your data and then start flashing. Please note that you need to re-flash the OS image (i.e. my v8.5 or v8.9 etc.) once again after the splash flash is complete.
Step by step:
1. Backup the data from your device
2. Connect the USB cable
3. Flash Splash (rom) image (do not reset the device at this stage)
4. Flash OS (rom) image
5. Hard-reset your device
...
Cheers

tomal said:
Hi Orb,
Find the splash image attached.
It will be flashed as a rom image so please do necessary backup of your data and then start flashing. Please note that you need to re-flash the OS image (i.e. my v8.5 or v8.9 etc.) once again after the splash flash is complete.
Step by step:
1. Backup the data from your device
2. Connect the USB cable
3. Flash Splash (rom) image (do not reset the device at this stage)
4. Flash OS (rom) image
5. Hard-reset your device
...
Cheers
Click to expand...
Click to collapse
Hi Tomal
Thanks you very much!
I´ll do it over the weekend
Cheers,

Recovery os not working

So guys i find out that the intern recovery os not working correct.
Thats what i did:
Time ago i installed some Open touch rom, but after that my Herald stuck in Open Touch screen, than i flashed orig. HTC German Rom, an it stucks in HTC screen, now i flashed orig. VODAFONE WIN6.0 GER Rom and it stuck by the Vodafone logo.
Doing Hardreset, it asks in english, but the rom is german.
Can someone help me???
Specifications:
HERA10000
IPL: 4.14.0001
SPL: 4.14.0000
CID locked (VODAP102)
USB Connection to PC (XP) works, but no Activ Sync Connection, I tried several things (goldcard, orig. Rom), but nothing will change the probs.
Can I change the intern recovery OS??? Well i think this is corrupted.
Thanks for Helping answers, I will donate to the guy who can help me....

no one can help me???

there is no such thing as a recovery os on htc devices there is only the rom
read here how you flash the rom
http://wiki.xda-developers.com/index.php?pagename=HTC_Herald

i´ve read since the last 5 days every post and thread of this forum about how to flash HTC Herald and so on, but didn´t found anything.
It is CID locked, couldn´t flash anymore. with goldcard methode it works but then it stocks in the splash screen.
thanks for your answer

knopfe said:
i´ve read since the last 5 days every post and thread of this forum about how to flash HTC Herald and so on, but didn´t found anything.
It is CID locked, couldn´t flash anymore. with goldcard methode it works but then it stocks in the splash screen.
thanks for your answer
Click to expand...
Click to collapse
You dont need Goldcard. Your SPL and IPL are 4.xx. You can HardSpl and flash any rom

About Recovery
puch camera and buton sound and power on after power release camera botun and i think it's well work

kristopherson said:
You dont need Goldcard. Your SPL and IPL are 4.xx. You can HardSpl and flash any rom
Click to expand...
Click to collapse
HardSpl didn´t work, it comes to 100% and than says "update error"...

Bad flash? probably

i think so...what can i do to make this going well???

knopfe said:
HardSpl didn´t work, it comes to 100% and than says "update error"...
Click to expand...
Click to collapse
Then throw it away and get an iphone. LOL
Make sure you read the directions and follow every step. If you skip anything it will not work

ive read them very carefully...but it doesn´t work furthermore...the only thing will be, that i throw it away and buy another newer one.....or have anybody an solution????
i have read about a DoC? What is this???
tks
edit: its going forward, i think. in vodafone screen it has usb connection, if i try to flash another screen appears (shown in attachement) and than a white screen comes, but nothing happend.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Put the phone into bootloader mode again and try to flash again. If it fails, create a gold card. You can't hardSPL unless windows mobile boots.
What were you flashing that you got a white screen? The HardSPL?
DoC is the hardware level Flash Memory. Don't mess with it.

to get the white screen i try to flash the stock rom, if vodafone screen was shown.
in bootloader mode i can flash only one rom, the stock rom...if this done...it stuck again in the vodafone screen...couldn´t create goldcard,because i have no second win mobile device, any other way to create a goldcard??
thx

knopfe said:
to get the white screen i try to flash the stock rom, if vodafone screen was shown.
in bootloader mode i can flash only one rom, the stock rom...if this done...it stuck again in the vodafone screen...couldn´t create goldcard,because i have no second win mobile device, any other way to create a goldcard??
thx
Click to expand...
Click to collapse
Yes, try this: http://forum.xda-developers.com/showthread.php?t=485364 but with the Herald instead of Dream.
Is the stock ROM a vodafone ROM?
If the stock ROM is flashing properly but not booting properly, it might be a hardware issue.

yes the stock rom is a vodafone rom...
you mean that it is dead...:-(
i got some win mobile device tomorrow, than i try the goldcard method...if this is not working i give it up and throw it away....
thanks

so i tried it several times with a goldcard, but it goes everytime in bootloader...what should i do now???

O2 herald problem 3 color screen

Hello
ROM device to install 3 color keranda left. Now I want to install 2% remain open and 3 are colored. Can not HARDSPL.
How can I solve?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ibobaba said:
Hello
ROM device to install 3 color keranda left. Now I want to install 2% remain open and 3 are colored. Can not HARDSPL.
How can I solve?
Click to expand...
Click to collapse
This is the wrong thread to post in if you have problems as this is the ROM Development thread, and it'll probably be moved and/or locked once Ivan sees it. But I'll go ahead and answer your question.
The three colored screen is the bootloader. If you press the reset button, you should be able to boot your copy of Windows Mobile. If you are trying to HardSPL you'll need to first be in Windows mobile, and next follow one of the many HardSPL guides on this thread. If you have trouble finding it, a quick forum search will bring it up. I hope this answers your question, good luck.

I've searched the forum. But the device was not able to HARDSPL in any way. Not install the ROM. RESET solution did not.

At first you have to install an original htc rom, after this you have to install hard spl, and then you can flash a rom. If the device stops flashing at 2%, it is a rom with less than 52 MB, this must be flashed by storage card (Read the description). It happens to me also before a time.
If the rom has more than 52 MB, it will work in the normal process after installing hard spl.

I could not find the original O2 ROM. Can not SPL. 100% gives an error. The storage card when I want to look at "certifica invalid" error.

Restart your pc and your smartphone. Press and hold camera button and the upper button on the right side of the terra, press short in the soft-reset hole with your stylus, but hold the buttons until the three coloured screen appears (the bootloader). Now connect your phone with the pc.
At first flash this ROM. I used it yesterday with an o2 XDA-Terra, and it runs. If your storage card makes problems like before, formate it in the pc in FAT.
After this step you can follow the description here. Don´t forget to soft reset your device after installing the three cabs. Flash the Hard SPL rom also using the bootloader mode. There will be less errors in this mode. Don´t worry, that you don´t see the progressbar. When you flash Hard SPL, the screen is blank (white). After a while it´s finished, your device will reboot and shows on the 1st screen: Now your Hard SPL. Until this time you can flash every herald rom bigger than 52 MB by bootloader mode or in the normal way.

same problem
my phone is hard spled. thing went fine after hard spl, i was able to flash 2 roms, the last one was juststablev2. after one day my phone started to freeze, random crashes, finishing with a "white screen" and then resets. and after a couple of crashes the phone coulnt even load windows anymore, after the splash screen it continiued to reset. and now, the phone dosnt gets on anymore, it only goes to bootloader (not when you turn on the phone, the cant be turned on, only pressing cam button and resetting turns the phone on and you can only be in bootlader. ) i tried everything, readed almost everything in xdadevelopers, tried to flash with shipped roms, tried to flash with custom roms, tried to flash from pc, to flash from sd card (and yes i know everything to do becouse i did my earlier flashed with sd card, all went without any problem). it just looks the phone is dead, but can enter into bootloader. do anyone have any idea ? ill be realy very thankfull if someone can think something about my problem.
ps : my SPL is 4.70.yang

On your pics I can´t see 4.70 yang. When I look there, it seems, as it has lost Hard SPL. Because there is written 4.10.0000. If the 1st screen shows Now Your Hard SPL and the yang-sign, it´s only a boot screen, left by the installation of Hard SPL before. The actual spl you see in the bootloader mode.
If these pics are not actual, I don´t know, what´s to do. But if they are right, you have to flash again an original rom and then Hard SPL again. Put your storage card out of the device or formate it in FAT/ FAT 32, before you begin to flash. Maybe, it´s the reason of your problem.

Neo XL said:
Restart your pc and your smartphone. Press and hold camera button and the upper button on the right side of the terra, press short in the soft-reset hole with your stylus, but hold the buttons until the three coloured screen appears (the bootloader). Now connect your phone with the pc.
At first flash this ROM. I used it yesterday with an o2 XDA-Terra, and it runs. If your storage card makes problems like before, formate it in the pc in FAT.
After this step you can follow the description here. Don´t forget to soft reset your device after installing the three cabs. Flash the Hard SPL rom also using the bootloader mode. There will be less errors in this mode. Don´t worry, that you don´t see the progressbar. When you flash Hard SPL, the screen is blank (white). After a while it´s finished, your device will reboot and shows on the 1st screen: Now your Hard SPL. Until this time you can flash every herald rom bigger than 52 MB by bootloader mode or in the normal way.
Click to expand...
Click to collapse
4:10 SPL as in the picture. Can not HardSpl. 100% gives an error. I'm trying to install gives 1% error HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship. Still could not solve. With the original O2 rom if you can add terra?

Do you have a solution with MTTY?

Please help...my HD2 stuck in " Stick together " screen

please help me...i up a lot of "rom ship" but my HD2 still stuck at " stick together screen" although all process of uploading rom is ok. I've used Task 29 but cant help me...
i dont know why...please help me
thank you all.
here is my bootloader and my sitiuation:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

cant really see what you're boot-loader says picture to small, what have you done to get to this?

Demon_man said:
cant really see what you're boot-loader says picture to small, what have you done to get to this?
Click to expand...
Click to collapse
U can see big picture in here :
Code:
http://lh6.ggpht.com/_nKBDPu7hzaw/TCYtMkhVVEI/AAAAAAAAA_w/UUa7iKqnI-4/s128/IMG_0018.JPG
http://lh3.ggpht.com/_nKBDPu7hzaw/TCYtMwhZ9tI/AAAAAAAAA_0/qOC5MIT3pkw/s128/IMG_0019.JPG
i do nothing...
first my brother have this...and used it nomally....( when i check the recieved call time and outgoing call time about 10 hours....) but after my brother did somthing with my hd2 ( he didnt remember what he did..)
when i recieved hd2...it sometime can boot into OS...but sometime automatic reset and stuck at logo "HTC" screen...after that i up rom ship...but nothing better....now it stuck at "stick together" screen.. ( .

hlpdt10 said:
U can see big picture in here :
after that i up rom ship... .
Click to expand...
Click to collapse
what does that mean?? do you mean you tried to update the shipped ROM?? if so then please write this because it makes more sense for people to understand
and the pictures are still small on them links, just to let you no
have you tried a hard reset ?

Demon_man said:
what does that mean?? do you mean you tried to update the shipped ROM?? if so then please write this because it makes more sense for people to understand
and the pictures are still small on them links, just to let you no
have you tried a hard reset ?
Click to expand...
Click to collapse
Yes...i try update a lot of shipped rom( asia WWE shipped rom, tmous........ and try to hard reset alot of time) but nothing better..
Sorry..i 've updated a big screen about my bootloader

I see you have hspl have you tried to flash a custom ROM

Demon_man said:
I see you have hspl have you tried to flash a custom ROM
Click to expand...
Click to collapse
yes i tryied PQ 's rom....but nothing better...
Now...it can boot into the OS again but i'm afraid that it can happen again( sometime OK sometime NG )
i captured my information for u :

Now it auto restart after some minutes and stuck again...(

this is very strange, ill be honest im not the best person to speak to really, you couple ask in the rom section, or advance edit your first post and ask for it to be moved to the rom section, you might get a little more help mate, sorry i cant help though hope you find a solution

sounds like the wrong hspl was used. go to mskips tutorial on flashing a custom rom for the leo. is yours the 1024 leo hd2 or the 512 leo hd2.

sherlockpwnz said:
sounds like the wrong hspl was used. go to mskips tutorial on flashing a custom rom for the leo. is yours the 1024 leo hd2 or the 512 leo hd2.
Click to expand...
Click to collapse
512 LEO HD2 is mine....

hlpdt10 said:
Now it auto restart after some minutes and stuck again...(
Click to expand...
Click to collapse
run task29 to clear your rom space from all the flashing, reflash your chosen rom using usb, and check your battery connections, some possibility of a bent pin maybe.

samsamuel said:
run task29 to clear your rom space from all the flashing, reflash your chosen rom using usb, and check your battery connections, some possibility of a bent pin maybe.
Click to expand...
Click to collapse
i tried Task 29 before , and i replace my battery with good one from my friend ( he 's using his LEO nomal) but nothing better...

samsamuel said check the pins mate, the battery can be fine if the contacts re at all bent on the phone it wont boot double check ??

here my picture about my pin and battery:

hhmm looks all ok to me, I'm sorry this doesn't help you in anyway at all but there seems to be a few people this is happening to of late.

now my LEO cant turn on..poor me...

hey man,
i just had the same problem and i was freaking out for a bit. i was stuck on the screen forever.... but i knew i was in a okay situation because i was still able to go into bootloader mode. anyways, i tried to format my sd card from my tools>>format sd card>> after that i restarted and my phone would hang on the tmobile splash screen.
i then tried to flash miri rom and it was still hang. i reflashed the last known working rom which was energy rom and it booted up perfectly.
im curious how your phone wont turn on? sorry to hear that man.

same problem with my hd2
i bought this phone on ebay and have the same exact problem it is stuck on "stick together" screen some times its boot and work normaly but after 3-5 minutes it reset again back to "stick together screen" this is frustaiting please help

I find this happening to me afew times a day actually, it gets rather annoying but I find taking the battery out for about a min or two and then trying again helps usually. It's a pain when you have to pull the battery 5+ times just to get your phone to start back up.

GPS problem

Hi guys and gals, i recently purchased a htc magic
i have been having trouble getting gps to work.
i did a bit of reading and found out how to do a
factory test. So once it starts i checked my gps and the message i got was
(gps failed -8) has anyone come across this error ? is it fixable
or does it mean its stuffed ?
any help would be much appreciated thanks

apprentice01 said:
Hi guys and gals, i recently purchased a htc magic
i have been having trouble getting gps to work.
i did a bit of reading and found out how to do a
factory test. So once it starts i checked my gps and the message i got was
(gps failed -8) has anyone come across this error ? is it fixable
or does it mean its stuffed ?
any help would be much appreciated thanks
Click to expand...
Click to collapse
Sounds to me that you either have
Hardware malfunction
Problem with your rom.
Is your phone rooted with a custom rom installed?

the phone is rooted im trying to put custom rom on but
i cant get the flash recovery to load up on startup.
currently i have android 2.1 installed

apprentice01 said:
the phone is rooted im trying to put custom rom on but
i cant get the flash recovery to load up on startup.
currently i have android 2.1 installed
Click to expand...
Click to collapse
Could be the rom, could be the hardware, could be the radio.

thanks for your help guys is there anyway to check which one it might be ??

apprentice01 said:
thanks for your help guys is there anyway to check which one it might be ??
Click to expand...
Click to collapse
Process of elimination.
Flash the stock rom and double check your required spl/radio combination.
If it still doesn't work then it's hardware.
If it does then it's either the rom or the radio.
Good luck.

I have run system info says got no radio
here's a print out
# Build #
ID=ERE27
Product=e1000_klx1
Device=e1000_klx1
Board=unknown
CPU ABI=armeabi
CPU ABI 2=N/A (API Level 8)
Manufacturer=unknown
Brand=yusu
Model=e1000_klx1
Type=user
Tags=test-keys
Finger Print=yusu/e1000_klx1/e1000_klx1/unknown:2.1/ERE27/eng.root.20101014.171514:user/test-keys
Time=1287048036000
User=root
Host=talcon-ubuntu
Hardware=N/A (API Level 8)
Radio=N/A (API Level 8)
Bootloader=N/A (API Level 8)
Incremental Version=eng.root.20101014.171514
Release Version=2.1
SDK Version=7

apprentice01 said:
I have run system info says got no radio
here's a print out
# Build #
ID=ERE27
Product=e1000_klx1
Device=e1000_klx1
Board=unknown
CPU ABI=armeabi
CPU ABI 2=N/A (API Level 8)
Manufacturer=unknown
Brand=yusu
Model=e1000_klx1
Type=user
Tags=test-keys
Finger Print=yusu/e1000_klx1/e1000_klx1/unknown:2.1/ERE27/eng.root.20101014.171514:user/test-keys
Time=1287048036000
User=root
Host=talcon-ubuntu
Hardware=N/A (API Level 8)
Radio=N/A (API Level 8)
Bootloader=N/A (API Level 8)
Incremental Version=eng.root.20101014.171514
Release Version=2.1
SDK Version=7
Click to expand...
Click to collapse
That would be the problem. I'm sure of it. Then again... if you had no radio then I fail to see how your phone is even booting. You're probably using a rom that is incompatable with the radio that you have installed. What rom are you using?
Reboot to bootloader (power and volume down) and tell us everything that you see on the screen.
You might want to take the sdcard out first so you don't accidently flash anything.

thanks for the reply, when I restart and press volume down and power button I get message and its says factory mode and there is a few options mainly testing hardware also clear flash and that's it, when I posted the results I can see under heading of bootloader said N/A, I have tried many times to load different ROM but just can't I used ROM manager and followed other ways shown on these forums but for some reason this phone is stubborn and can't modify it

apprentice01 said:
thanks for the reply, when I restart and press volume down and power button I get message and its says factory mode and there is a few options mainly testing hardware also clear flash and that's it, when I posted the results I can see under heading of bootloader said N/A, I have tried many times to load different ROM but just can't I used ROM manager and followed other ways shown on these forums but for some reason this phone is stubborn and can't modify it
Click to expand...
Click to collapse
So there wasn't any text on that screen?
Was it a white screen or colorful?
We need the SPL version, radio version, S-ON or S-OFF etc.

thanks for response, I can't see spl version, when it loads factory mode, its got black background with yellow text and blue highlight under heading of version it has uboot ver 1.1.6. the headings are full test item test, version clear flash which is nand type flash and. reboot nothing else

apprentice01 said:
thanks for response, I can't see spl version, when it loads factory mode, its got black background with yellow text and blue highlight under heading of version it has uboot ver 1.1.6. the headings are full test item test, version clear flash which is nand type flash and. reboot nothing else
Click to expand...
Click to collapse
Yeah... I really have no clue what your talking about.
Your sure you have a MyTouch device... right?
Mind taking a picture if you can?
You should have something that looks like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Give me everything above where it says Fastboot USB in red.
If you don't have this screen while holding down the back + power or volume down + power then I would think that you have a different device.

thanks for your help mine looks slightly different has a little black hole on the left but. I think it might not be the same when I bought it the guy said its htc magic but I think it may not be I don't have the same screen come up as you have shown

apprentice01 said:
thanks for your help mine looks slightly different has a little black hole on the left but. I think it might not be the same when I bought it the guy said its htc magic but I think it may not be I don't have the same screen come up as you have shown
Click to expand...
Click to collapse
Looks like you have one of those chinese fakes.