Related
I have a Cingular 8125 and I love it, well, if I can get WiFi and the rest of the connectivity to work with my T-Mobile US account. The phone is unlocked.
I had everything working, except for WiFi. This is what I experience, I turn on WiFi, the device gets an IP, but when trying to connect with PocketIE, it just hangs and I get a time out or could not connect error.
Has anyone experienced these problems? I thought it was a one time issue and hard reset the device, and now I can't connect to anything, except to make calls. All data services seem jacked.
Any advice on how to fix this? Should I go with another ROM? If so, whats the best one out there?
Also, am I suppose to be able to use Pocket IE when I'm connected to my laptop via the USB?
Thanks,
Danny
i tried out the 8125's ext rom and its basicly making your device connect only through cingular settings. I couldn't get internet access through wifi. Not even Pocket msn, cuz they restricted it with a proxy. What i suggest is you hard reset your device, then when you finish with the intro crap ( align screen, cut & paste, set password) simply soft reset your device and there you go, you know have a Unbranded Wiza100 !!
Go into start/settings/connections tab/connections, under "mediaNet" select "setup my proxy server". Uncheck the box that says "This network uses a proxy server to connect to the Internet."
Hope this solves your problem.
That does it... but with T-Mobile... I need to use a proxy... is there a way around this? I would like to use the proxy...
I can get it to work when removing the proxy... however, if I have the WiFi on and proxy setting on... it won't work. And if I have proxy setting and wifi off, then GPRS doesn't connect.
Any Advise?
try this out. these are the tmobile settings off the clubimate site. they might be out dated but give it a shot. Also don' tthink theres no solution cuz the wizards coming out on tmobile at the end of this month
For some reason, when I install that cab (by copying it to the device and tapping on it), It doesn't seem to do anything. What am I suppose to see after the installation? It doesn't do anything...
Danny
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
danrw84 said:
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Does wifi turn on? (Does the left LED blink like it does when wifi is turned on?)
If not, then it could be related to a cingular cab - did you install any of the cabs from the original cingular extended rom?
left led does blink.
ive also gotten as far as picking up a network.
i have tried everything, i cannot get my wifi to work at all. i dont know whats up.
the settings i needed (which i replicated for the new rom) on the old rom, was this
I would select networks, MY work network, this connects to the internet.
then in the WLAN adapter i had to manual enter my dns servers.
thats pretty much it to get it to work, but now with this rom it wont
Similar or different problem? Not sure. PARTLY SOLVED!
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Hi NG,
I updated my O2 XDA mini s (German) from OS 1.3.4.2 to 2.16.9.1. (Radio 02.07.10 included). To be honest, I was never really happy with the quality and reliabilty of the radio. 4 out of 5 times it did work, but once in a while, especially while roaming, it gave me a headache. After unlocking and updating to the new version, WLAN looks to be working quite well, at least for connecting to access points, but it seems that it can't browse external websites. VXutils give back a socket error trying to access external (outside my home network) websites/Email.
Internal (inside my home network) connections work like a charm. Termincal Services client accesses my Win2003 Server no problem and I can also connect to a website hosted on my internal server. (http://servername:port).
Whenever I try to connect to external sources, the browser stops afer not successfully "locating" the respective server. On the other hand locating might not be the problem. Performing a ping to an external site with VXutils properly picks up the right ip address but cannot send/receive ping!
GPRS works as supposed. Can connect to sites with no problem.
May be somebody experiences the same problem or, even better, has a solution.
By the way I used @Work for all possible settings. The work profile is set up for both connection types.
Besides that, the new rom is really nice
EDIT Well after some time playing around, I have solved the problem or better the problem partly disapeared. In 'Settings' 'Network Adapters' I switched from Use server-assigned IP address to manual and entered IP, DNS, Gateway, etc. With these settings it everything worked after a soft-reset. Going back to DHCP and soft-reset, it first worked an now it doesn't anymore. At least there is a work around and I'm trying now some other things. All machines currently work with the DHCP settings correct. I will check and keep you updated if the problems comes from Server settings or from something in the PDA EDIT
Lars
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.[/quote]
Darn it. I did. I'll re-wipe and not load the 54g upgrade. Thx.
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
no i didnt load anything
but i want this wifi to work! what the heck!!
try this
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
Danrw. Concerning the registry settings, after patching the os I did change the registry settings. One already existed with the right value as shown in the 802.11g thread. The other one, DotG, I added.
After that, it did pick up a only G router!
As far as setting DNS manually. It is not enough to just cange the dns setting. You have to enter all the information and even after a soft-reset it takes some time to have the settings picked up... Use vxUTIL 'Info'-Screen to check the current settings. I did test wlan before and after applying packages from the extended rom. No change on reliability or performance on WLAN IMHO.
As far as I understand. Your problem is actually connecting to the router/Access Point. For testing please disable all security on your router and do a soft-reset before trying to access. Also since we have heard of several problems with model 9100 not realizing if an access point is available or not. Also change the SSID of your router and if possible the MAC Address of the router.
Don't forget to soft-reset and first try SDIO Adapter inyour pda with auto IP/DNS/etc. settings.
Another thought. Embarassing, but once I messed around with trying to get a new pda online and forgot to disable the mac filter settings in the router, which resulted in being able to see the active router but it didn't let me connect. After those two days I was missing a lot of hair.
Good luck
Lars
summiter said:
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
Click to expand...
Click to collapse
I did but only the minimum. I trimmed down their install to the basics. I narrowed it down to one of two CABs. Either the gprsstall or EnableEONS. I didn't install either of those and I"m now back up and running. Of course, I still can't get it to prefer WiFi to EDGE.
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
eb said:
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
Click to expand...
Click to collapse
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks[/quote]
I do not know if my solution will work for you because I upgraded my rom to 2.16 but lets give it a try. I use d-link DI-524 wifi router. Start menu > Settings > Connections (tab) > Network Cards [I must admit earlier today when I was trying to connect my k-jam to the wifi, I did get as far as it asking me for my authentication code and afterwards it timed-out] --> select your wifi network [at this moment as I'm trying this out my wifi on my k-jam is off] --> Network Key (tab) > it was the key index that I had to change from 1 to 2. Before doing this though, go to your router's wireless configuration page through your webbrowser and make sure the keyX (it looks for d-link this can be from key1 to key4 or at least on mine) and make sure the key index you select on your mda is the same number that is used on your router for code authentication.
Also I noticed after resetting my k-jam that I could get connected to my wifi but I could not surf, in wifi setting on my k-jam I had to hit renew ip and then I was able to surf.
I hope this works for you. Good luck and many late nights.
no luck with this for me
even tried removing wep all together. tried multiple routers.
i can detect the ssid's, but i cant connect to them. times out on the connect.
Mine worked no problem...you may already have had this suggestion but here was my process.
Unlocked with lokwiz
Upgraded
Reset before extended ROM apps installed
Installed total commander
deleted extended ROM
Upgraded again
i re-installed the CINGULAR ROM and WiFi works like a charm
......any clues?
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
kristiandg said:
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
Click to expand...
Click to collapse
What does timestyle and wifirate4 do? I don't have these installed and haven't seen any problems.
I have done hard reset and soft resets and still my wifi is not connecting.
Finally my EDGE is working great but wifi not. Whenever I try to connect my SSID is set to "EMC Wireless Internal" channel 11. I have no idea where this cam from but I can not get rid of it. I have a new FIOS Actiontec router with wireless enabled to my network name, channel 10. And Hitchhiker tries to connect but it keeps getting bumped off.
I have gone into MediaNet and turned off the proxy and checked for it to go onto the internet on Cingular GPRS.
I have not had a problem connecting before on wifi. I wonder if the router is a problem here, or if my phone settings are screwed up.
And ideas?
Thanks
The WiFi - EDGE contengency
*The Bad News*
By default, if EDGE/GPRS is configured to work, WiFi is rendered useless.
You didnt mention what carrier you have. I have Cingular and they even state on there website that If you configure the Edge/GRPS to connect, then WiFi may not work.
*The Good news*
I have my 8125 working with both Edge and WiFi. Heres what I did:
1. Open Connnections and click on the 'ADVANCED' tab.
2. Click on 'SELECT NETWORKS'.
3. The top pull down should be set to 'MY ISP' or, if you have named your WiFi connection something different, select it here.
4. Click 'EDIT' under this pull down and set connection to 'AUTO PICK'. 'OK' back to Network Management screen.
5. The bottom pull down should be set to 'MEDIA NE'T.
6. Click on 'EDIT' under this pull down. This is where you will set up EDGE using your carrier's settings.
7. 'OK' your way back out. Your done.
These settings let WiFi try to connect first. If no WiFi is available then EDGE/GPRS is used.
Good Luck!
Thank you! Worked for me, but videos streamed from orb still aren't working
Wierd-Fi
I also have WiFi problems after installing HTC official upgrade
ROM 2.25.11.1 WWE
Date 5/11/06
Radio 02.25.11
Protocol 4.1.13.12
ExtROM 2.25.11.102
Everything is great except after successful connection to home WiFi it disconnects after maybe 5 to 15 seconds ... network becomes "unavailable" .. no error message. This happens even when not connected to CIngular EDGE/GPRS (flight mode ON then, individually enable WiFi ON for what that's worth). When I delete my home network WiFi entry to force a re-recognition and setup, it recognizes the wireless net just fine (again) but same behavior.
All my settings are already set as suggested by ralugniC8125 in this thread. I had not tried any of the other ROMs with added features/hacks/fixes found on this website ... would any of them behave differently, you think? PHone was bought from Cingular .. I have not done any unlock procedure (don't really need to from a service standpoint but will if necessary to make a new ROM work right).
Any thoughts appreciated...
tskelton said:
Everything is great except after successful connection to home WiFi it disconnects after maybe 5 to 15 seconds ... network becomes "unavailable" .. no error message.
Click to expand...
Click to collapse
I have just purchased an unlocked Tilt from eBay. I have been scanning the wiki for days now, along with other sources, and to no avail. I still cannot get my WiFi to work properly. If any one has had this issue and has found a solution, I would love to know it!
ok, here's a suggestion since none of you have mentioned it.
Diable the MAC (Media Access Control) Binding on the router. This should help.
Maybe yall can help me now I have it attempting to connect however it only connects to gprs and it even shows it has a great wifi signal
Still Wifi-less and Woeful
lobotomy said:
Diable the MAC (Media Access Control) Binding on the router. This should help.
Click to expand...
Click to collapse
Thanks for the suggestion. This did not help unfortunately. I should mention that I have tried to access several different types of routers... with and without security, and while they are showing up as being available, they will not stay connected for more than a second or two.
Any other possibilities?
I've been having a bugger of a time with the Wi-Fi on my 8525. I keep getting a response that the WEP key is incorrect. I was able to connect once, and have since deleted my settings that the Wi-Fi network, but nothing I'm trying seems to get me connected.
Any ideas?
Thanks!
I had a problem with my Wifi working when I first got the phone. But since I wanted to SuperCid the phone I had to downgrade the IPL to do so. I re flashed to the same Cingular 1.34 with IPL 1.06. Since then I have not had any problems with the Wifi.
stsanford said:
I've been having a bugger of a time with the Wi-Fi on my 8525. I keep getting a response that the WEP key is incorrect. I was able to connect once, and have since deleted my settings that the Wi-Fi network, but nothing I'm trying seems to get me connected.
Any ideas?
Thanks!
Click to expand...
Click to collapse
Here's a thought. Why not try the Hitchhiker application. It tends to get round quite a few issues in set up. Also once you've got it working and connected to Wifi you can close it down if you wan to and you'll find it has saved correct settings for your normal way of connecting to wifi. Another benefit is that you can cut the wep key from a text document and paste it into the box it gives you (saves a lot of hassle whenever you need to re-enter the key - which in my case is 28 letters digits long!!) WM5 box as you may have discovered does not allow wep pasting!!
You need to have .netframework installed as well byt the link I give you also has a link for that as well:
http://www.kasuei.com/hitchhiker/
Mike
i recently got att 8525 but i havent able to connect wifi with my home network. it asks for wep key, then shows connecting to network and after a while shows wrong network key...no success so far...i even tried the abive hitchhiker sf and all but no luck...has anyone come up with any solution??? i had np connecting 8125 b4...!!!
btw i use wm5 and the most recent att rom update posted on htc site...
hoping for some solution...
I have similar problem too with my cingular 8525. I unlock it to work with t-mobile and also upgrade to wm6 . Now, I can not connect to my home wlan. If I click on wlan, it show my wireless network. But if I click on internet explorer, it show me the default internet window explorer with at & t and window mobile icons. when I click on either one, it take me to media net log in screen. help me
ok, i dont know how but my wifi started working last night!!! b4 it always looked for IP address and eventually disconnects b4 connecting to home network. so i installed "hitchhiker" but no luck either...so i uninstalled and then tried but this time it said connected to network and as soon as i open IE, it disconnects...it looked like wifi connects but then disconnects or timeout due to power settings, so i changed power settings under wifi settings to best performance and now it just connects right away...
--
ellisos020 said:
Just wanted to let everyone know that switching from "best battery" to "best performance" also solved the "incorrect network key" error for me. Thanks Chakli!
Click to expand...
Click to collapse
Thank You Thank you Thank You. I've been at this for a few days now. It would have to be that simple.
Just remember you need to run the remove proxy cab file if proxy is has been set to use GPRS/WAP. Also make sure the right network interface is selected - like work uses 802.11 etc..
My brother gave me his 8525 after his girlfriend bought him a new phone. I then unlocked it using the unlocker that i found here so that I could use it on tmobile. I am on a prepaid plan and there is no way to get internet through tmobile with prepaid, but the WIFI should still work, but it doesnt. I can get it to connect to a network but when i open IE it wont go to any web adress i type in. Any ideas????
try changing your wifi power mode to best performance
XtreMe_G said:
try changing your wifi power mode to best performance
Click to expand...
Click to collapse
Tried that, and it didnt make any difference.
When I try to go to a site it says " Cannot Connect: Cannot connect with current connection settings. To change your connection settings, tap settings"
I have tried messing around with the settings, but i still cant get it to work right.
I think IE is still trying to connect to the internet via AT&T's network service instead of going through wifi.
Under start>settings>system do you have a proxy folder? maybe it's under programs as well. Look for it. If you do, run disable proxy.
Also go to start>settings>connections>network cards>network adapters
make sure this is reads under "my network card connects to: the internet"
select your 802.11b/g and make it "use server assigned ip address"
Hopefully that helps
hey man thanks for the tips, but it still is not working.
I found my proxy folder and ran disable proxy, my card is set to connect to the internet and it uses the server assigned IP adress.
But now when i try to use the internet it does not give me the "can not connect due to your settings" message, it just keeps trying to load the page but nothing happens.
go to start>settings>connections
click on connections
go to the advanced tab and click on select networks
on the first dropdown make it "my isp"
with the second select "my work network"
That should do it
i think that worked. Im not near a strong wifi signal right now but i think its doing the right thing. Ill know for sure tomorrow.
Thanks Pedro 2K
I was having the same issue on my 8525 after going to 6. Seems fine now. I'll try from work on Monday.
~E
well as it turns out that did not work. I still think it has somtething to do with it trying to connect to AT&t's network.
any other ideas?
i posted in another thread about a similar issue that i have and it is still not solved
some programs that use data on my device will not connect using 3g (pocket outlook using gmail), but they will connect when the wifi is on
it's kind of the opposite of what's going on with yours, but i believe the root of the problem is the same, because we are getting the exact same error message
i believe the problem stems from how/why windows mobile 6 organizes connections; which makes no sense to me whatsoever
under connections i have:
"My ISP"
"MEdia Net"
"Work"
Of course there is nothing even under my isp, or work, yet it wont let me delete them
i tried deleting them manually from the registry and that messed a whole lot of things up, so plz do not make that mistake
my media net settings ARE correct, but why are there so many different connections here, that arent even being used, yet i cant remove them?
what the hell is "MY Isp" ? I thought Media net was my isp...lol
this is confusing and frustrating
any more ideas????
Try disabling and data connections using this:
http://www.modaco.com/content/Pocket-PC-Software/246171/New-FREE-Utility/
This should make sure it is trying to go through wireless. Just a quick question, you are not connected to activsync while trying wifi are you?
ok, since you're using t-mobile, and only just want to use wifi, do this
go to start>settings>connections->connections->advanced
switch both to "my isp", click on edit (either one is fine), delete the modem number in there.
The last thing you need to do is disable the hidden proxy proxy. I dont know exactly how, cause i dont use the AT&T rom anymore, but its somewhere in the start menu, just poke around, there should be a "disable proxy' somewhere
@ surgex0
if you think that's confusing......on the tilt, they've added a 4th one.......AT&T ISP. But basically, whatever settings that was in My ISP, is now in AT&T ISP.