My brother gave me his 8525 after his girlfriend bought him a new phone. I then unlocked it using the unlocker that i found here so that I could use it on tmobile. I am on a prepaid plan and there is no way to get internet through tmobile with prepaid, but the WIFI should still work, but it doesnt. I can get it to connect to a network but when i open IE it wont go to any web adress i type in. Any ideas????
try changing your wifi power mode to best performance
XtreMe_G said:
try changing your wifi power mode to best performance
Click to expand...
Click to collapse
Tried that, and it didnt make any difference.
When I try to go to a site it says " Cannot Connect: Cannot connect with current connection settings. To change your connection settings, tap settings"
I have tried messing around with the settings, but i still cant get it to work right.
I think IE is still trying to connect to the internet via AT&T's network service instead of going through wifi.
Under start>settings>system do you have a proxy folder? maybe it's under programs as well. Look for it. If you do, run disable proxy.
Also go to start>settings>connections>network cards>network adapters
make sure this is reads under "my network card connects to: the internet"
select your 802.11b/g and make it "use server assigned ip address"
Hopefully that helps
hey man thanks for the tips, but it still is not working.
I found my proxy folder and ran disable proxy, my card is set to connect to the internet and it uses the server assigned IP adress.
But now when i try to use the internet it does not give me the "can not connect due to your settings" message, it just keeps trying to load the page but nothing happens.
go to start>settings>connections
click on connections
go to the advanced tab and click on select networks
on the first dropdown make it "my isp"
with the second select "my work network"
That should do it
i think that worked. Im not near a strong wifi signal right now but i think its doing the right thing. Ill know for sure tomorrow.
Thanks Pedro 2K
I was having the same issue on my 8525 after going to 6. Seems fine now. I'll try from work on Monday.
~E
well as it turns out that did not work. I still think it has somtething to do with it trying to connect to AT&t's network.
any other ideas?
i posted in another thread about a similar issue that i have and it is still not solved
some programs that use data on my device will not connect using 3g (pocket outlook using gmail), but they will connect when the wifi is on
it's kind of the opposite of what's going on with yours, but i believe the root of the problem is the same, because we are getting the exact same error message
i believe the problem stems from how/why windows mobile 6 organizes connections; which makes no sense to me whatsoever
under connections i have:
"My ISP"
"MEdia Net"
"Work"
Of course there is nothing even under my isp, or work, yet it wont let me delete them
i tried deleting them manually from the registry and that messed a whole lot of things up, so plz do not make that mistake
my media net settings ARE correct, but why are there so many different connections here, that arent even being used, yet i cant remove them?
what the hell is "MY Isp" ? I thought Media net was my isp...lol
this is confusing and frustrating
any more ideas????
Try disabling and data connections using this:
http://www.modaco.com/content/Pocket-PC-Software/246171/New-FREE-Utility/
This should make sure it is trying to go through wireless. Just a quick question, you are not connected to activsync while trying wifi are you?
ok, since you're using t-mobile, and only just want to use wifi, do this
go to start>settings>connections->connections->advanced
switch both to "my isp", click on edit (either one is fine), delete the modem number in there.
The last thing you need to do is disable the hidden proxy proxy. I dont know exactly how, cause i dont use the AT&T rom anymore, but its somewhere in the start menu, just poke around, there should be a "disable proxy' somewhere
@ surgex0
if you think that's confusing......on the tilt, they've added a 4th one.......AT&T ISP. But basically, whatever settings that was in My ISP, is now in AT&T ISP.
Related
This doesnt seem normal to me as i dont remember this happening when i first got my 8125. When i go to internet explorer after i turn on wifi and connect to my home network it starts loading the page and then the connecting to gprs dialog box shows up. It still seems like it is using wifi but when i click on the wifi signal the gprs time meter is counting up. It seems to me like it shouldnt try to connect to gprs if the wifi signal is already picked up and connected. I thought i remembered reading about this somewhere but ive read so many topics in different places that i cant find it. Is this normal or should i do something to fix it? Thanks in advance.
Ty
anyone?
i just did this last night ..hopefully i rememebr the steps
but what you essentially have to do is remove the connection to the GPRS network and then itll stop connectinig to GPRS brb with an edit ill have to retrace my steps
*EDIT*
ok i think this is how i did it
tap start --settings -- connections tab -- then tap on connections and then make sure that there are no connections for GPRS i know its a little vague but i really forgot how i did it..
can't say that that helped me to much, sorry. I dont want to eliminate the gprs all together, i just dont want it to connect when im using wifi. Please help!
even with wifi on when it goes to sleep it will be the gprs that kicks in - pain in the butt :shock:
im just looking for a fix for this. Unfortunately my work doesnt have wifi so i cant test some things ive read here to see if it still does it. I have tried going into connections-network adapters- and selecting "the internet". Also, when i go to settings--connections--connections-advanced should i have media net, my isp, or my work selected? not sure if this has anything to do with my problem but i just want to make sure. Also, when i am connected to wifi and my gprs timer is also going, which is it using? I have an unlimited data plan so its not the biggest deal if its running but i just want to make sure im using wifi, not gprs.
RegistryWizard?
Are you using the program called "registry wizard"? I know one of the tweaks/registry edits is called GPRS always on. It might be the cause if one of the registry settings is telling the OS to always have a GPRS connection regardless of whether or not there is a WiFi connection or a program is requesting internet data...
Re: RegistryWizard?
justintime07 said:
Are you using the program called "registry wizard"? I know one of the tweaks/registry edits is called GPRS always on. It might be the cause if one of the registry settings is telling the OS to always have a GPRS connection regardless of whether or not there is a WiFi connection or a program is requesting internet data...
Click to expand...
Click to collapse
nope, I don't have that program...
http://forum.xda-developers.com/viewtopic.php?p=320173#320173
You will select either 'My work network' or 'My ISP' depending on which rom you're using. If MEdia Net is selected, it will use GPRS. To tell whether or not it will use GPRS on any of these settings, you hit the 'edit' button. Don't change anything, but check it out, and it will tell you whether it will connect to GPRS if anything is in there. For me, 'My ISP' has 'auto pick' which means if it finds wifi or wifi is enabled, it will use that first, if not then use GPRS. If you have a stock rom, 'My ISP' may not have anything in it, therefore it will use wifi, or nothing. Remember to associate any wireless router you have to either your 'work' or 'internet' profiles.
awsome, looks like that worked. One question though....am i affected in any way by not having it set to media net? Will my edge and everything still work the same if i leave it on my isp? Thanks for the help
Ty
EDIT: It works better than it did but every so often it trys to connect to edge but it usually doesnt unless im inactive for a bit online. Is this supposed to happen?
I now leave my setting set to ISP instead of MediaNet and at first it is just connected to wifi but then as soon as it is done loading a page gprs tries to connect again so i have to hit cancel like 6 or 7 times to stop gprs from connecting. After that it doesnt try to connect but i wish i could avoid this because its a pain when im just trying to find something real fast. I just downloaded opera today and only tried a few pages on my wifi network and from the couple minutes i used it i dont think it ever tried to connect to the gprs while i was using wifi. i will have to test this a little bit more to confirm but is there any way its IE that could be causing the gprs to try and connect even though it has a full wifi signal?
I'm really racking my brain on this one. I would greatly appreciate any ideas, as I've long run out of them.
---Intro---
I have a one week old Wizard (Cingular 8125 variant). It has one of the latest roms with AKU2 on it. Using Registry Wizard, I selected the option to add wireless G compatibility at some point in time. Wireless initially worked after setting my phone and router up per a tutorial on a popular Axim users forum. A day or two later I went to use WIFI and I get nothing. GPRS/EDGE initially worked also, but at the same time it stopped working. I've spent countless hours since trying everything I possibly can to get WIFI to work.
---The problem---
I am not able to connect to the wireless router. My Wizard sits on "connecting" forever then maybe 5 mins later it says unable to obtain an IP address. When I look at the status, it says 0.0.0.0 for the IP address the whole time it says connecting. Since the problem started, I have yet to actually connect using any settings. The first day I configured the wireless it worked perfectly, with WAP encryption and all.
---Some of what I have tried---
On my US Robotics wireless router I've turned mac filtering and all security settings off, making an open network. I removed the WAP setting for the connection on the Wizard as well. I've tried all the suggestions I can find on any WM 5 and 2003se related forums to no avail. I've tried all the various combinations of limiting to B/G only or mixed, using work/internet settings, and deleting WIFI connections and creating new ones. I don't have a proxy setting in any of my connections. The whole time my battery usage is set to the highest (performance) setting and I'm right next to the wireless router. I've tried turning off all proprietary speed enhancement options. I even installed a program (Pocket DHCP) recommended by Axim PPC users to figure out why I'm not receiving an IP. Since I'm not really a DHCP wiz, I can't tell from the results what is causing this.
I'd be greatful if anyone can help me with figuring this one out. Thanks in advance!
maybe a dumb question, but...the wireless part of the router is working fine? did u tryed with a laptop or pc?
did u tried a hard reset?
That's actually a great question. I did connect fine the first day I configured the wireless and made no changes from then until it stopped working, so I'm just assuming that the router is working properly. Unfortunately I don't have access to any other wireless device/laptop to test it with.
I'm getting ready to do a hard reset right now. I was really wanting to avoid this but I think I have no other option. Hopefully this will fix whatever setting was messed up. I have a slight hunch that the registry change for allowing G access was the cause of the problems.
maybe i missed this in the original post, but have you tried making your device use static ip's on the lan instead of dhcp?
Shogunmark:
I didn't try static IP's for two reasons. 1. Firstly I couldn't figure out how to set this up. 2. I don't want to have to fiddle with removing the static IP when I'm away from home trying to use a different wifi hotspot. I would like it to be seamless and just connect when I turn wifi on near any unsecured network (other than the usual pressing OK to connect).
STATUS UPDATE:
I did a hard reset and directly after this I tried to connect to my open network. Amazingly GPRS/EDGE now works, but WIFI still does not. Then I did a factory reset on my USR router then changed the settings back to how it was just set before. Now, I'm connecting. This doesn't make any sense since the settings are the same now but it's working, maybe theres a glitch with the router that this fixed. This small progress seams like a miracle.
Now that I can connect to WI-FI, I have a new problem. When I try to load pages in internet explorer, it says page not found or whatever the standard error message is. I'm so close I can smell it. There must be some setting that needs to be changed on my Wizard.
SUCCESS
I report that I am now absolutely delighted with network connection on my Wizard. After hard reseting the phone and the router, now I can connect to both WIFI and GPRS. Not only that... but also PIE will choose WIFI if I'm connected to a wireless router, otherwise it will default to GPRS/EDGE without any interaction from me. This stuff is really awesome when it works. It is difficult to setup correctly though.
somehow wifi routers r not 100% reliable, every now and then i need to reset my linksys or i cant get ip as in your case...but with a normal reset is enough in my case...
That's good to know. Maybe I didn't even need to hard reset my Wizard, just the router. Now I know to start with the router because it's much easier to reconfigure. This is the first time that I've implemented WIFI on my own network. What happens if a public WIFI spot won't give you an IP anymore? Surely you just can't go and reset it. Granted it's not nearly as old as Ethernet, WIFI has been out for long enough that you think they would have these major kinks worked out.
Nicnatros said:
... but also PIE will choose WIFI if I'm connected to a wireless router, otherwise it will default to GPRS/EDGE without any interaction from me.
Click to expand...
Click to collapse
How did you manage this? I have been struggling for ages to set things up this way. Can you post your settings from settings>connections>connections>advanced>select networks. Also settings>connections>network cards.
I would like to be able to just turn on wlan from comm manager and use wifi to surf and connect to my wireless lan, but if no wifi available to default to my T-mobile gprs connection for surfing. Currently having to manually change the settings "Programs that automatically connect to the Internet should connect using" My Work Network or Tmobile gprs each time I want to use either.
What I want is the option
if wifi available
use wifi
else use gprs
Well my friends and I were like sitting around drinking foo-foo drinks and I just like stumbled upon the answer. Just kidding, it's fun to play the role of your avatar, especially mine.
Settings, Connections tab, Network Cards, Network Adapters tab: My network card connects to Internet
Settings, Connections tab, Connections, Advanced tab, Select Networks: Set first one to My work network. Set second one to MediaNet (or your gprs/edge/etc connection profile).
Now with those set, edit the My Work Network profile and make sure that under the proxy tab check connects to the internet option, uncheck the proxy option. Now edit your MediaNet (or other carrier data plan) and make sure that this contains all options for your carrier like proxy, modem, etc. If you are a Cingular user, go here to verify all settings for medianet. (Note that you will ignore the beginning couple steps when they say to place medianet first in the "select networks" settings. Start after step 6. Also they used the CingularGPRS connection profile instead of the MediaNet one) http://www.pocketpcaddict.com/forum...ular-8125-windows-mobile-5-phone-edition.html
When you connect to your WIFI router first and it asks you if it's work or internet, always select internet. If you are not sure what it's set at, go out of range or unplug your router. Go into network cards and find your router SID, click and hold on it and select remove. Then when you try to connect to your WIFI again it will prompt you for this, make sure you use internet setting.
Now if you have done everything correctly, Internet Explorer will use WIFI when it's turned on and you get a connection. All other times it will default to GPRS/EDGE. I can go from one to the other back and forth without changing any settings, only enabling and disabling WIFI in the comm manager.
Trashman said:
somehow wifi routers r not 100% reliable, every now and then i need to reset my linksys or i cant get ip as in your case...but with a normal reset is enough in my case...
Click to expand...
Click to collapse
Linksys WRT54Gx? if yes look into dd-wrt . stable and has a lot of features . other hardware is supported as well just check on their webby.
yaboc said:
Linksys WRT54Gx? if yes look into dd-wrt . stable and has a lot of features . other hardware is supported as well just check on their webby.
Click to expand...
Click to collapse
I have read many many many posts about people having issues with the wizard and that exact router... I personally would stay away from linksys.. i work in a field that deal with 3rd party routers and such, anytime an end user has a linksys i can usually prove 90% of the time that its the culprit (80% of the time powercycling it does the trick)
Nicnatros said:
Go into network cards and find your router SID, click and hold on it and select remove. Then when you try to connect to your WIFI again it will prompt you for this, make sure you use internet setting.
Now if you have done everything correctly, Internet Explorer will use WIFI when it's turned on and you get a connection. All other times it will default to GPRS/EDGE. I can go from one to the other back and forth without changing any settings, only enabling and disabling WIFI in the comm manager.
Click to expand...
Click to collapse
This seemed to do the trick for me.
I am sure that I had tried all possible combinations previously but what the hell, it is working exactly how I want now.
Thank you
I don't know what is going on but when I'm at home, I woud usually be connected to UMTS/GPRS. Of course, having wifi at home, I would rather use that (speedwise) but when I turn on wifi, I notice that I would be connected to both WIFI and UMTS/GPRS.
FIRST QUESTION:
Which am I utilizing? UMTS/GPRS or WIFI?
Now, considering that I "THINK" I'm using wifi, I would launch PIE and to go to a website, it takes forever...... The task bar keeps saying locating. I have to literally wait and wait before I get to the website.
SECOND QUESTION:
What is going on here?
At any rate, if I turn WIFI off and I'm just connected to GPRS/UMTS, I can browse using PIE without any problems. No "locating..." etc. or waiting.
Please help!
nutnbolt said:
I don't know what is going on but when I'm at home, I woud usually be connected to UMTS/GPRS. Of course, having wifi at home, I would rather use that (speedwise) but when I turn on wifi, I notice that I would be connected to both WIFI and UMTS/GPRS.
FIRST QUESTION:
Which am I utilizing? UMTS/GPRS or WIFI?
Now, considering that I "THINK" I'm using wifi, I would launch PIE and to go to a website, it takes forever...... The task bar keeps saying locating. I have to literally wait and wait before I get to the website.
SECOND QUESTION:
What is going on here?
At any rate, if I turn WIFI off and I'm just connected to GPRS/UMTS, I can browse using PIE without any problems. No "locating..." etc. or waiting.
Please help!
Click to expand...
Click to collapse
While on wifi you can temporarily turn off GPRS using connections hard key below on/off hard key. Just tap on the icon that looks like a pda with two arrows. When off wifi reconnect GPRS using connections in settings menu.
Mike.
Ok. goodie. I was able to shut off the GPRS.
Now I launched internet explorer. The only connection that I'm connected to is my wifi. Still the taskbar is saying "Locating.." taking forever to go anywhere.
nutnbolt said:
Ok. goodie. I was able to shut off the GPRS.
Now I launched internet explorer. The only connection that I'm connected to is my wifi. Still the taskbar is saying "Locating.." taking forever to go anywhere.
Click to expand...
Click to collapse
At least one step in right direction. I'm not so hot on the slow connection. Assume ports and proxies are setup ok.
Perhaps others have some ideas.
Mike
elaborate on the proxy settings so i can check if these are right...
nutnbolt said:
elaborate on the proxy settings so i can check if these are right...
Click to expand...
Click to collapse
In Start>Settings>connections there is an option "edit my proxy server" and within this lots of options.
I will have a different provider from you so don't know what settings should be there. I am also not an expert on this so hopefully someone who is will jump in with some info on this.
One person I was posting with queried why their wifi connection needed any proxy settings as they were not connecting through to their mobile operator but to their home broadband connection. However when they tweaked a setting here their Wifi suddenly started working. See Mariete's last post here:
http://forum.xda-developers.com/showthread.php?t=284867
We need someone with more knowledge!! Anyone?
Mike
Well for one thing, there is no setting for proxy server. Even then when i did find anything to do with proxy server, it is not even activated.
Next..
Phew...Someone else with the same EXACT issue. I was on with Cingular/HTC support today and they really didn't help. I will keep trying new things and checking back to this thread to see if anyone else thinks of an idea.
I have a Apple Airport (802.11g) with no security settings. I have a few laptops on the network and friends who can connect their laptops without any issues.
I actually got tired of this issue. I downloaded and bought netfront. It was something I was going to buy anyway. So after installing it, I tried it again and this time, it goes to the website flawlessly. It must be something to do with IE.
On the other hand, I'm having some issues with shutting down the GPRS again. It keeps turning on automatically.
brmcguire said:
Phew...Someone else with the same EXACT issue. I was on with Cingular/HTC support today and they really didn't help. I will keep trying new things and checking back to this thread to see if anyone else thinks of an idea.
I have a Apple Airport (802.11g) with no security settings. I have a few laptops on the network and friends who can connect their laptops without any issues.
Click to expand...
Click to collapse
everyone make sure they arent on their providers connection that utilizes the proxy.. i dont know about any provider except cingular.. when using wifi stay off MEDIA NET.. everyone's best bet is to make sure they are on the connection for MY ISP, go to settings, connections, connections, advanced, select networks, change the drop down to MY ISP. also make sure wifi is off before doing this, after changing to my isp then turn wifi back on and you should be ok...
shogunmark said:
everyone make sure they arent on their providers connection that utilizes the proxy.. i dont know about any provider except cingular.. when using wifi stay off MEDIA NET.. everyone's best bet is to make sure they are on the connection for MY ISP, go to settings, connections, connections, advanced, select networks, change the drop down to MY ISP. also make sure wifi is off before doing this, after changing to my isp then turn wifi back on and you should be ok...
Click to expand...
Click to collapse
I will give this a try. Thanks. I will keep everyone posted to my hopeful success.
Absolutely fantastic!!!
Hi All,
First of all, let me tell you that I was also suffering from the same problem of MediaNet proxy settings. I've done the same changes asked by "shogunmark" which really sounds good logicaly. And my wifi connection started working miraculously! Yes, it is miracle for me as I am trying to connect to WiFi for last 3 days! Thanks a lot again...
I got it to work as well. However, I couldn't use "My ISP" connection as it was pointing to a Cingular domain. I ended up creating a new one called Home and it works fine. I do have a question. Under Settings/Connections/Connections/Advanced/Select Networks...
What does everyone have selected in both drop downs? I had to select my new Home connection for both to get WIFI to work.
that cingular domain/AP is only used for edge/3G data with no proxy.. this is why this is used for wifi.. theoretically MEdia net would work if it didnt have the proxy... but the phone doesnt look at the AP name when on wifi, only the proxy, you shouldnt have needed to create a new connection!
shogunmark said:
that cingular domain/AP is only used for edge/3G data with no proxy.. this is why this is used for wifi.. theoretically MEdia net would work if it didnt have the proxy... but the phone doesnt look at the AP name when on wifi, only the proxy, you shouldnt have needed to create a new connection!
Click to expand...
Click to collapse
ok, so I should be able to keep Media Net on the top drop down and My ISP on the second drop down? I assume I should just be able to use the Comm Manager to switch between WIFI and the Cingular Data Connections?
i just got my phone not a week ago(the Sprint HTC Touch) and just realized that my company does not allow phones with internet access, i was wondering if there was a way i could disable the internet on the phone, so that i dont accidentally fat finger it and open something up... thanks in advance
How about turning off "Data Connection" from the Comm Manager?
i havent tried it, but have you tried deleting the modem settings?
you know, the ones that dial out #777. or maybe you can just get it to dial elsewhere
as far as i know there is no way to do that without deleting the #777 connection in setting/connections/manage current connection.
But then you will not be able to send picture and video message. As that is the same connection it uses.
Also as soon as you soft reset the device. the connection is back again.
Really I don't understand how your company is able to put a cap on this, as most every cell phone now and day can access the internet. Even if it's not activated on the phone, you can still access for a use per minute charge.
And I'm not just talking about pda/phones.
Unless I'm wrong. But i have yet to find one that doesn't.
Call Sprint and have them "Disable NAI Functionality" on your phone. It's a service feature that restricts your device from accessing any kind of data.
settings->connections->connections->advanced->select networks
there are some texts showing "programs that automatically connect to the internet should connect using"
and a dropdownbox
select the dropdownbox item which is not called something like "my isp"
but pick the one thats called something like "my network"
then all programs trying to access the internet will be forced to use activesync as internet connection and if activesync is not connected they will fail!
thanks.
I have been trying to figure this out for ages. Thanks for your help.
thanks for all of your help, i dont agree with my company, but i really like this phone, i just need to show them that it does not work for a few months then after they stop checking i can re-enable it.
Hey, i've only had this phone for a little over a month, i've done a couple things to it that could be the problem. When i turn wifi on, it won't find any networks... even my own in home network when i'm 6 feet away from it. It used to work like a charm. But i dont know what did it...like i said, it could be one of 2 things, or both. Problem is i dont remember when it stopped working since i dont use it that often. I "upgraded" to wm6.1 and i also did a kaiser tweak.... not sure which one did it, all i know is now my wifi won't find any networks when it used to find them. Please help...
you uk? some roms dont pick up certain channels theres a cab for it some were try that
Is your proxy settings off? Try this
1) Start
2) Settings
3) Connections
4) Under Media Net --> Set Up My Proxy Server
5) "This network connects to the internet"
make sure that box is check
6)"This network uses a proxy server to connect to the internet"
Make sure that is check off
Hope that helps