Related
Hello guys,
my s100 died 1 week a go and i got a new wizard (that I love).
Anyway Im selling the rests of my dead (poor him) friend:
1 Lcd screen (protected from day 1 so no scratches on it...the protector its still on it) - The problem didnt affect the screen that should work fine.
1 Battery
1 Leather case (Agenda style)
1 pen
If someone is interested on the whole package can make an offer here on on Pm. Tks!
Bye
I Would be interested. I am in India. And would require more parts of the s100 could u send me the complete handset including the LCD + Battery+ Pouch . Where are u from and howmuch will u charge for it.
can u make an offer?
i'm interested for only one small part, a frontal speaker used for calling...i'm from italy
How much you want for this part?
Rhyr said:
i'm interested for only one small part, a frontal speaker used for calling...i'm from italy
How much you want for this part?
Click to expand...
Click to collapse
hi, go on Ebay and buy this as I did once:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=320037342618
Its exactly the same speaker that you find inside your s100... I did try on my phone but it didnt resolve the issue, so I guess it was a major soundboard failure and I didnt investigate anymore since I bought a new one ..but for 6 euros I suggest you to try...plus, the seller is in italy and he is really kind and serious.
Thaks for your reply, my problem is only the speaker because i've broken it, i hope to resolve the problem...
Which LCD display is it? Samsung or Topoly?
I have no idea, where can I check it out?
Look at the back of the LCD:
http://wiki.xda-developers.com/index.php?pagename=MagicianHardwareOverview
60H00032-00 is Samsung LTP280QV-E01
60H00037-00 is Toppoly TD028STEB1
futaris said:
Look at the back of the LCD:
http://wiki.xda-developers.com/index.php?pagename=MagicianHardwareOverview
60H00032-00 is Samsung LTP280QV-E01
60H00037-00 is Toppoly TD028STEB1
Click to expand...
Click to collapse
Sorry but I went in holiday all this time...that's why I didnt follow up here. it's a samsung screen.
1 Lcd screen
hi just seeing if you still have the Lcd screen for sale and how much you selling the screen for thanks
iain_2006 said:
hi just seeing if you still have the Lcd screen for sale and how much you selling the screen for thanks
Click to expand...
Click to collapse
Yes I have it and I sell it for 45 euros + shipping cost
I dropped my phone and ran over with car wheel. .. Here's how it seems now
Guarantee does not apply under these conditions .. Can it be replaced ? .. In general is there a spare part for this in the SE production line for replacement parts...
Sorry for my bad English (google translate )
does the phone still work? does it turn on?
I' m sorry to hear that ! and I think it can be repaired at the SE's factory
Good luck to you !
it can be replaced, go to ebay.com and check for Xperia X10 "Digitizer"
also you can replace the housing of the entire phone and also the buttons.
all the pieces are there, you just need the knowledge to put it all and in some cases a good glue
Ahh i just did that to my phone as well. The touch still works ect just need the new cover. I looked around and its gonna be about $100 at the most to fix it
im willing to buy the broken phones if it still works and they are x10i's send me a pm if you want to sell it.
Yes..phone works whithout any problems.. Display isn't broken..
not good still under warranty
try to make a story what fits the conditions of you guarantee
I tried it once with my W580i when I completely broke its display and guess what... they made it for me
good luck
the X10 screen seems very durable, mine is little broken also, and thanks to the thin cover that is has on top, you can't feel the broken screen, just see it.
Also the touch screen is working fully functionally like nothing has happened
The only thing i like it about SE is the high Quality Built mobiles ... my friend bought an i phone 3GS when it was new and after a week he dropped it and the screen broke into pieces and was unusable .. i dropped my x10 on asphalt in the street many times and i see only little scratches ... anyway i'm sorry for your x10 and better to check with warranty
chrismorgann said:
Ahh i just did that to my phone as well. The touch still works ect just need the new cover. I looked around and its gonna be about $100 at the most to fix it
Click to expand...
Click to collapse
i sent you a pm but not sure if you got it website is acting funny and it doesnt say i sent the message. anyway im willing to offer you $100 dont care if the screen is broken or if the case is broken as long as the inside as still good and not broken. let me know
I too had my front screen & digitizer completely shattered when a bus ran over it !!
Got it fixed at a SE Service center but it took two months for them to procure the parts ( LCD & Digitizer) & fix it at the cost of ~ 213 $
farhan032 said:
Got it fixed at a SE Service center but it took two months for them to procure the parts ( LCD & Digitizer) & fix it at the cost of ~ 213 $
Click to expand...
Click to collapse
Mmm when i rang up optus they just went on and on about charges. 1st charge is sending it away 2nd charge is like $50 for sony to look at it then 3rd charge is how ever much it costs fix and it could take up to 6 weeks. wasnt too pleased. So i guess my option now is ebay to get a new screen.
hey friends , my hd2 was working very well untill touch screen stopped responding to any touch .. i haven't dropped nor damaged it anyway , it just happened suddenly ..
i found someone said it may be digitizer ribbon related proplem so i did what he advised :
[ Press the top of the red button (when pushing on the top your pushing the ribbon).
Press the bottom of the red button thus releasing the stress on the ribbon.
Press the green button. ]
i got it working for sometime then after i press on the red key it stop working again ..
please can anyone help me to fix this proplem .. ?
I got the same problem
Hi guys,
I have the same problem with my LEO 512, each time I try to reboot the device (Long pressing the power button) the touch screen hangs, but the buttons working properly, and whenever I activate the device by pressing the power button, or rejecting a call with it also the screen hangs.
I think there is a short circuit between the power button and the screen.
Anyone has any idea what to do to fix this issue???
Thanks
good day, unfortunately is a defect hd2 the only thing to do is send it in for service or replace the touch, have just made my warranty is also changing the screen and putting touch screen no longer equal to the original but different. the screen much more crisp and bright and the touch with a stunning response
mmaaggss said:
good day, unfortunately is a defect hd2 the only thing to do is send it in for service or replace the touch, have just made my warranty is also changing the screen and putting touch screen no longer equal to the original but different. the screen much more crisp and bright and the touch with a stunning response
Click to expand...
Click to collapse
I agree with you, I already sent it to HTC service yesterday, and first thing came to his mind that they would replace the "screen" or the touch or "both" , but he will check the power button problem first.
By the way, I got link (unfortunately I will not be able to submit it as I'm still new to the forum) this would help you. It is in the "Touch screen won't work" under the "General HTC HD2 discussion" in "HTCHD2forum(.com)"...
Thanks
John.Massiass said:
I agree with you, I already sent it to HTC service yesterday, and first thing came to his mind that they would replace the "screen" or the touch or "both" , but he will check the power button problem first.
By the way, I got link (unfortunately I will not be able to submit it as I'm still new to the forum) this would help you. It is in the "Touch screen won't work" under the "General HTC HD2 discussion" in "HTCHD2forum(.com)"...
Thanks
Click to expand...
Click to collapse
hey john , to which HTC branch you sent ?!
did he tell you that he can replace the digitizer only ?!!
& what about the cost ?!
also what is the important info. i can find in this forum ?
This is a common problem with the 512 HD2's. I have found that although some temporary fixes do help, such as using only the green button to wake the screen, and holding certain parts of the screen while pressing others do work in a pinch, but only a digitizer replacement will fix it permanently. The replacement digitizers are much better, and do not have the bug. Replacing the LCD with the newer one results in a much nicer picture.
Both of these parts can be found on eBay, and there are teardown videos on youtube to tell you how to replace them, saving you a fairly large amount of money if you are no longer under warranty.
needo said:
hey john , to which HTC branch you sent ?!
did he tell you that he can replace the digitizer only ?!!
& what about the cost ?!
also what is the important info. i can find in this forum ?
Click to expand...
Click to collapse
Hi Needo,
I went to El Mohandeseen branch (Jovi Tronix), they have already replied me that they will have to replace the whole LCD screen with the digitizer, costing about 1,400 EGP (232$) which was a total loss for me .
Of course I refused, but thanks to "Cappii" who posted after you, I found the LCD screen with the digitzer in "ebay" which would cost about 475 EGP (78.5$) using "Edfa3ly.com service"!!!
A big thanks to you "Cappii"
I'm thinking of going to "Abd El Azeez street" first and check how much would it cost (if applicable), it would be faster than waiting for 2 to 4 weeks till I get the LCD screen from the US.
Wish you best of luck.
John.Massiass said:
Of course I refused, but thanks to "Cappii" who posted after you, I found the LCD screen with the digitzer in "ebay" which would cost about 475 EGP (78.5$) using "Edfa3ly.com service"!!!
A big thanks to you "Cappii"
Wish you best of luck.
Click to expand...
Click to collapse
Anytime. If you do the repair yourself, make sure that you pay .attention to the connectors on the bottom of the main board. There are a few that are a little tricky. Overall, it's not an easy phone to repair, but it's a lot easier than iPhone 4's or HTC Arias.
cappii said:
Anytime. If you do the repair yourself, make sure that you pay .attention to the connectors on the bottom of the main board. There are a few that are a little tricky. Overall, it's not an easy phone to repair, but it's a lot easier than iPhone 4's or HTC Arias.
Click to expand...
Click to collapse
Yes, I've watched how to disassemble and replace the touch screen videos on you tube before, I noticed that it is very complicated and tricky, but I like this kind of stuff, any way.
cappii said:
This is a common problem with the 512 HD2's. I have found that although some temporary fixes do help, such as using only the green button to wake the screen, and holding certain parts of the screen while pressing others do work in a pinch, but only a digitizer replacement will fix it permanently. The replacement digitizers are much better, and do not have the bug. Replacing the LCD with the newer one results in a much nicer picture.
Both of these parts can be found on eBay, and there are teardown videos on youtube to tell you how to replace them, saving you a fairly large amount of money if you are no longer under warranty.
Click to expand...
Click to collapse
Thanks cappii for your help , i think i'll do that ..
John.Massiass said:
Hi Needo,
I went to El Mohandeseen branch (Jovi Tronix), they have already replied me that they will have to replace the whole LCD screen with the digitizer, costing about 1,400 EGP (232$) which was a total loss for me .
Of course I refused, but thanks to "Cappii" who posted after you, I found the LCD screen with the digitzer in "ebay" which would cost about 475 EGP (78.5$) using "Edfa3ly.com service"!!!
I'm thinking of going to "Abd El Azeez street" first and check how much would it cost (if applicable), it would be faster than waiting for 2 to 4 weeks till I get the LCD screen from the US.
Wish you best of luck.
Click to expand...
Click to collapse
Thanks too much john , it's really great idea to use (edfa3ly.com) ..
also i've found someone can fix it for about 500 L.E (may be 400), they say he is expert with HTC & iPhone devices ..
if i repaired it myself , it will cost me about 300 L.E only , but with some risk as i heard that separating digitizer from touch screen can break it !
also i'll have to wait for about 2 or 3 weeks ..
i'm not sure about what i should do ..
what do you think ?!
& what will you do & why will you change LCD (i think the proplem is just related to digitizer ) & did you found it in " abd el aziz " ?!
& Thanks in advance sir
needo said:
Thanks cappii for your help , i think i'll do that ..
Thanks too much john , it's really great idea to use (edfa3ly.com) ..
also i've found someone can fix it for about 500 L.E (may be 400), they say he is expert with HTC & iPhone devices ..
if i repaired it myself , it will cost me about 300 L.E only , but with some risk as i heard that separating digitizer from touch screen can break it !
also i'll have to wait for about 2 or 3 weeks ..
i'm not sure about what i should do ..
what do you think ?!
& what will you do & why will you change LCD (i think the proplem is just related to digitizer ) & did you found it in " abd el aziz " ?!
& Thanks in advance sir
Click to expand...
Click to collapse
Hey Needo, What's up?
I didn't go yet to "Abdel Azeez street" but I'm willing to.
I prefer to have someone fix it for me; as it will be with less risk. But there is an advantage regarding getting the stuff from the US that you know they are brand new, not used.
I'm not expert in the hardware stuff, but this is the feedback I got from HTC that the whole LCD should be changed; this is why I need someone else to check it.
Could you please tell me more about this one you found, who can handle the HTC and I Phone???
Thanks my friend and wish you fix your phone soon (so do I )
Best regards,
John
+20 100 1777 053
John.Massiass said:
Hey Needo, What's up?
I didn't go yet to "Abdel Azeez street" but I'm willing to.
I prefer to have someone fix it for me; as it will be with less risk. But there is an advantage regarding getting the stuff from the US that you know they are brand new, not used.
I'm not expert in the hardware stuff, but this is the feedback I got from HTC that the whole LCD should be changed; this is why I need someone else to check it.
Could you please tell me more about this one you found, who can handle the HTC and I Phone???
Thanks my friend and wish you fix your phone soon (so do I )
Best regards,
John
+20 100 1777 053
Click to expand...
Click to collapse
Hi needo, please tell me more about this guy you found who is fixing htc devices.
Thanks
cappii said:
Anytime. If you do the repair yourself, make sure that you pay .attention to the connectors on the bottom of the main board. There are a few that are a little tricky. Overall, it's not an easy phone to repair, but it's a lot easier than iPhone 4's or HTC Arias.
Click to expand...
Click to collapse
I replaced the screen on my i4 2 times. I think fixing a HD2 is a much bigger PITA
John.Massiass said:
Hey Needo, What's up?
I didn't go yet to "Abdel Azeez street" but I'm willing to.
I prefer to have someone fix it for me; as it will be with less risk. But there is an advantage regarding getting the stuff from the US that you know they are brand new, not used.
I'm not expert in the hardware stuff, but this is the feedback I got from HTC that the whole LCD should be changed; this is why I need someone else to check it.
Could you please tell me more about this one you found, who can handle the HTC and I Phone???
Thanks my friend and wish you fix your phone soon (so do I )
Best regards,
John
+20 100 1777 053
Click to expand...
Click to collapse
sorry for being late in reply john ,
i sent it to this guy in " el srag mall " in shop called " Win Mac " he told me that he will change touch ( digitizer ) for 500 L.E in 2 days & he did it .. after i recieved it , it was working fairly good , but not like before .. then i tried to install WP7 , when it booted to welcome screen , found that i've no touch at all ..
returned back to WM 6.5 touch screen working , but not very properly .. tried to install NAND Android it gave me strange line of no.s & stuck at GO GO GO when i try to enter CWM ...
tried to boot into SD android Build , i got the same problem ..
so i decided to install WP7 again & sent it to him & told him about the problem , he told me to leave it & he'll fix it .. after 4 days i went to him & he told me that he tried to change digitizer for 2 times , but it's not working properly (in the best case , only the lower half of the screen got working) so he'll change LCD also ( the strange thing that he told me that i won't bey for that !!! & he will take my LCD instead ) ..
really i don't know if i should believe in what he say or not , but anyway i've nothing to do .. i'll wait to see what will he do !
what do you think ?!
Just wanted to chime in. I have heard various reports of having to change both the LCD and touch, although on my personal experience, the touch seems to fix it. Now, separating the LCD from the touch is a fairly simple process. Once the boards are removed, turn the unit over so that the touch and lcd are up. Heat the touch with a good hair dryer for about 3 minutes, and slowly lift with a plastic separator while its still very hot. Lift from the top, not the bottom.
There is a lot of tape on the bottomod the LCD. Heat LCD with the hair dryer, and slowly lift, keeping the frame flat on a table. If the frame warps, it will be next to impossible to reseat the touch and LCD. Make sure it stays flat.
Take your time and pay attention to all the wires. Take pics to reference where everything is. There is little to no tolerence for error on the rebuild.
I got it fixed
cappii said:
Just wanted to chime in. I have heard various reports of having to change both the LCD and touch, although on my personal experience, the touch seems to fix it. Now, separating the LCD from the touch is a fairly simple process. Once the boards are removed, turn the unit over so that the touch and lcd are up. Heat the touch with a good hair dryer for about 3 minutes, and slowly lift with a plastic separator while its still very hot. Lift from the top, not the bottom.
There is a lot of tape on the bottomod the LCD. Heat LCD with the hair dryer, and slowly lift, keeping the frame flat on a table. If the frame warps, it will be next to impossible to reseat the touch and LCD. Make sure it stays flat.
Take your time and pay attention to all the wires. Take pics to reference where everything is. There is little to no tolerence for error on the rebuild.
Click to expand...
Click to collapse
Thanks Cappii, I already have seen that and I assure you, it's a very complicated and delicate process which needs much accuracy.
needo said:
sorry for being late in reply john ,
i sent it to this guy in " el srag mall " in shop called " Win Mac " he told me that he will change touch ( digitizer ) for 500 L.E in 2 days & he did it .. after i recieved it , it was working fairly good , but not like before .. then i tried to install WP7 , when it booted to welcome screen , found that i've no touch at all ..
returned back to WM 6.5 touch screen working , but not very properly .. tried to install NAND Android it gave me strange line of no.s & stuck at GO GO GO when i try to enter CWM ...
tried to boot into SD android Build , i got the same problem ..
so i decided to install WP7 again & sent it to him & told him about the problem , he told me to leave it & he'll fix it .. after 4 days i went to him & he told me that he tried to change digitizer for 2 times , but it's not working properly (in the best case , only the lower half of the screen got working) so he'll change LCD also ( the strange thing that he told me that i won't bey for that !!! & he will take my LCD instead ) ..
really i don't know if i should believe in what he say or not , but anyway i've nothing to do .. i'll wait to see what will he do !
what do you think ?!
Click to expand...
Click to collapse
Hey Needo, I'm sorry for hearing that about your phone, I wish that it would be recovered soon, and this guy would be as honest as he said. I feel that he sensed that it's his fault to break the LCD. Anyways I wish that it would be fixed by now.
About me, I went to "Abdel Azeez street", hoping to find someone who might know something about this device, and you know what, I found that many people there already working with experience in Iphone and HD2. And I found that they fix it while you are with them to make sure that they don't cheat you, or fix it with used spare parts. For me, I found that guy who changed the touch in front of me with a new sealed one, it was a process of about 3 interesting hours, which cost me 550 EGP (91$). Of course it wasn't in the best quality as there are some dust between the LCD and the touch screen, and there is some light coming out from the bottom of the phone between the frame and the touch, but I consider them as minor losses . It's working perfectly now at last.
If you ever wanted his contact, I would be glad to forward it to you anytime.
cheers.
Hello,
i cracked my HD2 screen (digitizer), i purchased new one, but the cracked one was working and i was not in a hurry to change it. After a minor drop, the LCD touch screen cracked under the cracked digitizer and now i have black screen...
Now also i have to purchase LCD screen, but i saw that there is ready to use screen+digitizer(and of course more expensive than screen and digitizer alone) .
My question is - what will be easier to change - ready to use digitizer + screen, screen and digitizer alone or there is no difference. I'm asking this, because I'm wondering should i sell the digitizer (if i can) and buy the ready to use screen+digitizer, or to purchase the screen and to use it with the already received digitizer.
If you can afford it you have to go with the all in one. Too much can go wrong during assembly and you should avoid it if you can.
yup, separating and installing them separately is a pain in the arse, its always better to do it in the one job if you can afford the initial high cost. My LCD panel needs replaced due to light bleeding, but I cant be arsed, the digitiser is likely to fail in the future anyway being an HD2 so ill wait and just do the two of them together.
OK, thank you.
I've watched 2 or 3 "how to change digitizer" videos. Is there a video for changing the lcd+digitizer or its the same as the digitizer change? I have to disassemble the whole phone to change the digitizer...
LexHammer said:
OK, thank you.
I've watched 2 or 3 "how to change digitizer" videos. Is there a video for changing the lcd+digitizer or its the same as the digitizer change? I have to disassemble the whole phone to change the digitizer...
Click to expand...
Click to collapse
there is a vid somewhere, ill have a look later, but essentially yes. you need to remove the whole lot, the only difference between doing them both and doing them separately is that the two panels are stuck to each other, and its that process of separating or putting back together that's really tricky and people have ended up damaging one or the other trying it.
What about the difference in the EU and T-Mobile versions, like in the digitizer (soldering and insertion) Is there a difference too, if i take the whole "pack" (LCD + Digitizer) and what should i look for if there is a difference?
LexHammer said:
What about the difference in the EU and T-Mobile versions, like in the digitizer (soldering and insertion) Is there a difference too, if i take the whole "pack" (LCD + Digitizer) and what should i look for if there is a difference?
Click to expand...
Click to collapse
If you buy combo(LCD+digitizer) there's no problem to replace it to whatever version of HD2 you own: combo is interchangeable on both versions!
OK, Thank you!
I'm asking because i asked some buyers on ebay, and they told me "Sorry, my friend, but this is for T-mobile version" But on the pictures, they are all the same.
I had my EU hd2 digitizer changed too when it was broken, and when it was changed to a tmous replacement, they couldn't get the promixity sensor working.
Now I dunno if that's a defect from the screen or because it's a incompatility problem, but a further gsensor-working-in-wm6-but-not-in-android-problem in my other replacement mashup hd2 hybrid EUTMOUS frankenstein phone suggests that some parts may not be interchangeable.
You should just make sure that it's a EU digitizer so you won't run into further problems.
Sent from my HTC HD2 using XDA
But on a already assembled combo pack (LCD + digitizer) how to know if the digitizer is EU version, beside the T-mobile logo.
hengsheng120 said:
I had my EU hd2 digitizer changed too when it was broken, and when it was changed to a tmous replacement, they couldn't get the promixity sensor working.
Now I dunno if that's a defect from the screen or because it's a incompatility problem, but a further gsensor-working-in-wm6-but-not-in-android-problem in my other replacement mashup hd2 hybrid EUTMOUS frankenstein phone suggests that some parts may not be interchangeable.
You should just make sure that it's a EU digitizer so you won't run into further problems.
Sent from my HTC HD2 using XDA
Click to expand...
Click to collapse
I doubt it's a relationship between digitizer and g-sensor/proximity sensor...
---------- Post added at 02:37 PM ---------- Previous post was at 02:36 PM ----------
LexHammer said:
But on a already assembled combo pack (LCD + digitizer) how to know if the digitizer is EU version, beside the T-mobile logo.
Click to expand...
Click to collapse
There's no way to figure out this...
bib*oops said:
I doubt it's a relationship between digitizer and g-sensor/proximity sensor...
---------- Post added at 02:37 PM ---------- Previous post was at 02:36 PM ----------
There's no way to figure out this...
Click to expand...
Click to collapse
Let me clarify that; my hd2 EU first had its digitizer+LCD replaced with a TMOUS version, and the proximity sensor stopped working,
then the the mobo was replaced by a tmous mobo in the same EU housing and the accelerometer and magnetometer does not work properly (accelerometer works in wm6.5 but not android), but the proximity sensor worked.
It's not just me having a hardware replacement problem, there's a significant amount of posts by other users about replacement parts not working properly. So everyone should be at least very cautious about using them because replacing with other parts may cause other problems.
my buddys HD2's touch screen suddenly stopped working.
he gave me the phone for $50.
i guess ima have to do lil work
I need some help with choosing the combo
Which one should i take and why on one the second item there are those big cable-like things.
N1 - http://www.ebay.com/itm/LCD-and-DIG...ccessories&hash=item43adebdc7d#ht_3076wt_1110
N2 - http://www.ebay.com/itm/NEW-lcd-Tou...ltDomain_0&hash=item3a67e44659#ht_2175wt_1344
Will i need to solder them together or they are already soldered (welded junction or whatever)
Thank you!
Anybody?
LexHammer said:
I need some help with choosing the combo
Which one should i take and why on one the second item there are those big cable-like things.
N1 - http://www.ebay.com/itm/LCD-and-DIG...ccessories&hash=item43adebdc7d#ht_3076wt_1110
N2 - http://www.ebay.com/itm/NEW-lcd-Tou...ltDomain_0&hash=item3a67e44659#ht_2175wt_1344
Will i need to solder them together or they are already soldered (welded junction or whatever)
Thank you!
Click to expand...
Click to collapse
Both versions are OK, but I would choose the first one.
There's no need for soldering(vers. 2): it's more like a packaging thing in order to get it mounted on chassis.
hengsheng120 said:
I had my EU hd2 digitizer changed too when it was broken, and when it was changed to a tmous replacement, they couldn't get the promixity sensor working.
Now I dunno if that's a defect from the screen or because it's a incompatility problem, but a further gsensor-working-in-wm6-but-not-in-android-problem in my other replacement mashup hd2 hybrid EUTMOUS frankenstein phone suggests that some parts may not be interchangeable.
You should just make sure that it's a EU digitizer so you won't run into further problems.
Sent from my HTC HD2 using XDA
Click to expand...
Click to collapse
I guess its because you/they lost the little glasses that connect the display and the sensor.
Its easy to loose them as they fall out after you take the screen from the housing.
I lost them a few seconds ago and think that i know what wont work when i reassemble
@topic
there is generally no problem removing display from touchscrren. just make it hot with a fan or oven ~80°C is okay. and with a flat knive or iron-wire go for the glue.
If you do this you need new glue-tape. Mostly you get this from china very cheap but takes a while.
If your screen is broken now i would recommend to take a combi pack as you have no glueing, no alignment problems and so on.
its not very hard but kills some time and nerves ;D
OK, so lets do a round up, before i make the purcahse, so I'm sure i will make the right choice.
I'm going to buy this one http://www.ebay.com/itm/LCD-and-DIG...ccessories&hash=item43adebdc7d#ht_3076wt_1110
because its already assembled and much easier to use and IT WILL FIX on my EU version of the phone (Not US T-Mobile)
Only YES or NO will be enough
LexHammer said:
OK, so lets do a round up, before i make the purcahse, so I'm sure i will make the right choice.
I'm going to buy this one http://www.ebay.com/itm/LCD-and-DIG...ccessories&hash=item43adebdc7d#ht_3076wt_1110
because its already assembled and much easier to use and IT WILL FIX on my EU version of the phone (Not US T-Mobile)
Only YES or NO will be enough
Click to expand...
Click to collapse
YES
bib*oops said:
YES
Click to expand...
Click to collapse
The Eu-HD2 is soldered isnt it? This version, from the picture, is the pluged version....
Im not sure because if you change the display also the connector type could be irrelevant.
But if this is the screen from Tmous-HD2, i remember that it was a bit bigger? Is it just the housing or also the display?
=>
Dont buy before this is clear!
(i would open my hd2, look what connector type is inside and buy that one just to be sure...)
And some advise: Try to glue the flex cable from the touchscreen(the one that goes under the end call button reallly close to the display)
This could help to improve the life-span of the cable as its not flexed every time you push the button(try when you hold it in your hands by putting the buttons in the frame and push it, if it flexes the cable fix that!!!)
Otherwise the cable will break one day and the wires will disconnect=> typical problem of not responding touchscreen
hello
my nexus 7's screen cracked after just 4 days of light use .. and now I have a triangular area in the top right of my screen that's not responding to the touch so that now I can't get to the right notification area unless rotate the screen or use a mouse . so I was thinking of replacing it.
since I live in Egypt and I had the tablet shipped to me from the US my only option is getting a screen shipped from ebay and installing it myself. so I was wondering what kind of screen should I get to get the whole touch screen working again.
i've been looking on ebay and was wondering if something like this might work?
http://item.mobileweb.ebay.com/view...1082526272&index=1&nav=SEARCH&nid=34354766081
I am not a very technical person so I am sure what the digitizer is.but I am guessing it's the part that broke to make the screen unresponsive.
so . should I get this one? if not what should I get?
I am looking for something cheap since the shipping cost is a lot.
thanks in advance
just upping the thread. I need the answer desperately
Sent from my Nexus 7 using Tapatalk 2
With screen + shipping + labour charge (to change screen).. Isn't it better if you get a new set and sell off the broken one on eBay? At least it's a new set and problem free.
a new replacement screen costs as much as a new Nexus 7. I cracked mine in January. The only way to use it is to connect a mouse which is pretty lame. Waiting for the newer Nexus 7.
since I live in Egypt. I can't really sell stuff on eBay. and my nexus 7 is the 3G version so I can't afford getting a new one.
I am really confused about the concept of a touch screen, a digitizer and an LCD. what is the differences between them and what do I really need?
if you can help me with eBay links I would much appreciate it.
thanks in advance
There is a guide here on how to change the screen (ok it seems I can't post the link because don't have enough posts. If you go to ifixit and search for nexus 7, there is a guide there)
The touchscreen part (digitizer) is the outer glass.
The LCD is bonded to the glass.
I've only ever seen the lcd and digitizer sold together. It is a lot easier to change them as one unit instead of trying to remove the broken digitizer from the lcd.
As people have said the price of the part outweighs the cost of fixing it, but if you really wanted to do it you should find all the information above.
Lim Wee Huat said:
With screen + shipping + labour charge (to change screen).. Isn't it better if you get a new set and sell off the broken one on eBay? At least it's a new set and problem free.
Click to expand...
Click to collapse
I agree a second hand one though would be a lot more economical
Sent From My Nexus 7 MIUI Warlord
And The Unbeatable [email protected] in Pool Break Pro