Hi guys, the other day I dropped my Dopod. Now the thing reset itself whenever I'm doing things and the only way to get it back is if it powered through the AC Adapter. Does anyone know where I can send my dopod for a repair?
Thanks in Advance.
powerppc said:
Hi guys, the other day I dropped my Dopod. Now the thing reset itself whenever I'm doing things and the only way to get it back is if it powered through the AC Adapter. Does anyone know where I can send my dopod for a repair?
Thanks in Advance.
Click to expand...
Click to collapse
Link here: http://www.pocketpctechs.com/main~unit~O2_XDA_Exec-500~area~repairs~action~updateunit.htm
---
Thanks. I have to send it in for diagnostic.
Related
Hello,
I tried to upgrade my imate with bluetooth (instead of cable, because it is in my job)and now the only thing i see in the screen is "Serial v1.02" I have tried to do a full reset but nothing changes. What can i do??? Thanksss
dherrero said:
Hello,
I tried to upgrade my imate with bluetooth (instead of cable, because it is in my job)and now the only thing i see in the screen is "Serial v1.02" I have tried to do a full reset but nothing changes. What can i do??? Thanksss
Click to expand...
Click to collapse
Bad!! Very, very bad!!! Don't do that again! Didn't you read the part where it says put your iMate in the cradle and be sure it is connected to power? Part of the process of flashing the ROM is to remove the existing one....Whooops! Where did my Bluetooth go?.....Bad!! Very, very bad!!! Don't do that again!
As punishment you must read this entire thread. http://forum.xda-developers.com/viewtopic.php?t=3687. You're luck though, you should know how to fix your problem by the end.
Dave
Thanks
When i connect with hiperterminal i see.....
+SA_USB_Init
-SA_USB_Init
But i dont see any prompt. What can i do? thanks
I also had the same problem, I did read the instructions but my sync cradel was also at work and not with me, So i tried to update over bluetooth, Mine also died, and hard resets did nothing.
But at work the next day i was lucky, i managed to connect as a guest in activesynce with the usb cradel and just run the rom upgrade, i think i was very lucky as only after fixing it did i bother to read the posts you were advided to read.
good luck
john
Hello,
I wonder if anyone can help me...
I went to plug in my Mini USB charger into the Wizard last night to find the actual port had been pushed in, so i can no longer charge it... is this is a common fault and how can I fix this?
Any suggestions, or advice would be great!
Thanks everyone,
Liam
I got the same problem
T Mobile refused to repair it but have sent me a new one
I am still wanting to repair the phone so my dad can have it....
Where can i get a new USB port from without sending it off to anyone to fix it...
intheloft said:
I got the same problem
T Mobile refused to repair it but have sent me a new one
I am still wanting to repair the phone so my dad can have it....
Where can i get a new USB port from without sending it off to anyone to fix it...
Click to expand...
Click to collapse
Try the ebay you'll get it there
Cheers
Try ebay...and read the linky in my siggy for any other suggestions/help.
HI all,
I use a T-Mobile Vario2 for comparison tests in my work and sometimes against test equipment. To make this easier I would like the connector to connect to the RF port just to the top left of the camera.
Does anyone have details on this connector?
Gavin.
Ok,
Found this. Doesn't tell my the type of connect though so if anyone knows that please let me know.
http://www.expansys.com/zoompic.aspx?type=item&i=139772
Gavin.
GavinN said:
Ok,
Found this. Doesn't tell my the type of connect though so if anyone knows that please let me know.
http://www.expansys.com/zoompic.aspx?type=item&i=139772
Gavin.
Click to expand...
Click to collapse
I know it's the same exact adapter for the Motorola T720 sorry I don't know the exact name for the plug itself
GavinN said:
Ok,
Found this. Doesn't tell my the type of connect though so if anyone knows that please let me know.
http://www.expansys.com/zoompic.aspx?type=item&i=139772
Gavin.
Click to expand...
Click to collapse
Might find this useful
http://www.alternativewireless.com/cellular-antennas/adapters.html
Mike
Thanks guys,
I've ordered a couple from Expansys but I'll follow up and try and find out the actual type of connector.
Gav.
Atom Service Manual Needed ?
Please if you have it contact me
Did u get it?
Can I have it?
tjkhattak61 said:
Did u get it?
Can I have it?
Click to expand...
Click to collapse
i need it too..
thanks.
if anyone can get thier hands on one please post it
i need one too to fix the mini USB plug which fell out
thx
If anybody got the service manual, please share it. I am also having the same problem as akromatic, my usb port got ripped off the board too.
Hi all,
my Athena fell down while charging (kiddies.....) - now it seems to me that the connector is broken somehow. I can't chrage the device anymore and don't get contact to my PC anymore.
Warranty exchange isn't possible due to customized ROM. What can I do ?
Dieter
PPC Techs repaired my HTC Universal when the USB connector broke, give them a try:
http://www.ppctechs.com/HTC-Advantage_895/repairs.htm
Thanks galt,
but seems to me a little bit far away.....
Would prefere a source to buy spares and do it by myself or have a repair service in Germany or even Europe...
Dieter
Sorry, I forgot to check your location... HTC might have a repair center in Europe...
dieterpapa said:
Thanks galt,
but seems to me a little bit far away.....
Would prefere a source to buy spares and do it by myself or have a repair service in Germany or even Europe...
Dieter
Click to expand...
Click to collapse
i don't know how it works with "The Phone warehouse" but here in the uk their parent company Carphone Warehouse have usually a flat fee for repairs, maybe ask The Phone Warehouse what they might charge ?
I think you can open and try to solder usb pin on your own.
its should not be that difficult task.
I have done this with my Motoming
Hello,
have already opened the device. Sadly it's not only a standard USB connector but a special HTC connector with about 10 connections...it's nearly impossible to re-solder
Dieter
But I'll ask phone warehouse in UK.
dieterpapa said:
Hello,
have already opened the device. Sadly it's not only a standard USB connector but a special HTC connector with about 10 connections...it's nearly impossible to re-solder
Dieter
But I'll ask phone warehouse in UK.
Click to expand...
Click to collapse
do it if you can as if you solder wrong pins than there would be a problem
and word impossible itself says i m possibles
Bad luck
dieterpapa said:
Hi all,
my Athena fell down while charging (kiddies.....) - now it seems to me that the connector is broken somehow. I can't chrage the device anymore and don't get contact to my PC anymore.
Warranty exchange isn't possible due to customized ROM. What can I do ?
Dieter
Click to expand...
Click to collapse
As a temp setup, why not get a docking base. they normally have a battery charging on them too. Keep you going until you find a repairer. they come up on ebay
Jay
.......Or THIS even?