Database Users

[HELP!] Mini USB Pushed In

Hello,
I wonder if anyone can help me...
I went to plug in my Mini USB charger into the Wizard last night to find the actual port had been pushed in, so i can no longer charge it... is this is a common fault and how can I fix this?
Any suggestions, or advice would be great!
Thanks everyone,
Liam

I got the same problem
T Mobile refused to repair it but have sent me a new one
I am still wanting to repair the phone so my dad can have it....
Where can i get a new USB port from without sending it off to anyone to fix it...

intheloft said:
I got the same problem
T Mobile refused to repair it but have sent me a new one
I am still wanting to repair the phone so my dad can have it....
Where can i get a new USB port from without sending it off to anyone to fix it...
Click to expand...
Click to collapse
Try the ebay you'll get it there
Cheers

Try ebay...and read the linky in my siggy for any other suggestions/help.

RF/Antenna Connector Details???

HI all,
I use a T-Mobile Vario2 for comparison tests in my work and sometimes against test equipment. To make this easier I would like the connector to connect to the RF port just to the top left of the camera.
Does anyone have details on this connector?
Gavin.

Ok,
Found this. Doesn't tell my the type of connect though so if anyone knows that please let me know.
http://www.expansys.com/zoompic.aspx?type=item&i=139772
Gavin.

GavinN said:
Ok,
Found this. Doesn't tell my the type of connect though so if anyone knows that please let me know.
http://www.expansys.com/zoompic.aspx?type=item&i=139772
Gavin.
Click to expand...
Click to collapse
I know it's the same exact adapter for the Motorola T720 sorry I don't know the exact name for the plug itself

GavinN said:
Ok,
Found this. Doesn't tell my the type of connect though so if anyone knows that please let me know.
http://www.expansys.com/zoompic.aspx?type=item&i=139772
Gavin.
Click to expand...
Click to collapse
Might find this useful
http://www.alternativewireless.com/cellular-antennas/adapters.html
Mike

Thanks guys,
I've ordered a couple from Expansys but I'll follow up and try and find out the actual type of connector.
Gav.

Resetting itself

Hi guys, the other day I dropped my Dopod. Now the thing reset itself whenever I'm doing things and the only way to get it back is if it powered through the AC Adapter. Does anyone know where I can send my dopod for a repair?
Thanks in Advance.

powerppc said:
Hi guys, the other day I dropped my Dopod. Now the thing reset itself whenever I'm doing things and the only way to get it back is if it powered through the AC Adapter. Does anyone know where I can send my dopod for a repair?
Thanks in Advance.
Click to expand...
Click to collapse
Link here: http://www.pocketpctechs.com/main~unit~O2_XDA_Exec-500~area~repairs~action~updateunit.htm
---

Thanks. I have to send it in for diagnostic.

Help : con not link to PC!!

Hi , guys, now ,my X7500 can not link to My PC , the note is "unknow device, pls try again", i send the phone to the cellshop, the egngineer said ,the synchronization IC has been broken!
who can give a help ?
where are i can find some interanl pictures of X7500?

http://www.pdacenter.ru/razborka/razbor_htc_athena/

rorydaredkign said:
http://www.pdacenter.ru/razborka/razbor_htc_athena/
Click to expand...
Click to collapse
thanks, but i can not open the site, could you pls give me other adress?

dear, who can help me ?it is very urgent !!!!!

Who can help ?

My car's white - how fast does it go?
And now for some more detail:-
Is the error coming up from Windows, or ActiveSync?
What OS and ActiveSync version are you using?
Have you ever been able to sync?
What ROM is your device using?
Are you using USB or Bluetooth Sync?
If its ActiveSync, you could try deleting any existing profiles within the Application and trying again.
Have you tried both a soft and hard reset of the phone?
Have you tried uninstalling and reinstalling ActiveSync?
Have you got the latest version of ActiveSync?
Have you tried synchronising over bluetooth instead of USB (or vice-versa)?
Have you tried google to resolve your problem?

Digital.Diablo said:
My car's white - how fast does it go?
Click to expand...
Click to collapse
That made me laugh right out loud!

it is ok before 15th,Feb.the software and device is ok.
but some time ,the USB port is not stable , you need to put a book above the USB cable.
one day , the device can not link to PC whatever i shake the cable.i change
a new USB part of the device , but it can not working yet.
the repairer said, the control IC has broken , is it right ?

nmurphy said:
That made me laugh right out loud!
Click to expand...
Click to collapse
Tis an old quote passed down to me as a junior IT tech from the wizards of the mainframe, and illustrates the point perfectly I think.
Veron_fat - when you say you have "change a new USB part of the device", is that the USB cable, or the Mini-USB port on the device?? I had a fault with my first charger where the connection eventually went wrong within the connector on the cable - swapped it out with a new charger and all was well again. I have however also broken an Axim x50v sync port with too much flexing - the connector broke the solder ports on the mobo.
I'd be surprised if you'd broken the IC - can someone else advise if my memory is correct and the USB device controller is integrated into the main CPU. Is this also shared with the USB host controller? I'm thinking that if Veron_fat has the 4 in 1 USB cable, he can test that to see if it is the IC, or the port that is at fault.
I do think though Veron that you've buggered the port, and it will either be a resolder on the port by a skilled electronics engineer, or a new mobo.

Digital.Diablo said:
Tis an old quote passed down to me as a junior IT tech from the wizards of the mainframe, and illustrates the point perfectly I think.
Veron_fat - when you say you have "change a new USB part of the device", is that the USB cable, or the Mini-USB port on the device?? .........
Click to expand...
Click to collapse
1. it is the Mini usb port in device
2. i change more than 4 piece usb cable
3. you mean this divice have not the sperate IC for synchronization?
4. all information from the phone repairer ,i donot belive his voice , but i just want to get some picture of internal view of u1000 to check if there have some IC or something......

veron_fat said:
1. it is the Mini usb port in device
2. i change more than 4 piece usb cable
3. you mean this divice have not the sperate IC for synchronization?
4. all information from the phone repairer ,i donot belive his voice , but i just want to get some picture of internal view of u1000 to check if there have some IC or something......
Click to expand...
Click to collapse
Why not just send it back to HTC for repairs/diagnostics? It might only cost you shipping. Just my 2 cents.

tootallk2000 said:
Why not just send it back to HTC for repairs/diagnostics? It might only cost you shipping. Just my 2 cents.
Click to expand...
Click to collapse
yes, but i have not the guarantee, i am not sure if they can repair this device.
who can give me a adress for the X7500 internal picture!!!
i want to see the stomach!!

I have a PDF of a repair Manuel if you would like it. I uploaded to this link. I hope it helps...TJ
"http://www.mediafire.com/?baidzmnlgow"

TrekkerJmm said:
I have a PDF of a repair Manuel if you would like it. I uploaded to this link. I hope it helps...TJ
"http://www.mediafire.com/?baidzmnlgow"
Click to expand...
Click to collapse
thanks, try it!

Technichally innovative Idea to have Wifi on GENE - Need support from Experts!

hi people!
I am using Gene since last one year and one thing I miss a lot with this phone is the WIFI.... I see registry entries for WIFI but no UI for Settings.
I got 2 thoughts about it:
1. The WIFI hardware is present but the device driver is not installed: so if this is the case, can i get the device driver on internet ?
2. Before GENE i used IMATE KJam. and its dumped and not working now. i was thinking if it is at all possible to de-solder the WIFI devide from IMATE KJAM and solder it on GENE motherboard. If that is possible, can I have the steps with snapshots plssssssssss.
Think people, i have a feeling that this is possible! coz I saw that nothing is impossible for you guys on this forum! so lets make this possible!
PRady

About soldering stuff i dont know and i wont recommend, unless you have some spare money for another phone.
About Wifi hardware: No the hardware is not there. the registry entries represent the Windows Mobile's internal support for Wifi. You can get wifi using an external SDIO card. These cards come with their own drivers in form of cab files and these drivers automatically provide the required UI. For example, in my case, drivers of the card i use add a new tab in Network Adapters applet in settings.

@krazy_about_technology
Since u said u r using the card....could you tell me some details like manufacturer and price !! I jus can't seem to find the card anywhere...

Krazy!!!
Thanks for ur reply man!
I can spare money for another phone.. Could you please show me where to solder that Wifi card.. also pls show where to desolder from IMATE KJAM...
is there a new version of P3400 with WIFI?? If yes, can I have the motherboard layout plssssss
Thanks,
PRady

pradeep7880 said:
Krazy!!!
Thanks for ur reply man!
I can spare money for another phone.. Could you please show me where to solder that Wifi card.. also pls show where to desolder from IMATE KJAM...
is there a new version of P3400 with WIFI?? If yes, can I have the motherboard layout plssssss
Thanks,
PRady
Click to expand...
Click to collapse
Hi Any luck with this?

Working!!!
I am still working on this budddy

I don't think it is possible to remove the wifi part of another phone and solder it to GENE motherboard, or to that matter to any other phone.
This will require the redesigning of the motherboard.

Duron23 said:
I don't think it is possible to remove the wifi part of another phone and solder it to GENE motherboard, or to that matter to any other phone.
This will require the redesigning of the motherboard.
Click to expand...
Click to collapse
+1 for that. I also don't think thats possible, unless the gene Mobo has some future upgrade options. But looking at Mobile Cos, I sincerely doubt that they have ever heard of upgradability

hi I happened to read your post .. the card is called Spectec sdw 821..availaible on amazon for 40 usd

1 simple solution is replace the mobile with sm wifi enabled phone!! dat wont screw ur gene too!!